home › Children › How to make a carnation. Various master classes of complex and simple carnations

How to make a carnation. Various master classes of complex and simple carnations

Carnation is an unusual flower that combines delicate beauty and strict geometry of lines. Each petal has a spectacular carved structure. Many lovers of creating paper crafts do not even try to reproduce the work of nature itself, thinking that this is a very troublesome and time-consuming task.

However, there are several ways to make a carnation out of paper with your own hands, some will be easier to master, others really have several time-consuming steps. In the article we will figure out how to make such a spectacular flower, both voluminous and flat. From the first, you can make a magnificent bouquet and put it in a vase or give it to a friend for a holiday, attach the other to a sheet of cardboard, creating a holiday card.

One thing is for sure, be sure to try to make a carnation out of paper with your own hands, after a detailed explanation, you will be able to make it with ease.

Corrugated paper flower

For such a voluminous carnation, you will need corrugated paper in two colors. In the photo below, red is chosen for the bud and green for the stem. However, the flower can be made in absolutely any color. Carnations are white and purple, burgundy and blue, pink and yellow. What all flowers have in common is carved leaves. How to make a carnation out of paper with your own hands, read on.

Red paper is cut into wide strips, which are folded into several parts, and the edge on one side is formed into small triangles. Try to keep all ends the same. Then the tape is unfolded and the most time-consuming part of creating the craft is performed, namely, folding with a small "accordion", each face of which corresponds to a cut corner. Some omit this process, but after folding, a do-it-yourself carnation made of paper has a more natural appearance.

Rod attachment

After processing, the edge of the workpiece is smeared with PVA glue and attached to the edge of the stick. You can take a thick wire, but before winding the paper, crochet its upper edge so that the flower clings to the rod more tightly. When winding, the paper is collected by hand, and at the end everything is fixed together with threads.

Further work is done on the stem. Using a strip of green, the lower part of the flower is first pasted over, and then gradually descends down along the entire wire. The edges are also smeared with PVA glue. From thin strips, you can make leaves and weave them into the base.

tissue paper flowers

Do-it-yourself paper carnations can be made using a simpler method. You will need thin paper, thread, sharp scissors or tongs. They immediately take a bunch of rectangular leaves folded together. They are folded with an "accordion" 1 cm wide. Then, using sharp scissors, the ends of the workpiece are cut into corners.

A nylon thread is tightly tied up exactly in the middle of the "accordion" and a tight knot is tied. It remains only to carefully level each layer separately with your hands, lifting the parts up.

Making carnations from circles

Do-it-yourself blanks for creating carnations from colored paper are made the same. These are circles cut according to a single pattern. Then each piece is folded in half, then again. The resulting triangles are cut not completely into four parts. Trim off a small center point. And the outer edge is processed with scissors so that many small corners are obtained.

Then the circle is formed "accordion" by sectors. When unfolding the workpiece, a relief part is obtained. This way you can make 5 or 6 elements. Assembly is carried out sequentially. All the petals are put on the wire with a rounded edge from below, one after the other. At the end, they are pressed down with your fingers so that the ends look up. The lower part of the craft is wrapped with threads.

Between the layers of paper, PVA glue is applied to the center of each circle. It remains to wrap the lower part with a strip of green paper and arrange the stem stem in the same way. Now you know how to make paper carnations with your own hands.

The easiest option

Such a carnation is assembled from a strip 4–5 cm wide. In order for the flower to have rounded wavy petals, you need to press and stretch one edge of the workpiece unevenly with your fingers. Attach the prepared strip to a wire rod with a bent end. You can bend the loop with pliers or simply twist the edge around the axis. This will further prevent the flower from slipping off the stem.

Then the lower edge of the flower is tied with threads and wrapped in green paper, like all the wire to the very bottom. Use PVA glue to attach.

Postcard in quilling technique

A voluminous postcard with carnations can be for Victory Day or for dad on February 23. Quilling strips are chosen the same width. For petals buy bright shades, and for leaves - green. If you are not yet familiar with the quilling technique, then we recall that this is a twisting of strips around a rod, the function of which can be entrusted to a toothpick or a thin wooden skewer. If you like to create crafts, then get yourself a special hook with a slot at the end.

How to make original paper carnations with your own hands? Read on for a step-by-step description of the job. Petals are made by winding freely on the rod. The edge of the strip is glued to the last turn with PVA glue. Then each detail needs to be crushed with your fingers, creating a heart shape. They are glued to the cardboard postcards in two rows. The bowl for the petals is made with a dense wrapping. After attaching the edges, you need to press the middle a little. The indented part is the part to the petals. It remains to make twigs and leaves. They are performed by winding on a thick rod. You can use a marker or a medicine bottle. After attaching the edge, the leaf is squeezed from both sides and curved in a wave.

The article gives samples of making a flower beloved by many with step-by-step instructions and photographs. Try making your own paper carnation. It is not difficult. Good luck with your work!

DIY paper carnation will be a great alternative to a bouquet of fresh flowers. This can be used not only as a gift, but also as an original decoration for a hand-made postcard, gift wrapping, or as a detail for decorating various panels.

DIY paper carnation: ideas

You can easily make such an original craft from ordinary colored paper, which you probably have at home. If you want to get a chic lush flower or even a beautiful bouquet, in this case it is better to use corrugated or papyrus paper.

As for the choice of color, there are no restrictions. You can safely choose even those colors that are unlikely to be found in nature. Experiment with different hues or make multi-colored ones that look great in a chic bouquet.

DIY paper carnation: photo instructions and a detailed description of the manufacturing process.

For such crafts, you need to prepare corrugated paper in green, orange or red shades. You will also need scissors, some glue and pieces of strong wire, which will become the basis for the stem.

First of all, you need to cut out four red squares measuring ten by ten centimeters. Fold each square in half three times (snowflakes are made in a similar way). Round the corners of the workpiece to make a circle when unfolded. Next, shape the edges of the petals by making them jagged. To separate the petals, make several cuts on the sides and one in the center. The depth of the incisions should be approximately two centimeters. After that, you can level the workpieces.

For the stem, take the wire, make a loop on top and cover it with red paper. Next, you need to string on it all the tiers of the workpiece, lubricated in the center with glue. Also prepare the sepals. To do this, cut a green strip six centimeters wide and make teeth on it three to four centimeters deep. Apply glue to the bases of the petals and glue the sepals, wrapping them around the stem once. To decorate the stem, wrap it with a thin strip of green paper or a special floral tape. Leaves can be cut to any size and glued at different heights at the same time as the stem is shaped.

DIY paper carnation: master class

Incredibly tender, beautiful and fluffy are obtained from papyrus paper.

For work, prepare: papyrus paper, scissors, a few clamps for fixing workpieces, a red or pink marker (you can use felt-tip pens or paints), a cardboard circle template, a simple pencil, a needle, a piece of colored wire (you will pierce a flower with it), green electrical tape . Instead of a cardboard circle template, you can use a compass or any other round object.

Fold a piece of paper measuring twenty by twenty-four centimeters several times so that its sides become about eight centimeters long. On the resulting workpiece, you need to draw or circle a circle with a diameter of seven centimeters, and cut it out. From one blank you will get eight circles, while you need to prepare forty-eight.

When cutting out circles, hold the paper firmly so that they all turn out even. It is more convenient to do this by securing the paper with special clips on both sides of the circle.

You can draw the circumference of the workpiece with a marker or felt-tip pen. This should be done carefully so that there are no unpainted areas left. Don't be afraid to use bright colors, on the contrary, they will make your carnation even more interesting. And do not forget to decorate the areas that are under the clips. To do this, they just need to be moved a little to the side.

When the sides of the workpiece are decorated, the clips can be removed and proceed directly to the assembly of the flower, for which you will need about eight to twelve petals. Count the required number of circles, stack them on top of each other, and then make two holes in the center with a needle. Insert the wire into one hole in such a way that it protrudes above the surface by about a centimeter and a half. After that, bend the wire, pass it through the second hole and twist both ends together from below.

When the stem is formed, you can begin to give the workpiece a magnificent shape. To do this, the circles need to be lifted up and slightly crushed with your hands. You should not crush all the blanks at once, because in this case all the tiers of your carnation will exactly repeat the shape of each other, and you will not achieve the required volume.

You also need to do the design of the stem. To do this, you can wrap it with green tape or use a special floral tape. Such do-it-yourself step-by-step mk paper carnation will help you learn how to create not only individual flowers, but also unusual multi-colored bouquets or even whole compositions.

No less beautiful do-it-yourself paper carnation (photo attached) is obtained from ordinary paper napkins.

For work you will need: bright napkins, cocktail tubes and a green ribbon.

First, tear off a strip from the napkin, the width of which is one centimeter. Next, fold the napkin in the form of an accordion and tie it in the middle with a torn strip. Further it is even easier: you need to turn the napkin over so that the knot is on the bottom, and fluff the petals of the future flower with your hands, bending them down at a right angle. Finally, attach a green cocktail tube to the workpiece. If you have a tube of some other shade, this is easy to fix. You just need to tightly tie it with a green ribbon or braid. For this purpose, you can also use a napkin of a suitable color, which, for reliability, does not hurt to stick to the tube. As you can see, everything is done very simply and quickly, so it is quite possible to involve children in the work.

If you like our site, express your "thank you"
by clicking the buttons below.

The carnation itself is a very good and beautiful craft, but a few of these paper carnations can replace a whole bouquet of fresh flowers. Such a bouquet can be used as a gift, as well as decoration for home interior. And so, the “heroine” of our master class will be a carnation made of paper, which is easy to make with your own hands.

Perhaps someone will think that such a carnation is quite difficult to make. But this is a very big misconception, since the origami technique, for the most part, does not cause any difficulties in execution. Believe me, any inexperienced person who does not have much experience in origami can handle such a carnation.

We collect carnations from paper step by step with our own hands in a master class

The final shape and size of the flower will depend on what material you choose. If you want to make the carnation shown in the photo above at the beginning of the article, then you will need ordinary colored paper, which can be found in almost every home. But if you still don’t have it, then you can easily buy it at any school store.

In order to get the most magnificent flower, one should give preference to corrugated or papyrus paper, which has the properties we need.

Having decided on the type of paper, many will ask themselves the question: “What color paper to choose”? No one can give you a definite answer to this question. If you like something new, then choose a wide variety of colors. That is, your carnation can be both blue and purple. Your imagination has no limits! But if your brain is a "follower" of realism, then choose orange as it looks the most natural.

The master class will tell you in detail how to make a carnation quickly and step by step with your own hands.

First, prepare the paper of your chosen color. We will definitely need scissors and some glue and pieces of wire that will act as stems.

We start by cutting out four red squares. The length of each side is ten centimeters, if you want to get a larger color, then take twenty, but sheets of plain paper will not allow you to cut out such squares. Fold each square in half three times and round the corners of the resulting blanks. We do it with the expectation that in expanded form we have a circle.

We make cuts, trying to get more beautiful leaves. To separate the petals, we make several small cuts on the sides of the workpiece and one cut in the center. Each of the cuts should be about two centimeters deep.

We make the stem in the following way. First, take the wire and make a small loop on top. Paste the resulting loop with red paper to hide its metallic color. We carefully glue the entire piece of the tube with green paper and try to get the best result: without gaps that will show that the stem consists of wire.

We make several leaves of arbitrary shape. The more they are not similar to each other, the more natural our flower will turn out. They can have absolutely any shape, the main thing is to monitor their size. Petals should not be too large and sharply conspicuous!

After we have prepared all the parts, it is necessary to glue them. We start by gluing the flower itself to the stem, trying to do everything as carefully as possible so that no traces of dried glue can be seen. Now we glue the leaves. They should not be very close to the flower, but at the same time, if the petals are lowered too low on the stem, it will turn out quite ugly. So a sense of proportion in this step will be the best helper. We try to evenly distribute the blanks of the petals over the surface of the stem.

That's all! Our beautiful carnation is ready. By making a few more of the same, you can get a very beautiful bouquet, do not try to make them exactly the same, let each of them be slightly different from the other. Indeed, in wildlife it is impossible to find two identical flowers, but only those that are quite similar to each other.

For the resulting bouquet, you can find an interesting vase. Or make it yourself from the same colored paper. Such a bouquet, made entirely by your own hands, can decorate the interior very well and breathe something new and special into it. The vase can be made into a cylindrical shape with a beveled top and bent edges. Such a vase will look quite interesting, because it looks like a collar.

These videos will show you very interesting origami crafts. Yes, and they will tell a lot of new things from this beautiful art form.

Made in different techniques, do-it-yourself paper carnations allow you to decorate greeting cards, brooches, or just make a beautiful bouquet. They decorate gift wrappings, panels. Volumetric flowers are used to decorate the hall during festive events. And the carnation is considered a symbol of May 9th. She is often depicted with a St. George ribbon.

In this article, we have collected for you the most popular, simple and effective ways to create paper carnations.

Easy options for making corrugated paper carnations

To make paper carnations with your own hands, in any case, you must have red and green paper. Although for making flowers, you can use white, yellow, pink paper. It is necessary to arm yourself with scissors, PVA glue (adhesive stick) and wire.

There are several simple options for how to make a carnation out of paper.

Method number 1

For one of these simple methods, you need to cut a strip of paper 5 centimeters wide into the length of the sides of a standard sheet. Make cuts of 3-4 cm at a distance of 5 mm along the entire length. Then such a strip is wound on a wire (each layer must be glued).

The stem is wrapped in green paper. Leaves are glued on it, which can be glued. So they will be denser and better hold.

Method number 2

Corrugated paper is considered the best choice when making flowers that have wavy edges. Using it, you can make a carnation. To do this, you need to take a strip 0.5 m long and 8-9 cm wide. Then we wrap the edge three centimeters inward along the entire length. Gently stretch the fold line so that they acquire a wavy shape.

We cut the bottom with scissors so that it resembles the base of a bud of a living flower.

It remains to wrap the base and stem with teip tape or a strip of green paper, and our carnation is ready!

You can see a step-by-step master class in the photo below.

Method number 3

Another very simple version of the carnation, which even a child can handle.

1. Cut out several identical squares from corrugated or crepe paper.

2. Fold each square and cut out a circle from it.

3. We make cuts, as in the photo.

4. We wind a small strip of red paper on a wooden stick - this will be the middle of the carnation. We fix it with green floral tape.

6. When the whole flower is formed, wrap the stem with teip tape and glue the leaves.

Master class of a three-dimensional flower made of colored paper

In this tutorial, we will learn how to make a paper carnation using a template. For this, the necessary details are cut out (2 each for large, medium and small petals, 2 leaves and a stem). They are cut along the template lines and bent slightly, and then glued one by one. The stem blank should be rolled into a tube and glued. The leaves are attached to the stem.

Tip: When gluing the stem, you can use a pencil or brush to make it thinner.

Thus, following the technique of making carnations using paper, you can create a good craft, for example, by May 9th.

Application "Carnation" for children

The technique of making paper carnations for children involves the performance of work based on applications. Petals, green leaves and a flower cup are made separately.

The step-by-step instruction looks like this: the circles are stacked, folded in half. Cuts are made on them so that the flower turns out to be terry. Glue the bud to the base and add the details of the stem and leaves.

You can make several flowers to get a bright bouquet.

Carnation in the technique of origami - an interesting option for crafts

In this detailed video master class, you will learn an interesting way to make a carnation with your own hands using the origami technique.

Do-it-yourself postcard for May 9

The carnation is a symbol of Victory Day, so it would be a good idea to make such a beautiful greeting card with the children with a lush bouquet of carnations and a St. George ribbon, as in the video master class below.

You can master the technique of creating not only individual flowers, but also unusual variety of bouquets and compositions. It is not difficult to make such crafts. Children who quickly master this technique can help in the work. If you collect a bouquet of carnations, you will get a wonderful gift that can be placed in a basket, supplemented with sweets.

You can leave your impressions, ideas and questions in the comments below the article. Let's connect and create together!

The carnation is considered a symbol of courage and victory. It is this flower that most often adorns boutonnieres from St. George's ribbons for Victory Day. But, unfortunately, the cut branch of the carnation quickly loses its original appearance. A paper carnation is a great alternative to a cut flower. Today we bring to your attention the simplest and most understandable technique for creating carnations.

For work, we need to prepare several materials and tools:

red colored paper (required double-sided);
a roll of green corrugated paper;
a piece of wire 15-20 cm long;
scissors;
pencil;
glue of any kind.

How to make a carnation out of colored paper

Step 1. So, first we will create blanks for carnation petals. To do this, we need a sheet of red double-sided A4 paper. In the corner of the leaf, draw a circle with a diameter of 6-8 cm.

To create a figure, you can use a compass or draw by hand.

Step 2. Cut out a square with a circle inside from red paper. Next, create 7-8 blanks with the same parameters.

Step 3. Now we put all the mini-leaves together, and on top we apply a blank with a circle outline.

Step 4. We begin to carefully cut out the petals, creating miniature teeth along the contour.

In such a simple way, we created the required number of blanks.

Step 5. We outline the main cut lines on each circle, folding them several times.

Step 6. We cut the details along the formed lines.

Next, between the lines we create three cuts.

Step 7. For maximum realism of the flower, we give the correct shape to each petal. We twist almost all the blanks with scissors inward.

We need to give a few details such a shape, bending each petal in half.

Step 8. We will use a piece of wire as the basis for the carnation stalk. We bend its end into a loop.

Step 9. We begin to string the blanks. First we fix the blanks with petals bent in half. We move the first part to the loop, apply adhesives to it and squeeze the petals well.