Online store for rubber shoes “special-gost. Safety footwear standards Women's winter safety footwear

Work shoes are designed to protect feet from unfavorable production and climatic factors (mechanical damage, moisture, low temperatures, etc.). Technical requirements for products are established by GOST 12.4.127-83.

The RONTA online store offers to buy work shoes in Moscow. The catalog contains:

• sandals,
• low shoes,
• boots,
• slippers,
• shoes,
• clogs,
• boots, etc.

Elements of safety shoes

Specialists from the online safety footwear store in Moscow “RONTA” draw your attention to the elements that make up safety footwear:

• Suzka (main detail). The front of the shoe, the transition from the foot to the shin. It is made from particularly durable materials, since it constantly experiences deformation;
• Hard toe cap. A part located in the toe part of the product between the top and the lining. Provides protection for toes from impacts;
• Berts. The side parts of shoes, on the surface of which lacing and fasteners are attached. They are subject to high loads, so they are made of durable materials;
• Lining (wrong part). Should not interfere with air exchange. Made from natural or artificial fur (less commonly, soft thin leather);
• Hard back. Gives shape to the back of the product. Provides comfortable and reliable fixation of the foot position, protects it from mechanical damage;
• Sole. Made from injection-molded thermoplastic polyurethane, resistant to high and low temperatures (from - 50°C to + 350°C);
• Main and insole. Provide comfortable conditions for the position of the foot, promoting uniform distribution of the load;
• Boot top. Protects part or almost the entire shin (depending on specialization), protects it from negative industrial impacts.

What materials are work shoes made from?

Natural materials are used to produce modern work shoes. They provide the maximum level of worker protection from extreme temperatures and moisture while maintaining foot comfort.

Work sandals, low shoes, boots are made of genuine leather. Our catalog of safety shoes includes models made from yuft (genuine cattle leather) and tarpaulin (an artificial material based on thick cotton that replaces leather).

Requirements for safety shoes

Working safety shoes guarantee 100% protection of the worker’s feet when carrying out production activities, provided that they:

• Made of material resistant to climatic factors, moisture, hazardous chemicals;
• Complies with service life standards, Russian and European quality and reliability requirements;
• Convenient and comfortable to wear, securely fixes the position of the foot and does not interfere with air circulation.

The specialized online store “RONTA” offers to buy work safety shoes in Moscow that meet the listed requirements. Beneficial cooperation with each client - a guarantee of high quality, affordable prices and fast delivery throughout Russia.

Special shoes abbreviated safety shoes Designed to protect feet from hazardous influences.

By purpose work shoes can be divided into industrial and uniform,
although both provide protection from general industrial pollution and climatic factors.

Uniform shoes emphasizes belonging to a particular profession to a greater extent.

Industrial shoes depending on the working conditions and aggressive environment, it may have, in addition to protection from general industrial pollution, OPP - both MBS and KSH, and a number of other protective properties.

Work shoes protects and protects our feet from a number of unfavorable factors: thermal influences, the negative influence of aggressive environments, cuts and punctures, ingress of foreign objects.
If necessary, shoes can be equipped with a puncture-resistant insole (metal or light Kevlar) and a durable impact protection under the toe (modern composite or metal).
As in the clear example of safety shoes Eckel (France) and Panda (Italy) without compromising the appearance.

Imported work shoes

As a rule, it provides these options as standard in accordance with the requirements for organization and labor safety adopted in Europe.

Step by step to comfortable shoes!

Reliable and comfortable protection - for those
who chooses a job without risk.

Ideal shoes for work and more.

Superior materials, attractive design.

Impeccable protective properties.

Excellent price-quality ratio.

European safety standards

High technology and social responsibility.

Work shoes for professional use

Standard EN ISO 20347 Such shoes differ from safety shoes in that they do not have a reinforced toe box and do not provide protection from falling objects and mechanical impacts, while having the following properties: anti-slip, oil- and petrol-resistant sole, shock absorption in the heel area, antistatic properties, and moisture-resistant shoe top.

Safety shoes for professional use

Standard EN ISO 20345 Shoes must be protected from falling objects and damage that may occur in an industrial area. Equipped with a reinforced toe box, these shoes provide protection against mechanical impacts of up to 200 J.

Demi-season, winter and summer - generally accepted division according to the season of wear or in accordance with the conditions of its operation according to the time of year.

Based on materials used for manufacturing, safety footwear is classified into three main groups:

Leather footwear made from natural leather materials and its substitutes, including those with a textile upper;

Shoes made of rubber and made of PVC (polyvinyl chloride) plastic;

Felted and felt shoes.

According to the design of the top and its height are determined by the following main types: boots, boots, low shoes and shoes. Varieties of which are: high boots, ankle boots, boots, sandals, dudes and other shoes used for work.

Production of safety footwear

Modern production of work shoes has made significant progress today. Nail, glue and welt-stitching methods are becoming a thing of the past, becoming obsolete, and shoes using the injection molding method for attaching the sole are increasingly gaining their fans. There is nothing unusual in this, it’s just that over time we find more practical solutions, including for the production of safety footwear.

The production of higher quality and practical products requires shoemakers to use modern machines and equipment: injection molding units, presses, where almost all processes are automated and controlled by electronic control systems. Even the uppers of shoes, which are least subject to significant changes, are sewn today using semi-automatic lines.

Let us also pay tribute to Russian enterprises, Yachting (Cheboksary), Artak (Kostroma), Vostok-Service (Torzhok), whose products are deservedly popular and have won the trust of the Russian consumer. By the way, the technological equipment of these enterprises today is in no way inferior to their European counterparts, and production facilities allow them to flexibly respond to seasonal demand, fulfill corporate orders with changes to the basic models, taking into account the specific features and wishes of customers.

In our assortment presented practically all safety shoes , which may be required to perform work in various conditions, both climatic and special, and where necessary special protection .

Comfortable work shoes from the best domestic and imported manufacturers for you in our catalog. Modern methods of fixing soles, high-quality materials, a large selection of practical and stylish models made in Europe set our offer apart from other suppliers.

The online store of safety shoes makes your choice even more profitable: delivery without overpayment at fair and affordable prices, because the operating costs of our company are much lower than those of competitors.

The technical regulations were developed in accordance with the Agreement on uniform principles and rules of technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation dated November 18, 2010 with the aim of establishing, in the single customs territory of the Customs Union, uniform, mandatory requirements for the application and execution of personal protective equipment, ensuring the free movement of personal protective equipment released into circulation in the single customs territory of the Customs Union.

TR CU 017/2011 Technical Regulations of the Customs Union “On the safety of light industry products”

The technical regulations were developed in accordance with the Agreement on uniform principles and rules of technical regulation in the Republic of Belarus, the Republic of Kazakhstan and the Russian Federation dated November 18, 2010 with the aim of establishing uniform, mandatory requirements for the application and implementation of light industry products, ensuring the free movement of light industry products issued for circulation in the single customs territory of the Customs Union.

GOST 12.4.137-2001 “Special footwear with leather uppers for protection against oil, petroleum products, acids, alkalis, non-toxic and explosive dust. Technical specifications"

Technogard®, Neogard®, Neogard-Light®, “Delta”, “Standard”, “Nitrile” and other injection-molded footwear.

Footwear provides protection for workers from oil (symbol - Hc), petroleum oils and petroleum products (symbol - Nm), non-toxic dust (symbol - Pn), acids and alkalis with a concentration of up to 20% (symbol - K20, Shch20).

GOST 28507-99 “Special footwear with leather uppers for protection against mechanical influences. General technical conditions"

This standard corresponds to footwear of the "", Technogard®, Neogard®, Neogard-Light®, "Delta" series and other footwear with metal and composite protective toes.

To protect against impacts in the toe area, shoes are made with internal metal or composite protective toe caps with an impact strength of 200 J (symbol - MUN 200).
To protect against punctures and cuts, shoes are made with a puncture-proof insole (metal or Kevlar) with a through puncture resistance of at least 1200 N (symbol - MP). Additional equipment.
Warranty period for wearing shoes: 70 days from the date of issue, subject to the conditions of operation, transportation and storage.

GOST 12.4.032-95 “Special footwear with leather uppers for protection from high temperatures. Technical specifications"

Shoes provide protection for working feet from thermal radiation (symbol - Ti), contact with heated surfaces above 45 °C (symbol - Tp), sparks and splashes of molten metal, scale (symbol - Tr).
Warranty period for wearing shoes: 70 days from the date of receipt of the goods by the consumer, subject to the conditions of operation, transportation and storage.

GOST 12.4.033-77 “Special leather footwear for protection against slipping on greasy surfaces. Technical specifications"

Neogard-Light® footwear complies with this standard.

GOST 26167-2005 “Casual footwear. General technical conditions"

This standard corresponds to shoes using glue-bead-stitching and adhesive fastening methods.

Warranty period for wearing leather shoes: at least 30 days from the date of sale through a retail chain, taking into account seasonality, subject to operating, transportation and storage conditions.

GOST 5375-79 “Mold rubber boots”

This standard corresponds to rubber boots for women and men, and fishing boots with impact-protective elements.

The boots provide protection from water, and in the special version GOST 12.4.072 - from petroleum oils, acids and alkalis with a concentration of up to 20%.
Warranty period for wearing rubber shoes: 90 days from the date of receipt by the consumer, subject to all conditions of operation, transportation and storage, shelf life - no more than 12 months, and for the Far North and remote areas - 18 months from the date of manufacture.

Shoes made of polyvinyl chloride are manufactured according to specifications and provide protection from water.

Warranty period for wearing shoes made of polyvinyl chloride: 90 days from the date of receipt by the consumer, subject to all operating, transportation and storage conditions, shelf life - no more than 12 months from the date of manufacture.

GOST R 12.4.187-97 “System of occupational safety standards. Special leather shoes for protection against general industrial pollution. General technical conditions"

This standard corresponds to footwear of the "", Technogard®, Neogard®, Neogard-Light®, "Delta" series (symbol - Z).

Standard EN ISO 20345

The standard defines the basic and additional requirements for safety shoes with category S marking. Protective toe cap with impact resistance of 200 J.

Marking of the category of protective properties	Protective properties EN ISO 20345 (EN 345-1)
S.B.	Basic basic requirements for shoes and protective toe caps (MUN 200)
S1	SB + closed back + A + FO + E
S1P	SB + closed back + A + FO + E + P
S2	SB + closed back + A + FO + E + WRU
S3	SB + closed back + A + FO + E + WRU + P

Symbol marking	Description of protective properties
A	Antistatic footwear
E	Impact energy absorption in the heel area
F.O.	Oil and petrol resistant sole
P	Penetration resistance and puncture resistance of the bottom of the shoe
HRO	Resistance of the sole to elevated temperatures (+300°C/min)
C.I.	Resistance to low temperatures
HI	Resistance to elevated temperatures
WR	Water resistance of all shoes
W.R.U.	Water resistance of the shoe upper
M	Metatarsus protection
CR	Top cut protection
SRC	Anti-slip

Summer work shoes in our catalog are divided into open work shoes according to the type of sandal, and also, depending on the height of the top, into boots and low shoes.

Summer men's safety shoes

Work shoes for men are typically produced in sizes 38 to 47. However, some models are presented in sizes for real giants - up to size 52.

The lightest indoor safety shoes include safety sandals and lightweight work shoes with mesh lining.

Summer models in our catalog of safety shoes are made primarily from high-quality leather. However, there are models made of nubuck, as well as demi-season models with a breathable waterproof Gore-Tex membrane

Summer women's safety shoes

Work shoes for women are one of the many strengths of our company. The number of models for the fair half totals more than 15 units, and this does not take into account white shoes and clogs for food production. Models for the fair sex are produced in sizes from 35 to 41 and will fit even the smallest feet.

Part of the range of women's work shoes is represented by classic models, duplicating the design of similar men's models. Some shoe models are made using blue and pink thread; even the most desperate fashionistas can safely buy such special shoes.

High-quality and warm work shoes are an essential attribute for fruitful and safe work in winter. In our catalog of winter safety shoes you can find both models with natural fur and modern artificial insulation, the leader of which is the American Thinsalute.

Winter men's safety shoes

We mainly supply winter shoes for men from sizes 38 to 47, but by contacting us you can also buy super large sizes 50-25, which are also available for some models.

The range of winter men's work shoes from our company is very wide. Manufacturer brands are leaders in their niches, so we can offer the following wide range of models:

• Safety shoes made of natural fur and Thinsulate insulation
• Winter work boots, boots, high boots and winter safety boots
• Heated work boots for extreme cold
• Work boots with retractable anti-slip cleats for working on as many icy surfaces as possible
• Anti-slip attachments of various types, which are insurance against falling on ice
• Sturdy boots with a triple liner made of Thinsulate for working in extreme cold at minus 40-minus 50 degrees

Women's winter safety shoes

Women will also find our range of work shoes very interesting. Several models are produced starting from size 35, so we have the opportunity to choose warm winter models for the smallest feet.

Women's work shoes- boots specially designed for women working in high-risk environments. The anti-puncture insole and metal toe cap will make work enjoyable and safe. Stylish design will not leave any woman indifferent!

Ice drifts/Ice accesses

Anti-slip pads (ice pads) are an excellent solution for providing traction to the surface in winter. Anti-slip pads for shoes are an excellent gadget for increasing safety for work and outdoor activities in icy conditions. Our assortment includes ice access from the following brands: Portwest, Devisys, Icetrekker.

Professional medical shoes Oxypas

Oxypas is a leader in the development and production of work shoes for medical personnel. The Oksipas company produces a wide range of models for specialists in the medical, laboratory and pharmaceutical industries.

More than 20 years French manufacturer produces high-quality and comfortable shoes for 5 working segments:

• Pharmaceutical production
• Cleaning service workers
• Medical workers
• For production
• For electronics

Oksipas - comfort throughout the working day

To produce the entire line of products, Oksipas uses only high-quality materials. Most of the available range is made of thermoplastic elastomer, which is famous for its increased ductility and flexibility, due to which it can withstand significant loads. Oxypas professional footwear guarantees comfort even for those who spend all day on their feet.

Oxypas - Professional style at an affordable price

A wide selection of quality footwear includes original models of shoes, low shoes, sneakers and clogs. The collection is distinguished not only by a variety of stylish solutions, but also by color options. In addition to the classic white safety shoes for the medical industry, there are also models in green, black, pink and other colors. Such variety will allow you to choose and buy shoes based on personal preferences or in accordance with corporate colors.

Thermal socks from the Polish brand COMODO are suitable for intensive work at any time of the year. For the manufacture of products, only natural wool is used, mainly from Merino sheep.

Features of COMODO thermal socks

Thanks to the use of modern technologies, socks maintain optimal temperature, actively allow air to pass through and remove steam, and also prevent the growth of bacteria. The thoughtful cut of the products does not rub the feet and provides maximum wearing comfort. The manufacturer's product lines include many models, from insulated socks to lightweight options.

Features of merino wool

1. Wool has high thermal insulation. In winter, socks reliably retain heat, and in summer they effectively protect from heat.
2. Products made from merino wool are characterized by good hygroscopicity. Socks absorb moisture and keep the skin dry even as the load increases.
3. Thermal socks do not absorb odors, which is important for this type of clothing. Merino yarn repels odors, so items stay clean longer.
4. Merino wool is stain resistant. The structure of the fibers consists of curls-springs that push out dirt, preventing it from penetrating inside.
5. Strong antibacterial properties. Merino wool contains creatine, which prevents microorganisms and bacteria from multiplying.

Vladimir Parshin

Expert in the selection of safety footwear

Work in production is often associated with negative external influences, so workers need appropriate protection. Special footwear plays an important role in ensuring safety. It protects feet from industrial pollution and dampness, bruises and punctures. In addition to the protective properties, safety shoes value quality such as comfort. Properly made shoes ensure a stable foot position on the surface, while reducing fatigue. This quality is especially important for workers who have to spend their entire shift on their feet.

Classification of safety shoes by protective functions

The concept " safety safety shoes"includes dozens of types of shoes with various protective functions, according to which they are divided into groups.

The most common group is safety shoes that protect from mechanical influences. Mechanical impacts include punctures, cuts, abrasion, falling of heavy objects, compression by large loads, and vibration. As a rule, these are boots, low shoes or boots made of artificial or natural leather, with durable soles made of molded rubber or polymer. Metal or plastic toe caps with a maximum impact load of 200 J are used as protective elements. In addition, such shoes are reinforced in the ankle and heel areas. An anti-puncture insole is used to protect against punctures.

The second group includes shoes with protection from slipping. In the manufacture of such safety shoes, special attention is paid to the sole. To ensure strong adhesion to icy, oily, wet or dirty surfaces, frost-resistant, oil- and petrol-resistant materials are used. The outer part of the sole is equipped with deep treads and sometimes with special studs. It is equally important to ensure a stable foot position in such shoes due to strong lacing and a tight fit of soft ankle boots or tops.

Example. from ENERGY LLC have high boots and a thick, corrugated, bead-stitched rubber sole. Due to the physical and chemical characteristics of rubber and deep treads, the sole does not slip on icy and oily surfaces and provides reliable stability.

An equally large group is safety footwear with protection. from elevated temperatures. This includes boots (low boots) and shoes (low shoes) for metallurgists, welders, firefighters and other professions associated with thermal radiation and extreme heating of surfaces. Heat-resistant materials are used to make such shoes.

Example. from ENERGY LLC are made of durable genuine leather and equipped with an additional valve that prevents hot metal splashes and sparks from getting inside. The molded sole made of monolithic thermopolyurethane retains its shape and integrity even when in contact with a hot surface. The shoes are designed for work in “hot” shops.

Working in severe frost is impossible without special shoes designed to protect from low temperatures. This group includes boots and boots made of natural or artificial leather with insulation inside. The sole is made of frost-resistant materials.

Example. from ENERGY LLC are made of natural fatty leather of increased thickness, which provides good heat protection. The sole is made of frost-resistant rubber and is equipped with anti-slip spikes. These safety shoes are designed to work at air temperatures down to -45°C.

Special group - safety shoes with protection from X-ray and radioactive radiation. This includes boots, boots, shoes, galoshes, and slippers made from deactivating materials that do not contain certain types of chemical elements. Depending on the degree and specificity of protection, such shoes are divided into classes. This group also includes disposable shoes - special shoe covers.

Working with electrical installations requires protection fromelectric current, electrostatic charges and fields, electric and electromagnetic fields. Safety shoes of this group are made of dielectric materials, for example, have rubber soles. A prerequisite is the absence of metal objects on the shoes (fittings, protective toe caps, steel nails). Such shoes are called antistatic because they provide electrostatic grounding when exposed to an electric field.

Safety shoes designed for protection from high humidity, are boots, overshoes or galoshes made of molded rubber or polyvinyl chloride. It protects your feet not only from getting wet in water, but also from contamination with non-toxic substances. Protection from toxic substances, acids and alkalis provides special shoes with durable soles with high resistance to aggressive environments. As a rule, this is a sole made of rubber, polyurethane or thermopolyurethane. A similar sole is used to make shoes for protection against oil, petroleum products, fats and oils. Often one type of safety footwear combines these three types of protective functions at the same time.

Example. from ENERGY LLC are made in one-piece molding from waterproof PVC. Designed for use in the food, construction and chemical industries, as they provide protection from the aggressive effects of acids, alkalis, petroleum, petroleum products, oils and fats. Also suitable for fishing and hunting.

Another fairly large group combines many types of shoes with protection. from general industrial pollution(dust, dirt). This includes boots, boots, low shoes, shoes, sneakers.

Example. from ENERGY LLC are made of genuine leather (split leather). The PVC sole is attached by injection molding. Durable lacing prevents small debris and dust from getting inside. This model provides protection for feet from general industrial pollution.

Shoes, which are personal protective equipment, have a rather specific protective function. from biological factors. This group includes shoes and boots that protect against tick bites and harmful microorganisms. They are used by people who are forced to spend most of their working time in the forest, in wetlands, etc.

Signal shoes constitutes a group of safety footwear equipped with reflective elements and details made from background materials. It is necessary to ensure safe operation in conditions of twilight, fog or poor lighting.

Comprehensive protection. Most safety footwear models are equipped with several protective functions, which allows them to be used in various fields of activity.

Example. from ENERGY LLC are equipped with anti-puncture Kevlar insoles, a composite toe cap and a heel made of durable thermopolyurethane. The nitrile rubber outsole can withstand both extremely high and low temperatures. There are no metal elements in the shoes, and the laces are made of heat-resistant material. It is certified as an arc resistant shoe. In addition, the boots are equipped with reflective elements.