How to make a hippopotamus from paper flowers. Modeling lessons: how to make a hippopotamus from plasticine

It is not necessary to use only bright colors of plasticine for sculpting crafts; all kinds of products are also made from the gray mass, for example, animal figurines. Gray plasticine will make a wonderful hippopotamus, which will be very similar to a real representative of the fauna. If you and your child are creating a collection of plasticine animals, focusing on the lessons given in the corresponding multifaceted section on our website, then you will be interested in making a hippopotamus from plasticine. Get down to business quickly.

1. In your work, you can get by with one color of plasticine – gray. Small drops of white will only be needed to highlight the eyes. A plastic stack is also indispensable when working with soft masses.

2. Starting to sculpt the head, roll two balls of different sizes and flatten them with your palms.

3. Connect the resulting cakes together and carefully smooth out the transition between the front and nose parts.

4. Using a match, pierce the nostrils and the places where the eyes are located, insert the eyes into their places. Attach miniature ears to the top of your head. This is the stern face of the hippopotamus.

5. To sculpt a thick animal body, knead the same plasticine in your hands. Roll out a large oval, and make the neck place in the form of several folds.

6. Pierce the pleat area with a match in the middle and place the head on it.

7. The remaining small details: four thick paws and a small tail. The remains of gray plasticine will be used to make them.

8. Attach the legs and tail to the body. Half matches can also help with this.

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

Our swamp dweller is ready. This is how you can while away a long winter evening by doing exciting creative work with your child. Be sure to try making other animals that are presented on the site to get a whole zoo.

From disposable tableware you can make comical and not-so-comical creatures, birds, waterfowl and reptiles, and animals. Today it is a plastic plate behemoth. Although it should be noted that plastic works much worse than paper. Therefore, if it is possible to replace a plastic plate with a paper one, this is a big plus. Plastic cannot be painted with ordinary paints; acrylic ones are needed; it does not interact well with office glue, which children most often work with.

Materials for work:

Our hippopotamus will be unexpectedly yellow :) so the list of materials is based on this fact.

• Yellow disposable plate. If you have acrylic paints or a paper plate, you can paint it yellow;
• Yellow cardboard;
• White and black paper;
• Black felt-tip pen, scissors, pencil.
• Glue stick if the plate is paper. Glue point or glue gun for a plastic plate.

If desired, a composter with some figures to decorate the bow. But you can do without it, cut out simple circles, since polka dot print is also in fashion :)

How to make a hippopotamus from a plastic plate?

First you need to cut out the muzzle - a rectangle with rounded corners. Its length should be slightly wider than the plate, and its height should be slightly more than half of it.

Then make the eyes. They must be large enough. Draw and cut out two ovals from white paper, almost half the inside of the plate, two yellow crescents repeating one of the parts of the oval and two black circles - the pupils.

Glue the parts of the eyes together and draw eyelashes.

Cut out a wide but narrow mouth from black paper, and several teeth from white paper. Glue everything together. Cut out the ears.

Make the simplest bow.

Well, then glue all the parts to the inverted plate. First the eyes, immediately below them a muzzle with a smile, then ears and a bow, previously decorated with some patterns. The muzzle with eyes was quite successfully glued to the plastic plate using a glue stick. But the ears and the bow had to be glued with instant glue, since they did not stick very well on such folds. If you have a paper plate, I think there shouldn’t be such problems.

The plastic plate hippopotamus is ready, don’t forget to draw nostrils and flirty eyelashes, because your character with a bow is clearly a mademoiselle, playful and flirtatious :)

Print Thanks, great lesson +2

A beautiful toy for a child can be made of paper. Of course, it is not durable, but the child can make it himself or together with his parent. And this is very useful for children's fingers! To make it easier to create a craft toy in the shape of a hippopotamus, we present you with a ready-made template that you can download and print. According to the template, everything is very clearly indicated where to bend and where to cut. However, it is better to use this lesson so that the hippopotamus turns out beautiful and neat the first time.

Required materials:

Step-by-step photo lesson:

Print the template onto thick white paper. Now you can take scissors and cut out all the parts for the craft along the marked lines. There should be four parts in total - a body in the form of a cube, a head, a tail and an auxiliary part to create the volume of the head.

We take the largest piece and bend it along all the proposed lines.

We apply glue to the white areas and apply them to the necessary places to make the body of a hippopotamus in the form of a cube.

Bend the tail along the line and apply glue. Glue the tail to the back of the body.

From an element in the form of a strip, we create a blank with which you can make the hippopotamus’s head more voluminous. First, we bend the paper blank along the lines and then glue it together.

Apply glue to the white area and attach the part to the back of the head.

We glue the head of the hippopotamus to the body, namely, to one of the sides of the cube.

At this point, the cute paper hippopotamus according to the template is ready and can be used as a toy for a child.

Our previous lesson was devoted to. The beast turned out to be similar, and even the figure itself turned out to be strong and stable. In general, I was sorry to break it. But storing such products is also useless - they, alas, are disposable. Okay, then at least I’ll turn the lucky rhinoceros into a hippopotamus.

Not so! The result was a distinct rhinoceros. So I overcame my laziness, kneaded the plasticine and - a new incarnation - we sculpt a hippopotamus from scratch.

I was guided by a picture from the Internet. Well, of course, I had to sculpt it carefully, but still, a little plasticine got on the keys.

So, we take a powerful block of plasticine, roll it into a cylinder, or more precisely, into a sausage, and designate the legs. The legs of a hippopotamus cannot be compared with the legs of a rhinoceros. Small and somehow frivolous. As I understand it, hippos are unlikely to be able to run long and fast. But swimming with the help of such paws is a cute thing.

But the head matches the giant body - huge, rectangular.

The mouth is like a suitcase - that is, the upper jaw is like a lid, and the lower jaw is huge and is this suitcase itself. But I will refrain from sculpting an open mouth and will simply use a stack to outline the line of the mouth. The eyes, nostrils and ears are convex; they protrude above the surface when the hippopotamus sits in water (up to its ears), as, for example, crocodiles do.

In general, this African animal, although it looks a little like a rhinoceros, is no longer like it. The hippopotamus has its own charm.

19 May 2015

Many people believe that the hippopotamus made of plasticine- This is a rather complex craft that children will not be able to master. In fact, you can sculpt this exotic animal in six stages. How to do this is described in this article.

Materials required for work:

• gray plasticine;
• modeling board;
• plastic stack;
• matches.

Modeling lesson plasticine hippopotamus.
It is impossible to work with hard plasticine, so first you should knead the mass well in your hands. If there is no gray block in the set, mix white and black until smooth. Roll two balls of different sizes.

Fasten both balls by placing a match between them for security. Pull the smaller ball forward slightly, forming the nose part.

Place eyes on your face and frame them with eyebrows.

Cut a semicircle with a stack, forming a hippopotamus smile, and pierce the nostrils with matches. We have a very kind animal that smiles at its creator and everyone around him.

The basis for creating the appearance of an African animal is ready. Now all that remains is to add a few small details. Place small ears on your head and attach a tail at the back.

Make four legs from gray plasticine and attach to the body, using match halves for security.

That's it, ready.

This craft looks expressive, despite the fact that it is made of nondescript gray plasticine.

Cute hippo made of plasticine.

Thanks to our plasticine modeling lessons your child will be able to occupy himself with an interesting activity. You can play with plasticine figures, and most importantly, modeling develops finger motor skills. You can create a whole collection of plasticine animals. Small horses – ponies – are especially popular among children. How to blind plasticine pony our next master class will show.

Especially for the site Handicraft Lessons Natali.