home › Fashion and beauty › Is it possible to dye boots made of genuine leather. How to dye suede shoes: easy ways

Is it possible to dye boots made of genuine leather. How to dye suede shoes: easy ways

There are literally sneakers in every wardrobe - for schoolchildren, for athletes, and even for glamorous fashionistas. But fabric shoes get dirty easily, so the question of how to paint, paint, paint, decorate rag and rag sneakers is relevant for many.

Fashion and comfort

As soon as it gets warmer outside in spring, we take our favorite moccasins, sneakers or slip-ons out of the boxes. Many years ago, this type of shoe was intended only for sports and looked dull and monotonous. Now it is an integral element of a fashionable “bow”, which has a lot of colors: from plain white to golden with spikes.

This type of comfortable footwear has not gone out of fashion for many years. But no matter how good our favorite sneakers are for us, they are not eternal. The fabric can tear, get dirty, fade when washed or fade in the sun. And sometimes we just get tired of the old colors. Do not throw away such comfortable shoes. There are a lot of ideas on how to transform and decorate it, make it original and even designer. This will require your imagination, a little time and some decorative elements. The transformed sneakers will definitely cost less than the new Converses.

Primary processing

No matter how you come up with an “upgrade” of your shoes, in any case, you first need to freshen them up. First of all, take out the laces and wash them. After that, take care of bleaching the soles and direct washing of the shoes.

sole whitening

Be sure to whiten the sole, namely its lateral part and the nose of the sneaker. For this:

Mix baking soda with vinegar to make a paste.
Rub the rubber parts with the prepared mixture using an old toothbrush.
Rub thoroughly and leave for 25-30 minutes.
Rinse off the dirt mixture carefully with water.

After this procedure, the sole will be like new.

Washing sneakers

Put the sneakers before washing in a special bag for washing shoes or just in an old pillowcase.
Select the delicate mode in the washing machine. The water temperature should not exceed 40 degrees.

Important! With other washing modes, you can ruin either sneakers or a washing machine.

Deactivate the spin function.
After washing, let the shoes dry naturally.
To keep it in shape, you can put crumpled newspapers inside.

After your shoes have dried, feel free to experiment with their design. Just first think about what you would like to see as a result, and prepare the necessary materials. And our article will help you with ideas and ways to implement them.

How to dye fabric sneakers?

If your sneakers, slip-ons or moccasins were originally white and have lost their purity of color over time or are simply tired, then they need coloring and you can easily transform them. This can be done by specialists in shoe shops or by yourself.

Tools and materials

If you decide to take matters into your own hands, then look through your wardrobe and decide on the color scheme. After that, visit a specialty store and purchase fabric dye, one or more colors. These can be powder paints that need to be dissolved in water, or acrylic.

To paint shoes you will need the following items:

a container for painting of such a volume that a sneaker fits freely in it;
hand gloves;
sponge or old toothbrush;
petrolatum;
vinegar;
soda;
clean rags and napkins.

There are several options for how to paint sneakers at home. Choose the method that suits you and get involved in the transformation of your favorite couple. Detailed instructions on how to do this are presented later in our article.

Monochromatic painting

If you just want to give your shoes a different color, then this method of how to dye sneakers is perfect for you:

Dissolve the paint in water according to the instructions.
Lubricate the rubber parts liberally with Vaseline and dip the sneakers into the paint.
Wait 5-10 minutes, dip them in a bowl of water and vinegar to set the color.
After - you should rinse the shoes well under running water until it becomes transparent.
Air dry them, wash off the Vaseline from the rubber parts with baking soda and napkins.

Painting “Ombre”

For this painting you will need one tone of paint. Ombre is a type of coloring when the color intensity gradually decreases from saturated to pale. How to dye ombre fabric sneakers? Use the following guidelines:

Dilute the paint in the prepared container according to the instructions.
Lubricate the rubber parts of the shoes with petroleum jelly in advance so that they do not stain, remove removable parts and laces.

Important! You can test the intensity of the color on a piece of suitable fabric. If it turns out too bright, add water to the paint.

Protect your hands with gloves and dip the bottom of the sneaker into the paint.
Wait a couple of minutes.
Dip again, just a little deeper.
Dip the sneaker several times, deeper each time, until it is all painted over. Thus, the bottom will turn out much brighter than the top.
At the end of the staining, take a clean cloth and rub the paint so that the tone transitions are smooth. If necessary, dampen the cloth with water.
Now let the paint soak in for 5-10 minutes.
Dip the sneakers in a container of water and vinegar to set the color on the fabric.
Rinse dyed shoes thoroughly with running water.
Remove the Vaseline with baking soda and an old toothbrush. To do this, dip a wet brush in soda and wipe the rubber parts. Remove residues with wet wipes.

Important! For a complete makeover, you can also dye the laces. Then your old sneakers will become completely unrecognizable. And our methods will help to diversify shoes even more.

Multicolor staining

If you have the opportunity to purchase several colors of acrylic paint for fabric, then we will show you a number of ideas for original prints on how to paint sneakers at home.

Ikat

This is a kind of drawings on fabrics that came from the east. It is especially associated with Uzbekistan and India. Represents 2-3-color spots, rhombuses, zigzags with blurry jagged edges. In order to apply this technique on your sneakers, no special artistic gift is required:

First, protect the sole and toe with masking tape or petroleum jelly.
In different covers (from water), pour a little paint of 2 or 3 colors, each separately.
With a foam sponge, apply a larger circle, for example, blue.
Next, with another sponge in the middle, apply a smaller circle, for example, yellow.
In the very middle of the shoes, draw a small circle, for example white.
Now, with a clean, damp sponge, rub the borders of the drawing to make it look a little smudged.
Let the paint dry for about 15 hours and fix it with a hair dryer.

Marine theme. Oceania

You can easily depict on shoes, for example, a drawing on the theme of the ocean:

Cover the sole with masking tape.
On white sneakers, using thin and thick brushes, paint a pattern depicting sea waves and water splashes with blue acrylic fabric paint.
You can add shells with a thin brush, for example.
Let the drawing dry for a day and fix the result with a hair dryer.

Space theme. Galaxy

We all love to admire the stars at night and remember how in childhood we dreamed of becoming an astronaut. To make space a little closer, you can depict a whole galaxy on old sneakers. How to paint sneakers at home on this topic? For this:

purchase acrylic paints in white, pink, purple and blue;
you will also need foam sponges, brushes, an old toothbrush and masking tape.

Painting method:

First, cover the toe and sole of the sneaker with masking tape so that they do not get dirty when stained.
With a sponge, apply a blue background to the entire sneaker.
Apply blue and purple spots of different sizes in the form of clouds to the resulting background with a brush or a corner of a sponge.
Blend the drawing so that the center is bright and the edges are blurry.
Finally, dip your toothbrush into the white paint and run your fingernail along the bristles so that the white splatters get on the “nebulae” you created. These will be the stars.
Repeat the same steps symmetrically on the second shoe.
Let the shoes dry overnight.
Fix the color with a hair dryer.
Remove the tape and insert the laces of a suitable color.

Now your intergalactic sneakers are ready to fly.

colored splashes

For this painting technique, you only need bright acrylic paints, brushes and masking tape. Even a child can cope with such a task; artistic inclinations are not required for this. To dye fabric sneakers:

First, cover with masking tape all the parts of the shoe that should not be painted.
Cover the place where you are going to create with oilcloth or newspapers (you can do it on the street for convenience).
Squeeze some paint into the cap to make it easy to dip.
The paint should be liquid, so add water to it if necessary.
Put the sneakers on the mat.
Dip the brush into the paint and splatter it on the sneakers.
Let the sneakers dry overnight and iron them or blow on them with a hot hair dryer.

Important! Heat treatment significantly improves paint adhesion.

Try to combine bright colors so that the sneakers come out perky as a result, evoking associations with the festival of colors in India.

Drawings with markers and pen

In order to apply a small fantasy pattern, you can use fabric markers. Similar markers are sold in needlework stores or hobby centers:

Think of an ornament.
Apply it with a simple pencil on the shoe fabric.
Then draw with markers.

Important! Some craftsmen apply an ornament or inscriptions with a simple pen. This print looks quite original and stylish.

Sneakers or moccasins with polka dots look very cute. To do this, simply make a stencil in the form of a circle and use a sponge and acrylic paint to apply “peas” evenly over the entire surface of the shoe.
Black and white sneakers will look classic. Just paint some areas with black acrylic paint.
You can apply a geometric pattern, checks, stripes or a Greek meander to the fabric. For such patterns, it is more convenient to use the contours of the fabric. You can simply apply a bright edging with a contour.
It will be interesting to look just large strokes in different colors.

How to dye sneakers?

If for some reason you don’t want to give your sneakers to a shoe shop for painting, you can try to do it yourself. Moreover, the process is not a difficult job.

Painting steps:

Clean the sneakers from dust, dirt, shoe cream or wax residues, and dry them thoroughly.
Degrease the surface. You can use for this purpose a solution of laundry soap and ammonia.
Prepare your paint. It should match the type of material your sneakers are made from. It can be water-based paint, powder, acrylic, spray paint, cream paint and more.
Put on gloves.
Protect the sole with masking tape.
Take out the laces and paint your sneakers.

Important! Try to do this in one step, as the color may come out uneven. If you're spraying nubuck or velor, don't hold the spray can too close to your shoes or it will stain. Spray from the distance indicated in the instructions.

If the color turned out to be pale, then repeat the painting after a few hours.
Let the shoes dry for a day and you can safely wear your updated sneakers.

Decoration with sequins, rhinestones, sequins, spikes

Sneakers or slip-ons look very glamorous in a brilliant design. In order to “upgrade” your boring shoes, you need to purchase the following items in specialized stores:

glitter (in bulk in jars) of one or more colors;
fabric glue;
spikes or rhinestones for accent.

Decoration method:

To get started, cover the rubber parts of the sneaker with masking tape or plain tape and prepare everything you need.
Take a large brush and apply glue to the fabric.

Important! Do not apply glue all over the surface at once, otherwise the outermost areas will dry before you have time to sprinkle them with glitter. Work in parts.

Next, generously sprinkle this area with sparkles of the desired color, press them down a little with your fingers.
On the bottom, you can apply darker sparkles.
At the final stage of decoration, tap the shoes a little to remove excess sparkles.
Examine the sneakers. If there are empty areas, dot the glue and add glitter.

Important! Some craftsmen immediately mix glue with glitter and apply this composition to sneakers.

It remains to place accents in the form of rhinestones or metal cone-shaped spikes. They can be fixed with a glue gun, for example, on the front of the sneaker.
Instead of laces, you can insert satin ribbons.

Now you will look just fantastic in your "new" old sneakers, and catch the envious glances of your girlfriends.

Interesting ideas for transforming old sneakers

If you are ready to take the time not only to paint your sneakers, but also to more thorough actions, take one of the following ideas into service.

Wings

This idea will be especially interesting for children and teenagers:

Make a pattern of small wings (left and right).
Transfer the design to 4 pieces of artificial thin leather (2 front and 2 reverse, mirror images).
Insert a piece of felt or other dense fabric between them, glue and cut along the contour. You should have two wings.
Make holes along the edge, corresponding to the holes for the laces.
With a permanent marker, draw a feather pattern on both sides symmetrically.
Let the resulting decor dry and lace it to the shoes, one on the side of each sneaker.

Thanks to this decoration, your legs will literally acquire wings.

Down with laces

You can replace the laces with elastic fabric:

Take a wide elastic band or other dense stretchy fabric.
Measure from the sole (outside side) to the eyelets on the opposite side.
Cut and sew a little obliquely, tucking the edges of the elastic.
On the upper part of the sneaker, you can cover the eyelets with an elastic band, or you can sew under them.

Now you do not need to waste time tying your shoelaces and sneakers look creative.

Applique and embroidery

If you have embroidery skills, you can give your shoes originality with your own hands.

Take a simple pattern or ornament, put a sneaker on the fabric and embroider with a cross or stitch. It can be flowers, initials or a geometric ornament. Anything your imagination tells you.
You can buy ready-made appliques in sewing and needlework stores and sew them on shoes.
You can also crochet cotton thread laces. It will take no more than half an hour, but your sneakers will be with a twist.

How to make new shoes from old ones?

Very often we have old shoes in the bins, which are very comfortable, but no longer fashionable or just tired. The hand does not rise to throw them away, but I don’t want to wear them in this form.

If you spend a little time on them and be smart, you can get a “new” pair of shoes at no extra cost. What can we do for this? - Here are some of the simplest options:

Repaint. Purchase a shoe paint suitable for the material your shoes are made of (suede, leather, nubuck, etc.) from a specialized store. Protect the soles with masking tape and give your shoes a good coat of paint according to the instructions on the paint package.
If the shoes are fabric, then you can apply patterns on them with contour acrylic paints. And also with the help of fabric glue and sequins to give them chic.
You can attach brooches, bows, artificial flowers, buckles to the toes of the shoes with a glue gun.
If the nose of the shoe is peeled off, apply a layer of glue and sprinkle generously with sparkles. Then, when the glue is dry, top coat with clear nail polish.
Summer sandals and open shoes can be embroidered with beads or sequins.

The advice of a famous fashion designer will help transform old shoes according to the stylish trends of modern fashion:

There are actually many ideas for giving old shoes a new look. In this article, we have posted only the most interesting and simple options for finishing sneakers and sneakers. By following these helpful tips, you can enjoy wearing your favorite shoes for a few more seasons.

To change the color of leather boots, as well as other shoes, there may be several reasons: when scuffs occur during wear, after damage to the skin. We cannot cope with serious problems at home, but it is quite possible to change the shade and even out skin color.

To dye leather boots, you need to stock up:

a can of shoe paint or powder dye;
vinegar;
acetone;
alcohol;
castor oil.

We paint leather boots at home

You need to start by cleaning the shoes: washing off dirt, removing dust, drying the skin, wiping the boots with a soft suede cloth.

You need to decide on a coloring method. Get a special spray designed to change the color of the skin by one or two tones. Having picked up a tone that is most similar to the original color, remember that with a spray a cardinal color change is impossible. With it, you can refresh the original shade.

You can use powder dyes. But keep in mind that they give a rather weak shade, there may even be stains, since their main purpose is to dye leather clothes, which are completely dipped in a basin with a solution and kept for several hours.

Start by diluting the aniline dye. If you dilute it in water, you will achieve a not very intense shade, but soften the skin. If the solution is made based on acetone or alcohol, the shade will be brighter and the skin firmer. Make a concentrated solution. You can start by soaking a small piece of foam rubber in the solution and working on the inside of the boot, near the zipper.

After waiting for the composition to dry completely, you can begin to assess the quality of staining. If necessary, you can reduce or increase the concentration of the solution. The treatment of dyed and dried boots is carried out with a weak concentration of acetic solution, and then with castor oil. Then you can rub them with a terry cloth and apply a layer of shoe cream (colorless or colored) on top.

You can paint boots with a rich herbal composition, which is a decoction of oak bark with the addition of basma, henna or walnut shells. After processing the leather, the composition should dry, after which the shoes can be covered with butter and shoe polish.

For coloring boots made of colored leather, chemical compounds are used. For this purpose, stamp ink, pen paste, potassium permanganate, brilliant green, iodine, fukortsin, film developer are perfect.

You can also dye boots in a shoe shop. They will use the same products (sprays and creams) that we have listed for you, but you will also have to pay for it.

Unfortunately, even our most beloved and comfortable shoes lose their attractive appearance over time. And I really want to give her a second life. Let's try to figure out how to reanimate native shoes or boots. Can shoes be dyed? What products should be used to paint leather, rubber and suede shoes. What you need to remember when painting shoes, and is it possible to completely repaint shoes? Is it necessary to turn to professionals for this or are there ways to do it yourself?

We paint our own shoes

If you decide to eliminate defects in your shoes, make the color more saturated and bright, or completely repaint your shoes or boots, this can be entrusted to professionals in the shoe restoration studio, but you can also carry out this process yourself, at home. In this article, we will try to give you some tips that will help you understand how to repaint your shoes yourself, giving your favorite things a second life.

This is a very simple and budgetary way to transform your shoes. You just need to follow some rules and sequences.

It is important to remember that shoes are made from different materials, each of which needs a unique approach. For example, if you want to remove the flaws of white shoes, you need to be extremely careful when cleaning. Alcohol and acetone must not be used as this may damage the finish. Otherwise, the same algorithm is used for painting shoes.

shoe cleaning

The first step is to prepare the shoes for future painting. In order for the paint to lay perfectly, you need to clean and degrease the surface well. First you need to remove dust and dirt, residues of cream or wax from the shoes. To do this, there are special cleaners, which, as a rule, come complete with paint, but you can also use improvised means. For example, you can make a soapy solution and remove dirt with a cloth, you can add a small amount of ammonia.

After cleaning the shoes, you need to let them dry well, you should not use a battery or other heating device for this, as the shoes can dry out, stick out and deform.

The choice of coloring agent

Many people ask the question: how can you paint shoes? Depending on the material of your shoes and the result you want to achieve, you need to purchase a specialized shoe paint. It can be in the form of a spray, a ready-made water-based or other paint, or a powder coloring agent that must be prepared to make the paint. For decoration, you can use acrylic paint for shoes.

Today, the choice of paint products is more diverse than ever. You can choose both foreign and domestic manufacturers.

Shoe painting

Dyeing shoes at home is not difficult if you follow some rules.

Prepare a place where you will do this, away from children and food, preferably outside or in the open air. Attention! The paint has a pungent odor. So good ventilation of the room is necessary.
It is better to cover the floor with polyethylene or paper.
Depending on the type of paint, it can be applied with a brush, sponge, brush. Before painting, read the instructions for use. The paint should be applied evenly, in a thin layer. After staining, you need to evaluate the result, if there are any unpainted areas left.

Consolidation of the result

If you are satisfied with the result, leave the shoes to completely absorb and dry the paint.

Dye suede shoes

Suede shoes always look very impressive and rich. But nothing lasts forever, and over time, it loses its color, it can fade and rub, or you just wanted to repaint the shoes in a different color.

Suede shoes can be transformed by painting them with a special paint for suede. To do this, you must use the above mechanism, making sure in advance that the paint is intended for suede, and reading the instructions.

Be sure to wear gloves to avoid damaging your hands.

Particular attention should be paid to areas where, over time, the shoes began to shine or rubbed, and walk over them with a small brush. And now your favorite suede boots have changed.

How to dye leather shoes and leatherette shoes

Leather products and leatherette products are the easiest to paint, since the paint lays evenly, easily and accurately on such a surface.

If necessary, you can paint the shoes completely or tint partially.

With partial staining, it is recommended to seal the contour using, for example, paper tape, this will help you get a smooth and clear line. Then we use the above algorithm. Leather paint is usually in liquid or cream form, so pour it from the bottle into a more convenient container, stir and apply to the leather surface, paying particular attention to the joints and seams.

Paint your shoes in one go without distraction to avoid streaks. To achieve the maximum effect, you can repeat the process a couple of hours after the first staining.

After the paint is completely dry, apply care products to the shoes: cream, oil or wax.

How to dye rubber boots

Can rubber boots be dyed? Rubber shoes are made for rainy seasons to resist moisture. This material is problematic to repaint, but, nevertheless, it is still possible to create a creative individual design or eliminate some defects. To do this, you can use acrylic paint, enamel paint or another designed for rubber products, this can be checked with the seller.

Before painting, it is enough to wash rubber boots with water and wipe dry with a cloth, unlike leather boots, you should not wipe them with alcohol, the rubber may deteriorate.

To apply a picture or pattern, you can use a ready-made stencil or make it yourself.

After painting, rubber shoes are best left to dry for a few days.

How to paint a heel on a shoe or the sole of a shoe

All women are familiar with the situation when a heel stuck somewhere is damaged or scratched after being removed. The sole of the shoe is also often prone to scuffs. For modern technology, this is not a problem. You can completely repaint the shoes, or you can tint the heel and sole. The paint can be purchased at a specialty store, but the use of automotive paint in cans is not excluded, due to the abundance of colors.

Clean and degrease the heel or sole. It is advisable to remove the old paint with sandpaper and thinner if you want to paint shabby dark shoes in a rich black color, and if you have white shoes, this is not necessary.

Apply paint in a thin layer, repeat if necessary. If the shoes are lacquered, the heel can be varnished after painting.

How to dye nubuck shoes

Natural fabrics and natural materials are considered the most comfortable, pleasant and beneficial for the body. One of the most popular and elite types of genuine leather is nubuck. Shoes made of nubuck are very light, but nevertheless strong and durable. In order for high-quality shoes to serve you for a long time and justify their cost, you need to take care of them with high quality and care.

When painting nubuck shoes, you need to remember the most important thing: you can not spray paint close to the object. This may make the color look unnatural. Cover the floor well, put on clothes that you don't mind getting dirty, and spray the paint from a distance of 20-30 cm.

That's all. Let your shoes always look neat, because your image depends on it.

When worn, boots lose their color, stains, scratches and stripes appear on them, which are difficult to remove. But you can return the shoes to their original appearance by painting them. From this article you will learn whether it is possible to dye suede boots, shoes made of natural, artificial leather and rubber, how to do it and what coloring agents to use.

How to paint boots made of leather, suede, rubber? You need to use a special paint.

Compliance with simple rules will give your beloved couple a second life and significantly save your budget.

How to dye leather boots

For painting leather products, a special cream paint or spray dye is used. It is better to purchase paint in liquid form at a shoe store, which has a high level of durability. Leather shoes are painted in the following sequence.

Prepare shoes by removing dirt and dust from them. Wipe with alcohol. You can clean the skin with this solution: dilute a small piece of laundry soap in 1 glass of water. After treatment with this solution, dry the shoes well.
Paint boots, evenly applying paint with a sponge from toe to heel. It is necessary to paint over the seams and joints well. Be sure to stain without stopping so that unaesthetic stains do not form.
Leave the dyed shoes to dry for several hours.
If necessary, repeat the staining procedure to achieve a more saturated color.

It is possible to treat shoes with a can of shoe paint by spraying shoes, this option is preferable for suede products.

Can suede boots be dyed?

Suede shoes can also be dyed.

First, the couple needs to be cleaned. A special brush for suede is used, although you can clean with a regular brush. If the suede fibers stick together, you need to walk on the shoes with a rubber brush.
Start painting by picking up paint for suede in the form of an aerosol. Spray gently in small streaks. After applying one strip, you should wait a few minutes for the paint to dry. Then apply the next strip.
After painting, allow the shoes to dry.
Repeat the procedure for applying spray-paint a few more times.

It is important to remember that suede is a capricious material, so it must be handled with care. Knowing how to dye your boots will give them back a rich color without ruining the pile.

It is easiest to dye shoes black. But if you want to get a completely different shade, you will have to work hard, choosing the right color that will paint over the original one well.

How to dye rubber boots a different color

Repainting rubber shoes in a different color is very difficult, but it is quite possible to hide some defects and change its design. For these purposes, you can use.

Leather shoes are comfortable and durable, but over time, exposure to moisture, dirt, and chemicals can dull the color and wear the surface. You can improve the appearance, make boots or shoes attractive if you paint them with your own hands. This will require knowledge of painting techniques and a small cost to purchase the necessary materials.

You should not spend effort on updating cheap shoes made of low-quality leatherette or textiles. They are designed for a short lifespan. In this case, the work is not financially justified. And restored high-quality shoes made of genuine leather and suede will last for several more seasons.

In order to start painting shoes, you need to know the procedure and purchase materials. Must have:

means for cleaning and degreasing the skin;
grinding sponge, bar or nail file;
special paint for skin or liquid skin;
brush, sponge or brush;
masking tape.

It is better to choose specialized products that are sold in shoe departments and stores, as well as on websites. Their choice is quite large. Nitro enamel, oil and acrylic paints are not suitable for skin. When wearing shoes painted with such paint, cracks appear, it peels off and flakes off.

Preliminary preparation

Grease, dirt and dust - an obstacle to the adhesion of paint and leather. Before painting shoes, you need to carry out preparatory work. The quality of painting directly depends on how carefully they are made.

A properly prepared surface after painting has an even and saturated color. Preparation is carried out in several stages.

Cleaning and degreasing

In order for the paint to lay flat and not peel off during wear, it is necessary to first clean and degrease the skin. To do this, use one of the following tools:

professional solutions and foams;
wet wipes;
weak alcohol or soap solution.

Do not use gasoline, acetone or other solvents for degreasing. These products dry out and degrade the quality of the skin, making it brittle and rough.

It is best to use professional tools. The foam is sprayed over the surface, allowed to act for 5 minutes and wiped off with a soft cloth. Pre-moisten the cloth with the solution and wipe the skin thoroughly.

If there are no special means, they make an alcohol or soap solution with which shoes are treated. Alcohol for these purposes is taken ammonia, ethyl or ordinary vodka; soap - children's, economic. Alcohol is diluted with water in a ratio of 1:2; Soap is made into shavings and completely dissolved in warm water.

Sanding and drying

If there are scratches or abrasions on the skin, they are polished with a fine-grained sanding sponge or nail file. As a result, the surface becomes as smooth as possible. Liquid skin is used to remove deep cuts and cracks. It is applied with a small spatula in several stages, allowing the previous layer to dry.

After cleaning, degreasing and repairing cuts, shoes should dry well at room temperature. It is not worth forcing the drying process with a hot hair dryer or placing it on a battery. This may result in deformation of the product.

Before painting, it is desirable to close some elements of the shoe: buckles, buttons, inserts, welts, soles, heels. To do this, use masking tape.

Dyeing leather shoes

Skin paint is sold as a liquid, cream, or spray. The color is selected to match the shoes or darker. It is advisable to do a test coloring on a small inconspicuous area in order to finally determine the shade.

If there are abrasions on the skin that are very different in color, then they are pre-primed. This is especially true for white shoes, as dark scuffs contrast sharply with the white color of the skin. After the primer dries, proceed directly to painting.

It is important to apply a layer of paint on the shoes in one step so that there are no streaks and color differences! Usually once is not enough, and the coloring is repeated.

The use of paint requires precautions:

you need to work with gloves;
the surface on which the painting will take place must first be covered with paper or plastic wrap;
paint outdoors or in a well-ventilated area, as the paint has a pungent odor.

If the paint is liquid or in the form of a cream, then use a sponge, brush. The cream is squeezed out of the tube onto a sponge and applied to the skin with soft circular movements, trying not to rub. Liquid paint is applied with a brush. Using a spray, the balloon is held vertically at a distance of 20 cm from the product, sprayed evenly over the entire surface. Particular attention should be paid to seams and folds. They are painted more carefully.

Sometimes a fixer is sold with the paint, which is applied after the last coat of paint. It gives the color strength, dullness and a more saturated color. If there is no fixer, then after the shoes have dried, they are wiped with a damp cloth moistened with a mixture of water and vinegar.

It takes 1-2 days for final drying after painting. Before starting operation, it is necessary to check whether the paint has dried well. To do this, just run your hand over the painted surface. If no traces remain, then the shoes can be worn.

Suede shoe dyeing

Natural suede is beautiful and elegant, but difficult to care for and quickly loses its attractive appearance. Over time, suede boots and shoes become faded, untidy, shiny, the pile becomes clogged with dust and dirt. To return shoes to their original state, sprays are used to color suede.

Suede is well cleaned before dyeing. To do this, use a special brush that has two sides: one with hard bristles to remove dust and dirt, the other with rubber teeth to loosen the villi. Dry suede shoes are thoroughly cleaned with the bristle side, wiped with a degreasing solution, and the pile is loosened with the rubber side. The results are obtained by cleaning the suede with steam. You need to hold the shoes over the steam for 3-5 minutes, then brush them.

Glossy spots are treated with a weak solution of vinegar or a stationery eraser. Grease stains are removed with a cloth moistened with a mixture of ammonia and water in a ratio of 1:10. After cleaning, the shoes are dried well.

Then, carefully, with a very thin layer, paint is sprayed at the same distance from the shoe, and allowed to dry for 15 minutes. Coloring is repeated 2-3 times until the color of the desired intensity is obtained. The seams are painted over with a brush. After complete drying, the pile is lifted with a rubber brush, treated with a spray that protects against moisture and dirt.

Conclusion

In order for the painting of shoes at home to be successful and not disappoint with its result, you must consistently follow all the steps, using proven and high-quality materials. Paints for leather and suede have proven themselves well: Salamander, TM Tarrago, Silver, KIWI.

These paints contain natural ingredients and oils. They not only update and improve the appearance of shoes, but also take care of them, create a water-repellent coating.

Popular in category: