Crochet boots on the sole of the scheme lesson. knitted boots

In the warm season, you can often see crocheted knitted boots on the streets. Thanks to a large selection of shoes of various types and models, nowadays you can buy knitted boots in almost any shoe store or market. As a rule, such women's shoes are not particularly original, since all models either look the same or are not much different from each other. Therefore, women of fashion always keep track of the most fashionable trends.

Knitted boots

But if you are familiar with the technique of knitting or crocheting, you can easily knit beautiful and original knitted boots for yourself. You can choose knitting patterns for such shoes on the Internet, and you can choose the pattern for knitted boots that you like best.

Knitted summer boots

Another indisputable advantage of such shoes is that knitted summer boots do not require large material costs. All you need is knitting yarn and a crochet hook or knitting needles. If you are not a very experienced knitter, you can simplify your work. To do this, you will need a pair of old shoes (shoes can be with or without heels) or ballet flats that just need to be tied with thread. In this way, you will not only knit new durable boots for yourself, but also solve the problem with old shoes, which you don’t seem to be wearing anymore, and it’s a pity to throw them away.

For experienced needlewomen, crocheting or knitting summer boots to order can be an additional type of income, because very often on the Internet you can see the ad “I will buy knitted boots”.

You can knit fashionable women's boots in several ways, while the frame can be hard or soft. The sole for such shoes can also be hand-knitted, or you can use the sole from an old shoe if it is in good condition.

There are several types of knitted boots: fishnet boots for warm weather, glamorous stocking boots, tight winter or cozy home boots.

To crochet summer boots, you will need: a crochet hook or knitting needles, strong yarn (it is better to opt for linen, cotton or silk), a sole from an unnecessary pair of shoes, strong threads, an awl, a small skein of fishing line and glue.

Due to the fact that summer boots are knitted with an openwork pattern, they not only look beautiful, but are also comfortable and comfortable in the warm season.

Crochet knitted boots

First of all, you need to take measurements for future shoes by circling the foot on a sheet of cardboard and measuring the height of the rise. This is especially true for those who want tight fitting crochet boots. The patterns and patterns of knitting such shoes are practically no different from knitting free-cut boots.

If you are knitting boots for the first time, it is better to spend a little time studying and preparing a pattern that you can use to make a boots pattern. This will make it easier for you to work further, since nothing will have to be dissolved and bandaged again.

If you do not have a suitable sole for future knitted boots, you can purchase it at a store or shoe repair shop.

When choosing yarn, pay attention not only to its composition and quality, but also to its shade. Remember, white and all light shades are very easily soiled, so to make your boots look neat, you will have to wash them quite often, which can also affect their appearance. Of course, white boots look very elegant and beautiful, but if you wear them every day, they are unlikely to serve you for a long time. The size of the hook and knitting needles should correspond to the density of the yarn, but in any case, for the summer version of such shoes, you should not choose a large hook.

To determine the pattern and its density, you will need to knit a small fragment of the selected pattern and count the required number of loops. The upper and lower parts of the boots are knitted separately, and then connected to each other. In order for the fastening of parts to be reliable, a fishing line must be added to the working thread. You also need to consider that the upper part of the boots should be slightly larger than the circumference of the sole, otherwise wrinkles may appear that will spoil the appearance of the boots. To avoid such a mistake, consider this point when drawing up a boots template. The finished shoes will look much prettier if you starch them.

Knitted boots: master class

For boots of the thirty-eighth size, you will need: one hundred grams of dense cotton yarn, a crochet hook and a sole from an unnecessary pair of shoes.

The knitting density of one star is seven and a half by seven and a half centimeters.
The side part of the boots is knitted in the following way: the first row is knitted with single crochets; in the second row, a single crochet is knitted above the column of the first row, an air loop is knitted above the second column of the first row, and a single crochet is knitted above the third column of the first row. In this way, you need to knit to the end of the row.

To tie an asterisk, you must first make a ring consisting of eight air loops. In the first row, eleven single crochets are knitted into a ring. In the second row, a double crochet is knitted over all the columns of the first row, and three air loops are knitted between them. In the third row, three columns are knitted into the first arch, five air loops and three columns (the first column is knitted without a crochet) twice into subsequent arches. In this way, knit to the end of the row, where you should have one arch left.

First you will need to tie individual stars, the number of which will determine the height of your boots. For example, four stars are enough for low boots. To make the shaft, the stars need to be connected together in a circle. After that, you can start knitting the top of the boots. To do this, you need to circle your foot on paper. You also need to measure the lift height. To make the boots neat and wrinkle-free, the circumference of the sole should be two centimeters less than the top of the boots.

You will need one asterisk for the top of the front of the shoe, only for it in the third row you need to knit two single crochets and four air loops into all arches.

To tie the toe, dial a chain four centimeters long. On the sides of the shoes, knit a pattern, adding loops evenly until the width of the fabric reaches fifteen centimeters. The toe of the boot should be seven centimeters long.

When you knit the last row, instead of three central patterns, knit one air loop and two columns without a crochet, then connect the toe with an asterisk using two arches. When the height of the sides reaches six centimeters in the middle of every second row, the stars must be connected to three arches. When you have three arches left, continue knitting straight, without knitting four centimeters to the heel. These four centimeters need to be knitted across. You need to connect the parts of the boot to each other with single crochets and double crochets. Finished boots will look better if starched.

Those for whom knitted boots with patterns seem like a difficult task can try to knit original boots based on old shoes.

They are made quite simply, and thanks to the hard sole, the appearance of such boots will not be spoiled by long wear or regular washing.

To knit such light fishnet boots you will need: ballet flats or slip-ons with rubber soles (the color of the shoes must be selected according to the color of the future boots), one hundred grams of yarn, a large needle and a hook.

First you need to sheathe the base - the shoes are round, and try to place the chain stitch (it is also called a chain) as close to the sole as possible. After that, you need to start crocheting with double crochets, which are knitted around in each of the links of the chain stitch. The base must be tied tightly so that it looks completely tied with yarn. If necessary, in certain places you can add and subtract loops. In this way, you will need to knit about eight rows.

When you tie the toe and heel of the base, instead of double crochets, you will need to knit double crochets. After that, you will need to tie a pipe with an openwork pattern, which will be the top of the boot. The finished bootleg must be sewn to the tied shoes. The top of the boot can be decorated with a beautiful border, and so that the boots do not slip, the top of the border can be slightly narrowed. When the boots are ready, they need to be washed and made more rigid. To do this, after washing, soak the boots in a solution of water and PVA glue in a ratio of two to one.

Detailed master class: How to crochet boots from square motifs

Master Class: Crochet boots

Shoes may vary. Knitted, she, perhaps, claims to be the most original version. Handmade ugg boots are in no way inferior to their Australian prototypes. Ugg boots can be warm, made of wool yarn, or light, openwork made of cotton. In any case, winter boots or summer boots, they are very comfortable. And yet, if you show imagination, they can be very glamorous. Knitted boots with knitting needles for adults and children will definitely win your love! It remains only to tie them with your own hands. And that is exactly what we suggest you do now.

White women's home knitted boots

Sizes: 35-37; 38-39; 40-42.
Shoes have sole length: 22; 24; 26cm.

To tie such shoes we will need:

  • yarn, 100% wool (50g per 50m) - 200; 250; 250g;
  • a set of stocking knitting needles No6;
  • markers;
  • buttons - 8 pieces.

Patterns:

Density: on a garter stitch 13p. for 26r. are equal to 10 cm by 10 cm.

Master class: knitting uggs with knitting needles

The lower part, its upper part - a master class on knitting

Next, we will work with the first 9; eleven; 11p., the rest 27; 27; 29p. shoot on auxiliary knitting needle. At 9; eleven; 11p. we knit a scarf pattern, adding 1p in the 1st row. on the sides - they will be edging and add 1p. in the center. For her, we make a crochet, which we then knit a cross. n. We have 12 in total; 14; 14p.

We continue: knit 1kr, pattern A.1, 1kr. We knit a vertical rapport cx. A.1 4; 5; 6 times. We get length 7; 8.5; 10cm Following. R. we reduce the edge points and the central point. We get 9; eleven; 11p. We take the pending p. into work and raise it on the sides from the center. parts of 12; 14; 16p. It turns out 60; 66; 72p. In the future, in the work, we will perform measurements from this place. Set the marker to the center. n. front and center. p. on the back.

The upper part of the ugg boots - a master class on knitting

We must knit in straight/reverse rows. We start with faces. sides. We collect 3p., Then we raise along the upper edge of the lower part 36; 36; 39p., Then we collect another 3p. (this will be the button placket). We have 42; 42; 45p.

Track. knit a row like this: 3p. - handkerchief. knitting (bar), * 3 persons., 1n. * - from * to * we repeat up to 3 extreme points. These are the loops of the second bar. We knit them with a scarf pattern. We have 54; 54; 58p. We knit a trace. a row with knitting needles on the front side (crochet tie a cross. p.). Then knit another 1 p. purl P.

Track. R.: 3p. slats - shawl. pattern, loops of scheme A.2 repeated 12; 12; 13 times, 3p. - the second plank.
We continue to knit shoes using this master class and patterns up to a shaft height of 12 cm. We end with the last row of the scheme. Then knit 4p. garter pattern, in the first of which subtract 1p. over each braid. We have 42; 42; 45p. Close P.

For the second boot, knit the bootleg in a mirror image using the same master class.

Assembly

We place the slats on the overlay, sew with buttons. Home shoes are ready!

We knit boots-slippers on felt soles: video mk

Homemade knitted ugg boots

Outsole length: 22; 24; 26cm.
To knit such shoes we need:

  • yarn, 100% wool, (50g per 50m) - 300g each for any size;
  • knitting needles straight No6;
  • a set of stocking knitting needles No6;
  • markers;
  • buttons - 6 pcs.

Patterns:

  • garter stitch: with forward / reverse knitting, all stitches in all rows are knit; when knitting in a round - we alternate a row of facial stitches with a row of purl stitches;
  • embossed braids: execution according to the instructions of the scheme.

Density: on persons. iron 13p. on the 17th are equal to 10 cm by 10 cm.

Master class: knit ugg boots

Lower part, its upper part

We collect stocking knitting needles 36; 38; 40p. and knit 4p. kerchief pattern. The last r. must be purl.

Next, we will work with the first 9; eleven; 11p., the rest 27; 27; 29p. shoot on auxiliary knitting needle. At 9; eleven; 11p. we knit a scarf pattern, adding 1p in the 1st row. on the sides - they will be edging. We have 11 in total; 13; 13p. We knit this part to 7; 8.5; 10cm high. Close edge loops. The number of points we have returned to the original 9; eleven; 11p.

We return the postponed loops to work and still get on the sides from the center. details of 12; 14; 16p. We have 60 in total; 66; 72p.

In the future, in the work, we will perform measurements from this place. Set the marker to the center. n. front and center. p. on the back.

We continue to knit homemade uggs with a garter pattern with stocking knitting needles in a circle. At a height of 2 cm on the sides of each marker we knit 2p. in 1 person. Decrease 4 stitches in total. We continue to knit and 5; 5; 6cm closed p. We make a seam on the sole of the ugg boots.

Upper part - knitted separately

Cast on 22 sts with needles. We knit 2p. garter pattern, adding 6p in the second row. The increments are distributed at regular intervals. We get 28p. Next, women's knitted boots are made according to the patterns of scheme A.1. We knit up to level 32; 33; 35 cm, decreasing in the last row in the braid sections of 3p. We do this by knitting 2p. in 1l. We have 22p. We knit our shoes for another 2p. garter pattern and closure. P.

We connect the canvas in a circle (see photo). Sew on the buttons to secure the connection.

We place the top piece over the bottom piece with an overlap of 2 cm and sew. Homemade knitted boots are ready!

Knitted boots with knitting needles: video master class

Children's knitted ugg boots

Knitting children's ugg boots using our master class is very simple. Solving the problem will require very little time and the availability of the right yarn. Here, be especially careful! Knitted shoes for children should be warm, practical and comfortable. The yarn of choice for children's models are natural threads: wool, cotton.

Homemade children's ugg boots, a knitting master class of which is presented below, are knitted from b / w yarn. If you want to knit summer boots for your child, use cotton yarn. The main thing is that it fits in thickness.

The master class allows you to make children's knitted boots in four sizes.
Child's age: 0-2; 2-6; 6-12; 12-24 months.
Foot length: 5-6; 7-8; 8.5-10; 11-12; 13-14 cm.
To knit baby uggs we will need:

  • yarn, 100% merino (50g per 170m) - 50g for all sizes;
  • knitting needles No3;
  • buttons - 4 pcs.

Patterns:

  • shawl pattern: all sts in all rows - facial.

Density: 26p. equal to 10cm.

How to knit a buttonhole

Close 2p., in the next. in a row above the closed ones we collect 2 new p.

How to tie children's ugg boots - a master class

We start knitting homemade boots with a set of knitting needles No3 48; 55; 58; 62; 65p. Link 1; 1; 1.5; 1.5; 1.5cm garter pattern. Following. R. on the left, without knitting a row to the last 3 sts, we make the 1st loop under the button. At a height of 2.5; 2.5; 3; 3; 4 cm we make the second loop.

Having knitted 3-3.5; 3.5-4; 4; 4.5; 5cm closed initial 16; 17; 18; 20; 21p. at the beginning of the river by out. side. We have 34; 38; 40; 42; 44p. We continue to knit shawl shoes. pattern. On size 5; 6-6.5; 7; 7.5; 7.5-8cm subtract 9; eleven; eleven; 12; 13p. Decreases are made at regular intervals. We have 25; 27; 29; thirty; 31p.
On size 6.5; 7.5-8; 8.5; 9; 9-9.5 cm we perform an increase of 7; 9; 9; 10; 11p., completing it at regular intervals. We have a total of 32; 36; 38; 40; 42p.

We shoot extra. knitting needles or holders extreme 11; 13; 13; 14; 14p. on both sides. Further we work only with the central 10; 10; 12; 12; 14p. Knit 3; 3.5; 4; 4; 4.5-5cm.

Again, we take the pending sts into work. To do this, we transplant them onto the working knitting needles and at the same time raise 7 on the sides of the central part; 8; 8; 9; 9p. We continue on these points to perform a scarf pattern for another 1.5; 2; 2; 2; 2cm Close n., except for the central 10; 10; 12; 12; 14p. We knit 5-6 on them; 7-8; 8.5-10; 11-12; 13-14cm in length. Close n. We carry out a seam on the sole and on the shaft.

Knit the second boot using the same patterns, but in a mirror image.

Sew on buttons.

Knitted slippers-boots: video MK

Selection of schemes

Summer openwork boots have been filling store shelves with fashionable models for several years in a row. But sometimes it is very difficult to choose such shoes for the leg, but you want to be in trend.

There is an exit. Crochet stylish boots yourself, choosing your favorite yarn, style, colorful accessories for decoration.

How to crochet homemade boots

To begin with, try to make simple indoor boots, and then move on to more complex styles. Prepare for work: woolen yarn or acrylic - 100 gr, hook number 3, awl, felt insoles. Boots will be assembled from 10 hexagons, five per foot. Knit motifs in a circle, weaving threads of different colors.

We knit motives

Designations: c.p. - air loop, art. b / n, art. s / n, art. s / 2n. - single crochet, double crochet, double crochet.

  • Dial 6 vp, close in the ring.
  • The first fragment - 4 ch, 15 st.s / 2n.
  • The second fragment - ch 2, 17 lush columns.
  • The third fragment - ch 2 lifting, nakid. Further relief columns in a circle.
  • The fourth fragment - ch 3 lifting + 2 st.s / n. in the arch, 3 st.s / n. in the next two arches, repeat to the end of the row.
  • Fifth fragment - 1 v.p. lifting, 3 st. / n. in the same loop, 1 st.b / n. in the next 10 loops. Then 3 st.b / n. in 11 loop.

If in doubt, see the diagram.

Making the top of the boots

Having knitted all the motives, collect them 5 pieces in a boot. Connect the parts together with single crochets. Start fastening the product from below, taking two blanks on the heel, one folded in the middle on the toe. The remaining two figures will go to the bootleg. Motifs can be any color, depending on your preference.


We collect boots

  • Take the insole along the leg.
  • Poke holes with an awl along the edge of the workpiece with a distance of 1 cm between them.
  • Tie the insole according to its shape with ordinary columns in three rows.
  • Tie the workpiece to the soles of st.b / n.

Comfortable boots are ready. They are perfect for a home dressing gown, giving everyday clothes a piquancy and zest.


How to crochet fishnet boots

Knit light summer boots from mixed or viscose threads. They will need about 150 grams, depending on the height of the shaft. Also prepare a thick needle, an awl, a hook and ballet flats, which will become the basis of your boots.

  • Sew the shoes with a chain stitch along the outside, making stitches at a distance of 0.5 cm from the sole.
  • Knit round st.s / n. - 8 rows, add or decrease the number of loops if necessary.
  • Toe and heel issue st.s 2 / n.
  • The bootleg connected by the chosen pattern, baste to the ballet flat.
  • Decorate the top of the product with a narrowed border so that the boots do not slip from the shin to the heels.

Tip: soak the product for a quarter of an hour in a starch solution and it will keep its shape for a long time.


Crochet patterns for knitting boots

Having understood the principle of making shoes, take on more difficult work. Check out our selection of models, get creative with decorations and get a pair of exclusive boots.

Lace boots with solid soles

Make such bundles from cotton yarn with lavsan. Cut off the textile top of the sports slippers - the sole is ready. Then decorate the rise, sides, heel with double crochets and get a boot to which you attach the bootleg. An openwork pipe is made from separate fragments of lace, which are connected in the process of work.


Lightweight boots in cotton yarn

If you have old moccasins, transform them into dainty boots by cutting off the straps and tying the base like booties with a patterned top. Knit the boot in the round with the desired pattern.

When soiled, wash bundles in warm soapy water. Rinse, starch.

Tip: dry your boots without wringing them by pulling them over plastic bottles of cold water.


So the job is done. Put on and wear a new thing with whatever you want: a dress, shorts, jeans - and you will look bright, stylish, unusual.

Crocheted boots with felt soles will be soft, warm and beautiful. Felt insoles do not knock on the floor, are thicker than a knitted sole and significantly save threads and time spent on knitting.

To create such knitted boots we will need felt insoles (they are the most inexpensive and are sold in shoe stores).

You can choose the thread color and composition of the yarn yourself, we use handmade pekhorka, high-volume acrylic, 50 g / 200 m in length. In total, boots will need about 100 grams of yarn.


Hook take number 2. Also, to prepare the insole, we need nylon threads, you can, of course, use yarn, but it will quickly wear out on the floor from wearing, so it’s better to take nylon threads, not very thin, such can be found in fishing and hunting or hardware stores.

Master class: how to knit boots

Using a needle and thread, we sew the insole with a looped seam around the entire edge.
By the way, nylon threads very easily spread out of the knot, so it would be nice to melt their ends to the knot.


Then the actual boots begin.

Bottom.
1 row. We start from the middle of the heel. We tie the entire perimeter with columns without a crochet.


We got 130 sc (single crochet).

2 - 4 rows. 130 sc.
5 row. 130 - 1 = 129 sc. On the toe itself, in the middle, we will reduce the loops by one. After the column, we pull out one loop on the hook, then another one and knit all three with one loop.


Then we knit as knitted.
6 row. 129 - 2 = 127 sc. We repeat the reduction on the toe, but not in the middle of the toe, but in the corners that are on the insole. About 6 columns will remain in the middle, and they must be kept unchanged on other rows.


7 row. 127 - 2 = 125 sc. We make cuts there.
8 row. 125 - 2 = 123 sc. We shorten it the same way.
9 row. 123 - 2 = 121 sc.

10 row. Let's also start up to the moment when we made two reductions in the row, immediately after the reduction, we will make 1 connection. loop into the next column of the row in order, turn around, make 1 pass and knit the same 6 unchanged columns on the toe. Let's make one more loop skip and one conn. loop into the next column in order and unfold the slippers. We will make 6 front columns, make a cut again and continue the row to the end.

11 row. We reach the toe, 2 cuts, 1 ch (connecting loop) unfold, 6 sbn, 1 cut, 1sp, Let's return to the front side, 6 sbn, 1 cut and extend the row.


12 - 18 rows. We repeat the 11th row.


19 - 21 rows. 72 sc.

Shin.
22 row. Our row starts and ends at the heel. 4 runways (lifting air loop), then through the column we make 1 double crochet (ch), 1 air loop (ch), 1 ch, 1 ch. Until the end of the row. we knit.


23 row. In each opening formed between the double crochets, we make a magnificent column.


24 row. Let's do it like row 22.


25 row. Let's do it like row 23.
26 - 37 rows. 4 ch, 1 ch, 1 ch, 1 dc, 1 ch, to the end.
38 row. In the gap between the double crochets, we make 36 ps.
39 row. Again the row is as follows: 1ch, 1 ch, 1 dc, 1 ch and so on.

40 row. Let's repeat the 38th row with ps.
41 row. In this row, we make columns with a crochet in each loop of the underlying row 72 s.
42 row. We will complete the boot 72 sbn, cut off and hide the thread.


Finishing.
For finishing, we have prepared some gray and white yarn of the same thickness. At the end of the thread, it is very convenient to make a loop and apply it as the first loop.


In the mesh part of the lower leg, preferably at the back, we begin to pull out the loops with a gray thread and knit through the mesh.


The gray track is embroidered.


Let's do the same with a white thread in the remaining empty openings.


Now we decorate the sock. On the bottom row of double crochets, we sew a row with a white thread.


Go through the sock, fasten and cut the thread.


We do the second boot in the same way.


Cord and tassels.
We cut several threads at once about 80 - 90 cm and fix one end with a knot.


Weave a pigtail and also tie the other end. You can immediately make a second pigtail.


We cut the threads for the brush of the length that we determined for ourselves, but multiplied by two, we thread the thread inside with which we will tie the brush itself to the cord. We put the lace on top of the bundle and tie it above the knot. The knot will slow down and the lace will not crawl out of the brush.


We straighten the threads around the cord and drag it across with another thread.


We put one end into the boot, and you can repeat the other brush on the other end of the rope.


Boots are finished, you can measure.


Boots can be any color and pattern of your choice. It all depends on imagination and desire.


Knitted shoes is now at the peak of popularity among children and youth. Especially when it comes to knitted boots. To keep the boots in shape, choose crochet.
Especially for the Lessons of Needlework by Dina Kiseleva.

In the warm season, you can often see crocheted knitted boots on the streets. Thanks to a large selection of shoes of various types and models, nowadays you can buy knitted boots in almost any shoe store or market. As a rule, such women's shoes are not particularly original, since all models either look the same or are not much different from each other. Therefore, women of fashion always keep track of the most fashionable trends.

Knitted boots

But if you are familiar with the technique of knitting or crocheting, you can easily knit beautiful and original knitted boots for yourself. You can choose knitting patterns for such shoes on the Internet, and you can choose the pattern for knitted boots that you like best.

Knitted summer boots

Another indisputable advantage of such shoes is that knitted summer boots do not require large material costs. All you need is knitting yarn and a crochet hook or knitting needles. If you are not a very experienced knitter, you can simplify your work. To do this, you will need a pair of old shoes (shoes can be with or without heels) or ballet flats that just need to be tied with thread. In this way, you will not only knit new durable boots for yourself, but also solve the problem with old shoes, which you don’t seem to be wearing anymore, and it’s a pity to throw them away.

For experienced needlewomen, crocheting or knitting summer boots to order can be an additional type of income, because very often on the Internet you can see the ad “I will buy knitted boots”.

You can knit fashionable women's boots in several ways, while the frame can be hard or soft. The sole for such shoes can also be hand-knitted, or you can use the sole from an old shoe if it is in good condition.


There are several types of knitted boots: fishnet boots for warm weather, glamorous stocking boots, tight winter or cozy home boots.

To crochet summer boots, you will need: a crochet hook or knitting needles, strong yarn (it is better to opt for linen, cotton or silk), the sole from an unnecessary pair of shoes, strong threads, an awl, a small skein of fishing line and glue.

Due to the fact that summer boots are knitted with an openwork pattern, they not only look beautiful, but are also comfortable and comfortable in the warm season.


Crochet knitted boots

First of all, you need to take measurements for future shoes by circling the foot on a sheet of cardboard and measuring the height of the rise. This is especially true for those who want tight fitting crochet boots. The patterns and patterns of knitting such shoes are practically no different from knitting free-cut boots.


If you're knitting boots for the first time, it's best to spend a little time learning how to crochet for beginners and prepare a pattern from which you can pattern boots. This will make it easier for you to work further, since nothing will have to be dissolved and bandaged again.

If you do not have a suitable sole for future knitted boots, you can purchase it at a store or shoe repair shop.

When choosing yarn, pay attention not only to its composition and quality, but also to its shade. Remember, white and all light shades are very easily soiled, so to make your boots look neat, you will have to wash them quite often, which can also affect their appearance. Of course, white boots look very elegant and beautiful, but if you wear them every day, they are unlikely to serve you for a long time. The size of the hook and knitting needles should correspond to the density of the yarn, but in any case, for the summer version of such shoes, you should not choose a large hook.

To determine the pattern and its density, you will need to knit a small fragment of the selected pattern and count the required number of loops. The upper and lower parts of the boots are knitted separately, and then connected to each other. In order for the fastening of parts to be reliable, a fishing line must be added to the working thread. You also need to consider that the upper part of the boots should be slightly larger than the circumference of the sole, otherwise wrinkles may appear that will spoil the appearance of the boots. To avoid such a mistake, consider this point when drawing up a boots template. The finished shoes will look much prettier if you starch them.

Knitted boots: master class

For boots of the thirty-eighth size, you will need: one hundred grams of dense cotton yarn, a crochet hook and a sole from an unnecessary pair of shoes.

The knitting density of one star is seven and a half by seven and a half centimeters.
The side part of the boots is knitted in the following way: the first row is knitted with single crochets; in the second row, a single crochet is knitted above the column of the first row, an air loop is knitted above the second column of the first row, and a single crochet is knitted above the third column of the first row. In this way, you need to knit to the end of the row.

To tie an asterisk, you must first make a ring consisting of eight air loops. In the first row, eleven single crochets are knitted into a ring. In the second row, a double crochet is knitted over all the columns of the first row, and three air loops are knitted between them. In the third row, three columns are knitted into the first arch, five air loops and three columns (the first column is knitted without a crochet) twice into subsequent arches. In this way, knit to the end of the row, where you should have one arch left.

First you will need to tie individual stars, the number of which will determine the height of your boots. For example, four stars are enough for low boots. To make the shaft, the stars need to be connected together in a circle. After that, you can start knitting the top of the boots. To do this, you need to circle your foot on paper. You also need to measure the lift height. To make the boots neat and wrinkle-free, the circumference of the sole should be two centimeters less than the top of the boots.

You will need one asterisk for the top of the front of the shoe, only for it in the third row you need to knit two single crochets and four air loops into all arches.

To tie the toe, dial a chain four centimeters long. On the sides of the shoes, knit a pattern, adding loops evenly until the width of the fabric reaches fifteen centimeters. The toe of the boot should be seven centimeters long.

When you knit the last row, instead of three central patterns, knit one air loop and two columns without a crochet, then connect the toe with an asterisk using two arches. When the height of the sides reaches six centimeters in the middle of every second row, the stars must be connected to three arches. When you have three arches left, continue knitting straight, without knitting four centimeters to the heel. These four centimeters need to be knitted across. You need to connect the parts of the boot to each other with single crochets and double crochets. Finished boots will look better if starched.

Those for whom knitted boots with patterns seem like a difficult task can try to knit original boots based on old shoes.


They are made quite simply, and thanks to the hard sole, the appearance of such boots will not be spoiled by long wear or regular washing.

To knit such light fishnet boots you will need: ballet flats or slip-ons with rubber soles (the color of the shoes must be selected according to the color of the future boots), one hundred grams of yarn, a large needle and a hook.

First you need to sheathe the base - the shoes are round, and try to place the chain stitch (it is also called a chain) as close to the sole as possible. After that, you need to start crocheting with double crochets, which are knitted around in each of the links of the chain stitch. The base must be tied tightly so that it looks completely tied with yarn. If necessary, in certain places you can add and subtract loops. In this way, you will need to knit about eight rows.

When you tie the toe and heel of the warp, instead of double crochets, you will need to knit double crochets. After that, you will need to tie a pipe with an openwork pattern, which will be the top of the boot. The finished bootleg must be sewn to the tied shoes. The top of the boot can be decorated with a beautiful border, and so that the boots do not slip, the top of the border can be slightly narrowed. When the boots are ready, they need to be washed and made more rigid. To do this, after washing, soak the boots in a solution of water and PVA glue in a ratio of two to one.

Detailed master class: How to crochet boots from square motifs:

Master class: Crochet boots

Now you know that everyone can knit crocheted crocheted boots and you can do it quickly enough.

Knitted knitted boots look no less beautiful and stylish. Knitting such cozy and comfortable shoes is easy. Of course, knitted boots will be warmer than crocheted boots, but they will keep your feet warm in cool weather.

Save so you don't lose.


Top