Do-it-yourself paper headband. It's simple: how to make a bezel with your own hands

Do you want to update your hairstyle with original jewelry? Learn how to DIY. Using the simplest technology, you can make this accessory in half an hour. There are options for advanced craftswomen. If you work hard, you will get a real masterpiece that everyone will admire.

Techniques and Options

If you are interested in how to do it quickly and beautifully, here you will find the answer to this question. There are options that require a lot of hard work, but the result is worth it.

So, you can make the product in the following ways:

• From the decor taken from purchased hairpins.
• Using satin ribbons.
• From artificial ready-made flowers.
• Having completed independently blanks from paper or fabric.
• Applying the technique of kanzashi or quilling.
• By crocheting the necessary elements.

If, after reading the list, you are confused and do not know how to take photos and a brief description of the methods below will help you make your choice.

The easiest method

If you have very little time, or you have no experience in needlework at all, then this option is a great opportunity to make yourself an original decoration quickly. The sequence of actions is as follows:

1. Buy several hair ties with flowers of the type, size and shade you like, as well as a headband, preferably the right tone right away.
2. Cut or peel off the flowers from the rubber bands, make a composition out of them and glue them to the headband.

All is ready. To make such a decoration is available to anyone.

How to make a headband with flowers with your own hands: a master class

You can make a very beautiful product from ribbons. In this method, ribbons of the same or different shades and widths are used as the main consumable. As a basis - a purchased bezel of any tone and type.

The sequence of work is as follows:

1. Take the headband blank and wrap it with satin ribbons in a spiral. For reliability, it is better to apply glue to the surface of the rim (at least in several places).
2. Make some bows or twist roses. It is better when the elements are of different sizes. They make a beautiful composition. The middle of the bows is easy to decorate with beads.
3. Assemble the product by gluing the decor onto the prepared rim. Its free surface can be decorated with beads.

This option allows you to make several accessories that differ in design in a short time. It is enough to take tapes of different widths and shades.

How to use ready-made flowers?

If you want to make floral motifs on the decoration, you can use artificial bouquets and compositions for the interior.

Buy a few branches and disassemble them into individual elements. Prepare the headband, you can wrap it with satin ribbon, fabric, braid, yarn. The following describes how to make a bezel with Step by step work looks like this:

1. After preparing all the starting materials, take the bezel and glue the large flowers first.
2. Place small details in between: leaves, buds.
3. Glue additional decor.

This is how you can quickly create a beautiful accessory. Unlike the first method, where you are limited to the colors with which you can find elastic bands, here the range of initial blanks is much wider. This will diversify the created hair ornaments.

paper flowers

You have already read how to make a flower headband with your own hands in several ways. These are simple and fast options. If you want more creativity and originality, make a floral decor yourself. Then your product will be completely unique. It is very easy to make paper flowers. They look natural, just like the real thing. This will take more time and patience, but in this way you can make a headband with any colors you want, and not with those that you could buy.

The assembly scheme of the product is the same in all variants. You have already studied it. Flowers are made as follows:

1. Prepare paper in the desired colors. As a rule, corrugated, crepe is used, although from an ordinary sheet, which does not stretch and without texture, you can also get spectacular floral elements. If you are going to make leaves, you definitely need green paper or ribbon. You will also need scissors, glue, a pencil and a small piece of cardboard.
2. When everything you need is in front of you, you can start creating blanks. Draw petal patterns on cardboard and cut them out.
3. Give volume to flat parts. Corrugated and crepe paper is easily stretched by fingers.
4. Make the middle and leaves.
5. Gather all the details of the flower into one and do the same with each.
6. When all the parts are assembled, proceed to the assembly of the rim.

As you can see, from improvised inexpensive materials you can create amazing beauty and fashionable jewelry.

Textile headband with flowers

How to make a headband with flowers with your own hands? A master class (a photo of the finished product is below) will help you with this. In the previous section, the technology for making paper decor was considered. This is where fabric is used. Depending on the look of the flowers you want, you can use both natural and synthetic materials.

To create realistic elements, chiffon, nylon are suitable. For simplified colors, you can even take fleece or felt. The fabric works like this:

1. As with paper, blanks of petals and other details are cut out of chiffon.
2. Here it is necessary to process the edges of the elements over the flame of a candle so that the threads do not crumble. This operation also gives volume to the petals.
3. Separately make the middle (pistil) and stamens, if necessary.
4. Elements can be neatly sewn together or glued together.

The assembly and decoration of the rim are performed similarly to the previous options.

Kanzashi technique

In addition to the above, there is another way to make a do-it-yourself headband with flowers from ribbons. This is a very time consuming method compared to all previously discussed. Made in the technique are decorative (unrealistic), but very unusual, bright and beautiful.

For manufacturing, as a rule, wide ones are used. They are cut into squares, in which it is necessary to carefully process the edges over the flame. The resulting blanks are folded in different ways into parts that look like petals. Small blanks can be glued together, sewn together or connected by melting the material with fire. Using different colors and schemes for folding blanks, very diverse compositions are obtained. These decorations look spectacular on the headband, and on hairpins, and on elastic bands. It will be original to create a single set in this way.

You learned how to make a headband with flowers with your own hands. Choose the method you like, prepare materials and tools. Create spectacular decorations yourself.

At the New Year's party in kindergarten, it is customary to dress up children in different costumes. The images of forest animals, including the squirrel, have long been established. Recently, parents buy costumes for children, but part of the outfit, for example, a mask, can be made at home with the child.

https://youtu.be/aurE39oncDk

Squirrel mask "glasses"

In order to independently make a mask of a squirrel, which will be worn by children on their faces, you will need:

1. Colored cardboard or paper.
2. Pencil.
3. Scissors.
4. Rubber.
5. PVA glue.

The squirrel mask can be made from cardboard or paper. What kind of material to choose, everyone can decide individually based on how long such an attribute should last. After the material has been selected, you can get to work. Production takes place in several stages:

1. On the wrong side of the paper or cardboard, you need to mark the lines of the future mask. It will consist of several parts of white and orange colors. Below is an example template for each color.

On white paper, you need to draw the following shapes:

And on orange, only one, it will serve as the basis:

The sizes depend on how old the child is, so everyone will choose them for themselves. The main thing to remember is that the mask should not be lower than the nose.

1. Now, on the main part of the orange color, you need to cut out eye holes, and also make small holes at the edges. Both ends of the elastic are threaded into them and tied with a knot for fastening. The size of the elastic can be measured by applying it to the child's head from earlobe to earlobe through the back of the head and adding 5 cm.
2. Next, the white part No. 1 needs to be glued to the orange base so as to close the holes through which the elastic is threaded. In this case, the ends of the latter should be elongated by 2-3 cm. As a result, the mask will acquire fluffy cheeks.

1. After that, you need to glue decorative triangles on the ears and draw a nose with a black felt-tip pen or gouache.

The resulting squirrel mask will appeal to the child much more than the purchased one, since he made it himself. Parents can additionally decorate the ears of the craft with fluffy tassels or in another way.

But children start going to kindergarten from the age of 2, and parents do not always have the opportunity to sit down with the child and help make the outfit. Then a faster and easier way to assemble the mask with your own hands will do.

Squirrel mask "rim"

For the youngest children, a method is suitable in which nothing complicated is required, in addition to curly cutting, and its complexity depends on the efforts of the parents (later it will become clear why). The mask is a rim, and the squirrel that is attached to it is a printed picture. For this method you need:

1. White paper.
2. Orange cardboard.
3. Scissors.
4. PVA glue.
5. Paperclips.

It will take no more than five minutes to make such a mask:

1. The role of the gum in this case will be played by a cardboard rim.

• To make it, it is necessary to cut two strips 4 cm wide along the sheet.

• After that, they need to be wrapped around the child's head and fixed with paper clips.
• The workpiece can be removed and cut off the protruding end so that 3-4 cm remain before the staples.

• Now the ends of the rim must be glued and the paper clips removed.

1. After the bezel is assembled, you can start searching for pictures via the Internet. Here, as they say, "the taste and color ...". Lots of options. You can find both whole squirrels and their faces separately. If the mask is made together with the child, then it is better to look at the options that will be easier to cut. For example, something like this:

1. Now the found picture must be printed, and then glued to the rim.

The result is a pretty good and simple squirrel mask. But masks made in this way are considered disposable.

Varieties of masks

There are also complicated versions of the rim mask. For example, for greater strength, the image of a squirrel before gluing to the rim can be further strengthened with a layer of cardboard. A glue stick will help to glue them together, which will give a reliable grip and will not damage the printed image.

In addition to the pattern, you can improve the design of the rim. It can be made somewhat shorter than the girth of the child's head, and a wide elastic band can be sewn into the resulting gap. This will allow you to adjust the size of the rim, which means that such a New Year's mask can be used more than once.

A hair hoop helps to quickly tidy up your hair and keep it for a long time in any conditions, whether it's a noisy party, pleasantly tiring shopping, a sun-exhausting beach or a working day.

Hoops are different - barely noticeable and voluminous, modest and spectacular, but even a novice needlewoman can make almost any headband with her own hands. For some, this direction has become not only a separate hobby, but has also grown into income. A lot of techniques are used in creating hair bands with their own hands, so every woman will be able to choose an already familiar type of needlework.

What can you make a hair band from?

To make an even and beautiful hairband with your own hands, it is better to take a ready-made accessory as a basis, which you can buy for a penny in an inexpensive store. Of course, you should not take a very fragile product, otherwise all the work will be wasted. Let the hoop be unattractive, but durable, preferably made of metal.

Most often, the basis in master classes is recommended to tie, decorate with ribbons, fabric, threads or other materials. However, some types of decor involve attaching elements directly to the base. This must be taken into account when choosing an accessory, and even better - read in the MK which hoop is required for work.

What to take to decorate the rim

Almost all types of needlework can be used to decorate a hairband. Today, floral trends are especially in fashion. Flowers can be bought ready-made or made by hand using materials:

flowers from plastic suede look like alive, working with this material is easy and pleasant. luxurious!

Every girl is characterized by changes in her image. Having changed the color of the hair, you will have to pick up a bunch of accessories for the hairstyle again, since not all the previous ones will work. However, you can make a new note in a less expensive way. It is enough just to update an old product, for example, a bezel, and needlework techniques will help you with this.
For the transformation of my old headband, I needed. Three colors of satin ribbons, 5 centimeters wide, a candle, superglue, scissors, beads of two colors, accessories for jewelry - a rosette, a thread and a needle for beads.

First, you need to prepare the material, for this I cut the ribbons into squares of 5 centimeters.

So that during operation, the tapes do not crumble, their edges must be melted on fire.

The next step, I began to fold the green segments into sharp kanzashi petals, for this we fold the square into a regular triangle.

Then, the resulting triangle is bent in half.

Now we connect together its two lower corners, and, having drawn such a markup, we cut off everything below. the cut corners are well melted over the candle and squeezed with your fingers so that the edges do not separate.

The bottom edge only needs to be scorched to prevent shedding.

A neat hole should remain on the finished petal at the bottom.

Using this technology, we make all the remaining petals from a green ribbon - these are leaves. My project took 10 of these leaves.
Now let's make flower petals. Making them is not much more difficult, because the same sharp kanzashi petal is the basis. The main difference between the petals of a flower and its leaves is the number of triangles.

It took me 12 squares of pink and beige. The meaning is the same, only before connecting the corners you need to impose one triangle on the other.

Now you can form a petal by connecting the corners and singeing the edges, giving it a finished look.

All important details are ready.

The next step is to prepare the surface on which we will attach our flower. To do this, we need a piece of cardboard, a piece of tape and glue.

Cut out a strip of cardboard that will be slightly wider than the rim. Now carefully glue it with the prepared tape and singe the extra edges.

Well, you can proceed to the main part of the process - to collect a flower. To do this, apply a drop of glue at the edges of the petals and glue them like this.

For most parents, children are involved in theater groups, participate in school performances, or perform in kindergarten on holidays. And in any of these cases, a wreath on the head may be required as an additional accessory for the costume. We offer a small master class on making a paper flower wreath. You can make it pretty quickly with your own hands. A safe, lightweight floral wreath that will grace a child's head for any occasion.

A wreath of paper on a child’s head of red and blue flowers will look no less beautiful, and making such a wreath will not be difficult. This craft is perfect for an elementary school classroom.