home › Horoscopes › The iron sticks than to clean it. How to clean an iron with different coatings from burnt fabric at home? Simple and inexpensive means of cleaning your iron

The iron sticks than to clean it. How to clean an iron with different coatings from burnt fabric at home? Simple and inexpensive means of cleaning your iron

It is an indispensable assistant for anyone who wants to look neat and pleasant to others. The neatness of your appearance directly depends on the quality of your iron and how often you clean it of dirt. We will tell you how to clean your iron at home.

After reading this article, you will understand that cleaning your iron is not difficult, requiring minimal effort on your part.

From this article you will learn:

how to clean the soleplate of an iron at home;
how to clean a ceramic coated iron;
how to clean a Teflon iron;
how to clean an iron from burnt fabric;
how to descale an iron at home;
how to clean a steam iron from scale.

Everyone will agree that clothes ruined by a dirty iron are an unpleasant surprise at the moment when you need to quickly iron something and quickly run errands. And in general, clothes damaged by an iron are always a nuisance.

How many times have you been upset when a recently purchased iron suddenly began to “chew” the fabric of your favorite item? After all, some shirts and blouses are made of very fancy fabrics, and such troubles with the iron can lead to throwing your favorite item in the trash.

Do you want to forget once and for all about problems with ironing and the long search for products to clean the surface of the iron? Then read the article carefully.

The coatings of irons, that is, their soles, are made of iron, Teflon or ceramics. These materials are very durable and easy to use.

How to clean an iron from burning at home?

Let's consider the first method. In order to clean the soleplate of the iron from carbon deposits using peroxide, you will need ordinary hydrogen peroxide, which can be bought at any pharmacy, and a cotton pad.

Soak a cotton pad in hydrogen peroxide until the cotton pad is completely wet. Wipe the soleplate of the iron. With each movement, the carbon deposits will disappear.

This method is easy to use and does not require large expenses.

You will find the answer to this question by reading the following method for cleaning your iron.

Cleaning the iron with citric acid is also not particularly difficult. In order to descale the iron with citric acid, you need to dilute a 10 g packet of citric acid in a glass of boiled water.

Next, you need to pour the resulting solution into the iron’s reservoir. Activate the steam boost mode by setting the iron to full power.

This cleaning should continue until all the water in the tank is gone. Citric acid will steam off the scale, after which all dirt will disappear.

How to clean a steam iron from scale?

Steam irons made in our time have the property of self-cleaning.

In order to clean the steam iron from scale, you need to turn it on at full power, having first filled the water tank with the maximum amount of liquid.

Next, the iron will begin to heat up until it reaches the maximum heat mark, after which it will turn off. You must wait until the iron turns off for the second time, after which you should unplug the electrical appliance from the outlet, and then press the button located on the iron body.

This button is provided to clean the device.

Prepare a container in advance so that the steam and dirt that will come out of the iron after pressing the clean button do not stain you.

During this cleaning process, the device must be shaken vigorously so that the scale leaves the iron faster. Upon completion of this procedure, it is necessary to wash the soleplate of the iron and rinse the container.

The method of cleaning an iron using salt will help you understand how to clean the soleplate of your iron from carbon deposits quickly and without unnecessary worries.

In order to clean the iron with salt, you need finely ground salt and clean paper (you should not use newspaper, as printing ink may remain on the sole of the iron during the cleaning process).

Pour salt onto clean paper and heat the iron. Run the iron over the salt coating as if you were ironing. Hot salt will clean the soleplate of your iron quickly and efficiently.

Cleaning with soap

If the stain on the soleplate of the iron is still quite fresh, then the fourth method for removing dirt from the iron is suitable for cleaning.

You will need soap (laundry soap is best) and water. Heat the iron, then gently rub the soleplate with soap. You need to wait until the iron cools down, after which the dirt can be easily washed off using a wet cloth.

The cleaned surface of the iron will pleasantly please you.

Cleaning the soleplate of the iron with a chemical pencil is the easiest way to remove burnt stains from the surface of the soleplate of the iron.

Just heat up the iron, after which you need to press the cleaning pencil directly to the sole of the iron and anoint the dirty spots on the sole. After you notice that the product has corroded the dirt, you need to wipe the iron on a lint-free cloth.

This cleaning method is suitable when you have time to go to the hardware store to buy this pencil.

How to clean an iron from carbon deposits?

If you don’t have a cleaning product such as a chemical pencil on hand, then you can also clean the iron from carbon deposits using toothpaste, which, of course, everyone has.

It is necessary to apply toothpaste to the soleplate of the iron, after heating the appliance. A few minutes after applying the toothpaste, remove any remaining toothpaste by ironing the unwanted fabric.

Cleansing with vinegar

Clean the iron without heating. Cold cleaning of the iron can be done using vinegar. To do this, moisten a cotton swab with vinegar and wipe the stained areas.

Carbon deposits from the soleplate of the iron can be easily removed in a matter of minutes. The iron must remain turned off!

Using a matchbox

Using the side of the matchbox where the sulfur strip is located, wipe the stained areas on the iron. In this case, the iron must be heated.

The last method, but not at all effective. A reliable method of removing burnt fabric from the surface of the iron sole using a paraffin candle will help you solve your problem.

Wrap a paraffin candle in a cloth (cotton is best), spread the resulting “sausage” on a hot iron in those places where you need to remove dirt.

Melting paraffin will do the job perfectly.

How to clean a ceramic iron?

Everyone knows that ceramics are an expensive material that requires attention, but cleaning a ceramic-coated iron is not as difficult as it seems. There are several ways to clean the ceramic soleplate of your iron at no extra cost.

One of these methods is cleaning with soda. It is necessary to mix soda with water in a ratio of 1:20. Next, wipe the surface of the iron with a soft cloth. A ceramic iron can also be cleaned using citric acid, toilet soap and hydrogen peroxide.

How to clean a Teflon coated iron? The answer is simple. You can clean a Teflon iron using the same methods that are used to clean other types of irons.

In order to remove a burnt piece of synthetic fabric from the surface of the iron, you just need to heat the iron, then scrape the melted fabric off the iron using something not sharp, a scraper will do.

Want to know how to descale your Philips iron? The fact is that the irons of this company have a special container built into them that collects scale. In order to descale your Philips iron, you need to remove the container by pressing the release button located on the back of the iron.

Having taken out the container, rinse it and dry it, wipe off any scale particles with a damp cloth, after which the container will be ready for use again.

The modern Tefal iron is an iron with . In order to clean a Tefal iron, you need to fill the water tank with mineral water, as it removes scale perfectly, then turn on the iron at full power.

After the water has completely evaporated, the procedure must be repeated, only with ordinary water. You can also clean with citric acid, but I usually clean with mineral water.

So, you have become acquainted with the main effective ways to clean the soleplate of an iron from stuck fabric and burning. We learned how to clean the ceramic sole of an iron, how to clean the iron from burnt marks on the sole, and how to clean the inside of this household appliance.

Regular cleaning of the iron will protect your electrical appliance from burning. Now you won't be afraid of holes in your favorite clothes caused by ironing with a dirty iron, since now your iron will always shine clean.

5 minutes to read. Published 07/03/2018

A high-quality, properly functioning iron requires virtually no maintenance. Problems arise when used incorrectly. Failure to comply with the temperature regime can lead to melting of the material and the formation of a hard coating on the sole, which makes further use of the household assistant impossible.

Dark spots on the sole are particles of material that were ironed with too hot a household helper. This problem can be dealt with, you just need to figure out how to clean the soleplate of the iron from burnt fabric.

If melted material has damaged the soleplate of a steel iron, the hard layer should be scraped off with a knife and then proceed with standard cleaning.

Cleaning pencil

A special cleaning product can be purchased from a nearby supermarket. Its use is intuitive, but it is worth familiarizing yourself with the manufacturer's recommendations. Typically, cleansing is carried out according to the following scheme:

Heat the iron to the specified temperature. Most often it is recommended to set the switch to the middle division.

Remove the pencil from the packaging and gently rub the sole with it.
Upon contact, the product will begin to melt and flow off along with the dirt.
Remains of burnt fabric should be removed using a dry rag.

You should work with such pencils with caution, because the main active ingredient is acid. When melted, the composition begins to smell very strongly, and if it gets on the skin it will leave painful burns.

The pencil can be used to clean irons with aluminum, ceramic, Teflon and steel soleplates, unless otherwise specified by the manufacturer.

Cleansing with salt

One of the most effective sole cleaners can be found on the shelf in every home. This is ordinary table salt. It can be used in several ways.

Pour salt, about 1/2 cup, onto thick paper and even out the layer. Heat the iron to maximum temperature. “Iron” the nutritional supplement until the stains disappear.
Wrap a handful of salt in a loose natural fabric; a handkerchief will do. Warm up the equipment and use the resulting bag to carefully remove dirt.

Before you begin manipulations or look for the answer to the question of how to clean the iron from burnt fabric, it is worth remembering what type of soleplate the home assistant has. Teflon-coated units cannot be cleaned with salt or any other abrasive compound.

Paraffin candle

An ordinary candle will help to effectively clean the iron. It can easily cope with light stains and help remove plaque of any origin.

The candle should be wrapped in thick cotton cloth. This will be the pencil that
. The iron must be heated, then gently run the candle along the sole. The handmade pencil will begin to melt and paraffin, flowing down the sole, will remove dirt.

When manipulating, you should maintain a slight angle of inclination so that the cleaning composition flows onto a previously prepared rag. After work, the sole should be cleaned with a hard, damp cloth.

If the unit is equipped with a “steam” function, it is necessary to clean the holes on the soleplate. To do this, pour water into the tank and use the steam boost several times. This will avoid the appearance of greasy wax stains on clothes that will be ironed in the future.

Vinegar, ammonia and hydrogen peroxide

Liquids widely used in everyday life will help deal with mild and relatively fresh stains. Therefore, if the fabric is burnt, you should find out what to do immediately.

Vinegar can be used in several ways:

Soak a cloth in vinegar and gently rub the warm surface. This method is suitable for removing fresh, weak plaque.
If the remains of the burnt fabric have frozen, you should generously moisten the cloth and place the contaminated equipment on it overnight. The acidic liquid will cause the dirt to peel off and soften so that it can be easily removed with a dry, stiff cloth.

You can use a citric acid solution in a similar way. To prepare it, 2-3 packets of the dietary supplement should be dissolved in 1-1.5 glasses of warm water.

Hydrogen peroxide and pungent-smelling ammonia are used in the same way: applied to a rag and wiped the contaminated area. When working, you should be vigilant; ammonia should not be applied to a hot iron; manipulations should only be carried out after it has cooled completely.

Soda and hydroperite tablets

Baking soda is one of the most versatile and frequently used cleaning products. With its help you can remove almost any contaminant. But only from surfaces that are not afraid of contact with abrasives.

To clean the iron, you should prepare a paste of water and soda. Apply it to the surface and gently rub the stains. Finally, wipe the sole with a damp cloth.

Hydroperite tablets can be used as a cleaning pencil. Heat the iron and use an uncrushed tablet to remove carbon deposits. Remove any remaining product with a damp cloth. The main thing is to carry out manipulations in a well-ventilated area, otherwise the pungent specific smell will linger in the house for a long time.

Cleaning the Teflon sole

Teflon coated irons are comfortable and multifunctional. And with their help you can smooth out absolutely any fabric. But problems can arise with such a modern device.

And it’s better to find out in advance how to clean a Teflon iron from burnt fabric, so that the annoying incident doesn’t take you by surprise:

To clean surfaces of this type, it is better to use special pencils or sponges. And act in accordance with the manufacturer's recommendations.
An alternative is to clean with vinegar essence. When working with a caustic liquid, you should wear gloves and exercise extreme caution - if it comes into contact with skin and mucous membranes, it can cause burns.
A small cloth must be moistened and the sole thoroughly wiped. If this is not enough, you can soak a piece of cotton fabric in the essence and iron it with a heated iron. Usually this cleaning is enough.

To avoid such troubles again, you should follow the rules for caring for irons. And don’t forget about the importance of choosing the right temperature when ironing absolutely any wardrobe item.

The choice of cleaning product for your iron depends on the material from which the soleplate is made. At home, you can clean all surfaces from burnt fabric. However, you should apply folk advice carefully and carefully so that you don’t have to run to the store for a new electrical appliance.

Precautionary measures

Teflon, ceramic or stainless steel coatings cannot be cleaned with a knife, sandpaper or abrasives. Any scratches, even the smallest ones, will cause more severe burning of the fabric and will completely damage the iron. Salt is also not recommended for treating soles. With constant use, it will damage even a steel surface.

The best folk remedies for cleaning carbon deposits

For each type of coating, a specific product is effective. The most suitable methods for cleaning burnt fabric are shown in the table below.

Paraffin

Using a paraffin candle and a cotton cloth, you can clean your iron at home. This method will also help remove scratches.

Instructions: wrap the candle in cloth and rub it against a hot sole until the melted paraffin removes the burnt fabric. Use the method carefully, as the hot mass can burn your hands and get into the holes in the sole.

If paraffin flows inside, you can remove it by ironing a white sheet or unnecessary fabric in the “steam” mode.

Toothpaste and soda

Toothpaste will clean almost any surface from carbon deposits, as well as the sole of a sneaker. Please note that the abrasive substances contained in the composition harm the sole with constant use.

Instructions: Apply toothpaste to a heated iron and rub with a brush. Rinse and wipe dry with a cloth. The holes are cleaned using cotton swabs.

Another effective method that is used with caution is baking soda.

Instructions: Apply a mixture of soda and water to the cooled surface. After 20 minutes, gently clean with a soft cloth.

Toothpaste and soda will remove even old carbon deposits and stuck lint. However, it will inevitably lead to scratches and microcracks. They are used only as a last resort, if other home recipes have not helped get rid of the problem.

Vinegar

Use vinegar only in a well-ventilated room with open windows because the harmful fumes can cause discomfort and poisoning.

Mix water and vinegar in a 1:1 ratio. Soak a soft cloth in the solution and wipe the heated iron. A warm sole is enough to avoid burning your hands.
For a ceramic surface, pour a few drops of hydrogen peroxide into the liquid. This will return the shine to the material and whiten it.
A mixture based on vinegar with lemon juice and ammonia will not leave a trace of burning. Wipe the surface of the iron with a cloth or cotton pad in the solution.

Don't forget about the holes in the sole, which can be easily cleaned with cotton swabs. At home, instead of cotton swabs, use toothpicks dipped in vinegar.

Hydrogen peroxide

A hydrogen peroxide solution will cope with minor stains. A cotton pad or cotton ball soaked in the solution will clean the surface. For more persistent deposits, peroxide in solid form - hydroperite - is suitable.

Instructions: wipe the surface of the iron with a hydroperite tablet. After the material has cooled, remove the residue with a damp cloth and wipe dry.

Hydroperite tablets are used in well-ventilated areas on an iron preheated to maximum temperature.

Soap

An effective way to remove fresh burns. Not suitable for old stains.

Rub the warm surface with soap and leave until cold. Then remove the dirt with a damp cloth.
Soak a cloth in soapy water and iron it. Clean holes in the sole contaminated with carbon deposits with a wooden stick.

After cleaning with soap, be sure to iron the wet gauze so that there are no streaks left.

Video instructions

Iron cleaning pencil

When purchasing, pay attention to what surface the pencil is intended for. Pencils or crayons are sold for any type of sole.

Instructions: warm up the device to the temperature indicated on the pencil. Then clean off the dirt and wipe with a cotton rag.

When cleaning, do not press the pencil with force, otherwise it will crumble and fall into the holes of the device.

Features of cleaning soles made of Teflon, ceramics, steel

Teflon coating

Teflon has non-stick properties, so this coating is easier to clean than others.

The method is effective if applied immediately as soon as the fibers melt or plaque forms. To remove burnt fabric from the iron, wet a piece of cotton cloth and apply it to the burnt area. Due to temperature changes, the burnt material will begin to peel off.
A special device for removing carbon deposits is sold - a Teflon scraper. If you don't have one, a regular wooden spatula will do. First, heat the appliance to maximum temperature, then carefully, without letting the spatula heat up, remove the burnt fabric.
Ammonia is used to clean the iron in its pure form or in a 50/50 ratio with vinegar. Use only in well-ventilated areas. For application to a contaminated surface, a cotton pad or thick cotton cloth is suitable. Before use, warm up the iron until it is warm enough to touch with your hand.

Cleaning the iron with a special pencil after each use will prevent the appearance of carbon deposits. Manufacturers recommend wiping the surface with a dry cotton cloth.

Ceramic coating

The ceramic surface is fragile. Long-term use of an iron with such a sole leads to the formation of microcracks in the material, which is why fabrics may burn. To protect yourself, treat your electrical appliance with care and avoid shocks and scratches.

Cleaning products for glass ceramics or microwave ovens are also suitable for cleaning irons. Instructions: soak a dishwashing sponge in the product, rub the sole, pour the liquid onto the bag and place a cold appliance on it. After 30 minutes, wipe off any residue with a sponge to prevent chemicals from getting into the iron's holes.

After cleaning with liquid products, be sure to let the device dry and do not turn it on for 2 hours.

Steel sole

For cleaning stainless steel, harsher methods are suitable than for ceramics or Teflon.

A matchbox will help remove carbon deposits from the surface of the iron. Instructions: preheat the device, then clean the dirt with a sulfur strip. The main thing is not to overdo it and not to scratch the metal.

After using this method, wipe the sole with a soft cloth to remove excess wax. If dirt gets into the holes, remove it with cotton swabs.

How to clean an iron from burnt fabric at home? — The trouble that leads to such a problem has probably happened to almost every housewife in the process of ironing clothes. If you set the temperature of an electrical appliance incorrectly, your favorite blouse will be irrevocably damaged, and a dark coating will form on the sole of the iron. A burnt iron can be easily cleaned. You will find the answer to the question of how to clean the iron from stuck fabric in our article. Using useful tips, you won't have to change your technique very often.

Types of iron coatings

Before you clean the iron from burnt fabric at home, you should figure out what material the sole of the affected device is made of. Modern manufacturers produce irons with Teflon and ceramic coatings, with soles made of stainless steel or aluminum. Due to such a variety of coatings, some of them require more delicate cleaning.

Aluminum sole

Irons with such soles are the most difficult in the process of removing burnt marks. This surface is prone to small scratches. This often causes fabrics to deteriorate and stick to the coating.

Stainless steel sole

This material is quite unpretentious - in the absence of other suitable means, it can even be cleaned with a sharp object, for example, a blade or knife. But it’s still better to choose other methods to clean the iron from burnt fabric at home, so that you don’t have to regularly sand and restore the surface from burning.

Ceramic sole

A very common base in devices. The surface must be cleaned carefully, using products that do not contain abrasive substances. During the cleaning process, avoid the use of brushes and hard sponges.

Teflon sole

This coating is a durable and durable surface. But the process of cleaning it takes a lot of time and effort. For such a surface, it is better to use special iron pencils if it is burnt.

More detailed tips on choosing an iron will definitely be useful to you if you are planning to purchase more convenient and functional equipment. Hurry up to take advantage of useful information!

How to clean an iron at home from stuck fabric?

If fabric sticks to the soleplate of the iron during ironing, you can clean it in several ways. Let's look at the main ones.

Cleaning pencil

With the question of how to clean a burnt iron, many people turn to a household goods store. And for good reason. On its shelves you can find a special product that is produced specifically for cleaning electrical appliances from burnt-on matter.

The cost of a cleaning pencil is minimal, but it removes dirt without much effort on your part. Another advantage of this product should be noted that it can be used on absolutely any surface of the iron sole. Of course, unless the manufacturer indicates otherwise in the instructions.

Important! Before use, be sure to read the instructions for the product.

Mode of application:

Preheat the electrical appliance to the temperature specified in the instructions.
Remove the packaging from the pencil and lightly rub the contaminated surface.
When applied to a heated surface, the pencil melts and flows off along with the burnt particles.
Remove any remaining dirt using a dry, clean cloth.

Important! When using a cleaning pencil, follow safety rules. When a pencil comes into contact with a hot surface, an acid is released, which has a pungent odor. After use, be sure to ventilate the room. Burns may occur if molten product comes into contact with the skin.

Salt

Want to know how to clean a burnt iron at home? The following effective remedy for removing burnt marks from the coating of an iron is always available on the kitchen shelf in every home. Using salt, you can very quickly remove dirt from the device and continue ironing your clothes.

Important! To clean a device with a Teflon coating, you should look for another method, because such a coating cannot be cleaned with abrasives.

Mode of application:

Prepare a thick sheet of paper.
Sprinkle half a glass of table salt on it.
Preheat the electrical appliance to maximum temperature.
Iron the sprinkled salt and do this until the dirt disappears.

Important! You can try wrapping the salt in a handkerchief and using the resulting bag to wipe off the dirt.

Equipment needs proper care not only on the outside. Therefore, be sure to take advantage of the tips that will help you without extra costs!

Paraffin candle

A paraffin candle will help solve the unpleasant situation when the iron is burnt. How to clean the surface of the device using it is described in detail below.

This method is very popular among experienced housewives. A paraffin candle removes burnt fabric from the coating as well as a special cleaning pencil. If your electricity is often turned off, then you will definitely find candles in the house. If you don’t have them, you’ll have to spend a little to purchase them at a hardware store. When using candles, recent dirt of any origin can be easily cleaned.

Mode of application:

Wrap the candle in a clean cotton cloth. This way you will get a pencil from carbon deposits.
Heat the iron to maximum temperature and lightly run the pencil over the iron's surface.
Place a clean cloth under the surface of the electrical appliance.
When the pencil melts, flowing down the base of the device, the dirt will disappear in an instant.

Important! When cleaning, hold the iron at an angle so that the paraffin flows down.

Finally, wipe the cleaned soleplate of the iron with a hard, damp cloth.

Important! Do not use too much force when using a rag to avoid scratching the coating.

If your iron has a steam function, clean the holes on the bottom of the iron.
Pour water into the special compartment and pass the steam several times. This removes wax residue from the iron and prevents stains from appearing on clothes during the next ironing process.

Table vinegar

Surely every kitchen has table vinegar. This liquid will help solve the question: how to clean the iron from burnt synthetics. Vinegar will perfectly remove light, fresh stains on the ceramic, Teflon and metal surfaces of an electric iron.

Important! When processing, make sure that liquid does not get on the body.

There are many recipes for preparing a cleaning mixture. We offer the fastest cooking options.

Important! If for some reason you don’t have vinegar, you can use citric acid in similar ways.

Method number 1:

Wait until the surface of the device becomes warm.
Prepare a solution by adding 1-2 tablespoons of vinegar to one glass of water.
Soak a soft, clean rag in the solution and wipe the iron.
Fresh marks that have just appeared are cleared in an instant.

Method number 2:

Wet a rag generously with vinegar.
Place a warm iron on it and leave it in this position overnight. The vinegar will soften and help peel off burnt tissue.
Remove any remaining dirt in the morning using a dry, thick cloth.
In this way, stubborn old stains can be easily removed from the surface of the electrical appliance.

Toothpaste

Are you tired of wondering how to remove stuck fabric from your iron on a steel soleplate? In this case, use toothpaste. The process of removing burnt marks should be started immediately, otherwise cleaning will require much more time and effort.

Mode of application:

Use a sharp object to cut off any remaining burnt marks.
Apply toothpaste to the dirty area.
Use the rough side of a dish sponge to wipe away any remaining residue.

Hydrogen peroxide or ammonia

Don't know how to clean the iron from burnt fabric? Look in your medicine cabinet for peroxide or ammonia. These medical liquids will very effectively clean the surface of the electric iron from adhering fabric.

Important! The principle of cleaning the sole from contamination with peroxide or ammonia is the same, so the recipe for preparing the solution is suitable for both one and the other component.

Cleaning method:

Wait until the appliance has cooled down completely.
Apply your chosen liquid to a clean rag.

Important! The fumes released by ammonia are harmful to health. Therefore, carry out processing in a well-ventilated area.

Wipe any damaged areas of the device.

Soda

Soda can be considered the most popular product in household life. It must be kept in every housewife's closet. Soda can not only perfectly clean kitchen utensils or remove stains on carpet and linoleum. It is the basis of another surefire way to clean a burnt iron at home.

Baking soda will help get rid of old burnt stains.

Important! It is not recommended to use baking soda powder on surfaces that react negatively to abrasives. It is best used on metal surfaces. If you have a more modern model, but the same trouble happened to it, then you better read about it right away.

Mode of application:

Add baking soda to warm water and mix thoroughly.
Bring the solution to a paste.
Apply the resulting mixture to the contaminated surface.
Using gentle movements, use a dry rag to wipe away the stains.
Finally, use a damp cloth to remove any remaining product.

Nail polish remover

Use this product to clean the surface of the device very carefully so as not to damage the surface.

Important! You can use nail polish remover to remove stuck polyethylene from your iron.

Mode of application:

Moisten a cotton swab with a small amount of liquid.
Wipe the contaminated area.
Wash off any remaining product with a damp cloth.

Hydroperite tablets

At the pharmacy kiosk you can buy hydroperite in the form of tablets. How to remove stuck fabric from an iron using hydroperite tablets? You can use this product exactly like a cleaning pencil.

Mode of application:

Heat the iron to maximum temperature.
Wipe the contaminated area with the whole tablet.
Remove any remaining tablets with a damp cloth.

Important! The vapors emitted by the tablets have a pungent and pungent odor. Therefore, handle the iron in a well-ventilated area.

How to clean a Teflon coated iron?

Teflon-coated electric irons are the best-selling product of this type in household appliance stores. They are usually multifunctional and can smooth out any fabric. But an incorrectly selected iron temperature often leads to the appearance of burnt clothing residues on the sole. How to clean an iron from burnt fabric at home, so as not to damage the coating and spoil the equipment?

Cleaning method:

The best option for removing burnt tissue on Teflon surfaces is a pencil or sponge.

Important! It is worth using such products strictly following the instructions on the product packaging.

If you do not have a cleaning pencil, replace it with vinegar essence:
- Moisten a clean cloth with the product and thoroughly treat the coating.
- Difficult stains can be cleaned by ironing a cloth soaked in the product.

Important! When using vinegar essence, follow safety precautions. Wear gloves to protect your hands. Be careful not to get into eyes as the liquid may cause burns.

How to clean an iron at home from burnt fabric? — Useful tips:

For cleaning, you can use cotton swabs soaked in the selected product. Wrap cotton wool around a toothpick to remove dirt from the holes through which the steam escapes.
After each ironing, wipe the soleplate of the appliance with vinegar or another suitable product.

Important! Cleaning powders leave invisible scratches on the soleplate of the electric iron. Subsequently, after such cleaning, the burn will appear more often.

Woolen and synthetic items should be ironed through gauze or cotton cloth.
Do not use sharp objects or sandpaper to remove burn marks to prevent scratches. If you still use it on a stainless steel sole, periodically polish the surface with melted wax so as not to damage the fabric.

Save yourself from unnecessary problems with carbon deposits by reading and remembering all the rules for handling different fabrics.

In order to avoid the problem of burnt fabric on the sole of the iron in the future, set the correct temperature on the device. If you doubt the composition of the fabric, start ironing at a low temperature, increasing it if necessary. In cases where the surface does become dirty, you already know how to clean the iron from stuck fabric using simple ones.

The soleplate of the iron, no matter what it is, can sooner or later get dirty. In this case, the ironing process will have to be suspended, and this may be extremely undesirable. Therefore, every housewife needs to have an idea of how to clean a temporarily broken iron.

Special means

To clean the iron at home, special products are available in the form of a pencil. To clean the surface of the sole, simply apply the product evenly and carefully onto the preheated sole, then wipe it with a soft cloth.

If you don’t have a special product at hand, you can use long-proven, so-called “folk” cleaning methods.

Traditional recipes for cleaning an iron

Sprinkle a thin layer of fine table salt onto a sheet of paper, heat the iron and move the soleplate over the salt until the dirt is removed. Remove any remaining salt by wiping it off with a cloth. You can enhance the effect by adding finely grated or crushed paraffin to the salt. This method should not be used on a Teflon coated iron.
If rust stains have formed on the iron due to scale, sprinkle them with salt and then wipe with a cloth. A rusty coating may appear on the surface of the iron as a result of using hard water. To remove it, take cotton wool or a cloth soaked in vinegar and clean the iron with it. Heavy deposits can be eliminated by adding ammonia to the vinegar. This product should only be used on cold soles.
If synthetic fabric is stuck to the soleplate of the iron, heat the iron to maximum temperature and wait until the synthetic fibers are completely melted. Then clean the non-stick coated soleplate with a wooden spatula, carefully scraping off any remaining synthetic material. After this, iron the terry rags with an iron.
To get rid of stains left after removing burnt synthetic fabric, you can use a paste made from water and regular baking soda. Water can be replaced with detergent. Apply the paste to a rag and rub it over the cold soleplate of the iron. Wipe off any remaining residue with a damp cloth, then wipe with a dry one. To remove dirty deposits, roll up the gauze in several layers, soak it in ammonia and then iron it with a warm iron.
You can use hydrogen peroxide to clean your iron. Take 3% hydrogen peroxide, soak a swab or cotton swab in it and wipe the soleplate of the iron. There is a more radical method: heat the iron to maximum and walk along its sole with a hydroperite tablet. Keep in mind that this procedure will have a very strong odor, so only use this method in a well-ventilated area. When finished, remove loose dirt and remaining hydroperite with a damp cloth. Then wipe the soleplate of the iron dry.
Under no circumstances should you clean the iron with a knife, steel wool, abrasives, or the like. These products may damage the sole. You can remove dirt from a Teflon-coated iron using a nylon sponge. The iron must cool completely before doing this.
If you want to clean the iron immediately after burning, then while it is hot, rub it with laundry soap. After the iron has cooled, wipe off the soap with a damp sponge. The dirt will come off along with the soap.