home › Horoscopes › Patterns for cross stitching a rug. Simple crochet embroidery

Patterns for cross stitching a rug. Simple crochet embroidery

Embroidery using carpet technique has its own characteristics, since it is not at all similar to other types of embroidery. The finished products are distinguished by their softness and similarity to a real carpet. Used to create pillows, blankets, paintings, bedspreads, toys. Today we will look at carpet needle embroidery and describe the methods and technology for creating the work.

Embroidery Features

The embroidery in question has several varieties and methods.

Embroidery and coloring books. Embroidery involves attaching short threads to a mesh base.
The next type differs in that a special hook is used in the work. The main difference from other types is that you can embroider with a needle and crochet. Embroidery is characterized by fastening the threads on the front side, which creates a fleecy pattern. The basis for embroidery can be mesh or burlap. It is often used to create paintings and panels or small rugs with a simple pattern.
Making tapestries. It is widely believed that creating tapestry paintings is very difficult process. We hasten to please our needlewomen, this technique is comparable in complexity to ordinary cross stitch. True, the technique of tapestry embroidery has its own characteristics.

The work uses a special needle. We can say that this is a tube whose ear has a bevel. Thanks to the presence of a special lock on the needle, the loops of thread are the same length and thereby form a uniform pattern. Like any type of embroidery, this kind of embroidery is quite a painstaking task.

It is worth remembering that during the embroidery process the needle must pierce the fabric, so for convenience it is recommended to use a frame or fingers.

The work must be done on a tight basis. It can be used as a grid, the cells of which are not too large. You can use a base made of thread.

Pick up the necessary diagram Quite simple to work with. You can search on the Internet or go to a store. In the latter you can purchase a kit that contains everything you need for work. But you can draw the diagrams yourself, transfer them to the embroidery base and fill them with colored threads to your liking.

Embroidering correctly

For embroidery, it is possible to use leftover yarn or thread that the needlewoman has left over from other projects.

Work is performed on wrong side base, and on the front you will get loops with pile. Therefore, to facilitate the process, it is recommended to make color markings before starting work.

The base must be very well secured and tensioned, since when piercing with a needle, the tightness of the tension is important.

The embroidery process must begin by “drawing” the outline of the image. Then you can fill in the space in the outline, do small details and you can start filling in the background. When working, hold the needle with the beveled edge up.

The seams in this technique are quite simple, their execution is accessible even to novice craftsmen. Each detail of the drawing is performed separately; it must be filled in moving from the edge to the middle.

To simplify the embroidery process, you need to move from right to left when working, and keep the needle in vertical position. This will help prevent the needle from damaging the loops and pulling them out. If done correctly and carefully, the pile will not need to be leveled.

Carpet painting

Here is a master class on tapestry embroidery. The process of creating such a painting is distinguished by the presence of a much larger number of colors in the work.

Most often the tapestry has big size, so it’s better to use frames in your work. It is recommended to wash the base before work and only then insert it into the frame to prevent the fabric from sagging.

After this, the design must be transferred to the fabric. In order not to confuse the threads when working, you need to make markings on the base indicating the thread number.

The stitches need to be done as tightly as possible to avoid gaps. To make the loops beautiful, the thread must be loose when embroidering. Length - approximately 2 meters.

When changing the color of the threads, the thread with same color you need to take it inside out and cut it, and thread it through a needle new color.

Periodically you need to check the pile on the front side; if individual fibers are too long, they can be corrected with tweezers, and if they are short, they need to be slightly tightened.

To prevent the finished work from unraveling, the seams must be secured. To do this, you need to treat the seams on the reverse side with simple office glue. The glue should be liquid, this will facilitate the processing process and the base will remain soft and can be bent. Let dry thoroughly. Then you need to iron it from the inside out.

All that remains is to trim the fibers on the front side with scissors and our tapestry is ready.

Video on the topic of the article

We invite you to watch several videos on carpet embroidery.

Not invented by craftswomen and craftsmen all over the world! Some of them are complex and require professional skills and special tools, while others are simple and accessible even to beginners. One of these simple, but very bright and expressive types is carpet embroidery. Not to be confused with carpet weaving!

Today, both venerable couturiers and home-grown needlewomen use carpet embroidery in their works. Having mastered this technique, you can make soft and cozy pillows, blankets, rugs, decorate clothes. In general, create unique, inimitable things.

Types of embroidery

Each of these techniques is easy to learn even for beginners. And the work is done quite quickly and in the evening you can create a small exclusive product that will become an interior decoration or a great gift for loved ones. There are two types of carpet embroidery, which will be discussed below.

Looping - performed using a special needle. On the front side of this work there will be even loops of yarn. And on the reverse side there will be smooth embroidery. Another name for this technique is “non-woven tapestry”.

Knotted - performed using a special or regular crochet hook. During the process, short pieces of thread are tied with knots to the base fabric.

Carpet embroidery

To work with this technique you will need a special needle; you cannot do without it. They are sold in handicraft stores. The set includes a handle, removable needles different diameters for different thread thicknesses and a thread puller. Needles for carpet embroidery are distinguished by the fact that their points are hollow and beveled at the bottom. The instructions describe how to thread correctly.

Work is performed on thick fabric. The thicker the needle, the denser the fabric, otherwise there will be unattractive holes in the fabric.

Any yarn will do, but in one project it is advisable to select threads of the same thickness and structure. In the process, you can use both specially purchased yarn and leftovers that knitters have in stock. You can also use threads obtained from unraveling woolen products, who have served their time. Waste-free technology.

A hoop, scissors, and a pencil will also come in handy. You can start creating a masterpiece.

Work process

This type of needlework, like carpet embroidery, is very suitable for beginners, because you can master it in just short term. Initially, you need to choose a drawing for work. You can draw the diagram yourself or choose a picture you like. It is important that there are no small parts on it, because they complicate the work process and are difficult to see finished product.

Draw a design on the wrong side of the fabric with a pencil, keeping in mind that the front side will have a mirror image.

Place the fabric in the hoop and stretch it well so that there is no sagging. It is advisable to choose a hoop size such that the entire picture fits.

A thread desired color thread the needle. When working, the fabric breaks through, the work is held with the wrong side up. You need to hold the needle strictly perpendicular to the surface, inserting the tool until it stops. The length of the pile is adjusted by a limiter on the handle and depends on the wishes of the master.

In carpet embroidery with a needle (information for beginners), it does not matter which side the work starts from. Insert the thread into the needle, leaving an end of at least 3 cm. It is important that first the outline of the selected fragment is made, which is best done contrasting color(black), and then the main color fills the space inside. You can make stitches along the contour, filling the fragment from the periphery to the center, or go through straight rows. The choice depends on the performer.

Then, with a gentle upward movement, the carpet embroidery needle is pulled out and rearranged 2-3 mm from the original puncture. You don't need to raise it too high, otherwise the loops will unravel or be uneven. Before you start, you need to practice on a small area of fabric. The front row rarely looks perfect, but that's no reason to panic. The result will be visible when a fragment of the drawing is completed.

Periodically you need to turn the work over to the front side for control. The finished loops are bent in the direction opposite to the needle so that they do not intertwine, which will make the work sloppy.

To change the colors of the yarn, just cut the thread of the used color, leaving a small tail, thread a new color into the needle and continue working.

The process is fun and quite fast, the video demonstrates this.

Craft kits

For those who want to try their hand at this type of needlework, you can buy kits for carpet embroidery. They include everything necessary materials, tools and detailed instructions, which greatly simplifies the process. The compilers of the set select the pattern, base and yarn the right colors and shades. And the tools from the set can be used in the future.

End of work

In carpet needle embroidery, it is important for beginning craftsmen to finish the work correctly so that the product retains its shape for a long time.

Remove the finished embroidery from the hoop. Carefully inspect the front side. If some loops turn out to be longer than the neighboring ones, you can carefully tuck them in with tweezers, picking them up from the reverse side. If the loops turn out to be shorter than others, then using a needle or hook you can slightly pull them up.

From the wrong side, trim off the excess threads, leaving 2 cm tails, which need to be secured by passing them under adjacent stitches.

Coat the wrong side of the work with PVA glue diluted in a 1:1 ratio. This should be done with a soft brush and so that the glue does not get on the front side. This technique will secure the yarn and prevent the loops from unraveling. If you do not dilute the glue, then after drying the work will be hard, and when bent the product will crunch.

Cover the work coated with glue with film and leave overnight. Then remove the cellophane, lay the product on a flat surface and leave until completely dry. This smoothes the surface well.

Iron the embroidery from the wrong side and glue it with non-woven fabric. You can go over the adhesive solution again. After such manipulations during operation of the product, nothing is scary anymore. All threads are securely fixed.

All that remains is to hem the lining, if it is a rug, if it is a pillowcase - the second wall, if it is a picture - insert it into the frame.

Little tricks

First, the small details of the drawing are completed, then the larger ones. The last step is to fill in the background.

The length of the loop can be changed during operation. This will create relief and volume. But the entire fragment must have the same loop height. For example, the grass at the foot of the mountains in the picture, or the ears of a puppy.

If there are missing loops in some areas, you can insert a thread into the needle and always come back and refine the gaps.

It is advisable to make a contour or straight lines in two parallel rows. This way they will look clearer and won’t get lost in the general background.

Crochet embroidery

Another type of needlework is carpet crochet embroidery. It is not difficult to make, but looks very impressive. It is used to make original rugs and other products.

Master class on carpet embroidery

To work you will need a special dense canvas with large cells, called stramine. This material is sold in craft stores and construction departments.

You also need a special hook, but if you don’t have one, you can get by with a regular crochet hook. To work, you need yarn, which needs to be cut into equal pieces. Their length depends on the desired length of the pile, from 3 to 10 cm. To simplify the task, it is recommended to wind the yarn onto a ruler the right size and cut on one side. So all the segments will be even. IN progress is underway any yarn available.

A master class on carpet embroidery will help you complete work of any level of complexity. But it's better to start with something simple.

The picture should not contain small details, they will complicate the work and will not be visible on the finished product. The canvas is divided into 10 x 10 squares to simplify the process. Apply the image to the front side. If you plan to use several colors, you can use a pencil or felt-tip pen to highlight these zones.

It is important to remember that you need to retreat 2-3 cm from the edge of the canvas in order to subsequently continue working with the workpiece.

In the knot technique, work begins with the lower or top corner, and the knots are tied sequentially into each cell, row by row.

Fold a piece of thread of the desired color in half. Pass the hook under the cell of the canvas, grab the thread at the bend point and pull it under the base. Thread both tails into the resulting loop and tighten the knot. Each knot must match the color of the selected pattern. When everything is ready, you need to trim the ends of the threads with sharp scissors so that the product takes on a finished look.

This is how simple and uncomplicated it turns out to be beautiful exclusive item.

Where to get the diagrams

Any designs can be used for carpet embroidery. You can draw a diagram yourself or use children's coloring books. Cross stitch patterns, where each cell corresponds to a loop or knot, are very suitable for this purpose. It is best to select pictures without small details.

Abstract ones look good geometric figures or simple patterns. Even the stripes look beautiful, because they gain volume and softness.

Carpet embroidery for beginners is an opportunity to spend time usefully, use thread trimmings and create unique thing which will become an interior decoration.

There are two main types of embroidery in carpet technology:

looped This is carpet embroidery using a special needle for carpet weaving, when a pattern is created from a series of loops based on the selected pattern. Thick fabric is used as the basis for carpet embroidery. This technique is also called “non-woven tapestry”;
nodular. A special hook for carpet equipment is used here. Vinyl canvas is used as the basis for knotted carpet embroidery. Knots of short threads are tied on the weaves of the warp, hence the name of the technique.

Now about each type of carpet technology in more detail.

Carpet technique: loop embroidery

Our grandmothers also used this technique of carpet embroidery. Huge carpets were embroidered in cold weather winter evenings. Then this technique remained forgotten a little, but now it is coming back to life again.

To work you will need:

thick fabric;
yarn. Absolutely any yarn will do, but it all depends on what patterns are chosen. It is advisable to take yarn of the same thickness and structure;
special needle for carpet embroidery;
pencil for drawing a design on fabric;
scissors.

Selecting and drawing a picture

You can choose any drawings or patterns for embroidery using carpet techniques that you like. Carpet embroidery will be done from the reverse side, so we will apply the contours of the design to it.

The fabric does not stretch much on the hoop, which it is advisable to choose in such a size that you can see the entire design. After the fabric is stretched, you can apply the design.

A special needle is the main working tool

The carpet pulling technique involves the use of a special needle for carpet embroidery. Its tip seems to be cut at an angle, and inside the needle and handle there is a hole where the thread will be pulled. The cut side will be the front side of the needle, and the straight side, on which there is an eyelet for the thread, will be the back side.

For beginners, it is better to use an automatic needle, where the length of the needle is adjusted and, accordingly, the loops will be the same. As a rule, the kit comes with three replacement needles to easily match different thicknesses of yarn.

During carpet embroidery, the needle is held strictly at the front or side in the direction of embroidery. But the direction of the embroidery itself has absolutely no meaning, the main thing is that the direction of movement of the needle is in the direction of the stitches.

Where does carpet embroidery begin?

After stretching the fabric onto the hoop and applying the design according to the chosen pattern, we begin embroidering.

It is very important to keep the needle perpendicular to the fabric. The thread that comes out of the upper hole in the needle handle should follow your hand so as not to get tangled and create knots.

After watching the video with the master class, you can understand exactly how to thread the needle through the fabric.

After this, the needle is carefully lifted above the surface of the fabric until its tip comes to the surface. We retreat just a couple of millimeters from the already finished stitch and thread the needle into the fabric again. Here it is important to strictly follow the chosen pattern and monitor the position of the needle (strictly perpendicular).

After 5-6 stitches, the protruding tip of the thread, from which the work began, can be carefully trimmed so that it does not interfere. But this must be done very carefully, otherwise all the embroidery will simply unravel.

As the work progresses, stitches will be formed on the side where the carpet embroidery is going on (the wrong side), and loops will be formed on the front side, which will create the pattern.

When the thread runs out or you need to change the color

The thread is running out, and its end is already hidden in the needle handle. In this case, you need to do the following:

make a few more stitches, then pull the thread out of the needle, pressing the last stitch tightly with your finger;
cut the thread very close to the fabric, but so that the stitch does not unravel;
secure the end of the thread with textile glue.

If you need to move to another section of embroidery, even one adjacent to it, you do not need to make a large stitch. We cut the thread and start a new section from the beginning.

Filling in areas of the picture

It is best to start embroidery with large elements, then move on to small details and other elements of carpet painting with threads.

We select one element, first embroider its outline with a needle stitch by stitch, and then we begin to gradually fill the entire area, like coloring pages. To do this, you can use a circular direction of movement, or you can go in lines, or you can combine the technique of making stitches. In the video master class you can look at the embroidery process in more detail.

When embroidering straight lines with a needle, you need to go through two rows of stitches to make the line more even and clear.

As you can see, embroidering with such a carpet technique using a special needle does not contain absolutely any difficulties. To avoid difficulties while embroidering, take note of some recommendations:

The final stage

That's all, our carpet embroidery is ready, all that remains is to put it in order.

Add a little shampoo to warm water and rinse in it finished work. Strong detergents may have a negative effect on the threads.

After this, lay the product on a flat surface and leave it until completely dry.

If during work the fabric becomes crooked from the hoop, you need to smooth it out a little with a slightly heated iron from the wrong side of the work.

Video: carpet needle embroidery technique

Knot embroidery in carpet technique - master class

Nowadays there are entire kits for embroidery using carpet techniques on sale. This set is suitable for beginners, and will also be an excellent gift for those who are interested in needlework. Carpet technique kits allow you to make an original rug, tapestry or pillow with your own hands. As a rule, the kits already include:

base fabric,
chopped pieces of yarn required length, sorted by color;
special hook (but not always);
drawing-scheme.

All that remains is to start embroidering as quickly as possible.

But such sets also have one drawback - high price. You can save money if you buy canvas and yarn separately. In this case, you will need to perform a series preparatory work(cutting and selecting colors of yarn, selecting and applying a pattern to the base). Of course it will take certain time, but it’s not that difficult to do. Which method to choose is up to you to decide, just as the result will depend only on your imagination and diligence.

To work you will need:

ready set for embroidery using carpet technique or canvas with a large cell or stramine;
leftover yarn. Even the smallest balls will do here. The yarn will need to be cut into strips up to 10 cm long, depending on the length of the pile you want;
hook for carpet embroidery. Fashionable to use regular hook, but it’s not entirely convenient for them. The hook, which is used in carpet technology, has special form, which simplifies the process of tying a knot from a thread after it is pulled through the canvas;
embroidery pattern. Here you can use absolutely any pattern for cross stitch, and a cell of carpet canvas should be equated to a cell of regular canvas. When calculating the number of cells, you should take into account that you need to leave a couple of centimeters at the edges for processing.

Preparing for embroidery

First of all, choose the design you like, or you can come up with it yourself. It is advisable that the diagram does not contain too small elements, because they will be practically invisible.

As a basis for embroidery, you need to take a special mesh called stramin. It is sold both in handicraft stores and in construction stores. Stramin is a dense canvas with large cells, which is widely used for making tapestry (in the video you will see what it looks like).

We draw the base into squares, with sides 10 by 10 cells.

The main tool for embroidery in carpet technique using the knotted method is a special curved hook, which can also be purchased at craft stores.

The yarn needs to be cut into pieces from 3 to 10 cm, depending on what kind of pile the future rug should have. You can use absolutely any yarn. Best option– acrylic yarn of medium thread thickness.

Operating procedure

The work will be done on the reverse side of the work, on which the diagram is applied. Watch the video before starting work.

Let's get started:

The result will be wonderful fluffy rug, which is indistinguishable from a purchased Persian carpet. You can choose absolutely any shape and size.

Video: master class on embroidery using carpet techniques

Other methods of embroidery using carpet techniques

Carpet cross stitch

In addition to these basic carpet techniques, a carpet can be simply embroidered, in the same way as tablecloths, shirts, towels, napkins, and tapestries are embroidered.

Important points:

For embroidery in carpet technology, special canvas needles are used, which are blunt at the tip and have a large eye;
The thickness of the needle should correspond to the thickness of the thread;
Threads for carpet technology can be very diverse in thickness and characteristics: wool, silk, acrylic, etc.;
The main rule when selecting threads: they should lie in an even layer, filling the background;
The thread tension when embroidering should be uniform.

Basic stitches of carpet embroidery

Cross stitch

Long cross stitch

Half cross stitch
Perhaps the most famous seam is the “cross stitch”. By the way, this seam is the basis for other seams in carpet technology.

First of all, in the direction from left to right, you need to make an even row of stitches, like half a cross. The second half of the cross will be performed in the opposite direction in the same way.

The next type of carpet seam is the “extended cross”. Pass the working thread at an angle through one vertical and two horizontal threads of the canvas. The order of work, in this case, is as follows: the working thread is laid in the direction of the seam from right to left, then it is covered in the indicated manner with stitches in the direction from left to right, and after that comes second a series of stitches, but in reverse side.

When making a half-cross stitch, you need to choose a working thread slightly thinner than the warp thread. The working thread is drawn horizontally from right to left, and then stitches are laid on top of it in the opposite direction.

Oblique tapestry stitch(first method)

Oblique tapestry seam (second method method)

Extended bias tapestry stitch
“Oblique tapestry stitch" can be done in different ways:

an oblique stitch is made through two threads of canvas in width, and one in height, which passes between two other horizontal threads, but without overlapping them;
The stitches are laid diagonally through one vertical and one horizontal thread of the canvas, overlapping the first.

By the way, it is the tapestry seam in various designs very similar to ancient carpet embroidery.

A little advice: when sewing a tapestry stitch on a hoop, the thread needs to be transferred to the front side from the back. And if you embroider without using a hoop, you need to turn the work over when each row ends and bring the needle out after the last stitch.

To perform an “oblique and elongated tapestry seam”, you need to proceed in the same way as when embroidering a regular one, but take three threads vertically.

It takes just a little effort and patience to create a soft and fluffy rug yourself using carpet techniques. Such an exclusive product will be a wonderful gift for loved ones or throughout for long years will make you happy. In addition, the carpet embroidery technique makes it possible to get rid of huge amount leftover yarn, which is probably stored idle in the bins of every needlewoman.

Use your maximum imagination, and then you will get a unique masterpiece created with your own hands.

Video: tapestry stitch embroidery

Delicate and romantic rugs using tapestry embroidery technique

Victorian roses on a rug Cross stitch, patterns
.

Some interesting carpet stitches

Let's look at a few tapestry seams.

For embroidery big works fits good seam "Renaissance". It is embroidered on a double outline. First, we draw a thread between two pairs of horizontal canvas threads lying close to each other. On top of this thread we make horizontal stitches from the bottom up. At the same time, we pass the needle through the large holes of the canvas and lay the working thread through two pairs of canvas threads. Having finished one rad, we move on to the next one on the wrong side.

Looks original eastern seam. It is performed with oblique (oblique) stitches. The first stitch is embroidered through one weave of double canvas, the second through two, the third through three, and the fourth through four. The result is triangles running diagonally after each other. To fill the empty space between them, we use a tapestry bias stitch.

Seam "Basket" We begin to embroider from the corner of the canvas. The stitches are placed in the order shown in the figure. We start each new stitch between two stitches of the previous row. This stitch requires a significant amount of thread and does not create noticeable transfer on the canvas.

There are several very simple stitches, which do not even need to be further explained - the technique for performing them is clear from the diagrams. These seams are called "Fern", "Stitch with a twig" And "Crossed Crosses".

Now let's move on to more complex seams. If you want to embroider an imitation oriental rug, you need to master velvet (Astrakhan) stitch. It is embroidered on thick double canvas or dense fabric with fluffy woolen threads. The velvet seam is made in horizontal rows, which are worked from the bottom up. We pass the needle through a cell of the canvas, make a free loop and immediately fasten it with a cross - and so on in each cell.

To make the loops even, we throw them over a stick, which we place in the direction of the horizontal row. When the row is completed, take out the stick and apply it to the next row. We calculate the length of the loop based on the fact that each loop should cover two squares of the canvas in the vertical direction. The loops of each next row cover the crosses of the previous one.

Having finished embroidering, cut the loops in vertical rows using sharp scissors. If the pile is uneven, carefully trim it with scissors.

An interesting type of carpet embroidery is kelim embroidery. This vintage look oriental embroidery very easy to do and incredibly beautiful, but requires a lot of time. The main thing in this embroidery is to choose the right colors. Weak tones are enhanced by bright contours, and bright ones are weakened. Two homogeneous tones are separated by a neutral. Most figures of oriental embroidery are bordered by a stripe of black or dark blue.

For embroidering kelim, strong and dense threads. You need to pay special attention to the execution of the contours - it determines the correctness of the entire drawing. Having embroidered the outline, you can start filling the background with straight lines (it does not require special attention). Bright hues embroidered after the dark ones and seem to be superimposed on a dark background. The threads should be tensioned evenly.

In principle, it's practically all basic stitches and carpet embroidery techniques. Carpet embroidery can be used not only for making carpets, but also for finishing bags, furniture... or anything!

So the first pattern for embroidering a carpet:

A cute rug made using carpet embroidery technique will perfectly decorate the interior of any room in your home.

Another beautiful rug

Embroidery pattern

And one more rug

Do you think that carpets can only be created experienced craftsmen? Not at all. IN Lately Carpet needle embroidery for beginners has gained immense popularity. Various techniques, creative patterns and handmade will make your carpet unusual. Inexperienced needlewomen can start by embroidering small paintings or pillowcases.

Beginning needlewoman's kit

If you have just decided to master the technique of carpet embroidery, you need to start with the basics. The easiest way is to buy a ready-made kit, which includes the following tools and materials:

special canvas with a printed pattern;
multi-colored yarn;
needle or hook.

There are two ways to embroider using the carpet making technique:

needle;
crochet

The do-it-yourself carpet embroidery needle is not like a regular needle. Its end has a beveled point, and the handle resembles an awl holder. As for crochet embroidery, this technique is more complicated. Some needlewomen often call an embroidery hook a needle in relation to this technique.

Before starting work, you need to learn some features, for example, types of stitches and methods of embroidering pictures. WITH front side they always turn out voluminous and fluffy. Now that you understand what rug techniques are, it's time to choose rug patterns.

In the vastness of the global network you will find many schemes for every taste. These can be children's drawings, exquisite paintings or geometric shapes. Such patterns resemble the usual cross stitch pattern. Experienced needlewomen They won’t notice the difference and can easily calculate the number of stitches.

The first pancake almost always turns out lumpy, so don’t despair. Buy from a specialty store special set. It contains tools and materials for work. All you have to do is embroider a small rug.

If you decide to make an exclusive designer product, you need to apply designs for carpet embroidery. You can use carbon paper.

On a note! Carpet embroidery with a needle is done from the inside out, so the design must be applied to the reverse side of the canvas.

Before you get started, review these tips:

the stitch should be no more than 3-4 mm;
on the front side the embroidery should be voluminous;
When embroidering with crochet, tighten the loops by hand;
It’s easier for beginners to work with ready-made sets;
It is better to embroider from left to right, moving from the bottom edge of the product upward;
Under no circumstances should you skip a single cell of the outline.

The first stitches in your creativity

Let's study the basic technique of carpet embroidery - needle stitch. Everything is very simple. Step by step you will get better at it, and over time it will seem to you that you have been doing this type of creativity all your life.

special needle;
embroidery fabric;
multi-colored yarn;
scheme.

Step-by-step description of the process:

Advice! First, it is better to embroider the outline of the design, and then gradually fill the inside in rows.

Second option: advanced level

For those who want to make a real carpet, embroidery with a special crochet is suitable. Skilled craftswomen use a device for knitting with yarn. But it is best to take a special tool. By appearance he reminds crochet hook, equipped with a tongue. When pulling the strand, the tongue snaps into place. As a result, a nodule is formed.