home › This is interesting › Lace dress on a lining tailoring. Lace fabric

Lace dress on a lining tailoring. Lace fabric

Lace is a very beautiful material that gives femininity and grace to every girl. Today, lace is very fashionable; it is used in the tailoring of absolutely all clothes, including tracksuits. But lace dresses have been especially relevant for more than one season. Despite the lightness and thinness of the fabric, sewing such things is quite easy. We bring to your attention a few step-by-step lessons on how to sew a lace dress with your own hands. We hope that they will help you create truly unique pieces that will not go unnoticed.

Basic rules for working with lace that everyone should know

Despite the simplicity of working with lace, problems can arise if certain nuances are not known. So that you do not experience such embarrassment, we bring to your attention a few rules that will greatly simplify and speed up the process:

You can connect lace details using a sewing machine or overlock. In this case, the choice of tool depends entirely on the ornament and the density of the material.
The seam allowances can be finished with a bias tape or an overlocker.
If the product needs to be adjusted strictly according to the figure, it is best to use knitted lace for these purposes.
If the finished product should not be transparent, you will need to choose a lining. For these purposes, it is best to choose thin knitted fabrics, satin or silk.

Important! In order for the finished product to be more original and extraordinary, the lining should be chosen in a contrasting color.

If you are sewing a dress or other item of stretch lace, it is best to strengthen the shoulder seams by sewing a cotton bias trim to them.
Try to choose models with a minimum number of seams. This is necessary in order not to cut the material too much and not to spoil the ornament.

If there are scallops on the cut of the lace you have chosen, they can beautifully decorate the edges of the finished product, sleeves or necklines.
Iron this material should be very carefully at a low temperature.

Lesson #1 Dream dress

We suggest you sew a maxi-length dress made of lace with a lining. This outfit is perfect for a wedding or prom.

To make it, you will need the following tools and materials:

3.5 meters of lace;
3 meters of knitted fabric for lining;
Scissors;
A remnant or tailor's marker;
Tape measure;
Sewing machine;
Threads in color;
Overlock;
needles;
Tailor's pins;
Hidden zipper;
Oblique inlay.

The sequence of actions when sewing an outfit:

Carefully cut off the scalloped edge of the lace.
Build a pattern and cut out the details you need from it.

Important! You can build a pattern yourself or download a ready-made one from the Internet.

Transfer the cut out pattern elements to the lace and cut out the details of the future product. Do the same with the knitwear for the lining.

Important! Details for the lining should be cut 4 centimeters less than the details cut from lace.

Cut out the “train” detail from the lace.
Finish the edges of the lining with bias tape. It should be sewn on with an overlocker, and then sharpened on a sewing machine.
On the lace part of the dress, sew up the side and chest darts. They should be stitched on the front side with a zigzag seam.
Cut off excess fabric from the wrong side of the workpiece.
Lay the lace blank on the blank from the lining.
Using tailor's pins, pin the blanks together and sew them with a sewing machine.
Sew the scallops onto the neckline with a zigzag stitch.
Sew the layers of the lining and the lace part with an overlock along the line of the middle of the back.
Insert a hidden zipper into the middle of the back.
Hide the zipper tails and fix with a hand seam.
Lay the details of the train on top of each other and sew it from the middle of the back. It should be in the form of a wedge.

That's all, an elegant dream dress made of lace is ready! You can wear it like this, and if you want to add sleeves.

Lesson number 2. Lace cocktail dress

This dress is also suitable for prom and party. To make it, you will need the following tools and materials:

Lace. It can be made from both elastic and non-elastic mesh;
Finished embroidery on chiffon;
Organza for a skirt;
Scissors;
Sewing machine and overlock;
Tape measure;
Tailor marker;
Tailor's pins;
Threads in color;
Coarse calico for the layout;
Needles.

The procedure is as follows:

Cut out the necessary elements of the outfit according to the pattern.
Transfer the pattern to the fabric for the skirt and cut out the desired piece.
Stitch the blank for the skirt with a seam of 1 centimeter and process the side seams on the overlock.
Iron the workpiece towards the front.
Make a seam where the zipper will be sewn.
Stitch in the middle seam of the skirt, starting at the 1.5 cm wide buckle. Iron the seams.
Cut out the elements of the bodice pattern, transfer the pattern to the calico and cut out the blank.
Baste the bodice from the mock fabric and make any necessary corrections and changes.
Open the lace bodice, taking into account all the corrections and corrections.
Stitch the chest darts and iron them upwards.
Stitch the waist darts and iron them towards the center.
Stitch shoulder seams. This can be done in two ways:
- Initially, leave a seam margin of about 1.5 centimeters. Place masking tape on the fabric to the left of the stitching. It should not cover the place of the line itself, but will pass exactly end-to-end. Sew a zigzag stitch along the right side of the tape. Overcast the edge of the seam and remove the tape.

Important! Try not to go on the tape while sewing.

Cut out strips 2-3 centimeters wide from newspaper or paper. Sew the shoulder or side seam with a regular straight stitch, after applying a paper strip to it. Remove the strip and stitch over the finished seam with a zigzag stitch. Overcast the edges of the seam and cut off the excess.

Important! If you are working with chiffon fabric, you should take into account the fact that its edges are quite loose. Therefore, so that the finished outfit simply does not disperse, the edges should be processed with a narrow and frequent zigzag seam.

From the main fabric, cut out a strip 4 centimeters wide along the oblique. Fold it lengthwise and in half, then iron it.
Finish the neckline with a slanting stitch.
Stitch the side seams and iron them towards the front.
Take the blank of the skirt, gather it along the upper cut so that it is uniform with the lower cut of the bodice.
Pin the blanks of the skirt and bodice with pins.
Overcast the seam on the overlocker and iron it down.
Sew a hidden zipper to the middle sections of the back.

That's it, the dress is ready! If desired, it can be made more magnificent by wearing a petticoat with rings or an organza petticoat with frills under the bottom.

Important! The organza underskirt should be sewn in the same way as the overskirt for the dress was sewn.

Lesson number 3. How to sew a lace dress for a girl

To make a summer dress for a little princess, you will need the following tools and materials:

A piece of lace fabric;
A piece of cotton fabric;
Threads in color;
needles;
Tailor's pins;
Sewing machine.

For a successful result, first take the necessary measurements:

Waist;
chest volume;
The desired length of the future product.

Further workflow.

What can be sewn from lace fabrics?

Lace is a very beautiful, festive material. From such material sew, summer coats and even! As a rule, expensive ones are sewn from lace, it can also serve as a finish in the product or duplicate individual details of the product (for example, and or).

If you are sewing from lace, which you will wear either with linen matched to the tone, or put on over a combination, you should follow the rules:

Depending on the ornament and the density of the lace, the pieces can be joined either on a sewing machine or with an elastic overlock seam.

The allowances of lace products can be overcast with a silk oblique trim or overcast with an overlock.

Rice. 1. Processing the allowances of a lace skirt with an oblique trim

You need to iron the lace very carefully, having previously tried it on an unnecessary piece.

If the lace is elastic enough, sew a bias cotton trim into the shoulder seams.

If you are sewing a product duplicated with lace, in this case, the base fabric can be any - silk, satin, satin, and even light wool will do. The product is cut from the base fabric and lace. Each piece of lace is superimposed on the base fabric and basted along the contour. Then the product is sewn as a single layer.

Rice. 2. Lace skirt, doubled with wool

Lace comes with scallops along one edge or both edges. Scallops are usually located at the bottom of the product, the bottom of the sleeves and the neckline of the product. In this case, the pattern is superimposed on the lace in such a way that the bottom of the product (sleeves or neckline) is cut out without allowances, along scallops. An example of such a cut can be seen here:

Lace is a favorite material for wedding dresses. Although many dressmakers find working with lace fabric very difficult, you will be pleased to know that these difficulties are somewhat exaggerated. The advantage of lace is that they do not need to process sections and cut them out only along the shared thread. In addition, a good result will reward you for all your efforts.

Lace properties.

Lace fabric for a wedding dress, as a rule, has a complex pattern. Popular lace tulle, like many other types of lace fabric, has a mesh (or honeycomb) as a base, on which the pattern is repeated and protruding loops (pico) along the scallops.

High-quality lace fabrics are very thin, they can be decorated with hand or machine embroidery, braid, ribbons, sequins, pearls, beads or beads. The honeycomb structure of the lace fabric allows you to ignore the direction of the shared thread and work creatively with patterned motifs and scallops.

Lacy fabrics and fabrics, as a rule, are of small width and are used for cutting coquettes, trimmings or appliqués. Sometimes the entire bodice and sleeves are made of lace fabric. Machine lace has patterned rapports along the entire length and not always - scallops and finished edges. Some motifs of such lace are repeated quite often and they can be cut into strips to finish the edges of the product. You can choose well-matched stripes for finishing the edges of lace details.

Lacing patterns.

Lace fabric can be used for the entire dress, go only for its individual parts. When buying a lace fabric, pay attention to how much material is required in relation to the pattern, as well as in relation to the layout of the lace patterns.
Consider if you can make the best use of this lace fabric for your product.

See how the lace itself, its pattern, weight and density will be combined with the style of your dress. Consider the direction of cutting the lace: whether you will need to cut it in length, in width, or cut out individual patterns or scalloped edges.

Take a close look at the lace pattern: is it possible to use its individual sections for decoration. Lace scallops can decorate the edges of the product, in addition, decorate the product with lace appliqués or trim the lace edges with braid. Depending on the type and weight of the lace fabric you have chosen, you must decide whether you will use the lining, and if so, which one.

Some very beautiful dresses are made without lining. Choose only a lining that will not affect the look of your lace. Lining fabric is best used for transparent lace, it can be the same color with it or another and even contrasting. The lining will make your dress tighter, more comfortable and will allow you to achieve a better fit.

Some laces are thin, but very sharp. For them, it is better to take an almost invisible thin mesh or tulle as a lining fabric. The lining can be shiny or matte. Try pairing lace with satin, taffeta, organdy, crepe, voile, or sheer leotards.

When working with light-colored lace, cover the work surface with a smooth dark cloth and spread the lace in one layer on this cloth. Lay out all the paper patterns on the lace, paying attention to how the lace patterns fit on the right and left sides of the front and back, as well as in the middle.

Either prick the details with thin pins on the lace, or press them with weights. Cut out lace fabric only with cutting scissors.

Open the lace.

When cutting lace, make sure that its pattern is not broken by the seam, but ends near the seam. Carefully plan and lay out your paper patterns like you would with a tartan. Arrange the patterns evenly and think about how to join the parts. Having achieved a good result, fix the paper patterns with thin pins or weights.

Ribbed lace, where the ribbons accentuate the floral motifs, requires more thought, although the well-known claim that lace does not fray is true, nevertheless, your results will be more successful if you do not cut the ribbons framing the outer line of the pattern.

To make it easier to cut the lace while maintaining the integrity of the pattern, circle the line of the motif with the help of threads. With a thread of a different color, mark the stitching line. Cut through the lace behind the stitching line, you can give a regular seam allowance of 1.5 cm wide or more if the piece is large. Cut out the lace only when you are sure you have drawn the lines correctly.

Before you start sewing, try ironing an unnecessary piece of lace. It is recommended to iron the lace on a terry towel or a special soft bedding, so as not to smooth the pattern. The lace is placed face down and then ironed with dampness through a damp cloth or iron, which will protect your lace from dirt as well.

Needles and threads.

Take pieces of lace and check what threads are suitable, the size of the needle for sewing it. If you are using a size 80 needle, thread your machine with cotton or polyester thread. Hold the lace along the seam front and back to keep it from sagging, but don't pull. Set the stitch length to 2.5mm, sew slowly. Vary the stitch length, needle and thread combinations, and thread tension until you reach the desired result. If, nevertheless, the lace is strung on the foot, sew through tissue paper or a transparent lining. If the lace gets caught in the needle bar, sew on a straight stitch or place a strip of tissue paper under the fabric.

Traditional overcasting and darting techniques are great for matted, lined, or piping lace. These seams can be adjusted at the last fitting. Seams on thin lace are processed with a double stitch or overlock. This overlay is very difficult to correct.

Connecting lace details along the marked lines.
Lay the parts on top of each other, combining the lines of the same patterns. Baste the detail along the seam line with a contrasting thread, make the necessary marks with a curly stitch. In this case, there is no need to make labels.

Seam stitching.
Secure the bottom edge of the piece with small zigzag stitches. Read the manual for your machine for which presser foot and stitch length to set.

Seam processing.
After stitching the pattern, cut off the excess allowances on the upper part of the lace. On the wrong side, cut the allowances close to the stitches. In the same way, tucks should be grinded.

Lace appliqué.

Application placement.
Sometimes it is not possible to place the pattern pieces so that the scallops are in the places you would like them to be, such as at the neck, at the bottom of the sleeves or at the bottom of the skirt. In this case, the edges are trimmed with stripes with scallops or appliqués, for which lace braid with scallops is quite suitable.

In addition, scalloped stripes can be cut from the lace fabric you already have or cut patterns from its inside. Place the lace strips on the edge you want to trim. For the best effect, try to evenly distribute the lace patterns: small patterns work best on small pieces like collars and cuffs, and larger patterns work better on larger pieces like a skirt.

Lace trim.
Lay the appliqué on the piece of fabric so that a single piece is formed. If the workpiece has sharp curves, trim the appliqué to shape with steam, or score the appliqué to make it lie flatter; pin and take.

To make the same scalloped hem as our dress, cut out a large triangle of scalloped lace fabric to secure it to the bottom of the front of the dress. Place the scalloped edge over the already sewn front of the skirt.

Sew by hand or machine stitch close to the top edge of the lace. To embellish the rest of the hem, cut out a scalloped strip following the pattern. Pin to the finished hemming of the back of the skirt, placing the inner edge of the scallops along the entire bottom edge.

The lace motif from the back panel of the skirt should end in such a way as to overlap the sides of the front appliqué; try to make sure that the motive is not interrupted, if possible, along the entire edge. Imperceptibly and firmly bend the straight edge of the scallops on your hands. Without grabbing the dress, connect the ends of the motif from the back panel of the skirt with an appliqué on the front panel of the skirt imperceptibly and firmly on your hands.

To complete the top edge of the large appliqué on the front of the dress, place individual motifs cut from the leftover lace to create a continuous beautiful lace pattern. Sew motifs on your hands firmly and discreetly.

Cutting out the fabric from under the lace appliqué.
Stitch the inside edge of the appliqué with a zigzag machine, or hand sew over the edge. Cut the base fabric close to the seam so that the appliqué is sheer.

Lace appliqué on satin.
Pin the appliqué from the wrong side to the right side of the satin. Baste. Along the edge and inside the pattern, sew the appliqué with small stitches by hand, being careful to keep the lace and satin lying flat. You can sew the applique to the edge with a narrow zigzag or straight stitches if it looks good.

Lace wedding dress from Milo.

I quote-

There was an impulse to sew a dress with inconspicuous seams (overlay), but the girl did not want to ... it was important for her that it was visible that the dress was sewn.
Yes, I wouldn’t have succeeded ... the fabric was only 1.60 with a width of 90 ... and since it was cut across, we can assume that the dress was sewn from 90 cm (with a width of 160).

Layout on fabric. The fabric is folded in a special way... there are folds on both sides, and the cuts "meet on the territory" of the cut

MK - details of sewing a lace dress with a lining.
Sewing dresses reduced to two principles:
1 - fasten the layers together, and then sew the parts together, as from ordinary fabric
2 - instead of an overlock, edge the slices

The second photo shows that the lace detail was cut out a little more (I fitted it later) ... and my pigtail is visible from waxed cotton threads for basting, which rapidly and safely (without getting confused) decreases, despite the fact that before sewing each I also prepare things with polyester threads to match.

Then the details were stitched along the contour at a distance. 4mm from the cut, cut off the excess.

A stitched tuck is visible on the silk back (going from the armhole, and not from the shoulder ... because the layout did not allow it differently) ... I didn’t make such a small one on lace, but simply sutured it in this area.

Bias binding.
I edged with the thinnest lining fabric to avoid additional roughness of the seams.
I did the first line on a machine, and the second by hand ... due to the uneven thickness of the layers on the machine, the second line turned out not so hot ... there are also complaints about manual edging - iron it strongly (then the lace pattern began to be printed) and it did not work out .

The underside... in real life it looks more decent than in the photo

The bottom of the silk layer

A delicate lace dress, which we will make with our own hands, is an undoubted hit of this year. Many popular fashion houses and designers have provided a variety of collectible dress models for the world to see. Dolce & Gabbana - elegant lace dresses in black shades, Valentino - luxurious floor-length holiday models, Versace, Burberies and Victoria's Secret - short beautiful dresses in rich colors and shades. In general, absolutely any dress model can be decorated with lace. wear a collar and cuffs to your outfit and you will look very fashionable and unique.But in this article we will help you create a romantic lace outfit.

We make a lace dress with our own hands: features at work

It is necessary to make a pattern of a festive outfit and cut out all the details from the material that is intended for the lining. You can make a straight lace dress from lace fabric.

The construction of the sleeve pattern will be the same as for a straight dress for a girl.

Before starting work on cutting out of lace material, it must be placed on a smooth surface. First, place a brightly colored fabric under the lace material so that the lace stands out well. When working with lace fabric, the direction of the shared thread is absolutely not important. Details can be arranged depending on how the drawing goes. Patterns of sleeves, shelves and backs of the model are placed in such a way that the scallops are at the bottom of the elements. Also see that the scallops are placed symmetrically and, if possible, connected in places where the elements are ground.

First, sew on the details of the outfit from satin or satin fabric, but you can also take another material of the same shade. The features of sewing the lining are the same as when sewing the model itself. Make darts and embossed seams. Gently go over them with a hot iron. Pay special attention to cuts. Connect the cuts on the sides and shoulders of the elements and sew. Trim the edges with an overlock or zigzag stitch. Lay the lace dress on the lining with the inside to the outside of the cover and sew. Sew the neckline with cuts with a hidden stitch yourself with your hands.

If you want to make a hidden zipper into the outfit, then sew it along the cuts of the back, connecting both the lace fabric and the lining. Then, you can sew according to the method of working with hidden fasteners. There is no need to process the cut of the outfit below, it will be interestingly decorated with scallops. And hem the lining twenty to thirty millimeters less than the lace. Bend it twice, first by five millimeters, then by 20 millimeters and sew on a sewing machine.

Your beautiful and elegant lace dress is ready.

Learning Easy Ways to Treat Elastic Seams: Tips and Tricks

The first way to process an elastic seam: initially leave a seam margin of 1.5 centimeters. This will make it easier for you to process it. And after grinding, you can cut up to seven millimeters with an overlock.

So, before stitching the seam, stick masking tape on the fabric to the left of the stitching. The adhesive tape should not cover the place of the line, but should pass exactly end-to-end. Now with a zigzag stitch, scribble along the tape to the right of it, without grabbing the tape itself, otherwise you will not be able to remove it later.

So you can avoid stretching the material and the line will be good and neat. Then overcast the edge of the seam on the overlock and remove the adhesive tape.

The second method also allows you to grind stretch materials. To do this, tear off two or three centimeters wide strips from the newspaper. Only white areas should be torn off, without printed letters, as the paint smears heavily, and you risk spoiling the light-colored material.

The first step is to grind the side or shoulder seam with a regular straight stitch, only by applying a strip of regular newspaper to the fabric.

Remove the newspaper and zigzag over the first stitch. The first stitch connects the layers and prevents the fabric from stretching, while the second stitch secures the seam and makes it strong. Then you overcast the edge of the seam, you can cut it to the narrowest width - 0.5 centimeters, so the seam will look softer and more inconspicuous.

A selection of thematic video for the article

At the end of our article, we bring to your attention a selection of an interesting video on the topic of making a dress from lace quickly and step by step with your own hands. We hope that after viewing the materials you will not have any questions on this topic. Happy viewing and learning!

Popular in category: