How to learn to make beautiful snowflakes from paper. How to make a beautiful snowflake from waste paper

Many of us made paper Christmas tree decorations as children. A variety of snow-white snowflakes delighted our eyes. But now we have forgotten how to make them, and this article is intended to remind you of this simple children's entertainment that will bring a little winter beauty to your home.

Paper snowflake

To create a snowflake we will need a diagram, paper, scissors and inspiration, which we will use wisely.

1. First, you need to make a triangle from a square sheet - a blank for the future snowflake. Exactly how to fold the sheet is shown in the figure below.

2. Transfer the diagram to paper with a pencil and cut out a snowflake.

Volumetric snowflake

Making a voluminous snowflake is no harder than a regular one; all you need is paper, scissors, a little free time and effort. Such snowflakes can be hung on a Christmas tree, decorated with them in a room, making them various decorations from colored paper.

1. As in the first case, we make a blank. You need to make six of them. To do this, fold each square diagonally and make cuts starting from the fold and moving towards the center. You can also download snowflake blanks and transfer them to thick paper.

2. Now open each square and roll a row of central strips into tubes, securing them with glue.

3. Rotate the snowflakes, twist and fasten the next two strips. We do this several times until we get a twisted figure like the one in the picture. This is one ray of our star. You need six of these.

4. Having twisted all the rays, they must be fastened with glue in the places where the sheets touch, so that the snowflake definitely does not crumble.

5. Our snowflake is ready, this is what it should look like

Snowflake origami

The first origami snowflake will take an hour, if not more, but believe me, the result will be worth it. This clear, perfect paper snowflake will be a rare decoration that you won't find anywhere else.

The first stage is the transformation of a rectangular sheet into a hexagon. For this:

1. Fold the sheet in half twice to mark the fold lines.

2. Bend the upper corner towards the center, bending its flap towards the edge.

3. You need to bend the sheet in half again, mark two X points as in the figure and bend valve A along the dotted line.

4. By combining the red and blue lines, as in the figure, we bend valve B, getting something like a heart.

5. Mark two X points and cut off part of the workpiece along them. So we will make a hexagon out of a rectangle.

6. We bend each side towards the center to mark the fold lines.

7. We repeat the same procedure along the marked lines, only we bend valve A to valve B, and fold the remaining edges in the same way. The last edge will be hidden under the fold. It must be pulled out so that all six edges stick up.

8. Press on the fold of each pocket to create an image in the center that looks like a star.

9. Now you need to bend two blue corners towards the center to mark the fold lines.

10. Now in each face the blue point X must be combined with the red one, as in the figure.

11. Now we need to rotate our star and bend each corner of the hexagon towards the center.

12. Then press the fold lines of each new valve.

13. Then turn them out, as in the eleventh point.

14. Now you need to turn the star over again and turn each corner away from the center, bending it over.

15. After which, between the six large valves there will be six small ones. They need to be pushed forward, forming diamonds.

16. (drawing) For each diamond, or rather its half, you need to pull the blue edge to the center and press it. Repeat this twelve times and the snowflake will be ready.

Snowflake-kurigami

Kurigami is origami using scissors; making snowflakes using this method is similar to regular snowflake cutting, but much more interesting. Now we will tell you how to make a kurigami snowflake.

1. You need to make a template. Therefore, on the sheet, using a protractor, we measure sixty degrees, fold the sheet diagonally and apply the template blank as in the figure

On the eve of the New Year 2017, it is customary to decorate homes, offices, kindergartens and other institutions. Beautiful paper snowflakes are one of the traditional New Year's attributes, the creation of which requires a minimum of consumables, as well as a little patience and perseverance. Thus, many from their “Soviet” childhood still remember hand-cut snowflakes from plain paper (as a more elegant version, from thin tissue paper) - using nail scissors and a simple pencil. Today, you can make your own paper snowflakes using the techniques of conventional or modular origami, quilling, as well as three-dimensional 3D products. How to make a beautiful paper snowflake with your own hands step by step? Today we will study the best master classes with step-by-step photos and videos on cutting out New Year's snowflakes using different techniques. We offer interesting ideas, as well as ready-made original templates and patterns of paper snowflakes - you will find all this on our pages. Creating large and small New Year's snowflakes with your own hands using photo and video lessons is quite accessible for children in kindergarten or elementary school. So, let's start creating New Year's “miracles”!

Do-it-yourself voluminous openwork paper snowflake for the New Year - step-by-step master class with diagrams, photos, videos

As a rule, we devote the last days of the outgoing year to preparing our home for a series of New Year and Christmas holidays. How to beautifully decorate your home or workplace for the New Year? Light airy paper snowflakes made by yourself will be an excellent element of New Year's decor in any room. And most importantly, when making these wonderful winter “flowers” ​​you can move away from the usual “flat” shapes and make a three-dimensional three-dimensional snowflake. We bring to your attention an interesting step-by-step master class with diagrams, photos and videos on making a voluminous openwork snowflake with your own hands from paper. For greater effect, you can use paper of two or three shades - it will turn out unusual and beautiful.

Materials and tools for making voluminous paper snowflakes with your own hands:

• squares of the same size made of white paper - 6 pcs.
• scissors
• pencil and ruler
• stapler

How to make a voluminous snowflake out of paper with your own hands - step-by-step master class instructions:

1. To create our three-dimensional snowflake, you will need to first prepare a special stencil - in the form of an equilateral triangle, according to which we will make the details of the product. We draw six lines on this triangle (three vertical and three horizontal) at equal intervals. Vertical and horizontal lines should be placed at right angles to each other, but not intersect (the distance between the cuts is approximately 1 cm).
2. Fold a sheet of colored paper in the shape of a square in half diagonally.
3. We make three cuts along the lines of the stencil.
4. The resulting square must be unfolded and the corners of the square located inside folded. We glue them together with glue or fasten them with a stapler.
5. We turn the sheet over to the other side and also fasten the folded corners of the inner square.
6. Now you need to turn the product over again and do the same manipulations. As a result, the smallest square will be inside the larger square.
7. At the end, turn the craft over again and fasten the corners of the largest square. It turns out to be a blank for a future three-dimensional snowflake - it’s very easy to make them with your own hands, even children can handle this task.
8. We make five more such blanks. Then we fasten 3 parts together - we get two halves of a snowflake.
9. We connect the two halves into one whole and “snap” it properly with a stapler - the structural parts should adhere well to each other.
10. For extra strength, we fasten all the elements of the snowflake with brackets at six points.
11. That's it, we got an original three-dimensional snowflake made of paper, assembled from several individual parts. The craft can be used as a decoration for a Christmas tree or window.

Alternatively, you can take a pine or spruce branch, decorate it with snowflakes, shiny “rain” and tinsel - and the elegant New Year’s composition is ready.

A simple and beautiful DIY paper snowflake - cutting master class, diagrams, templates, photos

In kindergarten or school before the New Year, children make paper snowflakes to decorate windows - it’s festive and beautiful! We offer the easiest option for creating paper snowflakes with your own hands, as well as diagrams and photos. So, we invite you to master our master class on cutting out paper snowflakes with your own hands for the New Year.

List of materials and tools for cutting out snowflakes from paper yourself:

• paper - white office paper or multi-colored napkins
• manicure scissors
• simple pencil

A step-by-step description of making a paper snowflake with your own hands:

DIY Christmas snowflake made from paper strips for children - simple master class, photo

Cutting out New Year's snowflakes from paper with your own hands is an extremely exciting activity. Especially if it is possible to use many templates and diagrams that greatly simplify this process. We have prepared a simple master class with photos for children and adults on how to make a paper snowflake from strips with your own hands. Take advantage of our lessons and you will quickly master all the intricacies of this ancient art.

List of materials and tools for making snowflakes with your own hands from paper strips:

• A4 sheet of paper – 1 pc.
• scissors
• ruler
• simple pencil
• stapler
• PVA glue

How to make a New Year's snowflake from paper step by step with your own hands:

1. We mark seven strips along the width of a sheet of paper, each 3 cm wide.
2. Now you need to cut the paper along the lines of the strips.
3. We place the resulting strips on top of each other and bend them exactly in the center - in half.
4. At the bend we punch the strips with a stapler.
5. You need to apply a little glue near the bracket and, folding part of the top strip in half, glue it.
6. Now we bend the glued strip upward and again apply a drop of glue at the bend.
7. Then we glue the next strip - similar to the top one.
8. Now you need to smooth out the folded strip.
9. In this way, we continue to glue the strips to the end - we get a blank of 14 parts of the future paper snowflake.
10. We cut each strip of the workpiece into three equal parts (width 1 cm), not reaching the middle by 3 cm (the distance between the end point of the cut and the center of the workpiece). You can cut several strips at the same time - both more conveniently and quickly.
11. The result is a cute base for a snowflake.
12. We move the ends of the side strips slightly to the sides, bend them and press lightly.
13. We repeat the same action and “process” all the other strips.
14. That’s it, the beautiful New Year’s snowflake made from paper strips is ready – as you can see, it’s as easy as pie to do it yourself. For crafts, you can use paper of different colors, and then decorate a room or other room with such snowflakes.

DIY New Year's snowflakes made of paper using the "Modular origami" technique - detailed master class, photo, video

Making New Year's decorations with your own hands is one of children's favorite activities on New Year's Eve. And while many people have long mastered cutting out simple snowflakes from paper, they are just yet to become familiar with the “Modular Origami” technique. Indeed, in the origami style you can create amazing three-dimensional crafts - animal figurines, fairy tale and cartoon characters, Easter eggs and baskets. Today we will study a detailed master class with photos and videos on creating New Year's snowflakes from paper using the Modular Origami technique. Try it - and you will get wonderful and original elements of New Year's decor.

We stock up on materials and tools to create our own paper snowflakes in modular origami style:

• paper – white and blue
• scissors
• simple pencil

Step-by-step description of making paper snowflakes with your own hands in origami style:

DIY New Year's snowflakes made of paper - original master class with photos

New Year and Christmas are always awaited with impatience and faith in miracles. On the eve of the winter holidays, it is customary to decorate the home with various New Year's paraphernalia - pine branches, paper snowflakes, animal figurines - symbols of the coming year. We offer you an interesting master class on making paper snowflakes with your own hands, and with the help of photos the learning process will become clearer and easier. For this craft, it is better to choose gold or “silver” paper - such a snowflake will turn out beautiful, shiny and festively elegant. Although white paper snowflakes look great in New Year’s compositions, lifting your spirits and evoking a unique feeling of a fast New Year and carefree fun.

Necessary materials and tools for making snowflakes with your own hands from paper:

• paper – double-sided cardboard
• scissors
• double-sided tape or glue gun

How to cut snowflakes from paper with your own hands - step-by-step guide:

DIY paper snowflake using quilling technique – master class with step-by-step photos and videos

Quilling is a technique that allows you to create light, airy crafts from twisted paper “rollers.” If you are not familiar with quilling, we suggest you master an unusual master class with step-by-step photos and videos on making your own paper snowflake for the New Year. Of course, the process of “producing” individual parts of the craft will take several hours. However, the result is worth it - a quilling-style snowflake will become an exquisite decoration for the New Year tree or an element of the festive decor of the office workplace.

Materials and tools for creating a snowflake with your own hands from paper using the quilling technique:

• strips of white paper – 5 mm wide
• scissors
• quilling tool
• lumograph

We make a New Year's snowflake out of paper with our own hands in quilling style - step by step:

1. To begin, cut strips of paper of the specified width - from an A4 sheet. You will need a lot of strips, so you will have to devote some time to this work stage.
2. We select six strips 14 cm long and bend them in half.
3. Now let's start twisting the “rollers” - we will need six strips (length 27 cm). We twist the strips one by one and make compact parts for the snowflake.
4. We leave the resulting “rolls” “alone” - during this time the part will straighten out a little. Then you need to glue the tip of the “roll”. All finished “rolls” must be the same size, which is checked using a lumograph.
5. We press the paper “rollers” on one side with our fingers - the part takes on a beautiful teardrop shape.
6. Each resulting “droplet” must be glued into the middle of a paper strip folded in half. We connect all the elements together and glue them together - we get the core of a snowflake with “rays” in different directions.

Greetings to all! Today is November 12th, and there is still no snow in our city. What's your weather like? We are all already looking forward to winter fun and the snow-white outfit of nature. I really want to go outside and feel how snowflakes slowly and gracefully fall on you.

As a matter of fact, we will talk about them, about these white cut-out beauties! Probably, these fluffies are an indispensable attribute for decorating houses, streets, school and kindergarten premises in the winter. There are different methods for making this craft. The main difference is the material from which it is made and the cutting methods. We will talk about how to make paper snowflakes using different patterns and cutting templates.

Don't forget that such blanks can be used as crafts for the upcoming New Year. You can get ideas for interesting and beautiful things that you can do with your own hands, getting ready for the holidays in advance.

You know, I would like to advise you to introduce such a tradition in your family: get together on cold evenings and create with your children, making and cutting out these simple designs, and then sticking them on the windows. And let passers-by envy your beauty!!

The easiest way to make a snowflake is to fold the sheet 5 times. The first four times we fold it in half, and the fifth time - diagonally. We cut out any patterns from the resulting blank and unfold it. Our New Year's beauty is ready!!

But this is a very simple and not very interesting way. To make it more complicated, you can make a tetrahedral version:

Or pentagonal:

Here is another simple and easy way to cut out our product:

And to make it even clearer to you, let’s now look at the manufacturing process step by step:

• We will make snowflakes from square paper. If you have a standard A4 sheet, then adjust it to the desired shape. Now fold it to form a triangle. We cut off the excess part and get a perfect square.
• We fold the square diagonally to form a triangle.

• Fold the triangle towards the far corners, creating another smaller triangle.
• We have a blank. Apply any pattern to it and carefully cut it out.
• All you have to do is straighten the finished product so as not to catch it and tear it.

On a note!! This is the easiest way to make a snowflake. Here the result depends on the selected pattern. The more complex the pattern, the more unusual and interesting the result will be.

Beautiful snowflakes with your own hands (made from paper)

I would also like to note that the more complex the decoration pattern, the more difficult it will be for you to cut it, so count on your strength.

For you, one more photo instruction for making a New Year's craft:

• Make a diagonal bend. If you do not have a square sheet, then do not forget to cut off the excess part. Next, roll the workpiece diagonally again.
• We divide the widest part of the triangle, that is, its base into 3 equal segments. We bend one corner so that the edge ends at the level of the mark. It will be below the base, but strictly under the mark. Now fold the second part and trim off the uneven ends.
• Draw or immediately cut out a snowflake.

I think, in general, you already have an idea of ​​how to carry out these simple designs and there should no longer be any difficulties in their manufacture. Here's another video for you on our topic, and let's move on to more complex options.

Volumetric snowflake. Cutting templates

To make a three-dimensional design, you need to master the techniques of kirigami and quilling. Let's take a closer look at these two methods.

• Paper snowflake using kirigami technique

We will need: bright colored paper (the back side should be white or colored); scissors; pencil with ruler.

Manufacturing process:

1. Cut out a square of colored paper of any size.

2. Fold it in quarters to reduce the size of the piece by four.

3. Make a diagonal fold.

4. Cut off the beveled corner at the top.

5. Cut out symmetrical triangles on the outside of the figure.

6. Using scissors from bottom to top, make two cuts on both sides of the sharp corner, as well as another cut on the right or left.

7. Unfold the paper and smooth it out carefully.

8. Now bend the resulting corners up or down at random.

9. Having folded all the corners, iron the craft.

10. When you place the product, turn it as desired with the front or back side facing you.

When you have become familiar with this technique, I offer you templates of more original types:

• like this one for example

• or like this

• maybe you will like this option

• Snowflake using quilling technique

This is very painstaking work, but the result is the envy of everyone. Although, if you look at it, everything is done extremely simply.

• We take a regular sheet of paper and, using a ruler and pencil, draw identical lines. Cut the sheet into strips.
• Take an awl and attach the edge of a paper strip to its end. Now we wind the strip onto the tool.
• Glue the end of the strip to the resulting coil and remove the roll from the awl. Make another such coil, but lightly squeeze it with your fingers on one side. Make five more of these teardrop coils.

• Take the first blank and glue six “droplets” to it.
• Roll six coils again and squeeze with your fingers on both sides. Glue new parts between the petals of the snowflake.
• Take three strips and fold them in half, then cut them. You should have six short strips. Twist six coils from them. Glue a new coil onto each tip of the piece.
• From long strips we make six more coils, only slightly larger in size than the first. To do this, do not tighten the paper too much. Glue them on top between small rolls.
• You need to make six more large coils and bend their sides with your fingers to make a square. We glue them at the top to the large coils.
• Take a pencil and wrap a paper strip around it, glue the end of the strip and remove the spool. We glue this part to one of the tops of the snowflake and thread a ribbon or string into the ring.

Here is a diagram of how you can still glue the parts:

• You can also make such a three-dimensional 3D figure.

We will need: paper, scissors and a stationery knife; scotch; glue; stapler

Cooking process:

1. Make six identical squares out of paper.

2. Bend each square diagonally and make 3 cuts towards the middle on both sides. The cuts should not touch, leave 0.5-1 cm between them.

3. Lay out the sheet and place it so that the uncut edges are vertical. From the inside you need to twist the two closest edges into a tube. Glue with glue or tape.

4. Unfold the workpiece and connect the next two strips. We turn the part over again and connect the 3rd row of strips. Glue the last strips too, turning the workpiece over to the other side.

5. We do the same with six squares. Then fasten them in three elements, turned in one direction. Then we fix both parts into a three-dimensional figure.

6. If necessary, secure the sides of the product with a stapler or glue.

And another master class on making winter beauties:

How to make a snowflake from a roll of toilet paper?

It turns out that to make such crafts, you don’t have to use regular paper; you can also use toilet paper rolls. And the work process is very simple, you only need to take one roll, PVA glue and paints, you can use acrylic, or you can use gouache. For decoration, use glitter, sequins or confetti.

Now just cut the toilet paper roll into equal parts, shape it into a flattened shape and glue it together. Top with material of your choice.

Here are a couple more ideas for designing structures made from rolls:

• use small and large pieces

• You can take different decoration elements from above

• Or you can just cover it with gold paint

Patterns of paper snowflakes for the New Year

Now that you are familiar with the different techniques for making this type of jewelry, I want to offer you diagrams and ready-made templates. Take, save, cut and create! Let holiday always reign in your home.

• scheme 1;

• scheme 2;

• scheme 3;

• scheme 4;

• scheme 5;

• beading pattern;

• macaroni beauty.

That's all for me. I look forward to your comments. Have a great mood everyone! Bye bye!

As the New Year approaches, there is an urgent need for paper snowflakes. You can use paper snowflakes to decorate a window in an apartment, country house, school classroom or office, decorate a child’s New Year’s costume, a New Year’s tree, or create hanging or wall-mounted New Year’s compositions.

Photo examples and ideas for decorating an apartment (room) with snowflakes:

It would seem at first glance, what could be simpler? It is enough to take a sheet of paper, fold it several times, and then use sharp scissors to make chaotic cuts - and behold, she is a beautiful paper snowflake.
However, many people are faced with the fact that they absolutely do not know how to cut out truly beautiful paper snowflakes. Snowflakes turn out ordinary, sloppy, of the same type with a large pattern.

We have prepared this article especially for you, in which we have placed detailed and understandable photo instructions. Using photo instructions, you can create outlandish paper patterns on snowflakes that will make Santa Claus himself jealous.

Once upon a time, people believed that snow or rain were water droplets. In the warm season, rain pours out of the clouds, and in winter they fly out like snowflakes. But scientists have proven that snowflakes are not formed from water droplets, but are produced from steam.
This vapor is constantly present in the air. He rises high into the sky, where it is very cold. There, water vapor turns into tiny pieces of ice. The ice floes move, collide and cling to each other. So they grow, becoming bigger and bigger. And they begin to fall to the ground like beautiful snow stars.

Ah, beautiful and sweet!
How could it become like this?
All made of rays - needles.
But the needles are not from Christmas trees!
And so delicate!
I'll catch her now!
(Snowflake)

Today we will present to your attention a master class on making paper snowflakes. There are many different techniques for making snowflakes with your own hands, but now you will have the opportunity to get acquainted with the easiest way to get what you want, with only a piece of paper and scissors on hand.
Due to its simplicity, this method of creating beautiful snowflakes from paper is very famous; it is used not only by adults, but also by children.

Step-by-Step Guide to Making a Simple Snowflake

Materials required for work:

1. A4 sheet of paper.
2. Scissors.
3. A simple pencil.
4. Ruler.

Rules for handling scissors:

1. Before work, you need to check the tool. Only use well-adjusted and sharpened scissors.
2. You should not hold the scissors with the ends up and carry them in your pocket.
3. Do not use scissors with loose hinges.
4. Do not use scissors while moving and leave them with the blades open.
5. It is allowed to pass scissors only closed, with the rings facing a friend.
6. Monitor the movement and position of the blades during operation.
7. Use scissors only for their intended purpose.

How to cut a snowflake from paper?

It's surprisingly easy to create a beautiful snowflake from an ordinary piece of paper. To do this, you just need to use scissors, paper, a pencil, beautiful diagrams, your inspiration and a little free time.

First, we fold the blank for the snowflake from a square sheet of paper, as shown in the picture below. Using different beautiful patterns, you can cut hundreds, and sometimes thousands, of snowflakes of various, beautiful and unpredictable shapes from the created triangular base.

Using a simple pencil, we transfer the drawings shown in the diagrams onto the base, and then cut out the snowflakes.

At the end of the article you can find other patterns for cutting out snowflakes from paper.

How to make a 3D paper snowflake?

A voluminous snowflake looks much more impressive than a regular one, and creating it is also simple (a little more difficult). Similar fabulous 3D snowflakes can be hung around the rooms, as well as on the tree itself to create the atmosphere of the New Year's holiday. You will need: 6 square sheets of paper, glue, scissors, stapler, inspiration and free time (15 minutes will be enough). A voluminous snowflake, if desired, can be made multi-colored by using colored paper to create its individual elements. But before you learn how to create three-dimensional snowflakes without instructions, it is better to use plain white paper (practice on it first). And a snow-white voluminous snowflake will always be in fashion.

1. First we make 6 such square blanks for the future snowflake. You can download these blanks for a small or large snowfield, and then print them out on a printer. If you are creating a large snowflake, it is better to use high-density paper - this is necessary so that the snowflake can keep its shape. Fold each square in half diagonally and use scissors to make cuts, moving from the fold to the center line.

2. Open the square with the cuts, which was folded diagonally, and place it in front of us as shown in the picture. We twist the first row of strips into a tube and fasten them with glue.

3. We turn the snowflake over to the other side and begin to work with the next two strips: we also connect them and fasten them with glue. We continue to work in the same spirit: we turn the snowflake over and fasten the remaining strips together. As a result of these actions, we should have a twisted, fancy element like this.

4. We have created one of the rays for our volumetric snowflake, and we need to make six of them! Therefore, we do the same with the other 5 blanks. We connect three rays of a snowflake in the middle with a stapler. Similarly, we connect the remaining three rays of the snowflake. Next, we connect these two large parts together.

5. Our beautiful three-dimensional snowflake is almost ready! You just need to use glue to connect the snowflake in those places where the rays touch each other. This is necessary so that the snowflake holds its shape properly.

So we made a three-dimensional snowflake out of paper! What great fellows we are! Now you can make it in color!

How to make a three-dimensional snowflake using origami technology?

Here it will not be so simple and it is possible that you will spend at least one hour creating your first snowflake using the origami technique. Well, in the future, when you understand the algorithm for creating such snowflakes, things will go much faster. One caveat - the thinner the paper, the more elegant the snowflakes will turn out. Translucent snowflakes that transmit light will look great on the window. Well, at first you can practice on plain office paper.

Before creating a snowflake using the origami technique, you need to turn a rectangular or square sheet of paper into a hexagon. This is one of the most important points, which will then affect whether our venture will be successful.

1. Fold the paper in half twice so that clear fold lines are visible.

2. Fold one corner with the top towards the center. Bend the top flap towards the edge. Now we have 2 more fold lines.

3. We bend the paper in half again as shown in the picture on the left. To make the shape from the right picture, use two X marks as a reference point and bend flap A along the dotted line.

4. Combining the blue and red lines, bend the valve. As a result of these actions, you should get a shape that looks like a heart.

5. Focusing on the X points, use scissors to cut off part of the workpiece along the blue line. In the future, we will only need the hexagon - part A.

If you have any difficulties with the hexagon, you can find tips and answers in the video:

6. Bend one of the sides of the hexagon towards the center to form a fold line. We do the same with all 6 sides. Now we have many lines inside our hexagon that form small triangles.

7. Again, bend the edge of the hexagon towards the center. Using the fold lines made in the previous step, we bend flap A to B, as shown in the left picture. Fold the other two sides of the hexagon in the same way until you create a shape resembling a pinwheel. The last valve can easily cause difficulty, since it will be hidden under the fold. It needs to be pulled out so that we have six valves sticking out, as shown in the picture on the right.

8. Lightly press the fold of each pocket with your finger to create something similar to the picture in the center. It does not matter which valve is on top.

9. Bend two blue corners on each laid out pocket towards the central part of the dotted line. This must be done to prepare the fold lines for the next step. The resulting figure should be externally similar to the image on the right.

10. Carefully unfold the folds made in step 8 to open the fold lines. In each pocket we combine the blue and red X dots. The fold lines obtained in step 9 will help us with this. When we perform this operation with all 6 pockets, our figure will look like the image on the right.

11. Turn the workpiece over and bend each corner of the hexagon towards the center. A small flap should form each adjacent fold. Do not hide the small flap under the fold. Let him remain on top. You have done everything correctly if you have a workpiece that looks similar in appearance to the picture on the right.

12. For all small flaps, press the fold line to create new fold lines, which will be needed in the next step.

13. We turn out the folds made in the previous step, hiding the valves from below.

14. We turn the figure over, turn each corner out from the center as far as possible and bend it. We should have 12 valves - 6 large and 6 small.

15. Turn the workpiece over. Between the two large valves you see small valves. We push each small valve forward. Now we have six diamonds.

16. For each half of the diamond, we pull the blue edge to the center of the diamond and press the fold to the edge. As a result, we get a figure like the image on the right. All that remains is to repeat this action 12 times and the origami snowflake will be ready!

How to fold an origami snowflake (video tutorial):

How to make a kirigami snowflake out of paper?

Kirigami is a type of origami in which, in the process of making a figure, you are allowed to use scissors and cut paper with them. The method of cutting out kirigami snowflakes is not very different from making simple paper snowflakes, but the result is much more interesting and creative.

First, you create this template, using which anyone, even a child, can make a six-pointed kirigami snowflake. To do this, we construct an angle of 60 degrees on a piece of paper. A protractor will come to our aid in constructing an angle.

We fold a square sheet of paper in half diagonally and place the blank on the template as follows:

We bend the corners of the triangle as shown in the picture:

You can draw the lines of future cuts on the workpiece with a simple pencil, and then use an eraser to erase these lines, or attach a pre-printed and prepared template to the workpiece and cut out according to it. If at this stage the workpiece is folded in half again, then to cut out a snowflake you can use simple nail scissors rather than a stationery knife. In this case, even a child can be entrusted with the work of cutting out snowflakes.

Schemes for creating kirigami snowflakes:

To make the snowflakes created using the origami technique even more wonderful, colorful and original, you can decorate them with sparkles, cute pompoms, rhinestones, wool balls, and color them with felt-tip pens and pencils.

Our paper snowflakes are ready! Unlike ordinary snowflakes, they will not melt, but will decorate our houses and Christmas trees for a long time!

Schemes for paper snowflakes

In nature, there are no identical snowflakes. In order to ensure that our New Year’s snowflakes are not all twins, we need to use different schemes (templates) when creating them. Try to apply as many schemes as possible. Experiment! Maybe you’ll even come up with your own scheme. You can use the following patterns for cutting out snowflakes from paper:

Of course, the most popular material for making snowflakes is paper, but with a little imagination and a little ingenuity, you can make this type of decor from other available materials, such as wire, beads, felt fabric, plastic bottles, cotton swabs and much more. Today we will tell you what to make snowflakes from for home decor. Ready-made snowflakes can be used to decorate a Christmas tree, curtain rod, door handles, ceiling chandeliers, and wall sconces.

What can you make snowflakes from or how to make snowflakes with your own hands.

Such snowflakes can be collected from a wide variety of pasta; in this example, shells and bows were used. We place the future snowflake on the table, glue all the pasta together with a hot glue gun or polymer glue, and finally paint the product with acrylic paint. You can read more about making such snowflakes; various examples of pasta snowflakes are also presented there.

Snowflakes made of wire.

We take a long piece of wire, wind one of the ends into a spiral, string a transparent bead, create a loop, followed by two more loops, twist the ends with loops. We proceed to the next part of the snowflake, thread the bead, create a long loop, press it with our fingers, create two more such loops next to it, twist all three loops one at a time. We do the same with the next parts of the snowflake. From the remaining piece of wire we create a cobweb in the center; to do this, we lead the wire from one ray of the snowflake to another, each time wrapping the ray at the center. You can tie a silver thread to the finished snowflake and hang it on the Christmas tree.

Snowflakes from plastic bottles.

We cut off the bottom of the plastic bottle with a knife, take a thin brush and paint a snowflake on the cut part of the bottle with acrylic paint. Finally, using an awl on top, we create two holes into which we thread a rope to hang the product.

Snowflakes made from paper towel tubes.

Using a stationery knife, cut the slightly flattened paper towel tube into rings 5-7 mm wide. We lay out a snowflake out of them on the table (the product can be supplemented with elements of their paper), glue all the parts with polymer glue or Moment glue. Cover the top of the snowflake with a layer of PVA glue and sprinkle with small sparkles.

Felt snowflakes.

We cut the felt fabric into circles (you can try using cotton pads), use a sewing machine and colored threads to draw out the outlines of the snowflakes, then use scissors to cut out their outlines.

Snowflakes made of beads.

Snowflakes can also be made from beads; the entire process of weaving snowflakes and beads is shown below.

Snowflakes made of beads.

To work, you will need three pieces of wire; they must be soldered or glued together with a glue gun in the center. String beads of different sizes onto the sections of the future snowflake, and so that they do not fall off at the ends, you need to create rings with pliers or treat the last beads with transparent polymer glue.

Snowflakes made from cotton swabs.

We cut out circles from thick colored cardboard, place cotton swabs on them, forming the outline of a snowflake, and glue all parts of the sticks to the base of the circle.

Snowflakes made of woolen threads.

On a sheet of parchment or a piece of film, draw a snowflake with a marker (photo below), grease the surface of the snowflake with rich hand cream. We cut off a short part of the woolen threads, soak it in PVA glue, and apply it to the drawn parts. When all parts of the snowflake are pasted over, use the spout of a bottle of PVA glue to draw the snowflakes piece by piece, covering them with adhesive film. Then we dip the brush into blue gouache and paint the applied layer of glue. We leave the snowflake to dry; when the product is dry, carefully separate it from the parchment or film.

Snowflakes with a hot gun.

We grease a sheet of parchment with rich hand cream, use a glue gun to draw the outline of a snowflake, after the snowflake has hardened, we grease its surface with PVA glue and sprinkle it with glitter. Using a glue gun, glue a string pendant onto the back side.

Snowflakes made from toothpicks.

We lay out two identical lattices from toothpicks, gluing them with PVA glue, then we wrap each of them at the joints with thread. Then we lay one lattice on top of the other, slightly mixing it clockwise, gluing it to each other with transparent polymer glue or Moment.

Snowflake made of matches.

On a piece of paper, draw with a pen and measure out the shape of a snowflake with a ruler. Then we take several boxes of matches and light each match to give them the desired color. Then we glue the matches to the surface of the shape cut out of cardboard. The length of the matches can be adjusted by cutting off the excess with scissors.

Snowflakes made from PVA glue.

Cover a sheet of parchment with a layer of hand cream, then draw the outline of a snowflake with PVA glue, sprinkle the product with fine glitter, and leave to dry completely. Then we carefully separate the frozen snowflake from the surface of the parchment (a video is presented at the end of the article).

Volumetric snowflake made of paper.

On a sheet of paper we draw six squares, in each of the squares we draw three more squares. We cut out large squares and bend each one in the middle. Using scissors, we do not completely cut along the lines. We unfold the square, fold the first row of strips, gluing them together with PVA glue or connecting them with a stapler. Turn the square over and connect the next row of strips. Then turn the square over again and connect the next row of strips with glue or a stapler. The same should be done with the next five squares. When all the parts of the snowflake are ready, they need to be connected together, pinned with a stapler.

Snowflake made of textile napkin.

Such a snowflake will greatly decorate the festive table, namely the guest’s plate. We take a square textile napkin, bend all four corners to the center, and also bend the newly formed four corners to the center. Turn the napkin over, bend the corners towards the center, holding it with your hand. We pull the corners out, carefully straightening them with our hands; between the rays of the snowflake we also straighten the corners outward. Place the snowflake on a plate, and place a large rhinestone or cone in its center.

DIY paper snowflakes.

Paper snowflakes can be glued to the glass of a window, hung on a fishing line from the ceiling, chandelier or sconce, and also used to decorate the New Year tree. To create a snowflake you will need a square sheet of paper, bend it in half, bend the corner of the left formed part to the bottom right, now bend the right corner to the bottom left, fold the resulting part in half. Cut off the excess part with scissors. Well, then you need to cut out the snowflakes using scissors according to the templates presented below.
How to fold paper correctly to create a snowflake.

What to make snowflakes from? Made from PVA glue.

As you can see, making snowflakes with your own hands is not at all difficult, especially since you can use completely different materials to create them. We hope that after this review, the question of what to make snowflakes from will no longer bother you.

The Decorol website invites you to subscribe to receive news; to do this, you just need to fill out the subscription form in the sidebar.