Crochet patterns are simple from thin threads. Crochet tight patterns

Every woman in her wardrobe has a crocheted item, such products are distinguished by an unlimited variety of openwork patterns that cannot be paid attention to. In itself, crocheting is considered an attractive applied art and there are few people who do not own such needlework, for sure at least one thing is knitted with their own hands. Learning how to crochet is not difficult, the main thing is to correctly and carefully perform the elements indicated in the diagram. Another point is the matching of the threads and the number of the hook, so that the patterns are clear and even.

Choice of thread and hook

Knitting a beautiful thing is the dream of every knitter, but no one thinks that the process can become tedious and irritable due to the wrong hook or yarn. The thickness of the threads is selected according to the size of the hook. Cotton threads are used for knitting, some of them have a synthetic or silk insert, this allows you to quickly complete the work and gives the product expressiveness and shine.

Depending on the density of the thing being created, the threads are selected with the appropriate thickness. The thinner they are, the lighter and more openwork the canvas will turn out. Napkins and thin summer blouses for women require threads with sizes of 20 and 30, but for overall and dense items, yarn for 10 is used. You also need to take the choice of hook seriously, firstly, pay attention to the number indicated on the package or on tool, and secondly, the strength of the handle, it can be plastic or wooden. The hook is selected from durable, non-bending stainless steel.

Hook feature - summer openwork items made of fine yarn

Summer is the hot season of the year and woolen clothes are out of place here if it is not an openwork blouse or top. They are knitted from fine yarn, for which a suitable hook is selected. Cobwebs from fine threads are created using a hook with a diameter of 0.6 to 1.5, but if a more spectacular pattern is being made, it is better to take frequently used fine yarn and a hook in sizes from 1.5 to 2.5. It is desirable to use a metal tool with the correct tip; it should not be sharp and slippery when grasping the thread.

Hooks for fine yarn have a small length to the handle so that the loops do not turn out to be elongated, and this can disrupt the texture of the pattern. A flattened handle is considered more convenient than a rounded one, it does not press on the fingers so much and does not allow the tool to slip off

patterns

The selected pattern affects the thickness of the canvas and softness. If performed with a jacket or cardigan embossed with flowers, then the pattern is knitted tightly. But blouses or jackets with lace, which do not hide underwear, a top or a shirt, must be made with openwork motifs. Crochet allows you to create many patterns of clothing: blouses, skirts, dresses, hats, etc.

knitting techniques

Any crochet pattern is done in several ways:

• air loop (the main knitting element, forms a chain with which any product begins);
• yarn over (thread is thrown on the hook, where there is already a loop, the more yarns, the higher the column);
• half-column (a loop is drawn from the previous row and knitted together with a loop on the hook);
• column (knitted with a crochet and without a crochet); pico (edge ​​binding).

In order not to get confused in these details, they draw up diagrams with the designation of each element. Sometimes you have to perform complex patterns, as in the broomstick knitting technique, here an additional long object (knitting needle or ruler) is used. The task of the technique is to perform even large air loops, which are then tied with a bunch of five columns without a crochet, while forming a figure eight.

But for the Tunisian pattern, a selection of a long hook is needed to make it convenient to hold like a knitting needle or a pencil. The fabric is knitted on one side only, it does not turn over, as when knitting. Here one row is knitted from left to right and, conversely, from right to left. In the front line, the loops are knitted immediately, and in the wrong side, all loops are first thrown onto the hook, and then knitted one at a time. The choice of hook does not correspond to traditional knitting, if hook No. 2 is needed with the selected yarn, then 2.5 is taken according to the Tunisian technique.

There are also a lot of patterns that are knitted using a special technology, and each one is interesting in its own way. And in the catalog, things seem unique, as the pattern and style of the product are combined.

Dense patterns are often knitted for warm clothes, which are so necessary for every person in the cold season. Coats, skirts, hats, blankets and sweaters made of thick yarn are made with these patterns, which will surely warm and give comfort during bad weather. In addition, another advantage of dense patterns is the ability to perfectly maintain their original shape.

These patterns are crocheted by interlacing different types of columns. That is why there are a huge variety of variations of these thick and, as it were, knocked down patterns, among which there are both simple ordinary yarn ornaments and interweaving of threads of incredible beauty.

Dense crochet patterns - diagrams and description

Dense patterns are selected depending on the type of clothing and the author's idea. Let us consider in detail some of the methods of crocheting dense patterns and patterns for their implementation, which differ in complexity. Let's start with the simplest dense patterns that even beginners can knit.

Knitting for beginners

By itself, crocheting dense patterns is considered a fairly simple task, since the fabric turns out to be thick because of them, and some even call them rough. Dense patterns are considered the exact opposite of delicate and airy openwork patterns, so beginners should start their acquaintance with this craft by making dense patterns. These patterns are also convenient because they train inexperienced knitters to regularly perform fairly simple crochet manipulations.

• Single crochet pattern

The simplest dense pattern based on single crochets. The pattern begins with a set of air loops. The first column is knitted into the second loop from the hook (one lifting loop).

1 row: 1 lifting loop, * 1 single crochet for one wall of the loop *;

2 row: 1 lifting loop, * 1 single crochet "into the loop" *.

All other rows are knitted as the second row.

• Elongated single crochet

This pattern is very similar to the previous one, so it is just as easy to knit, and the fabric from it is softer and more elastic than from simple single crochets. In addition, it will have something in common with openwork patterns due to the "gaps" between the elements.

The initial chain of air loops: 2 lifting loops, the first column is knitted into the third air loop from the hook.

Insert the hook into the loop, grab the working thread and pull it through the loop. There should be 2 loops on the hook. Knit a chain through the first loop on the hook.

And again, there should be 2 loops on the hook. Knit a stitch by pulling the working thread through the remaining 2 stitches. Next, knit columns in each loop of the row.

• Bosnian pattern

A very dense pattern that does not stretch in width, but stretches in length. This pattern is crocheted with half-columns for the back wall of the loop. The lifting loop does not need to be knitted, but the first column in the row is always knitted for both walls of the loop in the first loop from the hook.

1 row: half-column “into the loop” * 1 half-column behind the back wall of the loop *.

The vertical repeat of the pattern is one row.

Hat Ideas

A good choice would be a tight crochet pattern for a hat. Since the purpose of this product is to keep the head warm and protect the hair from wind and frost, it is better to knit hats with dense patterns. Consider several successful options for dense patterns for crochet hats.

• two color waves

Beautiful dense pattern that looks good on hats.

Number of air. n. typesetting chain is a multiple of 3 + 1 + 2 air. lifting item.

1 row: 2 air. lifting item, 2 tbsp. s / n in 1 p. of the base, skip 2 air. n. typesetting chain, * 1 tbsp. b / n and 2 tbsp. s / n in 1 p. of the base, skip 2 air. n. typesetting chain, repeat from *, 1 tbsp. b/n.

2 row: 2 air. lifting item, 2 tbsp. s / n in 1 p. of the base, * 1 tbsp. b / n and 2 tbsp. s / n in Art. b / n, repeat from *, 1 tbsp. b / n in the air. lifting item. Repeat 2nd p.

• Scales

A more complex pattern, but interesting and original in its form. Volumetric scales are perfect for children's hats and scarves. The pattern will take a fairly large amount of yarn. Let's take a closer look at how this unusual pattern fits.

Cast on a chain of air loops, the number of loops should be a multiple of 6 + 1 ch. call + 2 ch. lift + 1 v.p. for a pattern. 6 loops of the air chain is one scale.

1 row: In the 7th air loop we knit 1 tbsp. s / n, 1 ch, in the same loop 1 tbsp. s / n, 1 ch, skip 2 loops of the base, in the next 1 tbsp. s / n, ch 1, skip 2 loops of the base and knit 1 tbsp. s / n, 1 vp, 1 tbsp. s / n in one loop. Next, continue the pattern alternating a single double crochet with a tick in one loop to the end of the row. The row should end with a single crochet.

2 row: 2 row: Turn the work sideways with the loop on the hook up. Double crochet on the hook and insert the hook under the first wall of the checkmark of the previous row, knit the first double crochet, do the same for 4 more tbsp. s / n (the number of columns depends on the thickness of the thread, if you chose a thin thread, then you need to increase the number of columns, if the thread is thick, then decrease). Further, without making additional loops, knit another 5 tbsp. s / n for the second wall of the checkmark. Turn the work inside out towards you, i.e. with a mesh back to yourself and attach with a connecting column (half-column) to the loop of a single double crochet of the previous row. Again, turn the work with the pattern towards you and again knit 5 tbsp. s / n for each wall and reconnect the conn. Art. (half-st.) for the loop of a single st. s / n of the previous row. And you do this until the end of the row. Attach the last scale to the second air. Loop of the previous row.

Important: If you want to make not scales, but leaves, then after knitting 5 tbsp. s / n for the first wall of the checkmark, do 2 air.p. and knit the connection. in the second loop from the hook, and then knit 5 tbsp. s / n for the second wall of the checkmark.

3 row: This row is increased by 2 scales. When knitting a pattern, you will alternate rows, sometimes more, sometimes fewer scales, but at the same time, on the reverse side, the fabric will look even, and you can easily connect the parts. The row starts with a set of 3 ch. for the first tick of a new row + 1 ch. and knit the first double crochet in the same loop where the air loops began, 1 ch, knit a double crochet in the middle of the scale, 1 ch. between the scales again a tick and so on until the end of the row. At the end of the row, we knit a check mark in the last loop.

4 row: Repeat the scales pattern as in the second row. When the last double crochet is knitted in the last scale, you knit a connecting column in the middle of the scale, thus securing the end of the row.

5 row: It is necessary to reduce the number of scales again, so the set of the row begins with 3 air loops (this is a single double crochet) + 1 ch. and then again between the scales you knit a check mark. The row ends with knitting a single column in the middle of the last scale.

6 row: knit the pattern again, as in the third row.

Thus, the scales alternate: sometimes more, sometimes less.

You can also knit according to these step-by-step photos:

Master class on creating patterns for a skirt

When choosing suitable knitting options for different models of clothing, a dense pattern for a crocheted skirt is often advised, since the finished product pleases its owner for a long time with its original shape, does not stretch, looks interesting and original, and most importantly, does not freeze. Consider several options for patterns suitable for skirts.

• shells

Despite the slight delicacy, the canvas of shells is dense. This beautiful pattern is knitted in columns with one or more crochets in one loop, after which a single crochet is knitted, into which a fan is knitted in the next rows.

First you need to dial the number of loops that you need, but it must be a multiple of 6 and plus 2 loops (for lifting).

1 row: Single crochet into second chain from hook, then skip 2 chains and single crochet 5 times in the same next chain. Skip the next two air loops and knit a single crochet into the third loop, then 2 air loops are skipped and a fan is knitted again. And so it fits to the end of the row.

2 row: 3 lifting loops are knitted and 2 more double crochets are knitted into the very first loop, i.e. in the last single crochet. 3 lifting loops replace 1 double crochet. Next, a single crochet is knitted into the third double crochet from the fan of the previous row. A fan is knitted into the single crochet of the previous row. Knitting continues to the end of the row. The row ends with three double crochets in the single crochet of the previous row.

3 row: 1 air lift loop is knitted and a single crochet is knitted into the first double crochet of the previous row. A fan is knitted into the single crochet of the previous row. Knit to the end of the row. The row ends with a single crochet in the third air loop of lifting the previous row.

• bumps

This tight openwork pattern is perfect for a summer skirt. The pattern is simple and knits pretty quickly. Consider the method of knitting in more detail.

First you need to tie a chain of odd number of air loops plus 3 loops for lifting. For bobbles, you will need to double crochet three times in the same stitch without doing the last step and then work all unfinished double crochet stitches in one stitch. In a way, this is similar to subtraction.

In the fourth loop of the base, you need to knit 3 columns with a crochet, but do not finish them, i.e. you yarn over the hook, insert the hook into the base loop and pull up the working thread, we have 3 loops on the hook, knit the first two and stop there. You have 2 loops on your hook. Yarn over again and pull the working thread from the base loop, total 4 loops and knit 2 loops again and stop, total 3 loops on the hook. Yarn over again and pull the working thread from the base loop, total 5 loops on the hook, knit the first 2 and you end up with 4 loops on the hook. Yarn over and pull through all 4 loops. The bump pattern is ready. There may be more such columns in the “knob”, then the pattern will turn out to be more magnificent.

The "bumps" pattern is mainly knitted through one air loop. Therefore, after you have tied the “bump”, you need to make one air loop and skip 1 loop at the base, i.e. the next "bump" must be knitted in the second loop. And so it fits to the end of the row. Each row begins with 3 lifting loops, ends with knitting a “knob” into the third lifting loop of the previous row.

The second row is knitted even easier, there is no need to count, all the “bumps” are knitted through one air loop in the gaps between the “bumps” of the previous row.

• rice fields

A beautiful dense pattern that will certainly attract all eyes to your new skirt. A big plus of this pattern is the ease of execution, since single crochets and double crochets are used for knitting. The pattern is quite dense, but not hard - so it fits perfectly for a skirt. Its simplicity is also good because it allows you to beautifully combine several different patterns on one canvas.

For the sample, a chain of air loops is dialed in a multiple of 2, plus 1 loop for the symmetry of the pattern, plus 2 lifting loops.

1 row: 2 lifting loops, * in the 3rd loop knit 1 single crochet and 1 stitch with 1 crochet, skip 1 loop of the chain * knit 1 stitch with 1 crochet in the last loop of the chain;

2 row: 2 lifting air loops, * 1 single crochet and 1 single crochet stitch into the stitch with 1 crochet *, single crochet into the last air loop of the row;

The subsequent rows are knitted in the same way as the second row.

What to choose for a coat?

A crocheted demi-season coat is also a very necessary thing in the wardrobe. And the ideal solution in this matter will be a dense crochet pattern for a coat. These patterns make you feel comfortable and confident. They retain their original shape, do not allow things to stretch, and perfectly retain heat. Moreover, many of them look very original on the finished product.

• Tunisian pattern

This pattern is considered ideal for knitting sweaters, cardigans, and most importantly - for coats. The fact is that the structure of this pattern does not allow heat to pass through, practically does not stretch and protects the thing from deformation. To make it clearer how to knit it, you should study this master class with step-by-step photos.

Important: For Tunisian knitting, a special long hook-knitting needle is used, because, unlike other types of crochet, in Tunisian knitting, all the loops of the row are located on the hook. The length of the hook must correspond to the width of the canvas, otherwise you will have to sew separate strips. The hook is held in the hand like a knitting needle. Some use a larger hook than is needed for the chosen yarn. This provides a slight elasticity to the canvas. Tunisian crochet requires less yarn than traditional crochet. Loops should be knitted without tightening too much. When knitting, the fabric is twisted due to its high rigidity, therefore it is recommended to steam the knitted parts of the product before joining them.

We collect a chain of air loops. Starting from the second loop, we pull out one loop from each link of the chain, leave them on the hook.

The number of loops of the first row should repeat the number of air loops in the chain. In the second row, we perform alternate closing of the loops. This series is also called "reverse".

We knit the first loop, then we close all the remaining loops in pairs. There should be one loop left on the hook at the end.

The first two rows are knitted in the same way always for each pattern in Tunisian knitting.

Next, we knit a rapport, it consists of two rows. The first row is the capture of loops (they also say that Tunisian knitting is knitting “in a set”), the second row (reverse) is closing. Knitting is not turned inside out, the fabric is always knitted on the front side.

To capture the loops, it is necessary to straighten the first two rows and clearly mark the protruding vertical broaches, or they are also called Tunisian columns. Alternately insert the hook from right to left through the broach, grab the working thread along the front side and pull it out.

Thus, we collect loops on the hook again. It is necessary to ensure that the loops on the hook are the same height and not tightened. In the second row we close the loops in pairs, not forgetting that we close the first one, so we raise our rows.

• flower meadow

Another option for knitting a charming dense pattern in the form of a floral motif with braids. This pattern is quite complicated to perform, but it will look great on knitted coats, snoods, leggings and many other warm things.

Abbreviations in the knitting pattern:

c.p.- air loop;
RLS- single crochet;
SS- connecting column.

The pattern is repeated every 4 rows. In the 1st and 3rd rows, the elastic band from the SS and berries alternates, and in the 2nd and 4th rows, only the SS is knitted.

Important: when knitting a pattern, knit all loops behind the back wall of the loop.

Progress:

Cast on ch 23 (3 loops for an elastic band, 4 loops for a berry, 4 loops between the berries, 4 loops for a berry, 4 loops for a gap, 3 loops for an elastic band, 1 loop for lifting) (photo 1).

1 row(front side): the first SS in the second ch. from the hook, SS in the next. two loops (photo 2), then a berry is knitted: * 1 RLS in the next. loop, ch 1, now you need to find the front leg of the just knitted sc (see the next figure and video below) (photo 3) yarn over, insert the hook into this left front leg of the sc, grab and pull the thread, grab the thread again and pull it through 2 loops on the hook (2 loops left on the hook), i.e. the so-called unfinished double crochet was knitted (photo 4).

Then you need to make a yarn over again, insert the hook in the same place (the front leg of the RLS), pull out the thread, grab the thread again and stretch it immediately through 3 loops on the hook (2 loops left on the hook), i.e. as if a half-column with a crochet was connected, skip one loop (for the 1st row - one ch of the initial chain) (photo 1) insert the hook into the next. loop, pull out the thread (3 loops on the hook), grab the thread and stretch it through all 3 loops on the hook (photo 2), BN in the next. loop. * The berry is ready (photo 3). We make 4 sl-st (photo 4), berry (repeat from * to *), 4 sl-st for the gap, 3 sl-st for the elastic.

2 row(wrong side): ch 1 lifting, SS to the end of the row (total 22 SS). To better see the back walls of the loops, you can hold the knitting vertically (photo 1). Be sure to recalculate the number of CCs to avoid mistakes. Remember to work sl-st in the last st of the row, which is ch. lifting the previous row (photo 2). 3 row: ch 1 lifting, 3 sl-st for the gum, 4 sl-st for the gap (photo 3), 4 sl-st, berry, 3 sl-st for the gum. (the berry has shifted in a checkerboard pattern) (photo 4).

4 row: Knit as 2nd row.

Repeat rows 1-4 to continue the pattern.

simple openwork pattern

Among the dense patterns, there are also openwork ones, which, due to their multi-layered structure of yarn, create the effect of relief and airiness. A similar openwork dense crochet pattern is used both for knitting winter or demi-season items, and when creating summer clothing patterns. In this case, the decisive role will be played by the density of the yarn, which is responsible for the "openwork" of the dense pattern. Consider several knitting patterns for such ornaments.

• openwork motif

This simple pattern will also change its functionality depending on the thickness of the chosen yarn, which means that the product will be more "open" if the yarn is thin, and more dense if the threads are thick.

In order to start knitting, you need to cast on a chain of odd number of chain stitches plus 3 chain loops for lifting.

1 row: in Knit the 4th air loop of the initial chain 1 tbsp. s / n. *2 unfinished art. s / n with one peak (1st st. s / n in the same ch as the previous st. s / n, skip 1 ch, 2nd st. s / n), 1 tbsp. s / n in the same loop of the initial chain as the second incomplete st.s / n *. What is in ** is our pattern. We knit it to the end of the row. The row ends with knitting the completed st. s / n in the loop, where the second unfinished st. s / n.

2 row: knit 3 ch for lifting. Knit 1 st. s / n in the first st. s / n of the previous row. *1 tbsp. s / n to the top of unfinished sts knitted together. s / n of the previous row, 2 unfinished art. s / n as in the previous row through 1 loop *. The series ends with 1 tbsp. s / n to the top of unfinished sts knitted together. s / n of the previous row and another st.s / n in the last st. s / n of the previous row.

The pattern is repeated from the 2nd row.

• wonderful pattern

This crochet pattern also turns out to be both dense and openwork. It will look good on summer skirts, T-shirts, blouses, demi-season hats. Here, too, the density of the pattern and the degree of openwork depend on the thickness of the yarn.

In order to start knitting, you need to cast on a chain of chain stitches in multiples of 3 plus 2 chain stitches for lifting.

1 row: It is necessary to knit 2 tbsp. s / n in the 4th vp initial chain. Next, skip 2 ch. and 3rd knit a pattern * 1 tbsp. b / n, 2 tbsp. s / n *. Skip ch 2 again. and knit the pattern until you have 4 stitches left. Two v.p. skip, and in the 3rd and 4th you knit one st. s / n.

2 row: Knit 2 ch. for lifting. Skip the first st. b/n. (i.e. knit in the first st. s / n of the previous row) and in the second knit 2 tbsp. s / n. Next, a pattern is knitted * 1 tbsp. b / n, 2 tbsp. s / n * in a single crochet of the previous row. The pattern is knitted to the last single crochet of the previous row. The series ends with the fact that in the first art. s / n of the previous row is knitted 1 tbsp. s / n and knit another st. s / n in vp lifting the previous row.

The pattern is repeated from the 2nd row.

Openwork crochet patterns

Cute openwork pattern for crochet jackets, pullovers, blouses, tops.

Pattern scheme

Interesting pattern of crossed columns

A very interesting pattern of crossed crochet stitch groups.

Knitting is very simple: the first group of 3 CCHs is knitted through an arch from the ch. the previous row, and the next group in the previous arch. It turns out very beautiful and unusual.

Colored knitting is very attractive, and how beautiful the openwork patterns look in color with a highlighted vertical repeat of the pattern. I propose to consider a method of crocheting colored openwork patterns, similar to colored intarsia knitting. With this method, it is better to select patterns with a linear rapport of the pattern in order to highlight the openwork pattern with color vertically. Each colored stripe is knitted from a separate ball of thread, so dividing the pattern into several stripes requires its own skein of yarn for each. The knitting method itself is very simple and consists only in changing the color in knitting.

So, for knitting a color sample, a “spider” pattern was selected, for example, three rapports of the pattern are connected with different colors of yarn.

We collect a chain of air loops, in the first row, knit the first rapport with the same thread. Next, after finishing the rapport with a double crochet, attach a new thread. To do this, form the initial loop from the thread of the new color and pull it through the working loop on the hook, like an air loop. Disguise the end of the attached thread, fasten and cut. Continue knitting with the attached thread of the second rapport. Next, also make a thread change for the third pattern repeat.

In the second row, after finishing the knitting of the first rapport, after the air loop, knit a double crochet with a thread of medium color. To do this, remove the old thread, and yarn over the hook with a new thread,

then insert the hook into the loop, grabbing a new thread, pull out the loop,

re-grabbing the thread, knit all the loops to the crochet, hook the thread again and knit all the loops on the hook.

Thus, the column is connected with a new thread, and the broach is almost invisible. If necessary, tighten the loop of the old thread and continue to knit the second repeat with yellow thread.

On the third row, also change colors when knitting the first double crochet of the next repeat of the pattern. To do this, remove the old thread, with a new thread, yarn over on the crochet hook st. s / n, and knit a double crochet with a new thread.

When knitting, do not get confused, because each color strip has its own ball, so when turning the work, it is better to shift the balls in sequence.

When finished knitting, fasten each color of the thread.

The pineapple color pattern looks very attractive with vertical wavy stripes.

And further...

Swirl pattern

Presented to your attention is a charming napkin, which is crocheted. It resembles a forest clearing, which is located on the edge of the forest. A large flower bloomed in the center of the napkin, and smaller flowers lined up around it in a circle. The napkin is knitted with two shades of yarn, which gives it beauty and tenderness.

To crochet a doily of flowers, you will need the following materials: yarn of pink and white shades or any other that match with each other, a hook according to the thickness of the yarn, scissors.

The approximate size of the finished napkin will be 18 centimeters.

We start knitting a napkin of flowers from the central one. It is knitted from the center in the round. Next, we knit small flowers. When knitting each last row of a small flower, we connect it with a large one. The pattern for knitting a napkin is shown in the figure below:

When knitting, do not forget to alternate the color of the yarn. A ready-made, crocheted napkin with flowers should be starched before use. Good luck to you!

Do you still wash dishes with ordinary sponges (napkins)? A mess, since for a real knitter they must be knitted. Here, for example, are those shown in the figure above. Crocheted napkins for washing dishes are colorful, cute, beautiful. They are knitted from yarn with microfiber. It is very convenient and practical, as microfiber is easy to care for. Any dirt is easily removed from it, and it also does not rub, does not peel, is resistant to light and chemical effects.

Interested? Then let's get to work. Multi-colored yarn with microfiber, a hook according to the thickness of the yarn, as well as scissors, that's what you need to knit napkins. All selected yarn must be of the same thickness and texture, otherwise the napkin will turn out to be twisted.

Knitted napkin for washing dishes has the shape of a flower. The figure below shows a pattern for knitting a napkin:

The napkin is knitted from the center in a circle. When knitting, do not forget to alternate the colors of the yarn so that it comes out multi-colored.

Actually, that's all, a crocheted dishwashing napkin is ready!

For the first time, looking at such a crocheted napkin, I immediately had a desire to knit the same one for myself. She is gentle, airy and very beautiful. The napkin has a square shape. You can safely decorate a table, shelf or chest of drawers with such a napkin. Also, by imposing such napkins and connecting them together, you can get a wonderful tablecloth, or a curtain.

In order to crochet a square napkin, you will need the following materials: plain cotton yarn, hook according to the thickness of the yarn, scissors. Although the napkin is square, it is knitted from the center in a circle. The following figure shows a pattern for knitting a napkin:

Pay attention to how the first row is knitted. You must first knit one st. s / 5n, then 2 tbsp. s / 2n in the third loop of st. s / 5n. Then 5 ch is knitted. So we repeat 8 times. In total, it will be necessary to knit 19 rows in a circle.

Crocheted square doily is ready. Before using such a napkin, it will need to be starched. So the knitted napkin will keep its shape better.

crochet

Three patterns with leaves that can be useful for crochet a variety of things. Take it to the piggy bank, who needs it.

Thin fiber is the best material for creating an airy beautiful lace fabric. There are many interesting models of clothes or interior decoration items that can be knitted from thin threads. Let's look at this issue in more detail.

In order to start the manufacturing process, you need to be well prepared. And for this you need to perform the following steps.

• Choose the right model.
• Select material and tool.
• Take measurements and build a pattern.

Reference! If you are not a professional needlewoman, then be sure to make a pattern and knit a sample pattern. This will not only avoid errors in the calculation of the canvas, but also help to avoid rework.

Which hook to choose

One of the most important points is the correct selection of the tool. It depends on the following factors:

• selected drawing;
• thread thickness.

The second point is of particular importance. To find out if this size is suitable, you need to fold the thread in half and compare its volume with the volume of the hook head.

Most manufacturers also place information on the preferred size on the label..

Another option is sampling. It is used when there are several yarn options and you need to choose one that is most suitable for creating a pattern.

Patterns for thin threads

For thin threads it is advisable to choose delicate openwork patterns. The most suitable options for such drawings are as follows.

Floral canvas

Shells and fans

Ribbon lace

Fillet knitting

Reference! In order to understand if the pattern you have chosen is suitable, knit a sample. You can make several elements with different patterns and choose the most suitable one.

Knitting ideas from thin threads

There are many options for models knitted from a thin thread. And contrary to popular belief, you can make from this material not only summer clothes, but also a winter version. It will depend on the seasonality of the material. For example, cotton for summer, and thin mohair or angora for smart winter attire.

This fiber is used to make wonderful decorative elements to create a cozy and warm atmosphere in your home. These are airy tablecloths, and small napkins, and even charming curtains for windows or doorways.

For adults

From this material, you can knit a lot of unusually beautiful new clothes for women's wardrobe. Airy, openwork items emphasize feminine charm and charm. Let's look at creating several variations with a detailed example.

On a summer evening

The weather of a summer evening is very deceptive: it seems to be quite warm, but a breeze blows up and brings with it the coolness of the night. This variation will serve as the best option for clothing for an evening walk.

Dress "Summer Zephyr"

The dress is made of cotton yarn with parameters 500 m/100 g and hook number 2.5.

Completing of the work

• Knit the required number of motifs for the upper part, connecting them when knitting the last row into a single fabric.

• Run along the bottom of the upper part of the belt.

• Make sleeves according to the same pattern: motifs, and the pattern of the bottom of the hem.
• Run the neckline according to the scheme.

For the cold season

From thin yarn, you can knit not only summer things, but also beautiful warm dresses.

Mohair haze dress

For the embodiment, you will need a thin mohair and a suitable tool.

Reference! For greater splendor, the skirt can be made two-layered. In this case, the bottom layer should be made of a contrasting material.

For a beach holiday

Going to the beach, we do not want to wear a lot of clothes. These flirty shorts will help you become a noticeable figure.

The variation is made of cotton.

• Make a pattern according to your size.
• Tie the strip with motifs.

• Run a belt along the top. To do this, tie several rows of CCH and, having folded half of this section to the wrong side, carefully sew. Insert a rubber band inside.
• Make a ruffle along the bottom.

For kids

By knitting a charming new dress for your fidget or princess, you will show your concern and desire to dress up your child.

Blouse "Summer lace"

Follow the pattern according to the scheme of the shelves, back and sleeves. Combine them into a single product. Tie the edges of the shelves with several rows of RLS. Sew a button and loop to the top of the shelves.

At the exit of your beauty, you can knit such a sundress.

Lace sundress

Scheme

T-shirt with a boat

Completing of the work.

• Tie in front of the product with a sirloin net with a wave and boat pattern.

• The back is knitted with a sirloin net without a pattern.
• Stitch shoulder and side seams.

Fine thread and crochet hook

Products from a thin thread are great for transforming the interior of a room. This is especially true for tablecloths and curtains.

Tablecloth

After manufacturing, produce a WTO product and, if desired, lightly starch.

For the kitchen, you can make such interesting curtains.

As you can see, thin threads do not limit the possibilities of needlewomen!

The statement that learning to crochet is easier than knitting is highly controversial. However, there is no doubt that the hook opens up many more possibilities. For many knitters, knowing how to crochet makes it much easier to get more of the work planned.

dense patterns

Despite the fact that crocheting is primarily associated with airy openwork, there are situations when a solid fabric is indispensable. In such cases, it turns out that it is not so easy to find with diagrams.

If you need to make opaque knitted items, you can use knitting needles, but this option is not always suitable. The fabric made with knitting needles is thinner and more elastic. In addition, knitting a thin thread tightly with this tool is very inconvenient and takes a long time.

What are dense ornaments for?

Based on practice, you can indicate the scope of solid patterns intended for crocheting:

1. Manufacturing of warm clothes. Winter hats, mittens, sweaters, dresses - all this should be connected without extra holes and lace.
2. Scarves. These clothes are listed as a separate item, since scarves need double-sided dense crochet patterns (diagrams are suggested below).
3. Interior items. rugs, some pillow models need a solid canvas through which the lining is not visible.
4. Swimwear and opaque items
5. In order to "dilute" the openwork pattern. Sometimes a combination of several rows of openwork mixed with a dense pattern allows you to create a new unique pattern.

The specifics of choosing yarn for solid patterns

Most types of yarn are suitable for crocheting tight patterns. The schemes are often designed for yarn with a thickness of about 350-400 m / 100 grams. This should be taken into account if the thread chosen for knitting differs significantly in thickness from this figure.

Too much will cause the canvas to become rough, overly dense and stiff. In addition, when knitting such products, a large load is created on the fingers and they can hurt. To avoid unpleasant consequences and still use a thick thread, you can use a large hook (7 or more) and try to knit freely.

A thread with parameters of more than 400 m / 100 grams is thin. For example, the thickness of mercerized cotton is 560 m/100 grams. Knitting solid patterns with such a thread requires the use of a very thin hook (from 0.9 mm) and tight knitting. Otherwise, the connected canvas will turn out to be openwork and will not fulfill its function.

Crochet: dense patterns. Must-have schemes

Elementary solid patterns are formed by combining different columns. This can be a traditional smooth surface, including single crochets (RLS) or double crochets (CCH). A feature of such patterns is the absence of air loops (VP). An example is the ornament in the photo below.

It consists of "bushes" and rows of RLS separating them. The given sample is made in color, but more often it is used in a single-color version. It can be called a lifesaver of many knitters.

And in this modified pattern there are already VP and an element of openwork.

This scheme can easily be adapted to obtain a dense web. It is enough to replace the VP with the SSN, then the “leg” for the bush will contain not three SSNs and five VPs, but eight SSNs.

Dense crochet patterns, the patterns of which are presented below, are also based on CCH. This technique allows you to create a really dense canvas. The essence of the method is that not the upper part of the column of the previous row, but its main part is used as the basis for volumetric CCHs. The hook is wound behind the CCH and the thread is pulled behind it.

This is how convex CCHs are knitted.

Zigzag dense crochet patterns: description and diagram

Wavy patterns are very convenient for making solid webs. Similar ornaments are formed according to the same principle: adding loops at the peak of the wave and reducing the same number of loops at the bottom. Zigzags have their own specifics and features:

• Zigzag dense patterns are difficult to cut, they create difficulties when knitting according to a pattern (sleeve rounds, necklines, relief for the waist). Waves are best suited for knitting flat fabrics.
• For the correct calculation of the loops, you need to knit a rather large sample, since the wavy pattern is fully formed after knitting about 5 cm of the fabric.
• It is necessary to strictly observe the number of added and reduced loops in each row. Ignoring such calculations leads to a gradual change in the proportions of the wave.

Wavy dense crochet patterns, diagrams and a sample are shown below, may be with minor holes in the canvas (as in the diagram).