How to clean a silver ring with a stone. How to clean a silver ring with improvised means

Nowadays, many women wear silver jewelry, which is undeniably pleasing to the eye. But for some of them, small, easily fixable troubles can occasionally occur - the products can darken. In this article, we will share effective and efficient recommendations on how to clean blackness from a silver ring at home.

Why does silver turn black?

There is an interesting fact proven by scientists:

• if nitrogen prevails in the human body, then silver products darken less often;
• if it has a large amount of sulfur, then darkening occurs much more often.

Important! Often a similar reaction is caused by creams or lotions, which include sulfur.

Before taking a bath or washing dishes, you should definitely remove silver jewelry, because due to high humidity, mold can appear on the metal surface. You should also avoid storing jewelry in places with high humidity.

Where to clean silver?

The most effective way to get rid of blackening is to have your jewelry cleaned by a specialist in a workshop or purchase a jewelry liquid for cleaning the alloy. However, such procedures require significant financial investments.

There are also several effective homemade and low cost methods for cleaning silver. After using folk methods proven over the years, your products will look like new and shine, as if they were just from a jewelry workshop.

Important! If your products have inserts made of amber, pearls or coral, then these products should be given to a jeweler for cleaning. These stones are very delicate and capricious, they are easy to spoil.

How to clean silver earrings at home? - 8 useful tips

If your silver jewelry is slightly soiled, then it is worth just holding it for a little in a hot soapy bath. You can use dish detergent to prepare the cleaning solution. After a short soak, clean the product with a soft toothbrush and rinse in cold clean water.

Important! This process will not make the jewelry shiny, but it will help remove all the dirt from the surface of the jewelry.

If there are no stones in the products, then it can be easily cleaned and brightened by immersion in a 10% solution of citric acid or ammonia, which should be well heated for best effect.

An excellent folk remedy for cleaning silverware is obtained from potatoes:

1. Grate raw potatoes and cover with cold water.
2. Dip your silverware into the mixture for a few minutes.
3. Then carefully rub the jewelry to a shine with a piece of dry and clean flannel or wool.

To use the following method, we prepare the following: soda, salt (it doesn’t matter which one is large or small), any dish detergent and a container.

What to do with all this to clean the silver ring from blackness at home:

1. We lay your jewelry in an even layer on the bottom of the container, pour salt and soda in equal proportions, add a few drops of detergent and pour all this with boiling water.
2. We wait 10 minutes, rinse all items with cold running water and wipe with a dry and soft woolen or flannel cloth.

To clean the blackening of silver inserts on your products at home, you will be helped by an ordinary clerical, light (it is less abrasive) eraser, and a little of your human effort.

Wipe the silver inserts with an eraser and the blackness on them will disappear with incredible speed.

The following method is considered the most effective, but also the most aggressive:

1. We take tooth powder or paste, add baking soda and ammonia.
2. Mix until smooth and use a soft toothbrush to apply the mixture to objects.
3. Let stand for a while and rinse with running water at room temperature.

Important! This composition removes blackness from silver products well, but it is often not recommended to use it, as it can provoke damage to the metal - microcracks may appear. Also, for a more delicate cleaning from the composition, you can remove soda from the composition.

For effective cleaning of small silver items, you can use a mixture of chalk and ammonia. It is applied to the product with a soft toothbrush, and then washed off with running water.

One of the most unusual ways is to drink Coca-cola:

1. Pour it into a saucepan, bring to a boil, put your decorations there and “cook” for about 10 minutes.
2. Then we take out the jewelry, rinse it with clean running water and wipe it with a piece of soft and dry cloth.

Important! Filigree or blackened silver items should not be fanatically cleaned of blackening. The noble patina gives them a special chic and sophistication.

How can you clean silver with stones?

Silver products with stones are best cleaned with special liquids sold in jewelry stores. Such compounds will not only not harm your favorite jewelry, but also cover its surface with a protective film.

Silver inlaid with stones can be cleaned at home without resorting to the services of a master jeweler, using the following method will help you:

1. Add shavings of laundry soap and a few drops of ammonia to the water.
2. Bring the resulting composition to a boil, but do not boil.
3. Using a soft toothbrush, apply the cooled composition to the item you need and clean it.
4. Clean around the stone with a cotton swab dipped in the same solution.

Important! If you are going to clean matte silver at home, then in no case do not use abrasive products - soda, salt or acids. A sufficient and effective means for cleaning matte products is soap shavings dissolved in water.

1. Try to wash products more often, preventing plaque from accumulating on their surface.
2. After cleaning, silver items should not be put on immediately, but they should be allowed to lie down for several days to allow a natural protective layer to form on them. Or at the master jeweler to cover them with a special varnish.
3. Never use harsh abrasives for cleaning.
4. To avoid scratching products, use only soft toothbrushes for processing.
5. After cleaning, be sure to rinse the product with running water.
6. You need to dry the products on laid out paper napkins or with a hairdryer.
7. After cleaning, it is recommended to polish silver items with pieces of dry and clean

Over time, precious metal products lose their attractiveness, but not everyone knows how to clean gold at home and not damage its surface.

Why do jewelry need cleaning?

It is known that gold in its pure form is quite soft, therefore, in the manufacture of jewelry, an alloy is added to it, including:

• silver;
• zinc;
• copper;
• cadmium;
• other metals.

Due to this, over time, an oxide film forms on the surface of the ring, for example, the jewelry looks dull. Other causes of pollution are:

• dust that is present in the external environment;
• used decorative cosmetics;
• products of the sebaceous glands.

Knowing how to clean gold at home, it will be possible to improve the appearance of the product, it will look like new. In addition to being unsightly, dirty jewelry, such as earrings, can lead to the development of an inflammatory process in the earlobe. Therefore, knowing how to clean gold at home, you can save yourself from possible troubles in the future.

Caring for your gold jewelry

In order not to return to the question of how to clean gold jewelry in the future, it is advisable to adhere to competent care for them:

• it is necessary to protect products from exposure to acids and alkalis (in particular, laundry detergents, solvents, some cosmetic preparations);
• it is recommended to remove accessories before working with cleaning agents (especially abrasives), paints and varnishes;
• when visiting a solarium, sauna, bath, it is recommended not to wear gold jewelry;
• do not store precious metal products in cardboard boxes (the material contains sulfur, so the jewelry may darken);
• you need to know how to clean gold.

The subtleties that you need to remember when choosing a way to quickly clean gold:

1. In many products (including rings) there are places that are difficult to process (various patterns, ornaments, inserts). Cleaning gold at home does not allow you to get the desired result, so it is recommended to use a toothbrush, removing the product, followed by rinsing the product with water.
2. You should choose dishes in which the solution intended for cleaning would cover the products completely.

Using improvised means

How to clean gold earrings often depends on the type of contamination. Copper under the influence of moisture, oxygen from the air leads to the appearance of green or black spots on jewelry. To avoid damage to jewelry, cleaning gold at home should be carried out in several stages:

1. Washing (soap solution is prepared, gold items are lowered into it and left for 2 hours). If, after rinsing with clean water, it is clear that the cleaning solution has successfully completed the task, no further steps are required.
2. Dry cleaning (the oxide film is removed, for example, from the ring, with an ammonia solution, its optimal concentration should be 25%). The product is placed in a small container, products are immersed there for 3 hours. After the specified time has elapsed, the jewelry must be thoroughly rinsed under running water and dried.
3. Mechanical cleaning is used if the desired result was not obtained using chemical treatment. How to clean gold at home at this stage? You can use a paste, the purpose of which is to clean jewelry.

Using a piece of fleece, a special gold cleaning paste is applied to the jewelry, then it is removed with alcohol, and the product is washed under running water and dried.

How to clean white gold at home? To give a white color to the product, the alloy contains nickel. You need to know what can be used to clean gold at home and not damage the jewelry. For this purpose, a tool is used, including:

• 1 st. l. detergent;
• 100 ml of water;
• 100 ml of ammonia.

The prepared product is poured into the container and white gold jewelry is placed in it for 1.5 hours. After that, the jewelry is washed with water and dried thoroughly.

Cleaning gold jewelry will restore the appearance of products. It is recommended to mix beer (1/2 cup) and 1 egg yolk. The resulting product is applied to the decoration with a piece of fleece.

Not everyone knows how to clean gold at home quickly and efficiently. The easiest way is to use a dishwashing detergent. Would need:

• cold water - 200 ml;
• detergent - 1 tsp.

The detergent dissolved in water is poured into a small saucepan, putting gold items, put the container on fire, boil for 10 minutes. After cooling, the jewelry is thoroughly wiped with a towel.

Cleaning jewelry with stones should be done with great care. For example, bracelets with glued stones are not allowed to be immersed in soapy water. It is wiser to use only a cloth soaked in the solution when cleaning the surface of the jewelry. Vinegar should not be used: 375 gold can damage it.

It happens that a drop of iodine, accidentally falling on a gold bracelet, leaves a dark spot. The mood is spoiled, and I want to quickly find a way to clean gold from iodine. You will have to go to the pharmacy and buy sodium thiosulfate (its other name is hyposulfite). Dissolve 1 tbsp in 200 ml of water. l. funds and lower the decoration for 30 minutes.

Ultrasonic cleaning is performed by craftsmen in jewelry workshops. This method brings back a bright look and beauty to the jewelry.

Precious stones (for example, diamonds) experts advise cleaning regularly, there is even a rule: once a month. When a film forms on the stone, it loses its attractiveness and no longer plays with light as before.

How to properly clean gold jewelry with diamonds? Ammonia (a few drops) is added to 200 ml of water, the decoration is placed in the prepared solution and left for 30 minutes. After washed and dried.

Bring back shine to jewelry

The question of how to clean gold at home and restore its shine is of concern to many. There is an easy way:

• water - 200 ml;
• baking soda - 2 tbsp. l.

Soda is added to preheated water, foil is placed on the bottom of the saucepan, chains and other decorations are placed on top and the prepared liquid is poured. It is advisable to leave for 12 hours, then rinse the jewelry thoroughly under running water and dry.

You can clean gold to restore lost luster. It is enough to prepare a solution of sugar (1 tablespoon) dissolved in water. Jewelry is immersed in the prepared substance and left in it for 4 hours. After that, the products are washed with water and dried.

How to clean a gold ring and make it sparkle? It is recommended to prepare a composition including:

• water;
• soap shavings;
• petrolatum.

The cleaning composition is applied with a piece of cloth to the product with light rubbing movements. Then the jewel is washed and dried.

Another method tells how to quickly clean gold (provided that there are no inserts in the jewelry, which can be highly sensitive to chemicals). To 200 ml of water add 2 tbsp. l. hydrogen peroxide, 3 tsp. ammonia and a little shampoo. Jewelry placed in a cleaning solution for a few hours will look new and shiny afterwards.

How else can you add shine to jewelry? With onion juice or lipstick. You can use soda or mustard powder, but it is not recommended to use them: they can leave micro-scratches on the surface of gold objects.

Some cosmetic products containing mercury can pose a danger to jewelry: when interacting with them, gold can turn white, and its fragility will increase.

Proper and regular care, cleaning gold at home give jewelry a beautiful look, they will last a long time and will always look perfect.

Although silver jewelry is not as expensive as gold, it has its own charm. More feminine and delicate accessories attract a large number of young girls, so a huge variety of rings and earrings are sold every year. However, this precious metal has one unpleasant feature - it quickly tarnishes and even darkens. That is why it is worth learning how to properly clean a silver ring from blackness in order to return the jewelry to its original beautiful appearance.

There are many homemade ways to restore the attractiveness of silver rings, which can be applied quite simply. This article will talk about how to clean a silver ring at home without much effort and time.

Causes of plaque

Silver is not only a beautiful precious metal, products from which can be purchased at a fairly low price, but also very useful. It has special healing properties that help kill harmful bacteria. However, due to plaque, rings lose not only their beauty, but also their usefulness, and therefore it is very important to know how to clean a darkened silver ring.

Some of the most well-known reasons why silver jewelry can tarnish include:

1. Close contact of silver with sulfur. During their chemical interaction, a new substance called silver sulfide is released. In appearance, it resembles a certain analogue of black rust. However, at the same time, silver does not allow sulfide to penetrate inside, and therefore it is quite simple to clean it from blackness.

2. In addition to sulfur, water and cosmetics can also damage silver, which affect the noble metal in domestic conditions. Even profuse sweating can affect the beauty of the product quite a lot. That is why it is important to know how to clean a blackened silver ring.

Silver, no matter how you take care of it, will still tarnish after a while, it's just that the higher the fineness, the longer it will take. However, it is still best to remove any silver rings while bathing and washing clothes to prevent harmful contact.

Cleaning methods

If you have a question about how to clean a silver ring at home, then you can use one of the tips below. Most often, simple dirt appears on jewelry, which is quite easy to deal with. Now many jewelry stores sell special substances that are designed specifically for cleaning silver items, as well as polishes for them. Using them is quite easy, the main thing is to keep the rings in the product for the right amount of time, and then do not forget to wipe with a napkin.

However, if you do not want to spend extra, but are still interested in how to clean a silver ring, then you can use improvised means.

Laundry soap

Normal stains are fairly easy to clean with standard, inexpensive soap. In order to clean the silver ring well at home, you should take a piece of laundry soap and a grater. It is necessary to rub a small amount of soap shavings, and then heat the soap in a water bath to a liquid state and dilute with a small amount of warm water. The silver ring should be placed in the resulting mixture for 10 minutes. At the end of this time, you should remove the jewelry and clean it with a toothbrush. The movements should be soft so as not to scratch the surface of the metal.

Potato

If you are wondering how to clean a silver ring in other ways, but without using chemicals, then an ordinary potato can come to the rescue. This vegetable is a folk remedy that helps fight the blackness and darkening of the noble metal. To use the method, you simply need to take an ordinary raw potato, peel it, and then grate it to a gruel state. The mixture will turn out similar to the one used for making potato pancakes. After that, the potato mixture should be diluted with a small amount of warm water, mix everything and immerse the silver ring in it. To be effective, it must be at least one hour, but in this situation, the longer it is there, the easier it will be to get rid of plaque.

After the ring has been removed from the potato gruel, it should be polished with a soft cloth to the desired shine. If the potato did not help restore the product to its original form, then you will have to use more serious methods.

Toothpaste or powder can be an effective solution for those who are wondering how to clean a silver ring. However, they should be used with great care, because the substances contained in the toothpowder are abrasive and can damage the precious metal. Yes, it will be possible to get the jewelry cleared of blackness and plaque quite quickly and efficiently, but in the end you can get a few ugly scratches on the product, which will only spoil the appearance of the ring. The paste, due to its soft texture, will be much less dangerous in this situation, however, the effect will be less.

To clean silver with toothpaste, apply a small amount of the substance to the ring, and then spread it all over the product. After that, you should leave it for an hour, and after that start direct cleaning. To do this, take a soft cotton cloth, with which you need to start polishing the ring. As soon as you achieve the desired result, you can rinse the accessory under running water to get rid of the remaining toothpaste, and then wipe it dry again.

The most famous way to clean a silver ring yourself at home is a recipe with ordinary baking soda, which can be found in any kitchen. For use, the first step is to make a gruel - a small amount of soda should be diluted with clean warm water to obtain a mixture that resembles a paste in consistency. The paste is applied to a cotton pad or soft natural cloth, after which it is used for polishing.

You should be very careful about the cleaning process - all movements should be very gentle to prevent scratches. After the end of the procedure, the silver ring is washed with plain water, and then rubbed to get rid of excess moisture.

If you do not want to use the methods listed above and are interested in how else you can clean your silver ring, then take ammonia. This method is considered one of the most aggressive, and therefore everything should be done quickly and gently. To get a good result, you should take the ring and dip it in ammonia for a period not exceeding 5 minutes. After that, you should immediately start washing the product under normal running water until the smell of ammonia completely disappears. Then the ring is wiped with a cloth from excess moisture.

Another interesting way to get rid of plaque is the most famous drink in the world - Coca-Cola. To do this, it should be poured into a regular saucepan and put on the stove to heat up. The ring should lie five to seven minutes in the cola while it simmers. After that, the product must be removed and washed in warm water, and then dried thoroughly.

Lipstick

Women may be attracted to the possibility of using boring lipstick as a cleaning agent. If the color is no longer attractive, but you just don’t want to throw it away, use lipstick to return the silver ring to its former splendor. To do this, apply a small amount of it on a regular cotton swab, and then use it to rub all sides of the ring until a shine is obtained on the product. You need to wash off the lipstick with a regular soapy solution - this method will be the most effective.

Cleaning silver rings with stones

Cleaning ordinary silver rings is quite simple even at home, however, if the product has stones, then everything becomes more complicated, because you need to take into account how the insert will react to the cleaning agent. However, since expensive stones are almost never inserted into silver jewelry, which have a fairly low price, you need to focus on the rules for cleaning soft stones.

Cleaning a silver ring with cubic zirkonia is quite simple if you know how the density of the stones differs, and what exactly are the cleaning rules. The following methods should be followed:

2. Opals, moonstones, turquoise and malachite are best cleaned with laundry soap.

3. In no case should items with pomegranate, ruby ​​or topaz be heated or immersed in hot water.

However, it is best to take such jewelry to the salon for cleaning or buy a special ultrasonic bath. The same applies to those rings that have an insert of organic origin, such as coral or amber. They are extremely whimsical, and the alkaline environment can completely destroy all the beauty of the accessory.

Storage rules

To prevent the need for a new cleaning, you should follow a few rules for the care of rings and other silver jewelry. These include:

1. Be sure to remove the rings during physical training, as there is a lot of sweat.

2. Do not allow silver to come into contact with cleaning products or boiled eggs.

3. Store your silver rings in dry places where they cannot come into contact with water. The ideal place for this would be caskets. If you rarely wear jewelry, then as an additional means of protection, you can wrap it in a regular napkin and then foil. This must be done for each accessory separately in order to prevent their contact.

In addition, to reduce the humidity of the environment, it is advisable to put absorbent bags in the jewelry box. They can be easily found in shoeboxes when buying a new pair. So instead of just throwing them away, take advantage of their useful properties.

Conclusion

Silver, although it belongs to the category of precious metals, is much less durable than gold or platinum. That is why it should be carefully looked after to prevent the appearance of blackness or plaque. Asking in advance the question of how to clean silver rings or earrings, it should be understood that the cleaning procedure itself must be carried out carefully, but at the same time very gently. Self-cleaning can lead to scratches on the product, which will greatly spoil its appearance and drop its value, and therefore you should not take the first product that comes across and apply it immediately, without observing the existing rules.

Cleaning silver with stones at home is an easy task. You can return the product to its original appearance even without contacting a jeweler. It is not necessary to buy expensive products, because folk methods for cleaning silver are no less effective.

Why silver things turn black

Silver is easily oxidized, this feature is inherent in the metal. If the proportion of silver in the alloy is small, then the jewelry will blacken very quickly. This happens as a result of a chemical reaction.

In addition, rings and chains, pendants and earrings made of silver turn black when exposed to moisture. The highest quality jewelry is considered to be made from 925 samples. They fade less often and are more durable, so when buying it is important to pay attention to the quality of the alloy.

Preparing items for cleaning

First you need to remove the dirt and grease residues that are present on the surface of silver jewelry. There are several ways. You can wash rings and earrings with soap, a liquid concentrate works well. You can also use diluted dishwashing detergent or shampoo. Dirt must be removed necessarily, because this will make the cleaning process more easy. It is enough to put the jewelry in the solution, and then hold it there for several minutes.

All hard-to-reach places should be brushed with a toothbrush, but care must be taken to ensure that the bristles are soft. After the cleaning process is completed, the items must be thoroughly rinsed in clean water.

How to clean products

There are many options for how to clean silver with stones at home using improvised means. It can be ammonia, in a 10% solution of which jewelry is soaked. In another case, you can soak a cotton wool in ammonia, and then wipe the surface. But this method cannot be used if the jewelry is with pearls, because the color of the pearl will change. But silver with stones in this way will be cleaned very quickly.

There is another option. It consists in cleaning items with a special solution that is made at home. To do this, combine hydrogen peroxide and liquid soap in a container, and then add ammonia. All ingredients should be thoroughly mixed.

The soaking time must be chosen individually for each decoration, because the degree of contamination may be different. After using the solution, the objects must be rinsed, and then wiped thoroughly with a soft cloth.

Every housewife has citric acid. With its help, dark plaque will come off very quickly. Take an enameled dish, place a copper wire in it and pour in citric acid. For 1 liter of water you need to take 200 g of acid. Put the dishes on the stove, dip the rings into it, boil it for a quarter of an hour. Rinse items and wipe dry.

Clean items with soda, 2 tbsp. l. pour in 0.5 liters of water. Put the solution on fire. When the water boils, put a piece of foil and decorations into the container. It only takes a few minutes to see great results.

There is another version of the solution. In 1 liter of water, mix soda, salt and dish detergent, taking 1 tbsp of each ingredient. l. Place the silver in the solution and boil for 30 minutes.

Before and after cleaning

You can clean things from blackness if you put gruel on them, it is made from soda. You need to clean with a soft cloth until the shine returns to the decoration. Hard-to-reach places can be cleaned with a toothbrush.

A decoction of potatoes has proven itself well, it will help restore shine even to very dull objects. Place a piece of foil in the water left after boiling the potatoes. Immerse silver with pearls in water, hold for 10 minutes. In addition to potato broth, you can use the water in which the eggs were boiled.

Perfectly cleans metal toothpaste and toothpowder. But this method cannot be used for products with patterns or stones. If you want to quickly rid silver items of plaque, buy special napkins. They are available in jewelry stores.

Any silver products fade, oxidize and blacken over time. Especially when it comes to jewelry made from alloys of this noble metal, which are constantly in contact with human skin. Therefore, it will not be superfluous to consider various options for how to clean a silver ring, and learn how to put them into practice correctly.

Read this article:

Ways to quickly clean the ring

What you often encounter when wearing a silver ring on your hand all the time is household pollution. Dust, soap, hand cream, food particles, etc. clog into the recesses of the relief pattern on the ring, which significantly spoils its appearance.

Dealing with this problem is very easy. You need to immerse the jewelry for a few minutes in a soapy warm bath, and then gently go over all the edges with a soft natural bristle toothbrush. With the same success, any dishwashing detergent will help to quickly clean silver from surface contaminants.

If the metal has already begun to darken a little, the solution to the problem of how to clean a silver ring at home will have to be sought in other options. For example, a warm bath of 10% solution of ammonia and citric acid cleans blackness well and helps to cleanse silver jewelry without stones.

Without any chemistry

Trouble-free old-fashioned silver cleaning methods are simple and always available. For example, raw potatoes brighten well and remove oxide from the surface of silver products.

Remove the peel from the vegetable, wash, rub on a fine-mesh grater. Water is added to the potato pulp. Any silver items (cutlery, rings, chains, earrings) are immersed in this solution. As an option - immerse silver in a hot decoction of potato peel.

After 30 minutes, the products are taken out, washed well under running water, wiped and polished with a velvet or woolen cloth. Shine, complete absence of dirt and blackness on your favorite rings are guaranteed!

A similar effect can be achieved if silver rings are boiled for several minutes along with egg shells or garlic husks. The only condition is that the jewelry must be without stones.

Toothpaste

Most often, in response to the question of how to clean a silver ring at home, you can hear: “Tooth powder or paste.” The composition of the tooth powder includes substances that have good abrasive and whitening properties, so any contamination from the metal surface is removed perfectly. Toothpaste works similarly, but more delicately.

To quickly remove oxidation products from silver, you need to moisten in water and generously sprinkle the product with toothpowder. Then proceed to cleaning, using a brush with soft short bristles or a velvet cloth. After thoroughly rubbing all the darkened and contaminated areas, the remnants of the tooth powder should be washed off with cool water. Wipe the decoration dry with a cotton cloth.

Toothpaste should be used in the same way. But in order for the procedure to be more effective, it is recommended to apply the cleaning composition to the jewelry and leave it in this form for 35-50 minutes. Then move on to cleaning.

Baking soda

It is not so easy to remove dirt on a ring with a relief pattern or engraving by conventional methods. This is where baking soda is needed, which has excellent fat-dissolving and cleansing properties.

Option 1. A pasty slurry is made from soda and a few drops of water. A small amount of the composition is applied to a cotton pad and the product is cleaned thoroughly, but without strong pressure. When the ring becomes shiny again, it is washed, dried and polished with velvet.

Option 2. To complete the task, you will need a teaspoon of soda, the same amount of salt (coarse-grained rock or "Extra"), any liquid dishwashing detergent, water, aluminum foil, a saucer.

You need to cover the saucer with foil, put silver jewelry in one layer. Sprinkle on top and evenly distribute salt and soda. Drop some detergent. Boil water, pour silver. After 10-15 minutes, jewelry can be removed - there is no trace of blackness and dirt even in the most inaccessible places.

How to completely remove blackness from a silver ring?

Strongly blackened silver will help bring back to its original form a highly effective composition, which includes three components: tooth powder (paste), soda and ammonia, mixed in equal proportions. The mixture is applied to the silver jewelry with a toothbrush or cotton napkin. Wash off with cool water.

The mixture is quite aggressive, therefore, when working with it, hands must be protected with rubber gloves. It is often not recommended to use this method, since microcracks may appear on the silver under the action of abrasive particles. For a more delicate cleaning, you can not add soda, using only ammonia and toothpaste.

Only classic white toothpaste can be used to polish and brighten rings or silver earrings, without any additives. Popular transparent or colored gels are not suitable for these purposes.

How to clean silver rings with stones?

Silver jewelry encrusted with semi-precious stones is recommended by experts to be cleaned with special products that are sold in jewelry stores. But not always and not everyone has the opportunity to acquire such funds. You have to look for alternative ways.

At home, you can clean a ring with a stone from blackness with a 10% solution of ammonia and laundry soap. The soap is rubbed on a grater, an aqueous solution of ammonia is added to it. The mixture is heated to 85-90 degrees, cooled slightly and applied to the ring with a toothbrush. The inlaid areas and the place of attachment of the central stone are treated with a cotton swab dipped in a cleaning solution.

Silver items with precious and semi-precious stones are best cleaned with a weak solution of ammonia (5 drops per 150-200 ml of water). It is enough to apply a little liquid on a cotton napkin and wipe the ring with cubic zirconia or another stone. You don’t have to worry about the safety and strength of fastening stones - ammonia is not afraid of them.

It is better not to clean silver jewelry with pearls, amber, corals on your own. The composition of these semi-precious stones contains organics that are sensitive to the effects of aggressive chemicals and environments. In order to avoid unpleasant consequences, it is advisable to give jewelry with such stones for cleaning to a jewelry workshop.