home › Money › Intarsia technique. Intarsia with knitting needles - diagrams: where to find and how to build

Intarsia technique. Intarsia with knitting needles - diagrams: where to find and how to build

Using the intarsia technique, you can knit real works of art, various complex patterns, change the color of the thread not only horizontally and vertically, but also diagonally at different angles. Moreover, when changing colors, both threads cross on the wrong side of the product, and at the same time, the knitted fabric remains as elastic as when knitting it with a regular front stitch. This article will help you figure out how to properly master knitting in this technique.

Frequently asked questions that you will have:

How to work according to the scheme?

Each cell of the scheme corresponds to the width of one loop. In the front row, the corresponding row of the scheme is read from right to left, and such a number of loops are knitted with a thread of the same color as there are cells in width. In the purl row, the diagram is read from left to right. In order to facilitate the work on the diagram, most often, the colored sections of the model are given on the diagram in color.

How many balls of yarn will be required to complete the product?

If a new colored area starts from the right or left edge, then a new ball is used for this colored area. If, a new colored area starts in the middle of the product, then two additional coils should be used, namely, the first one for the "new" color, the second one for continuing work on the "old" color.

How to start working with a new ball?

If you start with a new ball in the middle of the row, then an ugly hole may form in this place, and the first loop of the new color will turn out to be very fragile. It will unravel over time! To avoid this, both threads (one for intarsia - the other for background) must be inserted to work in the right place, but a row earlier!

How to cross threads?

When changing colors, both threads are crossed on the wrong side of the work, so that holes do not form.
In the front row, loops are knitted with the first colored thread, put on top of the second thread and then knitted with the second thread.

In the purl row, the corresponding loops are also knitted with the first colored thread. Put the second thread on top of the first and then knit with the second thread.

If the crossing occurs vertically (either to the right or to the left by one loop), then short uniform segments of threads will form on the wrong side.

If there is an oblique crossing (i.e., a few loops to the right or left in each row), then the threads pass along the wrong side of the work to the next colored section.

In the process of assembling the product, it is necessary to sew all the ends of the threads on the wrong side at the places where they cross. At the same time, individual holes between the loops are removed.

How to avoid tangling threads from different balls?

After each knitted row, turn the yarn alternately, then to the left, then to the right. If we knit a very multi-colored intarsia, then it is more convenient to use a separate unwound ball of yarn for each colored section. It is not necessary to knit from a whole working ball, because due to the twisting of the threads, knitting will become impossible or very tiring.

Handicraft stores sell special spools for unwinding a small amount of thread. You can buy several plastic spools and, as needed, wind the necessary thread on each of them.
You can build your own reels out of cardboard.

And you can simulate coils. Making it look like a coil is as easy as shelling pears: you need to leave the long end of the thread and wrap the required amount of thread in a “figure eight” around the thumb and little finger. Then cut the thread and use this cut end to knot the center of the spool. For the long end we pull the thread from the middle of the coil. As the threads are pulled out of the spool, the knot tightened around it loosens, it must be tightened so that the twisted spool does not unwind.

How to knit a pattern symmetrically?

In some cases, it is necessary to knit the pattern on the back symmetrically to the pattern on the front of the product so that when making the shoulder and side seams and subsequent assembly, the colored parts match exactly.

To do this, you need to start knitting according to the pattern, adhering to the rule: You need to start work from the front row, but read the 1st row of the pattern - from left to right ..., and the 2nd row (wrong side) - from right to left.
So you will achieve the symmetry of the pattern, both on the back of the product and on its front.

Change colors in horizontal and vertical lines

Different blocks of colors are knitted from individual balls or bobbins. There are no broaches on the wrong side of the canvas. At each color change, the threads are twisted to prevent holes in the knitted fabric.
The intarsia technique cannot be worked in a circle, since at the end of the row the threads will be in the wrong position. You will have to cut off all the threads each time and reattach them. As a result, many thread ends will appear on the wrong side of the fabric.

Changing colors in a vertical line, the threads must be twisted in each row. Changing colors in a diagonal line, the threads should be twisted in every second row. If the diagonal is tilted to the right, twist the threads only in the front rows. If the diagonal is tilted to the left, twist the threads only in the purl rows.

Knitting from several balls

In order for such a trick to "work", the ends of the threads are pulled out from the middle of the balls so that the latter do not spin in the package.
The balls of different colors are laid out in a bag in accordance with the sequence of use when knitting. As many holes are made in the bag as the balls are used. The ends of the threads of the balls are pulled through the holes. The picture shows a sample connected from three balls in the package. The threads from the bag are pulled parallel to each other and do not twist.

Color change in vertical line
	1. Front row. Leave the thread of the old color at work. Pick up the new color thread from under the old color thread and knit it until the next color change.
	2. Purl row. Leave the thread of the old color before work. Pick up the new color thread from under the old color thread and knit until the next color change. Repeat steps 1 and 2.
Color change in a diagonal line
	1. Working diagonally to the right, on the right side, insert the thread of the new color over the thread of the old color and knit until the next color change.
	2. On the wrong side, insert the thread of the new color from under the thread of the old color and knit until the next color change.
	1. Working diagonally to the left, on the wrong side, insert the thread of the new color over the thread of the old color and knit until the next color change.
	2. On the right side, insert the thread of the new color from under the thread of the old color and knit until the next color change.

Entering a new color

Entering a new color: method 1
	1. Grab the old thread first and then the new thread, as in knitting, and knit the first loop with both threads.
	2. Leave the old thread. Knit the next two loops with both ends of the new thread.
	3. Leave a short end of the new color and continue knitting with one thread. On the next rows, work three double stitches as single stitches.
Entering a new color: method 2
	1. Cut off the old thread, leaving about 10 cm. Purl with the new thread the first two loops * Insert the needle as in purl into the loop, put the short ends of the old and new threads on the knitting needle and knit the next loop under the short ends.
	2. Leave the loose ends hanging and purl the next stitch over them.
	3. Repeat from * until you have interlaced the short ends on the wrong side of the piece.
Entering a new color: method 3
	1. Knit up to three loops in front of the insertion of the new color. Knit these three loops with a thread folded in half, making sure. that the thread is enough for just three loops.
	2. Thread the new thread into the resulting loop from the old thread, leaving the new thread double for about 20 cm. Knit new three loops with double thread. Leave the short end of the new thread and continue to knit with one thread.
	3. In the next row, transfer the first thread along the wrong side from the place where it was left in the previous row, and twist it with the second thread. Knit double loops with single ones.

Horizontal stripes. Change thread color along the edge

Horizontal stripes are one of the easiest color knitting options because you don't have to pull the threads along the row. You can cut the thread when you are finished knitting the strip, but this means that you will have to weave in a lot of ends after the part is completed. To avoid this, pull along the edge of the canvas those threads that are temporarily out of work.
When knitting an ornament in straight and reverse rows, its width should be determined by an even number of rows so that the free ends of the threads are located only to the right of the first loop of the front row. Otherwise, as necessary, the threads will have to be cut off and connected from the opposite side.

When knitting the part in the round, the number of rows in the strip does not matter, since you always knit the front rows.
When you introduce a new color and purl the stitches, a beautiful, clear line is not formed on the canvas that delimits the colors. To avoid this, knit the first row with a thread of a different color with facial loops.

Vertical stripes. Set of loops

The technique of making a fabric with vertical stripes involves knitting with or without broaches on the wrong side, when each strip has its own ball.
It is advisable to use the first method for narrow strips (up to 4 loops), the second - for wide ones.
If you want the stripes to start at the bottom edge of the piece, cast on the stitches as shown below.

Corrugated elastic band

Corrugated two-color elastic band 1 x 1 or 2 x 2 is an elastic band in which the front loops are knitted with a thread of one color, and the wrong loops are of another.
The pattern forms a canvas with an interesting texture, which largely loses its elasticity due to the large number of broaches.

	1. Front row, changing threads at work. After knitting 2 facial, put the thread aside. From under it, take a working thread and knit 2 purl.
	2. Set aside the thread before the front loop. From under it, take a working thread and knit the next 2 loops with facial ones.
	1. Purl row. change threads before work. After knitting 2 purl, put the thread aside. Take a working thread above it and knit 2 front loops.
	2. Set aside the thread before the purl loop. Take a working thread above it and purl the next 2 loops.

You see what wonderful work can be knitted in this technique, so master and try. I hope that all the peppercorn materials will help you with this. Good luck to you!!

Intarsia - a simple knitting technique
Even the simplest geometric patterns become much more interesting when knitting with yarn of different colors.

And who among you was not delighted with knitted patterns that looked like colorful canvases of real paintings? It seems that the artist took it and painted his picture directly on the knitted product.

The secret is that such “works of art” are knitted using a very interesting and rather easy-to-learn technique - INTARSION. The technique of intarsia was created precisely in order to simplify the knitting of multi-colored patterns.

This technique can be used both for hand and machine knitting (using a special carriage).

Intarsia are colored sections of a knitted fabric, which are most often connected with the front surface (less often they can be connected with other patterns) according to a certain pattern.
In contrast to the jacquard knitting technique (which it can sometimes look like visually), in which one of the threads runs along the wrong side of the product (sometimes leaving very long broaches).

When knitting using the intarsia technique, BOTH threads are crossed on the wrong side of the product when changing colors, adhering to certain simple rules.

If you describe the technique approximately, it looks something like this - the “old” thread is temporarily not involved in the work, and the work begins to continue with the “new” thread ... What is also important to note is that the knitted fabric remains as elastic as when knitting it with a regular facial stitch.

Even patterns designed for knitting in the traditional way, with broaches, are much easier to do with intarsia.

Since when using this technique, there is no need for such broaches, the inside of the knitted fabric will look much neater.

Each cell of the scheme corresponds to the width of one loop. In the front row, the corresponding row of the scheme is read from right to left, and such a number of loops are knitted with a thread of the same color as there are cells in width.
On the wrong side, the pattern is read from left to right.

In order to facilitate the work on the diagram, most often, the colored sections of the model are given on the diagram in color.

If a new colored area starts from the right or left edge, then a new ball is used for this colored area. If, a new colored area starts in the middle of the product, then two additional balls should be used, namely, the first one for the “new” color, the second one to continue working on the “old” color.

If you start with a new ball in the middle of the row, then an ugly hole may form in this place, and the first loop of the new color will turn out to be very fragile. It will unravel over time!
To avoid this, it is necessary to introduce both threads (one for intarsia - the other for the background) to work in the right place, but a row earlier!

In the row before knitting intarsia (the wrong side of the product is shown here), the threads must be placed in the place you need - one row EARLY!.

How to cross threads?

In the purl row, the corresponding loops are also knitted with the first colored thread. Put the second thread on top of the first and then knit with the second thread.

If the crossing occurs vertically (either to the right or to the left by one loop), then short uniform segments of threads will form on the wrong side.

If there is an oblique crossing (i.e., a few loops to the right or left in each row), then the threads pass along the wrong side of the work to the next colored area.

Crochet intarsia is usually done in RLS.

Plaid - “Beautiful Butterfly”!

The butterfly pattern is symmetrical, therefore only the right half of the pattern is shown, when moving each row to the second half, knit in a mirror image.

knitting. But needlework can be diversified by using a combination of numerous shades. This is how the knitting technique "intarsia" appeared, characterized by knitting a complex pattern on a canvas using several colors. The products are not only attractive, but also excitable to the subconscious - the embodiment of a knitted complex pattern on a simple sweater delights the uninitiated in needlework, as well as experienced craftswomen.

Intarsia - what kind of technique

The technique of knitting "intarsia" in its embodiment is similar to jacquard patterns. But if the jacquard pattern on the needles is the use of 1-2, well, a maximum of 3 shades, then intarsia can require up to 20 or more different colors. Knitting a jacquard pattern is an alternation of no more than three shades in a certain systematic pattern, according to which a kind of graphics is obtained. While intarsia is the knitting of complex natural arrays, floral illustrations and other paintings.

Knitting "intarsia" requires not only experience and skill, but also attention and diligence - not all even experienced needlewomen complete the intended product. Moreover, to use a large number of threads and track the loops of the pattern, additional tools will be required. The most convenient are all kinds of separators for threads - here are spools for winding and thimbles for separating threads to avoid weaving. The pictures show the tricks of the craftswomen, which will be useful to beginners.

A little about diagrams

Intarsia for knitting is a kind of accuracy in size, since the implementation of a complex pattern will require full compliance with the parameters and pattern. Existing complex patterns are designed for a certain number of loops - one cell of the pattern corresponds to one loop in knitting. If necessary, you will have to work with the scheme in advance:

Now it is necessary to stipulate the point about reading the scheme. As mentioned above, one cell of the scheme is one loop of the front surface. The diagram in the front row should be read from left to right - as the picture itself looks. The purl rows are read in reverse order - from right to left according to the figure. Here, unlike the usual openwork knitting patterns, where the purl rows are often knitted as knitting looks, you will have to painstakingly knit each cell in the entire canvas.

Beginners in intarsia will have to use a simpler scheme. For example, knit a sweater for your child with the image of his favorite cartoon character or a simple bear. The direct technique is easier to perform than circular intarsia.

Intarsia all around

Intarsia in circular needles does not exclude the fact of knitting in the opposite direction of the scheme - that is, despite circular knitting, you will have to knit rows back and forth. Of course, needlewomen will not be able to knit in the opposite direction - such a technique is impossible a priori. Therefore, you will have to constantly turn the canvas inside out from the bottom up. Then turn the “pipe” over for ease of knitting and continue to knit the wrong side. The connection of circular rows in this case is carried out with yarn.

For beginners, the technique of knitting intarsia in a circle will be difficult. Therefore, it is better to hone your skills on simple straight knitting, and only then resort to more complex variations. Intarsia in a circle is used in knitting mittens or socks - here you can embody interesting emblems or numbers. For example, to make a gift for the upcoming women's holiday with the inscription "March 8".
The video shows a variant of knitting intarsia in a circle using stocking needles.

About the technique of connecting colors

Now we should talk about the technique of connecting colors, in which most beginners and even experienced craftswomen have problems. The addition of a new color, horizontal, diagonal and vertical transitions, which occurs differently in the front and back rows, as well as a set of loops, if necessary, knitting a pattern immediately from the bottom of the canvas, are subject to consideration.

Entering new colors in the knitting process

Entering a new color is carried out in three ways, each of which entails its own difficulties and features. Depending on your own skill or convenience, it is recommended to choose the most convenient way for you to attach a new shade.

Method 1 - Entering a new shade from the beginning of the front row.

To enter a new thread from the beginning of the row, you must:

Method 2 - Entering a new shade from the beginning of the back row.

Entering a new shade when knitting a purl row is carried out as follows:

Method 3 - Entering a new shade in the middle of the row.

Entering a new shade in the knitting process itself - in the middle of the row - must be done as follows:

Shade change along the edge in horizontal alignment

Changing the shade with horizontal correspondence is not difficult - this is the usual knitting of stripes with the threads stretching along the edge. There may be two options here.

Option 1 - change the thread in the alternation of shades every two rows.

If necessary, change the shades with an equivalent and short alternation of the thread, simply pull it further along the knitting. The replacement takes place in the front or back row, simply by continuing to knit the fabric, according to the scheme. More details of the technique are shown in the picture.

Option 2 - change the thread with a large gap.

Here, too, you should not tear off, just pull the old color along the edge, and weave the thread every 2 rows - cross two threads, and continue knitting with the current color. Detailed weave is shown in the picture.

Hue change in vertical alignment

The change of thread in a row occurs by the usual crossing of the thread. But how to use a new color in a row above the previous use? In this case, two options are considered - for the front and back rows.

For the front row.

Keep the old working thread at work, and just lift the new shade from under the old shade. Detailed change is shown in the picture.

For purl row.

The working thread is left before work, and a new one is pulled out from under the old one and knitting continues in the given sequence. More details can be seen on the photo.

Hue change diagonally

Often, when knitting intarsia, you have to deal with a change of colors in a diagonal placement. This is not as difficult as it seems at first glance, but requires certainty due to the differences in the front and back rows, as well as the direction of the diagonal - left or right.

Diagonal right.

Diagonal left.

Set of loops for vertical stripes

We are talking not only about a set of loops for knitting vertical stripes, but also about a set of loops for knitting a fabric, on which the pattern will be knitted immediately from the first row. Here the following actions are carried out:

All of the above methods for changing shades are accompanied by pictures that can be used as a guide for needlewomen who better perceive the visual display of technology. You can also watch a video that shows all the methods for changing threads.

Intarsia for beginners

After a thorough study of the technique of changing colors, beginners, for sure, no longer want to embody something original in their own performance. However, intarsia is initially a common change of shades, so you can first “practice” on simple models. For example, this simple vest that can be worn “upside down” will help to cope with the problem. To knit a vest, pick up an edge equal to the length of the cut of the shelf. The set uses 2 colors, so changing the threads will not be difficult.

Then you can use the technique in knitting blankets or pillows. Changing different shades for knitting squares is also intarsia, which lends itself faster to beginners. Starting with simple variations, you can gradually move on to more intricate ones.

For those who are not interested in simple variations and want to embody an already more complex model and pattern, you can take a simple example for knitting. Let's say an attractive women's sweater can be associated with small flowers, according to the diagram below.

For sweaters, there are also less complex intarsia patterns - a diagonal change of colors, which is carried out throughout the knitting of the fabric. There are special schemes for such products that use no more than 5-6 shades - the product is not colorful, but individual and stylish.

Complex intarsia schemes

Masters in knitting can use already complex intarsia patterns, where several shades are applied, and the color change occurs every 1-2 loops. Intarsia can also be used with only two colors, which is also attractive and quite difficult to implement - you have to carefully calculate the loops and rows.

If you have already mastered simple variations, use somewhat complicated schemes using 3-4 shades.

After that, you can proceed to even more complex schemes. If you cannot find a more suitable landscape or pattern, use the usual cross stitch pattern - this will save you the laborious search for patterns. It also counts one cell as one loop. The rows go respectively to the purl and front rows of knitting.

According to the script - the shortcomings of intarsia

Intarsia looks impressive and unexpected, but the needlewomen know exactly what they will have to face after.

Firstly, intarsia knitting leads to a significant weighting of the fabric due to the presence of "useless" broach threads. A cardigan knitted using the intarsia technique will be 2 or even 3 times heavier.

Secondly, the use of knitting technique for all details will lead to a thickening of the fabric - broaches from the wrong side will provide additional heat, which sometimes turns out to be superfluous and inconvenient.

Thirdly, numerous cut threads and knots will have to be removed from the wrong side. The canvas turns out to be “mossy”, which is also unattractive and uncomfortable to wear.

To make a decision to use the intarsia technique, you should weigh all the pros and cons of the resulting product. Intarsia is complex and painstaking, so it will be sad if you stop halfway and decide not to implement your plan.

Even the simplest geometric patterns become much more interesting when knitting with yarn of different colors.
And who among you was not delighted with knitted patterns that looked like colorful canvases of real paintings? It seems that the artist took it and painted his picture directly on the knitted product.

Surely, you have repeatedly wondered: "How do such products fit?"
The secret is that such "works of art" are knitted using a very interesting and rather easy-to-learn technique - INTARSION. The technique of intarsia was created precisely in order to simplify the knitting of multi-colored patterns.

This technique can be used both for hand and machine knitting (using a special carriage).

What is intarsia?

Intarsia are colored sections of a knitted fabric, which are most often connected with the front surface (less often they can be connected with other patterns) in a certain pattern.
Unlike the jacquard knitting technique (which it can sometimes look like visually), in which one of the threads passes along the wrong side of the product (sometimes leaving very long broaches), when knitting using the intarsia technique, BOTH threads cross on the wrong side when changing colors products, adhering to certain simple rules.

If you describe the technique approximately, it looks something like this - the "old" thread is temporarily not involved in the work, and the work begins to continue with the "new" thread ... What is also important to note is that the knitted fabric remains the same elastic , as when knitting it with a regular facial stitch.

Even patterns designed for knitting in the traditional way, with broaches, are much easier to do with intarsia.
Since when using this technique, there is no need for such broaches, the inside of the knitted fabric will look much neater.
The thing will be easier to put on and take off, without fear of catching on the stretched thread.

This property of this technique becomes especially relevant when knitting children's clothes. After all, children, alas, very often tear the threads stretched along the wrong side, which cause a lot of trouble to their mothers - needlewomen. Therefore, sometimes you have to somehow secure yourself, and so that the broaches do not tear - even sweep them to the inside of the knitted product. In general, work is added. And despite such difficulties, all the same, there remains a desire to knit amazingly beautiful things with multi-colored patterns...

In general - almost the same advantages ...
However, we got carried away ... let's better go further ...

How to work according to the scheme?

Each cell of the scheme corresponds to the width of one loop. In the front row, the corresponding row of the scheme is read from right to left, and such a number of loops are knitted with a thread of the same color as there are cells in width.
On the wrong side, the pattern is read from left to right.

In order to facilitate the work on the diagram, most often, the colored sections of the model are given on the diagram in color.

How many balls of yarn will be required to complete the product?

If a new colored area starts from the right or left edge, then a new ball is used for this colored area. If, a new colored section starts in the middle of the product, then two additional balls should be used, namely, the first one for the "new" color, the second one for continuing work on the "old" color.

How to start working with a new ball?

If you start with a new ball in the middle of the row, then an ugly hole may form in this place, and the first loop of the new color will turn out to be very fragile. It will unravel over time!
To avoid this, it is necessary to introduce both threads (one for intarsia - the other for the background) to work in the right place, but a row earlier!

In the row before the intarsia is knitted (the wrong side of the product is shown here), the threads must be placed in the place you need - one row EARLY!.

How to cross threads?

In the purl row, the corresponding loops are also knitted with the first colored thread. Put the second thread on top of the first and then knit with the second thread.

If the crossing occurs vertically (either to the right or to the left by one loop), then short uniform segments of threads will form on the wrong side.

If there is an oblique crossing (i.e., a few loops to the right or left in each row), then the threads pass along the wrong side of the work to the next colored area.

How to avoid tangling threads from different balls?

Balls of yarn of different colors can be wound on individual spools. After that, they must be placed in a certain sequence near or before work and cross the threads in the front row, as described above, observing the rule:
After each knitted row, turn the yarn alternately, then to the left, then to the right ...

How to knit a pattern symmetrically?

As you can see, mastering this technique is not at all difficult, which I sincerely wish you.
Improve your skills and delight yourself and your loved ones with new wonderful works.
Good luck with your creativity!

Publication date: 01/14/2017

Intarsia is a type of multi-color knitting often used in products. A feature of intarsia is the knitting of each color block from a separate ball; when joining color blocks, multi-colored threads intersect on the wrong side. Using the "intarsia" technique, you can knit complex multi-color patterns, changing the color not only horizontally, but also vertically or diagonally.

In other words, the "intarsia" technique is based on the temporary exclusion of the main background thread from work, knitting is carried out with a new thread of a different color.

Features of intarsia: what you need to know

Previously, it was believed that the product using the “intarsia” technique is knitted only in stocking knitting: front stitch on the front side and purl loops on the wrong side, but modern needlewomen knit not only volumetric patterns, but also use yarn of different textures.

Advice! If the yarn is not new, but used, then when knitting with a satin stitch with intarsia, defects will be visible on the product. To avoid this, it is better either not to use stocking knitting, or to use only a new thread to create a pattern or pattern using the intarsia technique.

But it is better for beginner needlewomen, nevertheless, to adhere to the following rules:

intarsia is knitted in turning rows, it is impossible to knit in a circle, as the threads will remain at the end of the light blocks;
yarn for multi-color knitting is selected the same in thickness, it is ideal if the yarn of different colors has the same article;
the yarn should be stable when washed, not shed to avoid dyeing neighboring colors;
if the colored blocks are small, then it is better to knit with short multi-colored threads, rather than large balls, to avoid tangling.

Multicolor knitting according to the scheme

It is preferable (and easier) to knit using the “intarsia” technique according to the pattern, this is especially necessary for knitting complex patterns; you can use a cross stitch pattern as a pattern. Even experienced needlewomen, when knitting a pattern, make marks on the pattern in order not to get confused.

Each cell of the circuit corresponds to the width of one loop. A row of the scheme from the front side is read from right to left, and such a number of loops of the same color are knitted as there are cells in width.

On the purl row, the pattern is read from left to right. To facilitate the work on the diagram, the colored sections of the model are indicated by their own color. If you're new to the intarsia technique, look for simple patterns with a few colors, such as the one shown in the next section, that would look great on a girl's sweater.

Scheme for beginners "Ice cream cone"

Only 4 colors are used in the pattern, and no more than 3 are knitted at the same time. The shape of the colored blocks is simple, purl loops are used to give texture to the pattern, and not just the front surface, characteristic of intarsia.

Choose the colors for the ice cream balls to your taste, it is better to make the ice cream cone beige or yellow.

In the diagram, colored empty cells are front loops (kp) on the front side (RS) and purl loops (sp) on the wrong side (WS), colored cells with a dot are purl loops on the RS and front loops on the IS.

Advice! When knitting a line connecting colors with an inclination to the right, change and twist the threads only from the front side, and when the line is tilted to the left, change the threads in the wrong row, if this nuance is not taken into account, then a not very beautiful “crossbar” may turn out over the border loops.

Subject to the recommendations, the pattern in the "intarsia" technique on a knitted product is the same from the front side and from the inside. If you gain some experience, you can knit a real work of art in the form of a pullover, jacket, sweater or coat!

Popular in category: