home › Prayers › Keychain on a backpack - simple master classes (Rabbit, Fish and Owl). DIY metal keychains DIY cardboard keychains

Keychain on a backpack - simple master classes (Rabbit, Fish and Owl). DIY metal keychains DIY cardboard keychains

For each holiday, we are always looking for something to please ourselves and our loved ones. And a very original and relatively inexpensive gift will be a handmade keychain.

What can you make a keychain with your own hands? Such a keychain can be made from materials such as: leather, polymer clay, satin ribbons, a chain with beads, buttons, metal and, of course,.

Consider a few master classes on making key rings.

How to make a keychain from satin ribbons with your own hands?

It is necessary to take two thin ribbons 2 m long and fold in half.
We twist them as shown in the picture. In order not to get confused, let's number the tapes.

Raise tape 3 up.

We put tape 1 on top of tape 3 and draw it into the loop formed between tapes 3 and 4. Tighten it and get a square. To get a keychain of a round company, you need to tighten it tighter.
The view from the back should look like this.

We lower the tape3 (which is on top) down.

Tape 2 (left) is directed to the right, and then tape 4 (bottom) - up.
Tape 1 is threaded into the loop that tape 3 formed when lowered.

And tighten again. We continue to weave as well until we get such a keychain, which we tie to the ring with the remaining ribbons.

Many people prefer to have accessories that emphasize their individuality. One of the options for such a detail is a keychain.

This is a versatile piece that can adapt in style to any thing, whether it's a backpack, keys, a wallet, a pencil case.

Such a trinket as a keychain can become a unique item if you make it yourself. A handmade keychain will be a nice gift for family and friends. This is one of the economical options for accessories.

There are many suitable materials for manufacturing that can be found at home.

Materials for manufacturing

A handmade keychain is not just a thing, it is a kind of talisman and amulet that can bring good luck to those who really believe in it. Most of the materials can be found at home, among them will be:

paper:
beads;
threads;
textile;
tapes;
plasticine;
rubber bands.

For manufacturing, suitable: straps, corks, buttons, pencil remnants. The main assistant in the work will be fantasy. Thanks to her, an unpredictable long-awaited result will turn out.

Leather keychain for a backpack or handbag

Made of leather keychain will suit any style, from classic to sporty. Will be a good addition to the preferred image.

For work you will need:

a small piece of skin;
threads;
fork;
needle;
glue;
key ring.

The next step is the manufacturing process:

A template is selected and a shape for the keychain is cut out.
Glue is applied to the previously cleaned surface of the skin in order to more securely fasten the material.
A border is drawn along which the thread will be threaded further.
Holes are made with a sharp fork.
A ring is inserted and the product is sewn with a thread.
The edges of the skin are cleaned.

The finished accessory can be attached to a bag or purse to decorate or replace the slider.

Bead keychain

Beaded accessories can be made in any colors, shapes and themes.

The most popular are animal figurines, vegetables or fruits, flowers and hearts. However, certain skills are required to perform such work.

To make a keychain, you will need:

a set of beads of the desired colors;
fishing line;
scissors;
scheme for work;
key ring.

The scheme for work can be found on the Internet. For example, to make a keychain in the shape of a flower, you need:

Cut the line and bend it in half.
At one end, advance the beads and advance to the middle. Pass the other end of the fishing line through it.
Put on the next row of beads one more bead. So repeat with each row. The petal will turn out to be more interesting if you thread beads of a different color along the edges, starting from 3-5 rows.
Having reached the middle, reduce the number of beads in a row. The number of beads is optional.
For the core of the flower, take a large yellow bead.
Connect each element to each other, twist the fishing line and secure with a yellow bead.

The product can be attached to a bag or pencil case, which will serve as a decorative element.

Textile keychain

From small remnants of fabric, you can sew a keychain and present it as a nice gift to your friends. You just need to have basic knowledge.

To make an owl keychain you will need:

fabric (multi-colored);
lining;
leftover felt (for eyes, beak and paws);
pattern;
threads;
scissors;
needle;
buttons;
keychain ring;
piece of lace.

Note!

To make a keychain in the shape of an owl, you must first prepare a pattern and get to work.

To begin with, the lining is connected to the fabric and processed. After, the details of the owl's body turn out to be obvious.
Now the front of the owl is decorated. Felt circles are sewn in place of the eyes, and buttons are sewn on top, a beak is added.
Next, the front and back are connected manually or with a sewing machine. At the same time, it is necessary to leave a small hole for the lace.
A ring is attached to the sewn lace. After that, the hole is sutured.

Below are photos of key rings and their phased production.

Recently, products made of polymer clay and key rings, including, are gaining popularity.

The finished clay product is baked and for a long time pleases the eye with its brightness and originality.

The matter remains only with imagination and materials, some of which can be found at home or purchased in needlework stores.

DIY keychain photo

Note!

A great opportunity to please a girl or girl is to give her a cool keychain that no one else has. How to make a keychain for a backpack and what shape of keychain to choose? Not so long ago, key chains made of wool came into fashion. Especially interesting key chains are made by Japanese craftsmen. Such an original keychain can be decorated not only with a backpack, but also with a bag and briefcase.

Let's try our hand at this work - and make a keychain for a backpack with our own hands. Workshops will help you work with yarn and felt. In the absence of felt, you can take a suitable dense fabric; inexpensive napkins are sold in a hardware store - they may well replace felt.

How to make a keychain for a backpack? Let's start with a cute, cute gray Bunny made out of a pom-pom. For the Wool Rabbit, we need gray and white yarn, some black yarn for the eyes and pink yarn for the nose. First of all, for the convenience of work, we need a “working machine”, a cardboard blank on which we will wind the yarn. If you don’t have such a plastic machine as in the photo, it’s okay, you can make it yourself from thick cardboard.

We will need 2 pieces of thick cardboard 10/10 cm. We take a compass, or a suitable mug with a diameter of 8 cm and draw around. We draw a hole inside with a diameter of 1.5-2 cm. The larger the diameter of your cardboard "donut", the larger the pompom will be. We need 2 donuts. For convenience, cut the circles in the middle. Between the circles, we must place a long thread or wire so that after we cut our pom-pom, it can be pulled and tied. If you don't pull the pom-pom off, it will fall apart.

We wind the yarn on double cardboard, then cut it with scissors in a circle. Remove cardboard boxes. The pompom is ready.

There is another option for creating a pom-pom, and it resembles our master class. You can make 2 of these cardboard blanks, and wind the yarn around them. Choose which option you like best.

For work you will need:

Yarn gray acrylic, wool or acrylic with wool - 30 gr., A little black, pink and white yarn.
Scissors big and small.
Cardboard for workpiece.
Wire or strong thread to tighten the pom-pom.
The needle is thick, a toothpick, or a needle for felting wool.
Carbine.

We cut out from cardboard any of the two options for the blank for the pompom. We should have 2 blanks. We put a small piece of thin wire between 2 cardboard blanks. With this wire, after winding and cutting, we will tighten the pompom. Next, we will wind the yarn on the first blank. We will wind up step by step in this order: 1, 2, 3, 4, 5, 6 - on the first cardboard.

Scheme of work step by step.

As you can see, everything is in colors here. After we have made the first blank, we draw up the second. On the second blank, we wind only gray yarn.

Step 1: Make a small white nose. Wind 12 times with white yarn just to the right of the middle of the cardboard. On the other side will be the chin of the Rabbit.

Step 2: make a pink mouth for our Rabbit. Wind evenly 10 times with pink yarn, distributing evenly, not in a bun.

Step 3: wind 22 times with white yarn, completely closing the 1st and 2nd steps.

Step 5: With black yarn we make eyes. They will not be too close to each other, but at a distance. Wrap with black thread 18 times.

Step 6: again gray yarn, we wind along the entire length 65 times with gray threads.

Next, turn the workpiece over, we will make rabbit ears. To do this, we substitute the index finger, and we wind it, grabbing our workpiece 13 times with gray and 13 times with pink yarn. The higher the distance, the larger the ears will be.

Then you need to make a second cardboard with one gray yarn!

That is, we should get 2 identical parts, 2 halves of the keychain. This can be seen in the scheme of work at the top of the master class. We look at steps 6 and 7. We connect these 2 blanks, lay a thread or wire so that the pompom does not fall apart. Cut off the circle. We should get a magnificent pom-pom with protruding "ears".

We disassemble the middle into 3 parts, cut the pink nose short, round off the white muzzle.

We take a felting needle or a thick needle, and work with a pink nose. Need to dump it in the technique of felting.

It remains to dump the gray ears of our animal. This can also be done using the felting technique, after cutting off everything superfluous with scissors.

In the process of felting the ears, you can add gray or pink yarn.

That's all. The keychain for the backpack is ready. We fasten the keychain to the carabiner with the same thin wire.

Details can be seen on the video. It is wordless, but very clear:

Fish - fabric keychain

How to make key chains on a backpack with your own hands? See what a wonderful Keychain Fish is obtained from different patches of fabric. You can make several fish and hang on one carabiner. First, we make “fins”, lightly stuff them with padding polyester. Next, sew the "fins" to the parts of the body. At the end, we sew both parts of the fish, leaving 2 cm for eversion. Having turned inside out, we fill it with padding polyester and sew up the hole with a “hidden” stitch. We fasten a carabiner or a thick cord to the “fin”.

It is always not easy to find something in the bag of any girl, and if it is a small key, then it can take a lot of time to search for it. For a faster search, you need a large and beautiful keychain. Moreover, it will always emphasize your style and beauty. Let's see how you can make a beautiful keychain with your own hands.

How to make a keychain at home?

This world is developing so fast that we simply do not have time to keep track of everything. At the moment, there are hundreds of thousands of different key chains, from different materials, different colors, etc. We will show you how to make the simplest options, from simple and cheap materials.

How to make a leather keychain?

Prepare materials and tools:

Key ring;
- a piece of leather;
- batting;
- scissors;
- pen;
- thread and needle;
- printed template.

1. First you need to decide what shape we want to make a keychain. Then we print the template on a piece of paper. As you can see, you can make different shapes - heart, triangle, circle.

2. Attach the skin to the template and draw the cutout area. Leather can be taken both natural and artificial. We cut out two parts of the keychain, back and front, as well as a small strip (see photo).

3. We put the two blanks together and start stitching. We introduce the needle from the inside of the future keychain to hide the knot of the thread. We begin to sew with small stitches. On one of the faces, do not forget to put a strip for the ring. Fold it in half and tuck it into the mold so that it peeks out a little and sew. Do not sew all the edges at once, because you still need to put the filler in the middle.

4. To add volume, add a little batting to the middle. And after that we sew up completely.

5. We cut off the excess thread, insert the key ring - and our keychain is ready!

How to make a beautiful fabric keychain?

To make such a wonderful and very bright keychain, we need:

Beautiful fabric;
- peltex;
- iron;
- curly scissors;
- thick tape.

Peltex is a material that adheres to the fabric under the influence of hot (iron).

1. Let's prepare the fabric of our choice. It should be well ironed from the inside. Peltex (white fabric in the photo) does not need to be ironed.

2. Using a round template, transfer the shape to the fabric.

3. We place the decor element, the letter "C" in the middle of the keychain shape. We stick in any way possible.

4. Now, we need to attach the peltex. We turn our fabric over to the other side, attach the peltex and iron it with a hot iron. Apply the iron for 15-20 seconds so that the fabric sticks well.

5. Cut out our circle shape. Prepared part and back, you can use another fabric.

6. Sew the top and bottom.

For better reliability, we stitched almost the entire circle. Do not flash everything, because you still need to insert a ribbon for the ring.

7 . Trim the edges with curly scissors.

8 . Cut off a piece of thick tape, bend it twice and insert it into the keychain. We sew again.

You can insert a key ring.

We cut off the extra threads and our keychain is ready!

How to make a lego keychain

You can also make a beautiful Lego keychain. All you need is a few Lego bricks and key rings. In order to make them convenient to hang, you can make a beautiful mount on the wall.

Personalized keychain

Hello, dear readers of master classes in the online store 7beads - accessories for jewelry!

Today I'll show you how to do it . In the master class we will have three ideas.

Nothing difficult to create keychain with name no, so the master class will be more of an overview rather than a detailed one.

Below I will indicate the necessary fittings, but also an overview. Categories will be listed. And the choice of beads, hats and other accessories will be your choice.

So, let's start the master class: " how to make a personalized keychain with your own hands"

It will consist of three parts and as a result we will have three accessories.

Required accessories:

plastic, glass, stone, etc.

First master class:

We will get such a beautiful personalized keychain, in a combination of black and turquoise beads with inserts of beads with silver letters.

First of all, we take a cord of lavsan about 25 cm long. We string the beads in such an order that there is a symmetrical number of beads and caps along the edges on the behalf.

Next, there will be an insert of two pendants that have holes along the edges like connectors. In our case, the pendant is a wing and a heart. We connect them with a double ring. All the necessary accessories are in our online store 7beads.

Now the pendants need to be connected in one row to the beads. We fold one end of the lavsan in half, thread the resulting loop through the hole of the heart, then thread both ends of the lavsan into the same loop. We tighten it tightly and make a couple of knots. We hide the short end of the lavsan in the nearest beads and cut off the tip.

In the same way, we attach a ring to the other end of the lavsan - the basis for a nominal keychain. We tighten, we make a couple of knots. We put three beads on the free end of the lavsan, exactly the same and in the same order as the beads that are on the edges on behalf.

We connect new beads on a cord with pendants. To do this, in the loop that needs to be passed through the hole in the wing, we stretch the end of the lavsan on which the beads are located. We tighten it tightly, make a couple of knots.

We push the end of the lavsan through a pair of beads and caps. Tighten well and cut off the end of the cord.

Our first keychain with the name "Vladlena" for keys is ready!

Second master class:

In the second master class, we will make such a cute and delicate personalized keychain with beads with the effect of cracked pink glass and a hamsa bead.

We take a pink cord from lavsan about 20 cm long. Fold it in half, put the loop through the base for the keychain, then pull the ends of the lavsan into the loop, make a couple of knots and tighten it tightly.

At one end of the cord we put on beads, hats and letters with the desired name. We tie several knots, cut off the lavsan and solder it with a lighter.

We do the same with the second cord. Do not forget to make an insert from the bead from the evil eye inside the "hamsa" bead.

Personalized keychain for "Alena" is ready!

Third master class:

And we will have a nice keychain with a name with 10 mm plastic beads, with a "clover" pendant for good luck and a bead from the evil eye.

We will need a lavsan cord about 15 cm long. We put beads, hats and letters with the desired name on it. Insert crimps between letters. They will perform a decorative function. The tip of the lavsan, which is located after the end of the name, is tied several times and soldered with a lighter. The other end of the cord remains free for now.

The second step is to fix the bead from the evil eye on the pin, cut off the extra tip of the pin with wire cutters and make a loop with the help of round-nose pliers.

We fasten the pendant on the extension chain on one side, on the other hand, the bead from the evil eye with the help of connecting rings.

We take the connecting ring, fix the first part on it, which consists of lavsan and beads. We tie the end of the cord a couple of times, cut it off and solder it with a lighter.

We attach the extension chain to the same connecting ring on one of our links.

It remains only to put the finished part on the ring - the basis for the keychain.

Our name keychain with the name "Elina" is ready!