home › Prayers › DIY snowflakes from ribbons. Brilliant and delicate kanzashi snowflake for a bandage or hairpin with your own hands

DIY snowflakes from ribbons. Brilliant and delicate kanzashi snowflake for a bandage or hairpin with your own hands

To make elegant New Year's snowflakes from satin ribbons with your own hands using the kanzashi technique (the same as in the final photo), you need to create 3 types of petals from a white satin ribbon and silver brocade. The diameter of such products will be approximately 12 cm. With such snow-white flowers, you can decorate hair ties (this is demonstrated in the master class), as well as make New Year's kanzashi Christmas tree decorations, an addition to a ball gown for a matinee or crown a hoop (which is very convenient if you girls short hair).

Get the following crafting materials and tools from the chest (based on a couple of snowflakes):

White satin ribbon: 0.5 cm - 48 strips of 8 cm; 2.5 cm - 12 strips of 10 cm; 5 cm - 10 squares with a side of 5 cm;

Sparkling silver brocade 0.5 cm - 16 pieces of 8 cm;

Felt: for attaching the petals-rays of a snowflake, and if you plan to create a hair accessory, then also for attaching and the base of the hairpin;

Festive accessories in the form of sparkling rhinestones 0.4 cm, a hugger and a large half-bead to it;

2 white rubber bands (if your plans include the creation of just such a product);

Scissors, lighter, glue gun, soldering iron.

Snowflakes kanzashi mk:

A thin white satin ribbon and a brocade of the same width will be used to create the same eyelets. Cut 48 satin stripes and 16 brocade stripes. The length of all strips is 8 cm. Bend each strip into a loop, overlapping the ends of the tape. Fix with glue or singe only the tips.

Turn the second portion of the white satin ribbon 2.5 cm wide into sharp rays. To do this, cut 12 strips of 10 cm. Bend each strip to get a double rectangle 2.5 cm by 5 cm. Draw a diagonal in each rectangle with a hot soldering iron. This trick will allow you to melt and separate the blanks into 2 identical pointed parts. At the point of contact with hot metal, parts of the parts will stick together.

Open the cut halves of the former rectangle. One of them will look like a sepal, the second - like a quadrangle. Glue a half-bead to the sharp end of each piece. All kinds of leaves-rays will be needed for decoration.

Cut out a small circle from the felt and glue the first layer of loops (of 8 pieces) at the very edge.

Add a second same layer, but move it relative to the bottom one.

And glue another tier of 8 loops. Thus, for one snowflake you will spend exactly half (24 pieces) of the prepared white loops.

Next, glue the silver layer - it will differ from the previous three only in color.

At the back, glue 6 sharp parts with rhinestones, obtained by burning from a 2.5 cm satin ribbon, around the circumference. The first layer is ordinary quadrangles.

Attach the second layer of sepal halves as well.

For the central part, you need to prepare a small flower from special sharp petals.

Cut out squares with a side of 5 cm. Fold the satin diagonally.

Bend again and close the corners in the resulting triangle to form a sharp kanzashi petal.

Cut the petal a little and turn it inside out by pressing your finger from the bottom up. Sharp petals should be convex.

Prepare 5 identical turned-out petals, a hugger and a half-bead.

Glue the flower with a shiny center.

Glue the snowflake to the center.

Make a felt mount for rubber bands.

Glue the rubber bands on the back by dropping glue and pressing down.

Elegant snowflakes are ready. Two identical parts can even be glued back to back to get a symmetrical product for decorating a Christmas tree or interior. You can repeat the same New Year's kanzashi on a blue ribbon, gently organza, satin, silk. Or use more sparkling rhinestones and brocade, because there is never a lot of silver when it comes to snowflakes. Be sure to experiment.

Using the amazing kanzashi technique, you can create not only flowers, but also snowflakes that will be just as beautiful, but also fabulous. Such New Year's products can be made in white colors, in addition, sparkling brocade elements, rhinestones, half beads and other decorations can be used. In addition, blue, blue or golden colors are suitable for creating New Year's paraphernalia.

Beautiful snowflakes will shine on the Christmas tree, if you attach them to the branches, they will decorate the interior before the holiday. As well as elegant and expressive products can become the basis of hairpins for a girl. Young women of fashion will look like real Snow Maidens if they decorate their hair with such snowy accessories. A master class on making kanzashi snowflakes is given below.

For one snowflake you need to prepare:

- 24 petals from a white ribbon 0.5 cm wide (one petal consists of four segments 6 cm long; 5.5 cm; 5 cm and 4.5 cm);
- 8 petals of silver brocade 0.5 cm wide (length of silver pieces 7 cm);
- 11 sharp kanzashi petals from a white ribbon 2.5 cm wide (cut out squares with a side of 2.5 cm);
- 8 diamond-shaped leaves from a white tape 2.5 cm wide (they will need 8 pieces of tape 10 cm each and a wood burner);
- round felt base 4 cm;
— 1 wide hugger and half-bead-stone 0.6 cm;
- 8 small mother-of-pearl half-beads 0.4 cm each;
- glue (transparent and strong).

Ribbon snowflakes, master class

1. Cut strips from thin 0.5 cm white satin ribbon to create layered droplets. The snowflake will consist of three layers of four-layer petals, in total, 24 portions of segments of each length listed in the list of materials will go to the indicated parts - 24 pieces of 6 cm must be prepared; 5.5 cm; 5 cm and 4.5 cm stripes.

2. Make droplets from the segments, gluing the ends together. This can be done with glue or a lighter flame. The size of the droplets-loops will proportionally decrease for segments of different lengths.

3. Glue the droplets in size together to get the petals. Connect the parts, overlapping each other, and fix at the glued base.

4. All 24 servings of droplets you need to turn into layered petals.

5. Divide all blanks into 3 parts of 8 pieces each. Cut out a 4 cm felt base. Glue the first layer of chamomile petals on it, consisting of 8 parts. When gluing droplets, step back from the edge of the circle evenly - by 05-0.6 cm.

6. Glue the second part of the petals on top in a checkerboard pattern.

7. Add the last row from below for splendor (but the loops should be directed upwards).

8. Cut out 2.5 cm squares from white satin or ribbon. Of these, you need to make classic sharp kanzashi petals for the inner flower. And 11 parts will be spent on this flower. Bend the squares diagonally (one).

9. Bend the resulting two-layer triangles in height. Close the resulting four-layer triangular blanks at the base, glue.

10. Cut along the line from the bottom to make the petal flatter.

11. Glue 11 petals into a chamomile. Prepare a hugger, a duplicate flower and a half-bead.

12. From 8 pieces of silver brocade 0.5 cm by 7 cm, also make droplets.

13. Glue the silver layer to the center of the snowflake.

14. Drop glue and insert a chamomile inside, then a hugger with a pebble to make the snowflake sparkle.

15. To create the bottom layer of white leaves that will resemble the pointed rays of a snowflake, use the last portion of the tape: 8 pieces measuring 2.5 cm by 10 cm. Fold each strip in half. Then divide the resulting rectangle in half diagonally with a burner. Unfold the pouches. Each rectangle will be divided into 2 portions, then use only those that look like sepals. Glue small mother-of-pearl half-beads on the tips.

16. Glue the leaves with the last layer from below. Arrange them evenly overlapping around the circumference.

The New Year holidays are approaching, which means that it's time to think about creating an original decoration and make your own snowflake using the kanzashi technique.

What is kanzashi? This is the art of folding pieces of fabric so that they make beautiful flowers. Just using the kanzashi technique, you can make a beautiful snowflake.

A beautiful snowflake made of satin fabric is an excellent interior decoration, a New Year's image, you can make a snowflake for a Christmas tree, a brooch or a hairpin.

Kanzashi snowflake - what you need to prepare for work

Of the tools you will need scissors, a needle and thread.
Glue (hot gun or Moment glue).
Candle or lighter, tweezers.
From materials, a satin ribbon 5 cm wide in white or pale blue.
Cardboard or piece of felt.
To decorate a snowflake, beautiful glue stones or small beads.

How to make a kanzashi snowflake

We immediately draw your attention to the fact that it is necessary to prepare all the tools and materials, because the work is painstaking, so you should not be distracted by the search for the right material and fixtures.
You need to cut out squares from a satin ribbon, 5 by 5 cm in size. In total, 42 squares will be needed. The number of blanks and their size may vary and depend on the type of snowflake. Therefore, if you want to make a snowflake with small petals, then you need to prepare another 3 cm wide ribbon and make blanks 3 by 3 cm in size.
From each square you need to make a petal. How to do it: fold the workpiece diagonally, then again and again. Get a small triangle.
The outer corners of the figure must be wrapped to the middle part of the workpiece to get a rounded triangle shape. It is best to work with tweezers, because it is very difficult to hold such a small detail in your hands. You can use a clip instead of tweezers.
The first figure is ready, now you need to fix the corners. To do this, cut off the excess and use a lighter to melt the edges. When you melt the edge, press this place with tweezers. You can also press the cut point with your fingers a few seconds after reflow. The fabric will not be as hot, but it will still have time to grab.
Look at the first petal - if it is uneven, you need to cut off the excess with scissors, trim and also melt the edges of the tape with a lighter.
We make such 12 petals. There are still 30 blanks left in order to make pointed petals. The workpiece is folded in the same way, only the edges need to be made not rounded, but sharp.
Cut off the excess, melt with a lighter. Make sure that all blanks are the same size.
We take 6 petals, string them on a needle and thread, tie the ends of the thread. It turns out a round center.
Now you need to glue sharp triangles together. Can be glued on with glue or strung on a thread. Only the petals are not glued completely, but in the corners.
We made double petals, now we need to connect pairs of petals and insert a third one, this way we get blanks that need to be fastened in pairs (sewn or glued). Thus, the rays of the snowflake are formed.
The workpiece must be attached to the base. We cut out a circle from thick cardboard (or from felt fabric). The diameter of the circle should be equal to the diameter of the central flower.
From a thin tape, you must immediately form a loop, glue it to the workpiece.
Next, you need to assemble a snowflake: glue the central part and successively the rays. The work is painstaking, do not rush, everything will work out.
The snowflake is ready, it remains to make a few touches: attach beads or glue rhinestones.

Preparing for the New Year holidays is always exciting: you need to buy gifts, decorate the room. A very original version is a kanzashi snowflake. It is easy to make and looks like a fabulous souvenir. Such a product can transform the interior or use as a gift, addition to it.

Christmas snowflake-kanzashi

As you can see from the photos presented in the article, these products look very beautiful and impressive. For their manufacture, only fabric is needed. Due to the volume of the design, the play of light and shadow in the kanzashi elements, the snowflake looks so beautiful. All parts are securely fastened, so you do not have to redo the decor every year, as is the case with paper decorations, which are torn and quickly become unusable. Another advantage of such crafts is ease of manufacture, because making them is no more difficult than paper ones. You can decorate a window, a Christmas tree, a New Year's costume, and even make a garland with decor from satin ribbons.

What will be required

The kanzashi snowflake needs to be done neatly and consistently, so it's best to find everything you need beforehand. During work, do not be distracted by the search for missing materials. So, prepare the following:

Satin ribbons of different widths (from 5 mm for decorating the frame to 5 cm for making large items).
Fabric of suitable quality, color and texture (nylon, organza).
Scissors.
Lighter, candle, matches.
Tweezers-clamp (for ease of use).
Needle with thread.
Thermal gun.
Cardboard.
Wire.
Decor (beads, beads, sequins, for example in the form of snowflakes).
Braid or for making pendants (optional).

The list is up to the mark. In the minimum set, you can get by with ribbons, scissors, a lighter and tweezers.

How to fold a single petal

How is a kanzashi snowflake made? The master class will teach you how to assemble simple blanks to create it.

Work like this:

Cut the ribbon or other prepared fabric into squares.
Treat the cuts over a candle flame or lighter.
Fold the square in half and then in half again. You can glue the layers with a thermal gun, sew them together with threads, or heat the joint over the lighter and squeeze it properly with tweezers so that the parts fuse.
Trim the bottom corner of the resulting workpiece so that it takes on the form of a petal that looks like a ring.
Having completed many of these details, you can make elements of rays for snowflakes and centers from the required number of parts.

How to make a double petal

To make beautiful ones below), you will need to make double petals.

The technology is like this:

As for singles, cut the ribbons into squares. It is possible to make a double element both from the same and from blanks of different sizes. In the first case, you will have to cut the bottom of the petal additionally. It is better to choose different colors and even textures. This will be more effective.
Fold both squares individually into triangles.
Repeat the previous step one more time.
Superimpose one triangle on another (smaller to larger).
Perform the third addition of both blanks together.
Connect, like a single piece, with a lighter, thread or hot glue.

Kansashi snowflake: master class

If you have mastered the method of making simple elements (single or double), you can start creating a beautiful winter decor. To make the same beautiful kanzashi snowflakes (photo below), you just need to combine the manufactured parts in different versions.

To form the centers of snowflakes, you can make an element consisting of larger double petals with smaller single or the same double blanks glued into the middle. In addition, you can decorate the middle of each petal by inserting and securing a drop-shaped pearl bead. It is easy to create a huge number of options. It all depends on your imagination, perseverance and desire.

The assembly of the snowflake is carried out in two ways:

Without frame.
On a wire and cardboard basis.

The second method is suitable for large products with long rays.

Small snowflakes can be made by the first method. In the version without a frame, the snowflake is simply assembled by gluing the elements together. First, blanks from several petals are assembled, and then large parts are assembled together.

Assembling a snowflake on a frame

If you decide to work with the framework, the sequence will be as follows:

When the required number of petals is ready, cut out a circle from cardboard according to the diameter of the snowflake's turnover to close the joints of the parts. The same circle, only of a larger diameter, is made of fabric.
Put the cardboard blank on the fabric and pull the edges of the fabric along the inner contour of the cardboard circle.
Cut the blanks for the rays from the wire (3 large and the same number of small ones). The size is equal to the diameter of the snowflake (after the wire can be cut in half).
Wrap the wire in corrugated paper (or replace it with tissue paper). Coat with glue.
Glue narrow satin ribbons of a suitable color to the wires (they will be on the back).
Cut the pieces of rays into two parts.
Start assembling. Collect the middle of the snowflake, for example, from 6 petals. Glue the blank to a round cardboard and fabric base.
Glue the prepared parts of the rays to the frame wire.
Glue all the rays to the circle on the back of the snowflake. This can be finished, but if a neater back side is required, make a second circle of fabric and glue it with the top layer. It is easy to attach a magnet to it. The circle can also be with a cardboard base inside.
Finish the front side: decorate with beads, if desired, treat the corners of each element with glitter gel.

Thus, a kanzashi snowflake is a beautiful decor that is easy to make, and there are many options for its use.

Snow sparkles outside the window, shimmers with all the colors of the rainbow, snowflakes fall from the sky, it seems that Santa Claus himself is about to come. And on New Year's Eve, he always comes to children for matinees and holidays, for street festivities and for theater performances. It is imperative to prepare for a matinee or a school holiday, buy a new dress, choose a hairstyle, pick up exquisite winter accessories.

A snowflake made of ribbons made using the kanzashi technique, which can rightfully be called a winter flower, can become a wonderful decoration for hair. Firstly, it is made of the thinnest satin ribbons, modeled from petals of a special shape, and secondly, it really looks like a snowflake due to matching fittings and shape. You can easily make a pair of hairpins with snowflakes according to the master class below, let's see how.

Snowflakes kanzashi master class

To make a beautiful product, you need to buy the accessories indicated in the list below. For convenience, we will consider separate details for the upper and lower flowers, then it will be clearer what is needed for one winter fantasy snowflake.

Details for making a small flower:

12 pieces of satin ribbon in white and blue colors - 2.5 * 52.5 cm;
2 white felt bases - 2.5 cm and 3.5 cm;
6 double-sided blue stamens;
blue rhinestone chain;
white half bead - 1.2 cm;
white beads with a diameter of 3 mm.

Details for making a large flower:

7 pieces of white, blue ribbon, silver brocade - 5 * 5 cm;
white felt base - 4 cm.

Details for making seven branches:

14 pieces of white, blue ribbon - 2.5 * 2.5 cm;
7 pieces of blue ribbon - 2.5 * 2.5 cm;
7 pieces of transparent rhinestones - 6 mm in diameter.

The winter ornament is conveyed by almost traditional types of kanzashi petals: triple sharp petals and round ones (double and single). In general, it turns out a beautiful and delicate decoration. In addition, there is interesting work on independent modeling of the middle.

Snowflake-kanzashi step by step

The photo shows fragments of fittings necessary for interesting work. We will not dwell on the preparation of segments of satin ribbons. Craftswomen already know that the threads knocked out during cutting should be singeed with a lighter flame, do it carefully and quickly. But how to model an interesting middle, we will tell you in more detail. Cut out a square of felt. Glue a large half-bead on it. Glue a chain of blue rhinestones around. Next, sheathe with beads - small and elegant. Beads sew close, without gaps. After that, with small scissors, cut around the circumference of the felt, clearly docking the cut with the edge of the middle.

To create a triple petal with 5 cm squares, fold all the squares twice.

You should get triangles. Assemble "puffs" of blue, white and silver ribbon. Close the sharp corners with your fingers, then solder them with a match and cut them off from the bottom.

Use 2.5 cm squares to create double rounded petals. Layer blue on white. Press sharp corners to a right corner. To form a drop, round the inside, pull the sides back, solder in this position.

Insert small drops into the holes of the large triple petals.

Cut off the round felt and glue all 7 petals onto it.

Glue 17 more rounded petals yourself into a small flower (it will become the top one), prepare blue stamens for decoration.

Cut the strands of stamens in half. Glue each head along a small petal.

From small blue, light blue and white squares also make twigs. Model rounded petals with a central fold, single layer. There are 2 times less blue parts - they will become tops, the rest should be placed in pairs on the sides. Glue the branches and decorate with crystal droplets.

Glue the branches between the large petals of the bottom layer.

A beautiful winter product is ready. The frost outside the window draws unique patterns, and we were able to simulate an imitation of such a creation from ordinary satin ribbons.