How to knit socks for children and adults? Patterns for knitted socks using the enterlac technique. Socks with openwork leaves

Knitting openwork socks is just as easy as making standard socks. These lacy and easy-to-make items will not only help keep your feet warm, but will also bring pleasure to the wearer, because patterned socks look simply wonderful. How to connect them? This article will present the best schemes for such work with a step-by-step description.

Knitting openwork socks is as easy as standard socks

The openwork elastic band is very beautiful, it looks interesting and stylish. The patterns of the elastic bands can be different; if desired, the master can find any pattern that suits his taste.

The work consists of the following successive stages:

1. 66 stitches are cast on a knitting needle. The first 2 rows are knitted on face. This elastic band is openwork, so you don’t have to count on the product being warm.
2. The toe, back of the work and foot should be knitted in stockinette stitch. As for the elastic, it will be knitted on 15 loops out of 66.
3. The openwork pattern should be made according to the following pattern: knit 2 loops face down, 2 stitches together, yarn over, remove 1 loop, then knit the front loop through the one just removed. The second row should be knitted with a face. The pattern is repeated until the end of knitting the elastic.
4. How long does it take to knit such an elastic band? For standard lace socks, it is enough to tie 16 cm of elastic. If desired, this number can be reduced or increased.

Knitted openwork socks for newborns (video)

Knitted openwork socks for women: a simple description

One of the easiest ways to create openwork socks is to knit them in a spiral. These women's socks are very cute.

The work consists of the following stages:

1. To begin with, materials are selected. You will need yarn and knitting needles. Circular knitting needles are used to knit socks.
2. Now cast on stitches on 4 knitting needles. The fifth spoke is a working one. For a medium-sized leg, cast on approximately 25 stitches.
3. The first step is to tie the elastic band. If the yarn is large, you can knit 1 by 1; if it is medium or small, then it is better to knit 2 by 2.
4. When knitting a sock after an elastic band, you should form a spiral-shaped circular fabric; to do this, you need to make 1 knit stitch on top of one purl stitch, and vice versa.
5. When more than 10 cm of the product is knitted, you need to try it on without removing it from the working knitting needles. This is necessary to determine the correct knitting density. If the sock fits too loosely on your foot or, conversely, too tight, it is better to unravel it and start again, casting on the required number of loops.
6. After the product has acquired the length desired by the craftswoman, a decrease should be made for the toe. The decreases are made evenly. In each group of loops, the same number of loops should be reduced for symmetry. It is recommended to use a pin so you don't forget where the circle starts.
7. These socks do not have a heel, this is their peculiarity.

These women's socks are very cute

Tip: Unfortunately, this pattern can stretch over time. However, this can be prevented; to do this, after washing, such work should be twisted in a spiral. They should dry in this condition.

Knitted children's openwork socks

Knitting socks for children is especially pleasant. There are a lot of ideas for such openwork works.

Here is one of them:

1. Children's socks should be made of warm threads so that the child's feet do not get cold. Therefore, preference should be given to either wool or wool blend yarn.
2. This knitting method is called "Ladybug". The yarn used here should be red and black.
3. It should be knitted in 2 threads. After casting on the loops, you can start knitting the elastic. Children's socks should not have an elastic band that is too wide, so you can do it 1 by 1.
4. After this, the cuff is knitted with red thread. To give it an openwork look, each knit stitch should be alternated with a yarn over. The second row is knitted with the wrong side. This creates small holes.
5. Next the heel is knitted. To do this, black thread is added to the work.
6. Loops are made along the edge sides of the knitted heel, and the knitting of the sock continues along the foot. The sock should have ladybug eyes. To do this, several symmetrical double loops are knitted on the front of the product with black thread.
7. At the end of the work, you need to turn the sock inside out and, using a hook, pull the protruding threads inside.

Knitting socks for children is especially pleasant

Knitted lace pattern on baby socks

Children's products can be knitted in any way you like. In this case, it is difficult to create a tasteless item, because children like colorful and bright products. They especially love clothes and shoes that remind them of some kind of animal or cute creature.

As for openwork patterns, there are a lot of them. A craftswoman can find such patterns in knitting magazines or on the Internet.

Here is one such pattern:

1. You need to choose yarn of two colors: light blue and white.
2. The first row is knitted in stockinette stitch. Further, in all circular rows, knitting occurs in the face method.
3. A pattern will form, so it is important to ensure that yarn of a different color does not lie on the right side of the product with the wrong side. To do this, the threads cross on the wrong side.
4. In order not to get lost and knit the pattern correctly, you can print out the diagram for yourself and put small dots with a pencil at the place where the master is currently “located”. This will help you not get lost.
5. The heel of the sock should be knitted in blue. In general, it is not recommended to knit the heel and foot area of ​​the sock in a light color, since all the dirt is visible on it.

Scheme of work

What will you need for your job?

First of all, you need to prepare the materials for knitting.

Among them:

• Yarn. You should not save on it, because not only the appearance of the future product, but also the period of its wear depends on the quality of the thread. The better the quality of the threads, the longer the product made from them will last the owner.

First of all, you need to prepare the materials for knitting

What composition is better to choose threads? The answer to this question depends on many factors. For example, if a craftswoman wants to make warm socks, she should not purchase acrylic threads, since this is a synthetic material that will not warm her feet. She should give preference to wool or mohair threads.

• Knitting needles. In this case, special knitting needles should be used for knitting socks. There are 5 of them in the set. It is best to use metal knitting needles.
• Hook. It is convenient for them to stretch the threads to the wrong side.
• Scissors. They are used at the last stage of work, when you need to pull the threads inside out.

• Those who are knitting lace socks for the first time should learn how to make regular socks, not lace ones. This is necessary in order to understand the principle of the work itself.
• The most difficult thing in this matter is knitting the second sock so that it is exactly like the first. To do this, it is important to knit them with the same density.
• To make the work more rainbow and more beautiful, it is worth using several colors of yarn.
• To extend the life of socks and prevent them from rubbing in the heel and foot area, you should use a special thread in knitting the bottom of the sock. It is very thin and serves to prevent the product from rubbing when walking.

Openwork socks with knitting needles: master class (video)

Knitting openwork lace socks is an activity that even a beginner can handle. The main thing in this matter is to follow the scheme correctly.

This is an indispensable item for harsh winters. In recent years, knitted socks for women have become not just warm clothing, but have acquired the status of a fashionable and stylish accessory. Previously, it was impossible to imagine them paired with light summer clothes, but at the moment you won’t surprise anyone with such a look. And new rules for their use have appeared.

Knitted socks models

There are many varieties of them. Knitted women's socks are not only short or classic, but also elongated, in the form of socks or knee socks, openwork, vintage, with additional fittings. The composition may contain not only wool, but also cotton. But synthetics are undesirable, unless they are thermal socks, since these clothes fit tightly to the legs.

Models vary in length: there are short ones that cover only the heel, or stockings that are fixed behind the knee; by style, knitting methods, pattern used, shade. The color scheme used is also varied. Here there is room for designers' imaginations to unfold; fashionistas themselves can also try their hand at creating this trendy accessory.

Knitted socks-slippers

This item is for home, so it should be convenient and comfortable. But beautiful knitted socks and slippers are no exception in the wardrobes of fashionistas. Home clothes should also be spectacular, not just cozy. This is a stylish alternative to ordinary slippers, which not only can be expensive, but are also unlikely to be perceived by fashionistas as a fashion accessory. Another thing is soft woolen socks and slippers.

These are cute attributes reminiscent of childhood. They do not restrict movement; you can either crawl into them on a winter evening under a blanket or a blanket on the sofa to read a book, or greet guests. This is practically a universal thing, suitable for children, men and women. And bright, catchy or themed decorations and interesting fittings will give them individuality.

Knitted socks with a pattern

This element can completely transform a thing. Knitted wool socks are a traditional and everyday item of clothing, the mention of which does not evoke strong associations with sophisticated style. But let’s imagine thin white fishnet stockings that hug the leg, and it becomes clear that they would be appropriate to wear with a dress or a skirt, with elegant high-heeled shoes. Patterns can be varied. Raised and patent ones are often used, and you can often see socks with braids.

Knitted openwork socks

Openwork curls add romance to the look. This does not mean that they cannot be combined with brutal or classic things, such as jeans. The contrast will emphasize the delicacy of the product and can make the socks the main accent of the image. Beautiful knitted socks are not uncommon. Handmade items made from wool, such as knee socks and hats, have become part of the everyday wear of inveterate fashionistas.

Don’t think that only openwork leg warmers knitted from thin cotton material are suitable for light summer clothing. Some things and images, even romantic ones, involve a combination with coarse knit socks when thick wool is used. You need to know how to put together such ensembles and wear them; making a mistake in choosing is unacceptable; just one flaw will make the look comical.

Knitted sneaker socks

This is a very unusual model for the most daring. Hand-knitted socks are a common thing; they won’t surprise anyone anymore. But knitted sneakers are exotic, a new trend. This is also clothing for the home; it is suitable for people of all ages, but will especially please teenagers. The lacing makes them very comfortable to wear, and sports motifs are often used in the design. More often, such items are knitted by fashionistas themselves.

Socks with knitted patterns

This is another type of familiar everyday clothing. Knitted socks with a pattern look very impressive and give the whole look a childlike spontaneity and recklessness. Such motifs are also very fashionable and in demand today. If the pattern is part of the knitting method and is applied to the entire product, then an individual, locally located pattern can be invented.

Which pattern should you choose for your item? It depends on personal preferences and the ensembles for which such accessories are intended. For household items, it is appropriate to choose almost any pattern, for a fashionable look - one that matches the general style. welcomed by fashion trends, but only if the image is complete and extremely harmonious.

Socks are a traditional, affordable item of clothing that you can make yourself by knitting them using knitting needles. It would seem, how can you decorate knitted socks so that they are the most beautiful? There are many options - these include classic braids, and the presence of openwork jacquard patterns of different configurations, not only for adults, but also for children. Let's look at the original patterns below and learn how to knit socks with beautiful patterns. Let's make sure that they can be used not only in dress fabric or when designing a sweater.

Knitting socks - several suitable patterns

Today, socks can be decorated with any patterns you like, sew on a balabon, symmetrically divide the color scheme, and also apply other ideas, including your own imagination, or by watching a video on the Internet. As a result, needlewomen receive warm, original socks with an element of openwork or other decors.

When knitting socks with knitting needles, it is possible to use various patterns. Today their availability on the Internet is great and there can be no problems with this. The most beautiful patterns and patterns are provided below. The main thing is to learn how to correctly knit the main elements of this item - the heels and toes. So, in order to knit the warmest and most beautiful socks, you need to build on your own skills, choose the appropriate yarn, the purpose and appearance of the future item.

If you plan to knit socks for children who will serve as foot warmers, then the best option would be thick yarn and a knitted pattern. A decorative model will be made from thinner yarn, using an openwork print or voluminous decoration (pompons, ruffles, appliqués). You can view diagrams and videos below:

Jacquard patterns - beautiful patterns

Jacquard is considered a classic, which is certainly in demand in the winter. But knitting them is a bit related to options with particularly complex ideas:

• you have to work synchronously with threads of different colors;
• you need to learn how to change them in a timely manner;
• create the correct thread tension;
• observe the required knitting density.

The optimal solution in the arrangement of jacquard motifs is stripes with patterns. They can be placed on the cuffs and on that section of the sock panel that is intended for decoration of this place.

To knit openwork socks for children, which are completely covered with a colored pattern, you need to repeat the selected pattern one by one, and so on until the item is completely ready.

The ornament can be alternated with several rows knitted only with facial loops, a single-color thread or other simple patterns. Schemes of the original ornaments are shown in the photo below:

Knitting socks - options for placing a pattern in the sock fabric

There are some options for the distribution of the pattern on the knitted fabric of the sock; they differ in the complexity and speed of the work. Thanks to them, needlewomen create many incredibly beautiful models, including openwork ones:

• ornaments occupying the entire panel;
• patterns on cuffs;
• ornaments for children in the form of elongated stripes.

When knitting socks using knitting needles, the main thing is to choose the appropriate pattern and the most beautiful patterns. Beginner knitters will do better with simple patterns that illustrate elements with a narrow longitudinal report. The vertical pattern will succinctly fit it into the fabric of the sock itself. The report, which is arranged in a checkerboard pattern, is more complex, and often the craftswomen get confused when calculating the loops where the heel begins to be knitted. This option can be used when decorating an even cuff when knitting socks for children. So, we looked at the topic: “Knitting socks, beautiful patterns” and a training video, now you can try to master this type of needlework yourself using a simple example.

We offer you a master class on knitting socks for a 6-9 month old baby. With the help of step-by-step photos you can do it yourself for both a boy and a girl. Colors can be chosen in classic options - blue and pink, or you can take a neutral range - yellow and green shades.

Below I will show you step by step how to knit children's socks with a pattern. If instead of blue and blue yarn you choose pink and red, you will get socks for a girl.

To knit socks with a pattern for a boy you will need the following materials:

• Nako bambino yarn, blue, meter 130 m/50 grams (wool 25% - acrylic 75%) - 30 grams;
• Nako bambino yarn blue, yardage 130 m/50 grams (wool 25% - acrylic 75%) - 20 grams;
• white Nako bambino yarn, meter 130 m/50 grams (wool 25% - acrylic 75%) - 20 grams;
• stocking needles No. 2.5 -3;
• scissors;

Children's socks with knitting needles with a pattern (pattern), for beginners - photo and diagram:

We start knitting socks for a baby by casting on stitches with blue thread. Take a pair of knitting needles and cast on 7 stitches. On the next pair of knitting needles we cast on 8 stitches. We take out one knitting needle from the first pair and cast on 8 more loops. Then we release another knitting needle from the second pair and cast on 9 loops. The number of loops on the first and last knitting needles is different, because then it is necessary to transfer one loop from the last knitting needle to the first. This will create a closed circle (on the knitting needles it looks like a square).


We begin to knit a 1x1 elastic band (1 knit stitch and 1 purl stitch). Alternately knit loops on each knitting needle.


We knit an elastic band with a height of approximately 2 - 2.5 cm. If you have an average knitting density, then it will be about 8-10 rows.


Then the pattern changes. We tie a blue thread. First we knit 3 knit stitches.


Then we pull up the blue thread and knit 1 knit stitch. We repeat the rapport again - 3 knit stitches with blue thread and 1 knit stitch with blue thread. Each knitting needle produces two repeats.


We knit the pattern described above on all other loops.


We knit the next row completely with facial loops, the thread is blue. Now we knit the blue loops again, but in a checkerboard pattern. To do this, we knit *1 loop with a blue thread, then with a blue thread, and again with 2 blue threads*. Repeat from * to *.
Tip: do not pull the blue thread too tight on the back side, otherwise the fabric will look tight on the front side. But don’t let it go too freely, in this case the blue loops will be loose and will try to crawl forward relative to the canvas. Medium tension is best, and do not forget that the fabric will be elastic and the thread should be of such length that it is sufficient when stretching the knitted fabric, say, when putting a sock on a baby’s foot.


We knit the next row again with facial loops, the thread is blue.
We knit three more repeats in height (one repeat is equal to 4 rows).


Next, cut the blue thread with scissors and fasten it. Now the working thread is blue. We knit 1 row with facial loops.


We begin to knit the heel of the sock. We knit a row on only two knitting needles and return, turning the knitting wrong side towards us. It turns out that the fabric increases only on two knitting needles. So we knit 10 rows (heel height).


We remove the loops of the shortened part of the sock onto one knitting needle to make it easier to knit the heel later.


We also remove the long part of the sock (heel) onto one knitting needle - 16 stitches in total.


To form the heel, it is necessary to decrease the loops in the middle part of the fabric. We do it as follows - we knit 4 loops, and we knit the 5th and 6th together. Then again 4 loops and two together.


In the next row, first we knit 3 loops, then two together, 4 loops, two together and again 3 loops. The number of loops in the middle (between decreases) does not change. Only the loops on the sides are decreased.


So we make decreases until only the middle loops remain on the knitting needle - 6 pieces in total.


Now we switch again to knitting on four knitting needles. We cast on loops on the side of the heel, passing the knitting needle and thread between the walls of the edge loops.


We again divide the shortened part into two knitting needles.


We also cast on loops on the second side of the heel.


There should be 8 loops on each knitting needle. If you don’t have enough, then simply knit another loop on the desired loop, making a yarn over in the middle of the fabric.


We tie a white thread. We knit two rows with facial loops.


We knit 18 rows, alternating two rows of white and two rows of blue.


We begin to make decreases to finish the toe. We knit the first two loops together.


We make decreases on each knitting needle.


We continue to decrease until there is one loop left on each needle.


After this, we knit all four loops together.


We cut the thread and hide it on the wrong side. One baby sock is ready.


Now all you have to do is knit a second sock with the same pattern and your baby’s feet will be warm.

It is in vain that many people consider knitting socks an uninteresting and dull activity, completely unrelated to creativity. This is wrong! With a little skill, effort and patience, you can create not just socks, but a real masterpiece that emphasizes the old truth: beauty is everywhere.

Even knitting socks can be approached as creating a favorite accessory or an exclusive gift that will be welcomed. So, the topic of this article is knitting openwork socks, or rather, choosing a suitable pattern.

It is no secret that openwork patterns, even the simplest ones, are always exquisite and are not loved. Therefore, the knitting thread should be medium, closer to fine. The meter of a hundred-gram skein will serve as a guide: the optimal thread length for a good openwork is 500-600 meters. Socks made from yarn of this thickness will be moderately thin and warm. The composition of the thread can be anything, it all depends on your own preferences, but experienced craftsmen recommend choosing high-quality wool yarn with the addition of polyamide fiber to strengthen the product and extend its service life.

Today there are special series of sock yarns produced by many manufacturers, with a composition of 70-75% wool and 25-30% polyamide. Note that masters are supportive of this category and speak very positively about it. Material consumption is approximately 100 grams per pair of socks.

Required Tools

They perform the work on five toe knitting needles (they are also called needles, since there are no clamps on them). For thin yarn, the tools must also be proportionate, so needles No. 1.5-2 are the most suitable option. In the process of work, you may need special markers, which can serve as paper clips, multi-colored yarn scraps, etc.

Choosing patterns for socks

Approximately this pattern is shown in the second photo - an openwork strip of diamonds, emphasized by a small braid, framed along the edge by a thin openwork path. The article will consider several options for patterned knitting of a sock: completely openwork, textured tracks, alternating braids with openwork stripes.

Openwork socks with knitting needles: patterns

Let's start with the simplest drawings that form simple openwork paths. Since even the most primitive openwork significantly decorates the knitted fabric, this is the best option for beginner knitters. So, let’s look at the question of how to knit openwork

Schemes of a narrow and wide openwork path:

A narrow strip of openwork involves 5 loops, but it is necessary to highlight the pattern on the canvas by adding a purl loop on each side.

The path runs like this:

1 p: ​​1 yarn over (H), from 2 loops knit one knit stitch (VL), 1 knit, 2 VL, 1 N.

The 2nd and all subsequent even circular (after all, the sock is knitted in the round) rows are knitted according to the pattern.

From the 3rd to the 7th rows: 1 knit, 1 H, 3 VL, 1 knit.

From the 9th row the pattern is repeated. In the diagram, the resulting openwork path is edged with a small braid from the overlap of two loops. The number of rows of intersection repeat depends on the master.

A wide strip of openwork can serve as an independent pattern that completely occupies the canvas. The photo shows exactly this option. The “Hearts” pattern is a repetition of a strip consisting of 13 loops. Pattern repeat - 16 rows. The generally accepted symbolism of loops used in the diagram will help you figure out the drawing yourself.

Openwork socks knitted with similar patterns (patterns are presented in the review) are simple to make and quite within the capabilities of novice craftswomen.

Pattern "Leaves"

Modern craftsmen skillfully use the excellent decorative properties of this pattern in many models. Socks were not left out either. The presented photo shows white socks with a central openwork stripe made with a “Leaf” pattern.

Let's get acquainted with the procedure for performing this simple but very effective drawing.

The pattern repeat is 10 rows and 27 loops, which almost completely covers the front of the sock. Knits like this:

1 r: 9 knit, 2 VL, 1 N, 2 knit, 1 knit, 2 knit, 1H, 2 VL, 9 knit.

2 r: 8 i., knit 2 loops purl. (VI), 2 from., 1 N, 1 from., 1 person., 1 from., 1 N, 2 from., 2 VI, 8 from.

3 r: 7 knit, 2 VL, 1 knit, 1 N, 3 knit, 1 knit, 3 knit, 1 N, 2 VL, 7 knit.

4 r: 6 p., 2 VI, 3 p., 1 N, 2 p., 1 knit, 2 p., 1 N, 3 p., 2 VI, 6 p.

5 r: 5 knits, 2 VL, 2 knits, 1 N, 4 knits, 1 knit, 4 knits, 1 N, 2 knits, 2 VL, 5 knits.

6 r: 4 p., 2 VI, 4 p., 1 N, 3 p., 1 knit., 3 p., 1 N, 4 p., 2 VI, 4 p.

7 r: 3 knits, 2 VL, 3 knit, 1 N, 5 knits, 1 knit, 5 knits, 1 H, 3 knits, 2 VL, 3 knits.

8 r: 2 p., 2 VI, 5 p., 1 N, 4 p., 1 knit, 4 p., 1 P, 5 p., 2 VI, 2 p.

9 r: 1 knit, 2 VL, 4 knit, 1 N, 6 knit, 1 knit, 6 knit, 1 H, 4 knit, 2 VL, 1 knit.

10 r: 2 VI, 6 from., 1 H, 5 from., 1 face, 5 from., 1 H, 6 from., 2 VI.

From the next row the pattern begins to be knitted again. Such a floral pattern in the central part of the product is a very successful option, which combines simplicity of execution and the effectiveness of the finished product. This pattern makes it easy to knit openwork socks with knitting needles. The description of how to make the central stripe should also not cause any difficulties.

Overlaps, plaits and braids in knitting openwork socks

Openwork patterns when knitting socks are often complemented by various weaves - braids, medium-sized arans, elongated loops and other decorative techniques.

You can give many examples of successful combinations of openwork and braids, but it is impossible to talk about all the drawings in one article, and it is not necessary. The models presented in the photographs clearly illustrate the possibility of combining various weaves with openwork inserts or stripes.

Often there are small braids, in the intervals between the overlaps of which craftsmen make openwork holes. Sometimes narrow arans are used, giving additional density to the product and contrasting with the delicate textured paths.

In a word, patterns for socks can be composed in different variations. Another important rule: the work must be done carefully, trying to pull the working thread with equal force so that the fabric is even and equally dense. If these simple conditions are met, openwork socks with knitting needles, the pattern diagrams for which we have reviewed, will become original and unique.