home › parables › Folk dress for girls. The most beautiful Russian sundresses - ideas, tips

Folk dress for girls. The most beautiful Russian sundresses - ideas, tips

Page content

Russian folk costume is an amazing clothing created by women who lived in Rus'. Such a costume is an expression of a bright feature of the nationality, combining amazing techniques: embroidery, weaving and knitting.

Russian folk costume originates in the 12th century. It was worn by people of all classes: peasants, boyars, merchants. Such a costume was a reflection of the pedigree and contained information about what certain people were doing.

The patterns we have collected will help you sew a Russian folk costume for any height. Sewing a Russian folk costume according to patterns is possible even for those who have never dealt with sewing.

1. Making a sundress for a Russian folk costume is quite simple. To begin with, we take measurements from the child. The sundress of the Russian costume consists of:

front panel 1 piece;
back panels 1 detail;
straps 2 parts;
inserts 2 parts;
plating of the upper part 2 parts.

The pattern below is prepared for children from 120 to 140 centimeters tall.

This pattern must be transferred to the selected material and cut out. The material must be selected in red, blue or orange colors. Pay attention to the brightness of the fabric. Such material should emphasize the peculiarity of the Russian costume.

We begin to assemble our costume according to the following algorithm:

to begin with, we sew on the sides the elements of the front, back and inserts;
then the top;
sew on straps;
we decorate the edges of the dress of the costume with a red cloth.
Russian folk costume is ready.

Kokoshnik is a headdress that was worn on holidays in Rus'. Only married women could wear it. All this began in the 16th century. The kokoshnik looked like a high crown, to which a cloth was attached, behind which the hair was hidden.

Making a kokoshnik with your own hands is not a problem if you have the desire and the necessary materials:

cardboard;
textile;
scissors;
glue;
accessories: lace, braid, rhinestones;
tape measure.

First we need to make the basis for the kokoshnik. We will make it out of cardboard. Please note that the kokoshnik should go from ear to ear along the forehead. It is according to this algorithm that you measure the distance.

Next, we need to cover the front of the kokoshnik with a cloth. To do this, we put the kokoshnik on the fabric, retreat from each edge by 2-3 centimeters and draw a contour. Next, cut along the contour and start constriction. We use glue to fix the fabric. At the same stage, we glue the tape that will support the kokoshnik on the head.

Now let's get down to the decorative moment. We take the accessories that you have chosen for the kokoshnik and trim the front.

Kokoshnik is ready!

Do-it-yourself kokoshnik for a Russian costume photo

Russian folk costume for a boy consists of two parts - a kosovorotka (shirt) and pants. In order to sew a kosovorotka, we need:

Fabric - linen or cotton;
Sewing machine;

According to this scheme, sewing a blouse is not difficult. To begin with, according to the pattern, we will cut out our future shirt from the fabric. We get the main part, 2 sleeves and 2 gussets.

Sew the gusset to the edges of the sleeves, as shown in the photo.

The resulting parts are applied to the main part and sewn with a machine.

Now you need to bend the sleeves and sew them. After that, we sew the base.

The kosovorotka is ready. Now let's move on to the decorative part. Let's make the neck first:

We decorate the shirt with a beautiful ribbon

Skewed swing sundress

A skewed open sundress, or a sarafan with a seam in front (klinnik, skew-wedge, seven-wedge, kostych, sukman, cashmere, koshto) is the second type of folk women's sundress.
The shape of the sundress is trapezoidal, consisting of two panels, connected in the front in the middle with a button closure or a seam. The shape of the sundress was complemented by a panel along the back and wedges of various sizes and differed in the principle of narrowing and expanding. Having measured the desired size of the top of the product, shelves and backs, the excess fabric was cut off and supplemented with it at the bottom of the product.

CONSTRUCTION OF THE SHAPE OF A SKIN SARAFAN WHEN THE WIDTH OF THE FABRIC 1 M 40 CM
Dimensional signs of a figure (measurements): product length; From I, From II, Shg, Shs - the specified value of the size is 17-20 cm, ShPr - is calculated. The length of the product - from the line From 1 to the desired length, just below the ankle.
1. We take 2 lengths of a fabric product with a width of 1m 40 cm.
2. Shelf:
determine the center, lay with a colored thread or soap
from the center to the left and right, put off the tuck by 1 cm or 1.5 cm, draw a line
determine the width of the chest, set aside Wg to the left and right of the tuck
we determine the depth of the armhole, from the end points of the width of the chest we lay down 6-7 cm, draw lines to the left and right
def I - (Ws 20 cm + Wg) \u003d: 2 \u003d
from the end points of the armhole on the left and right sides, we draw diagonal lines to the corners of the bottom line of the fabric panel
we cut out the shelf part with scissors, turn over the excess fabric in the form of a wedge and apply it to the side of the shelf part, thus expanding the shape of the shelf into a trapezoid.
3. Back: the second panel of fabric
determine the center of the canvas
determine the height and width of the strap holder H = 4-5 cm, width 3-4 cm; the width of the strap holder is determined depending on the width of the straps
from the center of the back we set aside 17-20 cm (dividing in half) to the left and right
from the end points of the back we draw diagonal lines to the corners of the bottom line of the fabric panel
we cut out the back detail, the excess fabric in the shape of a triangle - the wedge is turned over and applied to the side seam of the product, i.e. to backrest piece 98
straps: we determine the length and width of the straps, cut out the upper and lower part of the strap, the strap is complemented by a padding part, which is inserted between the two main parts
4. Cut the lining of the sundress.
According to the folk traditions of tailoring, the skew-wedge sundress was duplicated, mainly the shelf was duplicated. The back was not duplicated, because it has a stronger wedging than the shelf. A sundress can be duplicated in two ways:
The first way, when the entire shelf and the bottom line of the sundress are duplicated by the so-called "podolnik" 12-15 cm high.
The second way to duplicate a sundress is to process the sundress with lining fabric (chintz, canvas) to the waist line. The cut of the lining is made according to the same principles of cutting, which is present in the sundress.
All cut lines, straps, the upper part of the sundress - shelves and backs, the bottom line of the product - are processed with a colored roller.
Materials for sewing a sundress: silk, wool, wool mixture.
Lining materials: chintz, coarse calico, linen canvas.
Materials for decorative design: golden-colored ribbons, jacquard weave, round buttons on the leg, cord for loops, ornamental or one-color braid. Colored roll (inlay).

TUNIC SHIRT

The cut of the shirt is made to the width of the canvas - 40 cm. A tunic-shaped shirt consists of a central panel, consisting of two lengths equal to the length of the product, side panels of the sleeves and wedges.

Shirt fit
1. Sketch.
2. Preliminary calculation.
3. Dimensional signs.
Length of the product; arm length; neck girth.
Cut of the central panel: we take 2 lengths of the canvas, equal to the length of the product (D. ed.)
We bend the canvas panel in half, one part of the panel falls on the shelf, the other on the back.
We find the center of the panel, to the left and right (horizontally) we set aside 8-9 cm, vertically from the center we lay off to the back - 4 cm, to the shelf 8-9 cm. We make the neck with smooth lines and make a cut along the shelf (bosom).
Sleeve cut
We take three lengths of the panel, equal to the length of the sleeve, the length of the arms.
We leave two lengths of the panel intact, cut the third length in half and attach to the two previous panels. Sleeve width - 40 cm (canvas width) and 20 cm of an additional panel.
The sleeve width is 60 cm.
Cut of side panels
The length of the side panels of a tunic shirt is:
length of the product -
arm width - 30 cm, length of side panels 90 cm. Panel width - we take two lengths of canvas (side panels) equal to 90 cm, each cut 90-20 cm, adjacent to the sleeve and the central panel in the side part (on the left and right sides ).
Cut wedges
The traditional wedge shape solution is a square and a triangle. Wedges can be one-piece or with a seam. For a one-piece wedge, we use a square 17 × 17 cm or 15 × 15 cm.
When sewing, we bend one wedge diagonally in the hits, one part falls on the back, the other on the shelf.
Turning cut.
The facing is cut diagonally. Turning width 1.5 -2 cm.

FOLK WOMEN'S SHIRT WITHOUT POLES
Folk women's shirt without polka dots is made of thin linen, 65 cm wide.
A shirt without poliks includes a camp, a camp, sleeves, wedges.
Stan - the lower part of the product, consists of two parts, length - 75 cm, width - 65 cm.
Stanushka - sleeves - 2 lengths of linen were used to solve the sleeves, 40 cm long,
65 cm wide /40×65 cm/.
Supplement the width of the sleeve 2 pieces of fabric, measuring 40 × 15 cm, the total width of the sleeve is
80 cm
Wedges - one-piece, 2 parts for the back and shelves, dimensions 8 × 15 cm.
Coquette - 2 parts, back - length 28 cm, width - 50 cm / 28 × 50 cm /. Shelf - length 23 cm,
width 50 cm. A difference of 5 cm in the length of the coquettes is given for the fit of the product and the design of the neck.
This method is a late decision, there are also such options when the coquettes are cut to the same length.
Features of a shirt without polyk.
In the folk cut of a shirt without poliks, the width of the yoke is almost always less than the width of the camp / the width of the yoke is 50 cm, the width of the camp is 65 cm.
When connected, these parts of the shirt have a ledge shape, the ledge on the "stand" is the place
for the location of the polys that replace the sleeves.
The neck and sleeves in a shirt without poliks are collected in small folds, the neck is sheathed with a facing
1.5-2 cm, cuffed sleeves 6-7 cm.
A shirt without poliks has embroidery, a composition of a curb structure, 4.5 cm high, runs along the camp, embroidery - “painting”. The ornament is zoomorphic with the exception of a plant motif /bird + tree/. Stanushka: sleeves / main panels /, facing and cuffs are embroidered with satin stitch and “cross”, mesh and linear rapports. Geometric ornament: eight-pointed and four-pointed rosettes.

HATS
Collection (povoynik) - a headdress of a married woman. The shape of the headdress consists of 2 parts: the bottom and the headpiece. The headband is made of satin, the bottom on a solid basis (cardboard, canvas, brocade, methonite) is embroidered with gold or silver thread. Floral ornament "tree of life". The headdress is made on a lining, the material of which is printed chintz. The lining is cut out in the same way, according to the same principles as the warrior. The bottom and neckline of the lining are sewn together, inserted into the headdress, fixed along the top line around the bottom with air loops. The bottom line of the warrior, together with the lining, is processed with an oblique trim of a different color and tone.
Building a headdress. Description of the cut. Dimensional signs of the head (measurements): O. (girth) of the head - ... W. (width) of the forehead - Ochelie: horizontally lay off the O. head. - ..., along the central axial line, the height of the part is 8-9 cm, the height can be less or more.
The height of the ochelie in the back of the head is 2-3 cm less, i.e. from the central part of the part are narrowed. The details of the bodice are cut as follows: one of the main fabric, the other of the lining.
The bottom is oval in shape, along the central vertical line it is 21 cm high, and 14.5 cm along the horizontal line. The details of the bottom are cut from the main, lining and lining fabric.
Karelian women's headdress - "Magpie" The shape of the headdress is soft, elongated, in the form of a tied scarf.
"Magpie" consists of 2 parts: bottom and ochelya.
Ochelie: the central part of the headdress, made of red satin and embroidered with yellow-orange threads, geometric ornament. The pattern of the ornament is underlined with a black thread.
The decorative design of the ochelya included poets. To the eye, to the central part, pieces of expensive fabrics (velvet, silk) are sewn.
They continue the shape of the headband with ties, which are made of satin of a different color and tone.
Donets - the upper part of the headdress - is made from expensive factory
materials: plain silk or with a color pattern. The headdress is hemmed with a cotton lining.
The lining is cut in the same way as the upper part of the headdress. The bottom line of the “magpie” headdress is processed with a colored roll.
Construction of the form of the female headdress "Magpie".
Dimensional signs (measurements):
O. (girth) of the head - ..., W. (width) of the forehead - ...
Ochelle: horizontally lay off O goal. - 57 cm, we find the center, determine the height of the headband 9 cm. We note the width of the forehead (the width and height of the central part of the headdress). W.- 13 cm, h - 7.5 cm.
At the ends of the part, we determine the height of the ties 5-7 cm, connect the points.
Donets - has a length of 40-41 cm along the central axial line, at the top of the detail in the area of the ochelya, the width is 5-6 cm, the bottom line is rounded and has an oval shape, at the bottom the width of the detail is 20 cm.

Not only famous names and significant events form the basis of the national history of any nation. It also differs in national clothes, which everyone has without exception. And if in most cases it remains just a decorative element for performances and presentations in museums, then the Russian folk sundress is becoming more and more popular today as everyday wear.

Despite its popularity, it is not so easy to buy it, and it costs a lot, but if you want to have such a sundress, sew it yourself.

Pattern of Russian folk sundress

To build a pattern, you need to take 3 measurements: length from shoulder to chest, chest circumference, length from chest to floor. Then build a big rectangle. Its width should be equal to the half-girth under the bust, and the height should be equal to the length of the product. It is also necessary to leave 4 cm for seam allowances.
Next, cut out the top. It is necessary to draw a trapezoid, the height of which is equal to the length from the top of the chest to the line where the hem of the sundress begins, round off its sides under the armholes. Then build a pattern of straps of any width. Its length should be equal to the size from the shoulder to the beginning of the chest, multiplied by 2 with the addition of allowances for the seams. The pattern should be transferred to the fabric, and then cut out in 2 parts.

For a pattern of a Russian folk sundress according to the old sewing method, you will need 8 m of viscose silk for a sundress, 5 m of linen for a shirt, 4 m of white calico for a petticoat, 3 m of white calico for a lining, 3 m of voile silk for a shirt.
The classic Russian folk sundress consists of 6 parts with lining up to the hips. 2 parts go to the sides, front and back. All seams in the sides are sewn up to the waist, on the chest and back - darts along with the lining. In the center of the back, at the back, the fold is sewn up to the waist, and then goes freely. In the form of a clasp, a row of glass colored buttons usually runs down the center. The trim of the sundress is a simple lace with curly braid.
A shirt for a sundress is embroidered along the hem. Wedges are inserted into the sides of the sleeves and shirts from below. The sleeve, cut from a straight cloth, is gathered at the shoulder several times and, overlapping, forms a short shoulder. At the wrist, the sleeves are cut out with teeth, then gathering on an elastic band, they form frills. The fasteners and collar of the shirt are trimmed with white curly braid and narrow lace.

Russian sundress for girls

Start the sewing process by choosing the material, paying attention to the brightness and quality of the fabric. The Russian sundress should look solid, bright, or have an ornamental pattern. If a shirt is selected for a sundress, the fabric can be selected to match its finish. Now you can start building a sundress pattern. To do this, measure the height of the girl from the floor to the armpits. This measurement will be the length of the sundress, but for the girl, sew the outfit not to the floor, as for adults, but a few cm higher.

Measure your bust and increase the size by 2.5 p. This measurement will become the width of the skirt. If you want to make a sundress flared down, sew it from 4 parts that expand towards the hem.
Then cut out the rest of the pieces. Draw a yoke by drawing a strip, the length of which coincides with the girth of the chest with the addition of 6 cm on each side. Its width is from 10 to 12 cm. Open the straps 10 cm wide and 40 cm long. Cut off the extra parts when trying on. Sew the side seams and overcast the edges. Position the first seam at the back, but do not sew it to the end, leaving a small place for the fastener. Bend the edges of the fastener and sew upside down from the edge by 1 cm in the form of the letter “P”.
On the top of the sundress skirt, make a line with large stitches. It must be pulled together so that the length becomes 4 cm less than the length of the yoke. Distribute the folds evenly. Sew the yoke and align in the center. After that, the joint should be in the area of \u200b\u200bthe fastener. Together with the upper cut of the skirt, overcast the edges of the coquette.
Bend the yoke in 2 rows, so as to sew the ends from the inside. After turning them out and, bending the free side of the yoke, manually baste. Then sew on the sewing machine. To make the seam even, you can sew the wrong side of the coquette with blind stitches before that. Overcast and hem the hem. Sew the button on the yoke and make a loop on the other side.
Sew the straps along the length from the inside and turn out. Sew them to the front so that the edge from the inside is in front. Put on a sundress for a girl and determine the length of the straps, cutting off the excess. Sew the straps at the back closer to the center, so they will not fall off the shoulders. Finish it with decorative ruffles, satin ribbons along the hem, along the straps and top.

Sundress in Russian style

You will need 2.5 m with a width of 110 cm of satin and plain chintz, 2 m with a width of 90 cm - colored fabric in a small pattern, 10 m of lace, pattern paper, a centimeter tape. First, measure the width of your chest and back. Build a pattern on paper, taking into account these dimensions.

Cut out 2 pieces from colored fabric, which will become the straps and yokes of the sundress. From the remnants of the fabric, cut ribbons 10 cm wide, they can be used for finishing. Cut out 2 trapeziums from plain fabric and determine their height, given the desired length of the sundress. Build the upper base of the trapezoid different, and the length of the bottom equal to 110 cm. Also, the front panel should be 8 cm, and the back should be 5 cm more than the width of the back.
After running the colored tape down the center of the front and the tape along the seam, sew them together. Sew the sides of the back and front panels. Finish the hem with colored trim tape along with the tape along the seam. Smooth out the hem. Sew with a large stitch the upper part of the panels, gathering along the width of the lower part of the coquette “in a drawstring”.
Sew the yoke together with the bottom of the sundress. Iron all seams from the inside and process. Fold the straps in half, stitch and tape along the edge. Iron the straps and, putting on a sundress, adjust their location. Then stitch to the yoke. Your Russian folk sundress is ready.

Russian folk sarafan is a sleeveless garment of a peasant women's ethnic costume. The model of a simple cut is a one-piece or consisting of a bodice and a skirt, an elongated design on the straps of a tight-fitting silhouette, flared, with a high waist or a detachable belt.

runivers.org

The traditional model underwent various changes from the 12th to the early 20th century. In modern fashion, the product exists in a stylized form. A popular option for the length of the product is to the floor.

Design features

Historically, each Russian region had its own style of folk costume. Patterns of Russian sarafans differed depending on the age, social and economic status of the woman.

moda.jofo.me

Initially, the products were multi-component and heavy. Models were sewn from wool and dyed in dark colors. At home, satin light options were used. The ability to sew models from colored fabrics produced in a factory way was given to Russian peasant women at the beginning of the 19th century.

Styles of a traditional product

Straight, slightly flared.
Straight with a continuous seam in front (with a fastener from a row of buttons).
Flared (slightly or strongly), consisting of a bodice and a skirt.
Flared with the help of side wedges cut along the oblique.

The classic model is made up of six parts and is lined to the level of the hips. The front, back and side panels consist of two parts. Side seams are at waist level. The fold, located in the center of the back at the back, is sewn at waist level, and then lies freely.

When cutting a simple model, the values \u200b\u200bof the waist and hips can be neglected.

The clasp - a continuous row of colored glass buttons - runs along the center of the front panel. The model is finished with lace, complemented by a curly-type braid.

Full closure product

The wide model (or the design with tucks in the waist area) is supplied with a front solid button closure.

club.season.ru

Before you sew a Russian women's suit of a similar style, you need to decide on its length and take the main measurements:

length from the edge of the shoulder to the level of the chest;
chest girth;
length from chest level to the bottom of the product (ankle).

Progress

The basis of the cut is a three-dimensional rectangle. Its width is determined by the value of half the girth of the torso under the chest. The height of the rectangle is the length of the finished product. Allowances for processing edges reach 4 cm.
The upper part of the model is a trapezoid with a height equal to the length from the top of the chest to the line of the beginning of the hem. The sides of the chest line should be rounded off in order to build armhole cutouts.
The width of the straps varies according to the overall width. The length is equal to twice the distance from the shoulder to the beginning of the chest area.
In order to correctly tailor the model, the construction details are transferred to the fabric, taking into account allowances.

Flared wide model

The free product is supplied with straps, originating from the center of the front panel and ending in the armhole area on the back.

sarafany.narod.ru

In this case, you will need to determine the distance from the hem to the level of the armhole cutouts (product length). As well as chest circumference, increased by 2.5 times (the width of the skirt part).

Details of a cut sundress

Front panel - 1.
Back panel - 1.
Wedges - 4.
Straps - 2.
Top stitching - 2.

Progress

Sew a skirt from two panels, and then the product will turn out straight. The A-line model is created using four wedges cut along the oblique. Wedge-shaped fragments connect the main panels on the sides. They can be folded from small tissue segments (flaps). Shelves and back in this case can be supplied with patch pockets.
The yoke looks like a strip, the length of which corresponds to the measurement of the girth of the chest. On each side, the strip is extended by 6 cm. The width of the coquette is 10-12 cm.
The width of the straps will be 10 cm, length - 40 cm.
The parts to be sewn are first joined at the sides.
The first central seam is located at the back, but does not close completely. At the top, you need to leave an open space for the neckline and one button above it.
A product of a similar cut involves the use of yoke straps and colored ribbon trim.

Progress

Two parts are cut out of the fabric of the same color, which will simultaneously serve as straps and parts of the coquette.
The product is finished with a ribbon of the same type, 10 cm wide.
Two trapezoidal parts are cut out of the fabric, their height is equal to the length of the product.
It is necessary to ensure that the width of the back panel is 5 cm larger than the measure of the back width.
The lateral edges of the coquette fragments are connected. The top is processed with decorative braid.

sukhum-moscow.ru

The “floor-length” model, made of silk or cotton fabric in bright colors, is complemented by a white shirt to the level of the hips (the material of the model is silk, linen). It is good if it is decorated with small floss embroidery. The lower section of the shirt is supplied with wedges.

club.season.ru

A straight type sleeve is assembled and laid in the shoulder area. The long sleeve (to the wrist) is shaped with carved teeth and gathered with an elastic band.

The neckline and clasp are decorated with a narrow lace strip and curly-type braid.

Despite its popularity, it is not so easy to buy it, and it costs a lot, but if you want to have such a sundress, sew it yourself.

Pattern of Russian folk sundress

To build a pattern, you need to take 3 measurements: length from shoulder to chest, chest circumference, length from chest to floor. Then build a big rectangle. Its width should be equal to the half-girth under the bust, and the height should be equal to the length of the product. It is also necessary to leave 4 cm for seam allowances.
Next, cut out the top. It is necessary to draw a trapezoid, the height of which is equal to the length from the top of the chest to the line where the hem of the sundress begins, round off its sides under the armholes. Then build a pattern of straps of any width. Its length should be equal to the size from the shoulder to the beginning of the chest, multiplied by 2 with the addition of allowances for the seams. The pattern should be transferred to the fabric, and then cut out in 2 parts.

For a pattern of a Russian folk sundress according to the old sewing method, you will need 8 m of viscose silk for a sundress, 5 m of linen for a shirt, 4 m of white calico for a petticoat, 3 m of white calico for a lining, 3 m of voile silk for a shirt.
The classic Russian folk sundress consists of 6 parts with lining up to the hips. 2 parts go to the sides, front and back. All seams in the sides are sewn up to the waist, on the chest and back - darts along with the lining. In the center of the back, at the back, the fold is sewn up to the waist, and then goes freely. In the form of a clasp, a row of glass colored buttons usually runs down the center. The trim of the sundress is a simple lace with curly braid.
A shirt for a sundress is embroidered along the hem. Wedges are inserted into the sides of the sleeves and shirts from below. The sleeve, cut from a straight cloth, is gathered at the shoulder several times and, overlapping, forms a short shoulder. At the wrist, the sleeves are cut out with teeth, then gathering on an elastic band, they form frills. The fasteners and collar of the shirt are trimmed with white curly braid and narrow lace.

Russian sundress for girls

Start the sewing process by choosing the material, paying attention to the brightness and quality of the fabric. The Russian sundress should look solid, bright, or have an ornamental pattern. If a shirt is selected for a sundress, the fabric can be selected to match its finish. Now you can start building a sundress pattern. To do this, measure the height of the girl from the floor to the armpits. This measurement will be the length of the sundress, but for the girl, sew the outfit not to the floor, as for adults, but a few cm higher.

Measure your bust and increase the size by 2.5 p. This measurement will become the width of the skirt. If you want to make a sundress flared down, sew it from 4 parts that expand towards the hem.
Then cut out the rest of the pieces. Draw a yoke by drawing a strip, the length of which coincides with the girth of the chest with the addition of 6 cm on each side. Its width is from 10 to 12 cm. Open the straps 10 cm wide and 40 cm long. Cut off the extra parts when trying on. Sew the side seams and overcast the edges. Position the first seam at the back, but do not sew it to the end, leaving a small place for the fastener. Bend the edges of the fastener and sew upside down from the edge by 1 cm in the form of the letter “P”.
On the top of the sundress skirt, make a line with large stitches. It must be pulled together so that the length becomes 4 cm less than the length of the yoke. Distribute the folds evenly. Sew the yoke and align in the center. After that, the joint should be in the area of \u200b\u200bthe fastener. Together with the upper cut of the skirt, overcast the edges of the coquette.
Bend the yoke in 2 rows, so as to sew the ends from the inside. After turning them out and, bending the free side of the yoke, manually baste. Then sew on the sewing machine. To make the seam even, you can sew the wrong side of the coquette with blind stitches before that. Overcast and hem the hem. Sew the button on the yoke and make a loop on the other side.
Sew the straps along the length from the inside and turn out. Sew them to the front so that the edge from the inside is in front. Put on a sundress for a girl and determine the length of the straps, cutting off the excess. Sew the straps at the back closer to the center, so they will not fall off the shoulders. Finish it with decorative ruffles, satin ribbons along the hem, along the straps and top.

Sundress in Russian style

Cut out 2 pieces from colored fabric, which will become the straps and yokes of the sundress. From the remnants of the fabric, cut ribbons 10 cm wide, they can be used for finishing. Cut out 2 trapeziums from plain fabric and determine their height, given the desired length of the sundress. Build the upper base of the trapezoid different, and the length of the bottom equal to 110 cm. Also, the front panel should be 8 cm, and the back should be 5 cm more than the width of the back.
After running the colored tape down the center of the front and the tape along the seam, sew them together. Sew the sides of the back and front panels. Finish the hem with colored trim tape along with the tape along the seam. Smooth out the hem. Sew with a large stitch the upper part of the panels, gathering along the width of the lower part of the coquette “in a drawstring”.
Sew the yoke together with the bottom of the sundress. Iron all seams from the inside and process. Fold the straps in half, stitch and tape along the edge. Iron the straps and, putting on a sundress, adjust their location. Then stitch to the yoke. Your Russian folk sundress is ready.

If you want to buy unique clothes for your wardrobe that will not leave any man indifferent, sew a Russian folk sundress. This primordially Russian clothing has always occupied a special place in every woman's wardrobe and today is back in fashion. A varied style of patterns, beautiful fabrics, decorative elements of decoration - all this will help the owner of a sundress in the Russian style to easily create an airy and feminine look.

Popular in category: