How to do ripped jeans correctly. How to make ripped jeans? How to make holes in jeans at home

1. Old jeans. Blue, black or light blue - it doesn’t matter. The main thing is that they fit you well. Classics and boyfriends are perfect, but you need to be careful with styles like skinny. If the pant leg is too tight on the thigh, there is a risk that the tight skin will fall out through the slits.
2. Chalk, soap or felt-tip pen. Will be needed to mark future holes.
3. Sharp scissors or utility knife. It is more convenient to make large cuts with tailor's scissors, and small ones with manicure scissors. So prepare both. You can also make holes with a stationery knife - whatever is more convenient for you.
4. Tweezers and knitting needle or darning needle. You will need tweezers to pull out unnecessary threads from the fabric, and a knitting needle or needle to make fringe along the edges.
5. Pumice, sandpaper and bleach. They can be used to give jeans a more distressed look.
6. Wooden cutting board or thick cardboard. With them it will be more convenient to cut and rub holes, because you won’t be afraid of damaging the lower part of the trouser leg.

Customizing requires creativity, patience and time. It may take you a few hours to alter your jeans the first time, but the results are worth it.

Step 2. Make the markings

Random perforation can result in the item ending up in the trash. For example, you should not make holes too close to the belt. Such slits are only acceptable if the peeking pockets are part of the creative design.

Before you take out the scissors, put on your jeans and draw where the holes and scuffs will be located.

Pinterest.com

To be sure, find photos of ripped jeans in your style. Choose the most successful location, in your opinion, and proceed by analogy.

brako.com

Step 3: Make holes

To get a long transverse hole on the knee, make one cut with a utility knife, after placing a board under the fabric.

If the marked holes are larger, you will have to not only cut, but also pull out the threads. Denim is like a mesh: white horizontal threads alternate with blue vertical ones. Your task is to get rid of the latter and not damage the former.

Using scissors or a utility knife, make several horizontal cuts in each marked area so that the distance between them is 1-2 cm.

apairandasparediy.com

The process may be slow at first, but after a while the blue threads will become more pliable and you will end up with only white threads.

To age holes, loosen the edges slightly with a knitting needle or simply rub them with a pumice stone.

Step 4: Distress and embellish your jeans even more

Wash and dry your jeans as usual. If the model is not shabby enough and you want a more vintage look, treat the desired areas with a cotton pad soaked in liquid bleach.

Then stick a piece of wood or cardboard into your pant leg and rub the fabric with sandpaper. The thinner the denim, the smaller the grain of the paper should be.

You can also decorate jeans. For example, you can sew lace onto one of the holes, attach appliqués to the free spaces, or cover the edges of the holes with rhinestones.

Jeans with holes and scuffs have been at the peak of popularity for many seasons now. Torn models are presented in the collections of famous designers, stars appear in such trousers, and “holey” trousers have filled the streets. Don't have them in your wardrobe yet? It's time to correct the situation! But don't rush to the store. Ripped boyfriends and skinnies aren't cheap: it's a trend for a reason. There is no point in overpaying if there are pants in your closet that you can “upgrade” with your own hands.

Ripped jeans are not a new trend. This is rather proof that fashion is cyclical. Pants with holes were first worn by hippies back in the 60s. With deliberately careless clothing, the “flower children” wanted to emphasize their protest against generally accepted rules. The trend was picked up by rock stars: in the 70s, every self-respecting rocker wore ripped jeans, thereby challenging society. Naturally, at that time, torn jeans were not sold: rebels simply wore their pants to holes and did not sew them up - that’s the whole “fashionable” secret.

Everything changed when modern designers began to look for inspiration in the informal styles of yesteryear. So, the catwalks, and then the streets, were filled with “holey” jeans.

Holes in the pants add a touch of playfulness, sexuality, and freedom to the image of the fair sex. Men's distressed jeans are associated with rebellion. The trend, which fashion critics predicted would be fleeting, has not lost ground for three seasons now, and it doesn’t seem to be going away anytime soon.

Choice of model, fabric and color

Do you want your wardrobe to be replenished with fashionable ripped jeans? Go... no, no, not to the store, but to audit your closet. There are probably denim pants out there that you don't wear because the model is outdated or seems too boring. Or maybe you have favorite jeans that are worn out, but it was a pity to throw them away? Finally, feeling sorry for old things has justified itself: give your trousers a new life.

You can tear any pants. But your task is to arrange everything in such a way that no one suspects “independent activities.” This is only possible if you choose the “right” basis. Which jeans are better to rip?

• Model. The flight of designer imagination knows no bounds: couturiers “tear” boyfriend jeans, mom jeans, and skinny jeans. For home experiments, it is better to choose pants that are not too wide and not too narrow: in the first case, the torn areas will simply get lost, in the second, the holes will look unaesthetic.
• Textile. For the experiment, pants made of classic denim are suitable - moderately thick. If you want to “upgrade” elastic jeggings with holes, then it’s better to abandon this idea. The result is unlikely to impress: if the base of the pants is made of elastane, you can make holes, but they will not look beautiful.
• Color. It’s better to tear up classic denim - blue or blue denim. The contrast of the threads provides a stunning effect: even old trousers will look stylish.

Have you thrown out all your old jeans and have nothing to experiment with in fashion? Stop by the nearest second-hand store and pick up some pants that you can use to make “candy.” Don't like used clothes? Then buy the simplest jeans in a regular store and turn them into trendy ones. The savings will be significant: usually torn models cost two or even three times more than those without holes.

4 ways to create a designer hole in your pants

Decide on the shape of the holes and their location. Of course, a lot depends on your imagination: don’t be afraid to show it. However, it’s worth looking for inspiration first so that you don’t end up with pants that you can only wear in the countryside, where no one can see. You can look for ideas on the Internet. After studying the star looks, you will understand what the ideal ripped jeans should be.

You can run into a couple of stores and try on the “holey” models that they sell there. A raid on boutiques will also give you an idea of ​​what your jeans should ultimately turn out to be. Don't forget that beauty lies in simplicity. Ideal - a couple of holes or one big one, a couple of worn areas. It’s ridiculous to have jeans with a hole in them or pants that reveal areas of the body that are usually hidden. In a word, don't overdo it.

Stylish holes with white threads

What you will need:

• a piece of plywood or thick cardboard;
• stationery knife or sharp blade;
• tweezers.

How to do

1. Mark future “holey” areas with chalk.
2. Lay the jeans out on a flat surface and place a piece of cardboard or a piece of plywood under the cut. This is protection against through holes.
3. Using a utility knife, make several horizontal cuts of the same size in the outlined area. They must be parallel to each other. The knife needs to be guided along the threads located transversely.
4. Using tweezers, pull out the blue threads. The white transverse ones should remain: they will beautifully cover the hole.
5. Carefully trim any white threads that are sticking out. You can cut off some of the white threads to make the gap larger.

Pumice will help hide traces of “creativity”: rub it along the edges of the cuts. To make holes look stylish, bleach the fabric around them. To do this, you can use bleach or any commercial bleach. Then wash your jeans as usual.

Sloppy holes in grunge style

What you will need:

• board or plywood;
• stationery knife.

How to do

1. Place a piece of plywood inside the pant leg. Make several parallel cuts with a utility knife. They should be located close to each other.
2. Carefully run a knife between the cuts, cleaning off the transverse threads and freeing the longitudinal ones.
3. Trim (or simply tear off) part of the longitudinal threads at one end to achieve the most careless effect. Grunge style jeans are ready!

Don't try to make the cuts beautiful if you want to end up with a grunge style. It’s not for nothing that this style is called a rebellion against glamor: deliberate negligence is very welcome. Jeans should look like they are torn from prolonged wear, but you don’t care about that.

Holes-fragments

What you will need:

• chalk or simple pencil;
• scissors;
• tweezers;
• comb;
• bleach.

How to do

1. Lay your jeans out on a flat surface. Mark with chalk or pencil the fragment that will be “empty.”
2. Carefully cut out the marked piece.
3. Walk along the edge of the fragment with tweezers, removing the threads. Fluff the edges with a comb.
4. Soak a cotton pad in bleach and blot the edges of the cut piece. Wash your jeans afterwards.

“Voids” should not be placed on the knees, behind or too close to the waist. If you decide to cut a rectangle on the leg, then it is better not to make any more conspicuous holes on it, otherwise the jeans will look vulgar. But abrasions are possible.

Torn knees

What you will need:

• chalk or pencil;
• stationery knife;
• grater.

How to do

1. Put on some jeans. Mark the knee line with chalk or pencil, which will become the cut.
2. Remove the jeans and carefully make a cut along the marked line.
3. Rub the slits. Wash your jeans and the cuts will become a little frayed, creating a “just torn” effect.

If black denim trousers are gathering dust in your closet, it’s time to take them out and turn them into trendy ones - cut them in the “knee” area. This has been all the rage for several seasons in a row. It’s not just women’s trousers that are being upgraded with neat holes at the knees: guys also like this trend.

Create a worn effect

Ripped jeans are an option for bold fashionistas and fashionistas. Even a calm image with holey pants carries a daring message. If you are not ready to “rebel”, but also do not want to lag behind fashion, try a less flashy (but no less stylish) version of the “upgrade” - wash your jeans. Scuffs are not as noticeable as holes, but this is how you can turn old or simply boring trousers into trendy ones. All you need is sandpaper or pumice, and a “backing” so as not to rub your pants through. Follow these four steps.

1. Get wet. You need to wet the areas where the abrasions will be located with water. This will enhance the effect.
2. Install the backing. Place a piece of plywood, a board or thick cardboard between the two parts of the trouser leg.
3. Rub with pumice or sandpaper. Until you get the desired result.
4. Wash your pants. And wear them for a couple of days in a row - the effect will intensify.

If the denim is too thick, then pumice will help “age” the jeans. Take the most common one. You will have to work longer with sandpaper, but the result cannot be distinguished from factory abrasions. It is better to use fine-grained sandpaper and not overdo it if holes in your pants are not part of your plans.

3 more trending ideas

Although torn and frayed jeans have been at the peak of popularity for several seasons, trends are changing. Do you want to keep up with the fashion world? Complement ripped pants with trendy elements.

• Make a fringe. A disheveled bottom coupled with holes in jeans is a new trend that has resonated with fashionistas. It’s easy to copy the trend at home: you need to rip off the hem of your trousers with a blade and pull out the transverse threads with a needle. This is how you can transform old denim shorts: nothing complicated, but it looks fresh.
• Decorate the holes with lace. Have you been dreaming of ripped jeans for a long time, but still don’t dare to bare your knees? Feel free to rip out your old pants! Large holes can be covered with lace - stylish and sexy. You can alternate “naked” holes and “lace” ones, make scuffs and fringes. The main thing is not to overdo it: everything will immediately look out of place.
• Wear fishnet tights under ripped jeans. This trend clearly shows how changeable everything is in the fashion world. Until recently, “fishing nets” on the legs were considered vulgar and a sign of bad taste, but as soon as models wore fishnet tights under torn jeans, everyone around them lost their heads from such a decision. Do you want to be known as a real fashionista? Punch big holes in your jeans, put on some mesh, and voila! The only condition: you don’t need to make a lot of holes, otherwise it will be difficult to get rid of the notes of vulgarity in the image. Make one or two big rips, pull the tights over your waist so they peek out from under your jeans - your stylish look is ready!

Transforming trousers is actually not difficult. It is much more difficult to correctly combine torn pants with clothes and shoes. It is believed that holey models can be worn with anything (with pumps and a jacket, with plain T-shirts and loafers, with a vest and white sneakers), but on some they look stylish, on others they look ridiculous. Show your imagination, be inspired by the looks of stars, pay attention to street fashionistas - and you will be able to harmoniously fit ripped jeans into your wardrobe.

Print

Today, denim clothes with frays and cuts are very popular among young people. But such a wardrobe attribute is very expensive. Therefore, not everyone can afford to purchase this.

But if you don’t have the financial ability to buy ripped denim pants, then don’t be upset, because you can make them yourself, although not everyone knows how to make ripped jeans at home.

It’s worth noting from the outset that it’s very easy to make fashionable denim pants with slits yourself. But first you need to decide on their style.

Pay attention! Ripped jeans should look beautiful and fashionable, but not vulgar. Therefore, you should not make cuts or holes in the buttocks or in the upper part of clothing. The incision should not highlight the intimate parts.

It is best to make incisions on the knees, shins, or above the knees. This way the clothes will look elegant, but clearly emphasize everyone’s favorite Western country style.

Table: techniques for making ripped denim items.

If a person does not like clothes with large holes or slits, then he should simply create the effect of a “worn out” item. It looks more natural, but not provocative.

Required materials

To create a unique thing with slots with your own hands, you will need the following tools and materials:

• Denim pants or shorts.
• Scissors designed for fabric or blade.
• Sandpaper.
• A bar of soap or a pen for drawing outlines.
• Tweezers.

Important! Many tools can be replaced. Instead of a blade, you can use a stationery knife, and a regular kitchen grater or disposable razor can perfectly replace sandpaper.

Step by step instructions

In order to make a unique, beautiful and glamorous wardrobe attribute from simple and ordinary things at home, you will need a little patience and the desire to create a masterpiece from an old item.

Initially, before cutting out holes yourself, you should try the thing on yourself. During fitting, it is worth marking the locations of future incisions. They will need to be outlined with a pen or soap.

It is worth considering that if the intended hole is located on the knee, then it should be cut a little higher than this part of the body due to the characteristics of the denim material.

If you cut exactly under the bend of the leg or at the knee, the cut may tear further.

After this, you should place the clothes on a flat surface with the front side out. You will need to place a hard object under the pant leg. This will help maintain the integrity of the back leg.

Instructions for step-by-step implementation in grunge style:

• Make horizontal cuts on the pant leg using a knife or scissors. They are made at a distance of 1–2 cm from each other.
• Slowly begin to pull out the vertical threads with tweezers.
• Lightly rub the sandpaper over the fabric.

When implementing a minimalist style, transverse cuts are made that do not involve the lobe threads. Minimalist cuts are made closer to the side seams.

If you want to make a solid hole in the leg, then you should cut it out with scissors, removing the transverse and longitudinal threads. But keep in mind that the hole on the inside of the fabric should be stitched, otherwise it will tear further.

Other options

Not only jeans with large holes are popular, but also those with light abrasions or a faded effect.

Pay attention! The linings under the holes look very nice. They can be made using various multi-colored fabrics, openwork material or denim of a similar color.

Table: techniques for performing various fabric processing options.

Fabric treatment option	Execution technique
Strong abrasion effect	This type of clothing is achieved by using a grater. Take your jeans, place them on a flat surface and cut them horizontally. The length of the incision depends on the desire of the person. But you shouldn’t make it more than 2–3 cm. Run a kitchen grater along the cut several times until the effect of the item being worn appears.
Weak abrasion effect	To give the item a slight worn effect, you should go over the fabric with sandpaper.
Fabric burnout effect	Chlorine is used to achieve the fabric burning effect. Burnout looks very impressive with small holes. After cutting and pulling out the threads, you should take a cotton pad and soak it in chlorine. Run the disc along the contour of the hole. Then the item will need to be washed.
Marking	The dotted effect looks very original. To create it you will need chlorine. The product is diluted with water and applied onto jeans using a pipette. After this, the pants are left for 1–2 hours. After this period of time, they need to be washed in powder. It is worth remembering that bleach quickly interacts with fabric. Therefore, in order to avoid the transfer of white spots to the back of the leg, it is worth placing a piece of gauze or cotton wool between them, which will absorb chlorine.

In order to properly sew the lining, you should turn the trouser leg inside out, cut out the patch of the required size and sew it on with large stitches.

To make the process of remaking things enjoyable for you and the result to meet your expectations, you should use the following tips:

• To give an item a worn-out look, wash it in a chlorine-free bleach.
• Do not make cuts near the seams of clothing. They will come apart quickly and your jeans will look overly ripped.
• If you don’t have eyebrow tweezers at home, you can replace them with a sewing needle. The sharp end is used to pry the thread into the notch and pull it out.
• Minor abrasions are made using a scissor blade. The blade should be applied with the back side and passed over the fabric, creating a corrugated effect.

Important! You should not make large holes initially. It should be taken into account that during wear they will become even larger.
The process of making denim shorts

If you have unwanted jeans, you can turn them into very attractive and fashionable shorts.

Step by step instructions:

• Lay your pants out on a flat surface.
• Mark the estimated length of future shorts with a pen or a piece of soap.
• Cut along the marked line. If you want to achieve a torn effect, then make a horizontal cut and tear off the fabric with your hands to the seam.
• If desired, markings, abrasions, and holes are made.
• Turn-ups are made in shorts: the lower base of the item is turned up once.

Useful video

Related Posts

Ripped jeans are a real hit of the season! Collections of famous brands are not complete without a couple of rebellious models, and stars flaunt through the streets in well-worn “boyfriends”. But why run to the store for new jeans when you can improve the pair you already have? Achieving a fashionable effect is not so difficult if you have sharp scissors, a stationery knife or a razor on hand. You will also need a grater, sandpaper or penza. With their help you can create stylish abrasions on your trousers. Let's find out how to give your worn out jeans a new life!

Don't rush to spend money - you can make fashionable ripped jeans yourself!

How to make holes in jeans?

So, you will need:

• sharp tool (knife, blade, stationery knife)
• wooden board or piece of thick cardboard
• chalk or bar of soap
• tweezers
• thread and needle or glue

Think about where and what size the hole will be, and mark it with chalk or soap. Place a board inside the trouser leg so as not to damage the other side of the trousers. Denim fabric consists of dark and light threads. In the selected location, make several cuts at intervals of a couple of millimeters to 1 centimeter. They should run parallel to the light threads. The cuts can be either neat or torn. It all depends on the design intent.

Using tweezers or another sharp object, pull out the outer dark threads from the fabric. First, take them out one at a time, and when you get your hand full, take them out in bunches. This will create a hole with white warp threads. To make large through holes, cut out the entire fabric and process the outline with the same knife, razor, sandpaper or pumice.

Step-by-step instructions for creating jeans with holes and scuffs

Helpful tip: You can sew the edges of the holes with stitches or fix them with glue on the back side. This way the holes will hold their shape longer.

By the way, tight-fitting skinny jeans with small slits at the knees are now in fashion. To get fashionable trousers, find matching trousers or jeggings (usually models made from thick dark or white fabric) and carefully make one or two narrow cuts.

Another fashion trend is boyfriend jeans. These are low-waisted trousers with wide straight legs and numerous abrasions. If you get your hands on these pants, don’t be shy and shred them to your heart’s content. The more worn out the boyfriend jeans look, the better.

How to whiten jeans?

Cuts and abrasions look more impressive if you lighten the fabric around them. To do this, prepare a solution of chlorine or bleach, soak a cotton pad in it and apply it to the incision site for a few minutes. Don't forget to wash your creation before wearing it.

Treat the cut areas with bleach on the outside and glue on the inside.

How to make scuffs on jeans?

Not all fashionistas like extreme holes. If you want to update your old trousers, but the rocker style is not your style, decorate your jeans with small distresses. To do this, you need a board or cardboard, as well as pumice, a grater or sandpaper. First mark the areas of the abrasions. Then insert the board into the pant leg and rub the jeans in the marked areas.

If you use a pumice stone or a grater, the abrasions will come out small and fringed. Sandpaper will create a very worn-out feel. In any case, do not rub the fabric too hard - otherwise, instead of scuffs, real holes will appear. We recommend working with slightly damp jeans. When a dry cloth rubs, a lot of dust is formed, which will then have to be wiped off from all surfaces in the room.

How to care for ripped jeans?

It is advisable to wash ripped jeans, especially those with many small cuts, by hand or in the delicate cycle of the washing machine. You can put them in a laundry bag or pillowcase. By washing torn jeans along with regular clothes, you risk ruining your creation.

Wash your jeans carefully so as not to destroy the result of your labors!

What to wear with ripped jeans?

Pants with holes will complement your street style outfit. A loose sweater, shirt or T-shirt is ideal for boyfriend jeans. The bravest ones wear a tight-fitting top with wide jeans. The result is a bright contrast between the brutal bottom and the graceful top. The ends of the legs are often rolled up to expose the ankles. In this form, “boyfriends” can be combined with almost any shoe: sneakers, heavy boots and even stiletto pumps.

Skinny jeans look impressive with baggy blouses or shirts, and with tight-fitting tops. Short t-shirts that reveal the belly are in fashion now. It is best to pair them with high-waisted, torn jeans.

Ripped jeans, which seemed to have gone out of fashion, are returning to the pedestal. This wardrobe item can increasingly be seen in the collections of famous couturiers. Of course, such jeans are more popular among young people. This choice is suitable for brave individuals who want to add a dose of eroticism and freedom to their image. Ripped jeans look very fashionable and extravagant. They can be found on the shelves of any clothing store. However, due to the growing demand, the price for them is rather high. But you can diversify your look with such trousers in a less expensive way. We will look at several options on how to make ripped jeans at home.

It should be noted that classic jeans trousers are suitable for this experiment. The density of the fabric should be medium. It is also worth paying attention to the cut - jeans that are too wide will lie loosely, and torn sections simply will not be visible. But on very narrow models the fabric will stretch, and the cuts will look unsightly. The best option is tight jeans. When choosing sizes and locations of incisions, consider your body type. And one more thing - such bold clothes require care for the skin of the legs and timely hair removal.

The grunge effect on jeans only creates an image of chaos and lightness. In fact, the cuts need to be made carefully. Before starting the procedure, you need to try on jeans and mark the places of tears with chalk or pencil. You can also mark the lines by hanging the jeans evenly. During the procedure, you should not neglect intermediate fittings - it is better to make a little modification than to spoil the item with holes that are too large. It is better to choose places for holes above or below the knee. It is not recommended to make cuts on the knees or on the folds; subsequently, the tissue in these places may tear even more. So, let’s create an ultra-fashionable wardrobe item ourselves.

Preparing to make ripped jeans

For this we need:

• sharp knife (stationery) or blade;
• scissors;
• a piece of plywood;
• needle;
• sandpaper.

When the desired break locations are identified, you can begin to work. To begin, place the plywood under the layer of fabric to be processed so as not to damage the back surface of the jeans.

Incisions must be made depending on the desired result. There are several options for creating a fashionable distressed jeans effect at home.

Casual version of jeans in grunge style

We make 6-7 cuts about half the length of the trouser leg. For a more casual look, the cut lines can vary in length. If you cut jeans with scissors, you get straight edges. To make the cuts look shabby, use a utility knife.

Unravel the cuts by taking out a couple of blue threads.

Then finish the edges of the legs. To do this, cut off the hemmed edge.

And for a ragged effect on the hem of the jeans, use sandpaper or a piece of pumice.

Then make several slits on the jeans pockets in the same way.

Do not forget to place a board under the fabric to be processed.

Ripped jeans in minimalist style

Make two parallel cuts 5-6 cm long. The distance between the cuts should be approximately 5 cm.

Denim fabric has a second layer of white threads, which will help us in this case achieve the desired result. Now take the tweezers and begin to carefully remove the blue vertical threads.

Remove all threads from the beginning to the end of the cut. As a result, you should only have white horizontal threads left.

Make several of these sections on both legs. You can also vary their size to suit your taste.

Distressed jeans

For a more shabby effect, the holes on the jeans can be of different sizes and arranged in a chaotic manner.

The edges of the cut are processed with sandpaper or using a regular vegetable grater.

You can also enhance the effect as follows. Using a needle, you need to pull out several threads, then break them unevenly.

This is a rather casual option that will suit young daring ladies.

The possibility of creating an individual image is not limited to the proposed options. All you have to do is show your imagination and design the slits on the jeans in the form of shapes, or place colored fabric under the holes. It all depends on your courage and desire to look original. It’s not difficult to make jeans with a torn effect at home, and the result will delight you with a new fashionable item in your wardrobe.