Learn how to wrap gifts in wrapping paper. Step-by-step instructions on how to beautifully pack a gift in kraft paper with your own hands

Love to give gifts? Then you have to pack them often. Of course, it's easier to buy a holiday package for the box and put it with the rest of the gifts. But most of all, gifts with original packaging that you can make yourself will be remembered.

How to gift wrap a standard size box

To pack a gift of a regular size, you do not need special skills. If you strictly follow the step-by-step instructions, you will wrap it quickly.

Prepare the following materials and tools:

• wrapping paper;
• Double-sided tape;
• scissors.

Package:

• Calculate the size of paper you need to use for packaging. This can be done using this formula. The width of a sheet of paper will be equal to the sum of the length and height of the box, which you multiply by 1.5. To determine the length, measure twice the width and height of the box, add them together, then add 4 cm to the total.

• Arrange the gift on the back of the paper according to the size. Glue a strip of adhesive tape on top of the cardboard along the entire length. Remove the protective layer from it.

• Fold the short edge of the paper onto the cardboard. Press the tape in place so that the package fits snugly against the cardboard. Press the fold lines with your fingers.

• Fold up the opposite edge of the paper by 2 cm. Glue the tape along the fold line, remove the tape.

Pull the package tightly around the present, fold the paper over the lid of the box and glue its edge, as shown in the photo.

• Now wrap the sides of the package. To do this, first fold the paper from above, iron all the folds formed. Stick tape on top.

• Alternately fix the corners of the paper on the cardboard.

• On the sides of the triangle that turned out, apply double-sided tape.

• Then press the triangle firmly against the box. Repeat all steps with the other side.

• Decorate the top with a bow and packing tape.

How to wrap a round box in gift paper

Round-shaped gifts are quite problematic to pack, but possible. With the next method of decorating the box, you use a minimum of paper and decor.

For round packaging you will need:

• patterned paper;
• hole punch, scissors, stapler;
• glue gun;
• cardboard circle;
• ribbon or twine.

Package:

• Measure the box height and diameter. In size, cut out a rectangle whose height will correspond to the height of the gift, multiplied by 1.5; and the length of the figure is the diameter. Cut the paper into strips no more than 3 cm wide.

• From one narrow edge of the strip, make one hole with a hole punch. Glue the other side of them onto the cardboard in a circle. You have a round fan of stripes. Wait for the glue to dry.

• Place the gift in the center of the figure. Cut the ribbon and thread it through the holes in the strips. To do this, gradually bend the strips to the middle of the circle, tightly tightening the tape.

• When you put the last strip through, tie a knot in the ribbon. So you collect all the blanks together, and they will not fall apart. Cut off the excess tape. Hide the knot with a bow, which is made from the remnants of the ribbon.

How to wrap a long box in gift paper

Narrow and long gifts can be wrapped like standard ones, but it is much more interesting to wrap them in the form of a large candy.

Packing materials:

• corrugated paper;
• scissors, transparent tape;
• decorative tape.

• Cut the colored paper into a long rectangle where its length is twice the length of the box. The height of the figure will be twice the sum of the width and height of the gift. Add 3 cm to it for allowances.

• Place the gift in the center of the parchment and wrap it around. Fix the paper cut on the cardboard with transparent tape.
• Pull the paper together with a piece of decorative tape on each side. If desired, make curls with the sharp edge of the scissors.

• Cut off the excess parchment along the edges of the package.

• Decorate the top of the gift with any decor.

How to gift wrap a custom size box

Sometimes presents have a non-standard shape. Their packaging is not as complicated as it seems at first glance. Take:

• two types of wrapping paper;
• scissors;
• glue gun;
• Double-sided tape;
• decor.

Package:

• Wrap a non-standard gift in thin parchment. You can do without this action, but this way you will smooth out the corners of the box. Cut off a small piece of wrapping paper depending on the size of the box. Place the box on one end. Tape on this side.

• Wrap the box around with paper. On one side, press the edges of the package and lightly iron the folds. Wrap the edge several times towards the center and fix with glue.

• Press down firmly on the packaging so that the adhesive is completely cured.

• Fold the other side of the package in the same way, but at a right angle to the other edge of the package. So you get a three-dimensional triangle.

• Decorate the packaging with any decor.

Giving gifts is an art. It is easy to learn if you follow such simple master classes. Now your presentations will always be original and will be remembered among many others.

See the video for three more ways to pack the box:

And, of course, I want to pack them more beautifully.

We offer you step-by-step instructions on how to wrap a gift beautifully.

Step 1

Unfold the roll of gift paper and lay it wrong side up on the table. Turn the box upside down and place it on gift paper. Trim the paper on one side. Make sure this piece of paper is large enough to wrap the box.

Step 2

Stand on the side of the box where the paper rolls. Gently stretch the paper from the opposite side over the box. Attach with a piece of double-sided tape.

Step 3

Unwind the roll and stretch it over the box, covering the already glued end of the paper so that the paper protrudes two centimeters beyond the edge of the box. Bend this two centimeter tolerance inward and glue it to the box along the fold with double-sided tape.

Step 4

Now let's deal with the open sides of the box. Fold the protruding ends of the paper inward, making four flaps bent at an angle of 45 degrees. Then bend along the flaps.

Step 5

Bend the top flap. Bend exactly along the top edge of the box so that the corners are even and the gift wrapping is beautiful. Then fold over again. This will be the line along which you need to cut off the excess. Cut off the excess part of the sash. Glue to the box.

Step 6

We do the same with the bottom sash. Bend, then fold again to perfectly align the sash with the top edge of the box. We glue the fold with double-sided tape, and the sash itself to the box with glue.

Step 7

Repeat steps 4-6 for the other side. Finish all sides by smoothing with your index finger and thumb along the edge to make sharp lines for the corners.

Step 8

Lay the packaged box upside down on the tape. The length of the tape should be approximately five times the length of the box. Stretch the ends of the tape and place the right one over the left one. Pull when they cross.

Step 9

Flip the box. You should have two ends of the tape that are approximately the same length. Slide each end of the ribbon under the strip of ribbon that is already stretched along the length of the box (see photo).

DIY gift wrapping: how to wrap a gift in paper

Gift wrapping has become a major challenge for many people year after year, and the main problem most of us face is how to wrap the box neatly and the first time without wasting the entire roll of paper and duct tape. I hope this step-by-step instruction will help you avoid standard mistakes:

1. Wrap the box with paper and mark the cut with a margin of 3-4 cm.

2. Fold the paper in the indicated place - this will allow you to cut exactly the sheet you need for packaging.

3. Cut a sheet of paper along the fold. You can press it down with a box if the paper curls.

4. Bend one long edge 1.5-2 cm.

5. Fix the other end with a small piece of adhesive tape 1-2 cm from the center of the box. Fix the folded edge on top also with one small piece, and preferably with double-sided tape. The joint should run in the center of the box. In the future, you can close it with a beautiful ribbon.

6. Fold the edges of the paper on the other side of the box to form a triangle.

7. Bend the bottom edge 1 cm.

8. Press the top edge firmly against the box and secure with a piece of tape.

9. Now press the bottom edge against the box and fix it carefully (it is also better to use double-sided tape here).

10. We do the same with the opposite side (this time it is better to put the box upright).

If your gift was sold without packaging, you can make a gift box with your own hands.

simple square gift box

Consider what size box you will need to pack your gift and make a blank from cardboard or thick paper according to the diagram.

It remains only to bend and glue the edges of the box.

Rectangular box with lid

For a rectangular box with a lid, you will need a large blank postcard or two sheets of cardboard or thick paper of the same size.

Draw each sheet as shown in the photo.

A ruler and any pointed object will help to evenly bend the cardboard along the lines.

Make cuts as shown in the photo.

Fold the walls of the future box.

Apply glue and fix the walls with paper clips until the glue dries completely.

Do the same with the second sheet.

Gift box with lid is ready!

Packaging is the calling card of your gift. How your present will visually look decides its future fate and impressions from it. In the modern world, there are many ways to create creative packaging with your own hands.

Original and creative packaging is able to attract attention and create the proper impression of a gift. In the modern world, there are many techniques and ways to create a festive mood with the help of wrapping packaging.

You can do the packaging yourself, you can buy it in a store, wrap a gift in paper or fabric. The main purpose of a gift is to give joy and create a proper mood.

Creative packaging is a way to surprise and delight a person

If you want to break away from the stereotype and not wrap your gift with standard paper and tape, you should look into other interesting ways. Increasingly popular:

• newspaper packaging
• packing of wide satin ribbons
• curly packaging
• craft
• glass jars
• tissue packaging

To decorate your gift, you can resort to bright accessories, lace, bows, flowers, beads, glass beads. Everyone is able to show their creativity and let their imagination fly.

Video: 5 ways to wrap a gift. How to pack a gift with your own hands?

How beautiful to pack a gift without a box?

The box is just one of a thousand ways to present a gift. Increasingly, people are trying to diversify the standard box and come up with original ways to decorate their surprises. All improvised means are used. The main thing is to absorb soul and love into your work, and then anyone will appreciate your work.

Candy gift wrapping

candy packaging is always intrigue and aesthetic pleasure

In order to pack a gift in such a "wrapper" you will need:

• corrugated or wrapping paper
• ribbons and canvas threads
• fittings
• glue, double sided tape
• scissors

Candy packaging can be cylindrical, square or round. It all depends on what exactly you will give the person. The most popular in the form of a candy bar.

cylindrical packaging or candy bar

This packaging is great for clothes, cosmetics, towels, bedding, accessories and much more. The main task is to form a gift into a roll and pack it tightly with cardboard. After that, start decorating:

1. Wrap the gift with wrapping or corrugated paper
2. At both ends, leave 15 centimeters of paper for ponytails
3. Fasten the seams of the paper with tape or glue (instant)
4. Attach the ends of the candy to the bows with ribbons.
5. Decorate the candy with congratulations, beads and other decorative elements

Gift packaging "Bag with a surprise"

For this package, you will need either corrugated paper, which easily takes any shape, or fabric.

gift bag packaging

You will need:

• bright fabric (organza or satin) or crepe paper
• satin ribbons
• thread with a needle
• decorations: rhinestones, beads, sequins, sequins

Choose any item for a gift. Lay out a piece of fabric (about a meter by a meter, but it all depends on the size of your gift). Place a gift in the center of the fabric and fold it on all sides.

Secure the knot with ribbon and form a bow. Fluff the tail that turned out at the top, decorate with stones and shiny elements. Attach a small greeting card to the ribbon that ties the gift.

Video: "Candy - surprise inside"

How to wrap a gift in corrugated paper?

Corrugated paper gives you the opportunity to unfold your imagination, as the variety of colors of the material and the ease of working with it are inviting. Corrugated paper is extremely light and its advantage is that it is able to keep its shape for a long time. The cost of this material is quite affordable for everyone and a whole roll can be purchased for only $ 0.50.

gift wrapped in corrugated paper

1. Unroll the roll of paper and put a gift in it
2. Fold the sides of the paper to wrap a gift
3. Secure the edges with tape
4. To hide the edges of the gluing, use corrugated paper flowers (video)
5. Decorate the flowers with ribbons, beads and stones as desired.

Video: "Roses (flowers) from corrugated paper"

How to wrap a gift in wrapping paper?

Wrapping paper has won the hearts of buyers with its colorful variety of patterns and affordability. It is easy to buy such paper in any needlework store and in the stationery departments.

The advantage of wrapping paper is that you can choose a pattern of any subject: for the New Year with Santa Claus, with a birthday cake or with Easter bunnies.

gift in wrapping paper

To pack a gift carefully, cut off a piece of paper that will completely wrap the item.

1. Put the gift in the center of the piece
2. Wrap it on both sides with paper
3. Tape the sides
4. Fold the ends of the paper inward to hide the exposed parts of the gift.
5. Fold the corners into an envelope and secure with tape

gift wrapping diagram

Video: How beautiful to pack a gift in paper with your own hands?

How to wrap a gift with a ribbon?

The package tied with a ribbon bow can decorate your gift and give a festive feeling. This method is very popular because it suits a gift of any shape and always looks elegant. To make such a decoration is not difficult. All you need is a ribbon, scissors and execution technology.

gift wrapped with ribbon

1. Prepare a gift wrapped in paper
2. Depending on the size of the gift, a certain length of ribbon will be needed, but always prepare with a margin. One meter is enough for a small box
3. Wrap the gift with a ribbon horizontally away from you, then cross it and return it to the front side again
4. Ribbon tightens well and ties into a bow

ribbon gift wrapping scheme

Video: “Decorate a gift with a ribbon bow”

How to wrap a gift with a cloth?

It’s not enough to prepare a gift, you also need to wrap it! The Japanese furoshiki technique (sometimes furoshiki) will help you pack a gift quickly and on a budget.

The fabric allows you to pack a gift of any size and any shape. With the help of this material, you can create bizarre shapes and surprise with colors. It is best to use for packaging:

• cotton
• mixed fabrics

gift wrapped in cloth

At its core, furoshiki can be compared to origami. Don't be discouraged if you end up with a not-so-tidy job right away. Over time, you will master this technique and be able to easily create packages.

gift wrapping technology

1. Furoshiki is first folded diagonally so that the face is inward.
2. Tie the ends in a knot
3. Next, turn the furoshiki inside out.
4. All corners fold into one big

Video: “We decorate gifts with furoshiki technology”

How to wrap a gift in an unusual and creative way?

A beautiful handmade box will be made by hand, decorated with lace and tied with a braid. To do this, you need to prepare a cardboard blank, strictly observing the dimensions.

box blank

1. Cut out the piece of cardboard
2. Glue the edges of the workpiece with a hot gun or strong quick-drying glue
3. Glue on the tape
4. Decorate the box

packaging decoration

Try to surprise your loved ones with a box of a non-standard shape, for example, a pyramid. Jewelry, sweets, key chains and any other trifle can fit perfectly in this package.

pyramid packaging

It is not at all difficult to make it using the proposed scheme.

1. Draw a pattern on paper
2. Cut out the pattern
3. Glue the edges of the box where indicated
4. Attach the ribbon and tie it into a bow

pyramid packaging scheme

Video: “We make creative gift wrapping with our own hands”

How to pack a gift in the form of a shirt?

Packing-shirt is a modern way to congratulate your beloved man on any occasion. Such packaging is done by hand, and the design and style can always be chosen to your liking.

shirt packaging

For manufacturing you will need:

• wrapping paper or kraft paper
• ribbons
• buttons
• scissors
• ruler

1. The sheet of paper is placed face down on the table.
2. Both edges are folded in
3. Flip the workpiece to face you
4. We bend the edge of the paper that was not yet bent
5. We bend the corners from the center of the workpiece
6. On the other hand, we also bend the edges
7. Fold the shirt, decorate

shirt packaging scheme

Video: "Gift packaging-shirt for a boy and a man with his own hands"

How to pack a sweet gift?

In order to pack sweets, packaging in the form of a cake is perfect.

cake - packaging for sweets and other small things

Such packaging is very interesting in that it has a visual similarity with such a dessert as a cake. It consists of 12 pieces that can be filled with the most unexpected sweets, chocolates and lollipops.

You can decorate each piece in a variety of ways. When creating this package, you can “bake” a chocolate, creamy and even fruit cake, and you can decorate it with coffee beans, ribbons, lace and beads.

Important: Such a cake will be an excellent present for a birthday, professional holiday, March 8, Valentine's Day and just like that. Modern stores sell a variety of sweets that fit comfortably in every bite: M&Ms, chocolates, marshmallows, jellies, glazed peanuts and more.

1. In order to create a cake, it is best to print the template on a printer. Then all 12 pieces will be the same size and shape and you will not waste time drawing
2. Glue all edges on the specified pattern
3. Decorate each piece as you wish.
4. Collect all the pieces on a dish and, if desired, tie with a ribbon so that they do not crumble.

template for pieces of cake-packing

Video: "Master class box in the form of a piece of cake"

When preparing for any event, you need to take care of the gift in advance. Let yourself surprise your loved ones with a pleasant surprise and please them with non-standard packaging of your gift. There will be a lot of impressions from the creative approach, and even more pleasure.

Important: If you put your soul into the packaging, this will become a noticeable advantage of your gift and everyone who receives it will definitely like it.

Video: "Original gift wrapping in 5 minutes"

A universal selection of gift ideas for every occasion and occasion. Surprise your friends and loved ones! ;)

How to wrap a gift in gift paper: step by step instructions

It is not difficult to make packaging with your own hands, even without a box, which has already become a traditional symbol of almost any holiday.

There are several options here:

1 Just wrap the present with wrapping paper. The master class below describes this process in sufficient detail. I often use it myself, it works great)

For this method, you will need to cut out a piece of paper that is wide and tall enough to wrap the gift. Usually for this it is enough to multiply the width and height of the surprise by 2, add the side parts if the present is not flat and leave a small margin for hem. Then you need to wrap the gift according to the instructions below.

It is best to pack in this way:

• book,
• neatly folded T-shirt
• towel,
• picture,
• telephone.

Due to the fact that you yourself set the shape with the help of wrapping paper, even a soft rag surprise can be decorated in this way.

2 Origami. It turns out very original and at the same time you can even do without a box. All you need is a sheet of paper and a little patience (well, a ruler with scissors will also come in handy).

Such a light paper box is good to make from the so-called kraft paper, which has an interesting property to give any creation something stylish. Try to apply it too. You can’t put a big gift in such a box, but a small souvenir will look very cool here.

3 There is another object that is not at all easy to approach - a round or oval shape. In fact, everything here is easy to do yourself - take a square of the wrapper, put the box in the center and ... collect the excess in a bundle.

We use corrugated paper

What is the advantage of corrugated paper? It is in her corrugation. Such a wrapper can be expanded where necessary, and given the desired shape. And for some of the methods described above, such paper is also suitable.

It would be ideal to wrap it in:

• bottle,
• watch,
• plate,
• handle,
• mug.

Thanks to the structure of the paper, it will be very easy to wrap a bottle. You will need the top and bottom piece, which you need to wrap first the top of the bottle, and then the bottom. To make it all look harmonious, tie the bottle with a thin ribbon and mask the junction with decorative ornaments.

For round gifts, everything is quite simple - you just need to cut off a piece of paper that covers the side of the surprise around the perimeter. The lower and upper parts will need to be assembled and decorated at the junction.

Another simple method that works for just about any small to medium sized gift is candy wrapping. With such a task, you can really do it yourself in a few minutes.

Presenting a present in a box

Boxes come in different shapes. Rectangular, oval, triangular - this is just the tip of the packaging iceberg, the variety of shapes is much greater.

Let's start with the traditional shape, which is not at all difficult to create from thick cardboard.

If you are preparing for an important holiday, then the gift box should be decorated. This can be done, for example, as described below. A great way to congratulate a man by wrapping, say, a shirt in such a box.

To make your gift memorable for a long time, I suggest using the previously mentioned discs. But this time you need not a wrapper from them, but they themselves. Circle the disk as shown in the photo, then cut and fold the edges.

For a larger box, you can use plates, pans and much more.

And here is the presentation packaging in video format:

That's all! We have come to the end of the article on how to wrap a gift. I think you have found something suitable for you. Or maybe I didn't say something? Then write about it in the comments.

See you!

P.S. Be sure to subscribe and wait for news from the nyaskory blog. And also tell your friends through social networks and surprise them with magical gifts.

Sincerely, Anastasia Skoreva