We knit an openwork bactus crochet. Crochet shawl and bactus - for a real lady

Baktus is a triangular scarf, smaller than a shawl, but larger than a modest bandana. The fashionable accessory perfectly protects the neck, collar area and chest. This type of scarf knits very easily and quickly. Detailed photo and video tutorials will help beginner needlewomen master simple crochet techniques and knit a beautiful accessory.


Crocheted openwork bactus is suitable for all times and seasons, both for adults and children. If necessary, small and large fashionistas can tie a scarf on their heads to protect their hair from the wind, and ears and cheeks from the cold.

We knit a female bactus with a wavy openwork pattern

Step-by-step photo master class with examples of schemes

A beautiful scarf with a wavy pattern is suitable for stylish girls and women.



The bactus scheme is simple. The number of rapports is odd, for example, 17-15-13-11, and they decrease evenly from both ends from the base to the top.

There are 19 sts in one rapport. If we take the calculation for 15 rapports, then we dial 15 * 19 = 285 + 38 on bactus tails + 1 for symmetry, in total 324 sts. Hook for work No. 3, threads are smooth without villi, so as not to hide the beauty of the pattern , consumption - 150-200 g.

Advice for beginners! When crocheting a large number of air loops, needlewomen use marks every 20-30 points - convenient plastic markers.

The first 2-4 rows are the longest and most difficult. It is necessary to correctly distribute the rapports and not lose count.

A chain of air loops is a zero row.

The first row begins with 2 air stitches and 19 double crochets in each loop of the chain, then we knit strictly according to the instructions.

From the other end of knitting, we focus on the continuation of the pattern.

To the attention of beginner needlewomen! The embossed column and half-column are not knitted into the base loop, but cling to the “leg” of the column from the previous row. Thanks to this technique, beautiful convex paths are formed.

5-6 rows reduce knitting from two ends and scarf tails are formed.

7-8 row smoothly reduces the bactus by 2 motives on both sides.

9-10 rows are already easier to knit, the pattern itself tells you where the relief columns lie.

11-12 row forms the outlines of a triangular scarf.

13-16 row - the central part of the canvas, which is repeated to the top of the product.

At the end, a beautiful rounded edge top of the bactus is knitted.

In conclusion, around the entire perimeter of the scarf, it is necessary to knit one row with half-columns. It is advisable to stretch the finished product, slightly stretch and dry on a terry towel.

Video tutorial on crochet bactus with a wavy pattern

Crochet baby bactus

An excellent demi-season solution would be to knit an openwork bactus, which can be supplemented with a hat or mittens. Crocheting does not take much time, so it will take a couple of hours to work and the baby will be protected from winds and bad weather.

For work you will need:

  • a skein of ALIZE Cotton Gold Batik;
  • hook No. 3.5 mm.

The size of the finished product depends entirely on the girth of the child's neck (we have 74 cm in the photo, without ties). Yarn, it took about 200 gr., This is 1 skein.

The scheme for knitting an openwork children's bactus:

Yarn can be changed and combined. The finished result will please you and bring pleasure to the baby.



Video on knitting a beautiful warm angora bactus

Popular patterns and motifs for beginners for crochet bactus

The more the product is in demand, the more needlewomen want to make it more elegant and unique.

Simple mesh pattern for a neckerchief

An easy master class on crocheting a bactus is sure to please beginner needlewomen.

For work you will need:


The work uses the simplest method. One air loop serves as the basis for three double crochets. It turns out such small fans, arranged in a checkerboard pattern.

Knitting starts from the center of the product.

6 air stitches are collected, and then a double crochet is knitted into the first stitch of the base. Then we knit strictly according to the scheme, alternating plain and colored threads.

With this pattern, it is easy to adjust the size of the bactus. The drawing sinks into memory and is knitted on the machine, and the openwork fabric is quickly added.

Optionally, you can make a fashionable finish with tassels. We knit a chain of 10 air stitches from the tip of the bactus, attach a brush to the working thread and knit another 10 stitches. Thus, we process the entire edge of the openwork scarf.

The finished result will exceed all expectations! A bright model will decorate the image and warm the neck on cool spring-summer evenings.

It is worth picking up a hook and thread, studying an easy pattern and a little work. A new stylish little thing will surely please a son or husband, a teenage girl or a little 5-year-old fashionista.

Bosnian bactus

For knitting fashionable triangular scarves, a variety of original patterns are used.


For work, it is desirable to use smooth dense threads that emphasize the relief of the pattern. Bosnian baktus have 4 main performance principles:

  1. Work starts from the corner with 3 air stitches. 2 double crochets are knitted into the initial loop. Thus, the corner of the product is formed.
  2. Each odd row ends with the tail of their air loops.
  3. Each even row is knitted with connecting or, as they are also called, blind columns.
  4. In the front and back rows, the grips are made only for one wall of the base loop. More often it is the back wall of the loop.

Thanks to the dense multi-colored threads, the bactus turns out to be bright and exotic, and the simple pattern stands out with beautiful relief lines.

Mesh pattern for a fashionable headscarf

Other popular patterns for bactus are Solomon's loops, scales or crocodiles, hearts and shells, spiders and pineapples. For beginner needlewomen, a simple and light mesh motif is suitable for the first work.



An openwork scarf made of bright woolen yarn will warm your shoulders in cold weather and will be an elegant addition to a strict gray dress.

Fillet motif for shawl bactus

In the extraordinary, empty and filling with loops of space are created. Due to this technique, mesh areas are replaced by a variety of geometric, curly or floral elements.


The model is truly original, knitting starts from one corner, and the fabric is made up of beautiful openwork rhombuses. It is recommended to decorate the tails of the scarf with large fluffy tassels.

Bright yellow bactus will look spectacular at any time of the year. It will decorate a dark coat in winter, a denim jacket in spring and cover bare shoulders in hot summer weather.

Pineapple pattern for lovers of knitted exotic

In an openwork bactus, the gray color of the finish goes well with the caramel pink canvas.


Knitting of this unusual model starts from the central corner and slowly expands in both directions due to the addition of new motifs. Beautiful fantasy patterns of pineapples add up to a single whole and stand out against a dark background.

Grapes on an openwork scarf

Exquisite motifs of southern fruits or flowers are liked by all needlewomen without exception.


A scarf with grape tassels is knitted from golden silk threads. Work begins with a ring of several air loops. The pattern uses single crochet stitches, and the grapes are made up of beautiful fluffy stitches.

Information for beginners! Lush columns are formed by 3-4 double crochets, which are made from one loop of the base and connected with one connecting loop.

Leaves in openwork patterns of bactus

Knitted scarves of light green, yellow, green and emerald colors are perfect for gray autumn days. Leaf motifs beautifully add up to a single landscape and adorn an exquisite female image.



Bactus knitting starts from the center and is made from leaves according to the original pattern. The tails of the headscarf are decorated with long cords with wooden beads and tassels at the ends.

Japanese crochet bactus

Many successful models came to needlewomen from the land of the rising sun. A beautiful black shawl made of floral motifs will decorate any look from strictly formal to gentle and romantic.


A simple finishing with chains of air loops will add extra chic to a black openwork model.

Bactus from grandmother's squares

To knit a fashionable scarf from grandmother's squares, you will have to be patient. Depending on the size, 20-30-40 separate squares and 10-12 triangles are made to form the correct figure.


All motifs are combined into a single canvas and are processed along the edge with a finishing pattern. The work is painstaking, but bringing great pleasure to the needlewoman with the end result.

How to knit a shawl - baktus from a grandmother's square

Bactus "Fairy Tale" from snowflakes-butterflies

In the next video tutorial, the craftswomen will be able to get acquainted with the pattern "Snowflake Butterflies", which, as they knit, fold into a magnificent fabulous scarf.

Each novice needlewoman can choose a pattern to her liking on this page, and, through careful painstaking work, create a real knitted masterpiece.

Pattern "Kerchief" crochet for bactus

From fashionable melange yarn or sectional dyeing threads, you can easily knit a stylish and bright bactus. The openwork pattern "Kerchief" is great for making mini-shawls and triangular bactus scarves.


Knitting starts from the center of the future model, and the rows are performed in a circle. Thanks to this non-standard technique, it is easy to adjust the width and length of the future bactus.

Mini shawl with heart pattern

For the attention of needlewomen, a short video lesson that will teach you how to knit bactus from cute green hearts in 7 minutes.

Crocheted scales for bactus

A knitted motif resembling crocodile skin is also called scales.



Bactus, made in such a pattern, looks rich and very attractive. A magnificent scarf in original colors can be thrown over the shoulders and go to a social event or a corporate party.

A selection of patterns with symbols for knitting bactus
















Beautiful binding of the bactus edge

It is desirable to process the finished product around the entire perimeter with a beautiful final strapping. The simplest options are half-columns, pico or bows from air loops. But there are more interesting varieties of edging with fantasy and a special twist.

Edge trim with centipede motif

How to process a knitted product around the perimeter so that it acquires a beautiful finished look will show a short video tutorial with a visual step-by-step master class.

Finishing "Crab step"

A simple and easy way to process the edge of the product is tying with a crustacean step. Every novice craftswoman should learn this interesting technique in the art of home needlework.



Jagged edge of bactus

A simple, but very pretty finish is obtained from small and large cloves.



This tying is done quickly and easily:

  1. 2 double crochets are knitted into the base loop;
  2. then 3 air loops;
  3. and again 2 double crochets.

This will be our report. It turns out a modest, but very pretty openwork clove.

Openwork edge trim

Bactus, connected with a dense pattern, can be complemented with a light openwork finish.

The harness consists of two rows, which are performed only on two sides of the triangle and end with long cords with tassels.

Knobs on legs from air loops

It is impossible to pass by such beauty! Long chains with bumps at the end are easy to make and look stylish and beautiful.

According to the scheme, long chains of air loops are knitted from the base, cones of 5-7-10 double crochets are formed at the ends, which are connected by one loop. Then, with the help of the same air chain, the work returns to the base.

The result is an original fringe with a cheerful and mischievous mood!

The finished triangular scarf must be washed with a drop of shampoo and dried on a flat surface, then the knitted product will acquire a finished, regular shape. Washing and drying with stretching has an ironing effect on the bactus, and it becomes perfectly even, like from a hot iron.

Re-wash after wearing can be done in the machine on gentle mode or washed by hand and thrown to dry over a rope or back of a chair.

How to wear a beautiful knitted bactus will show a selection of photographs of people of different sex and age. Thin triangular kerchiefs can still be tied around the waist and hips, creating a new unique style in an ensemble with jeans and tight-fitting tops.

On cold frosty days, you can not do without warm knitted scarves. And with the onset of spring and summer, woolen accessories are replaced by fashionable openwork scarves. I would like to wear unusual stylish gizmos at any time of the year in order to stand out among the surrounding colleagues, friends and girlfriends.

(scarf), having a triangular shape. It is put on in a special way (corner forward) and serves not only as an excellent protection from the cold and piercing wind, but also acts as a stylish wardrobe item.

General information about - triangular scarf

The classic bactus "came" to us from Norway and became very popular, especially among young people. This triangular scarf looks very elegant and unusual, it adds a special charm and charm to any set of outerwear. It fits perfectly into different stylistic directions, including casual, country and kitsch. Bactus goes well with a sporty style. If you want to have such a stylish piece of clothing in your wardrobe, this article is for you. In it, we will tell you how to knit it yourself. Previously, this triangular scarf-kerchief was made only on knitting needles and decorated the finished product with flowers, and now bactus is increasingly crocheted, since this tool allows you to quickly make a product and at the same time does not limit the flight of the author's imagination. As a rule, bactus is made in a single-color version and is decorated with tassels, pompoms, fringe or textured knitting.

We begin to knit a triangular scarf-kerchief. We select tools and consumables

Crocheting bactus is not difficult, the main thing is to choose the right yarn, hook, and also be able to "read" the work pattern.

Usually, the length of such a triangular scarf-kerchief varies between 50-130 cm, and the width of the widest part can be 20-40 cm. Bactus can be large or small, it all depends on what and how it will be combined. You can make the product in any size that suits you. On average, about 200 g of yarn is required to make one bactus. As a rule, baktus are made of cotton, wool and acrylic. We advise you to choose soft, pleasant to the touch yarn. We will use Alize knitting threads (a mixture of acrylic and wool - 50% / 50%), with a density of 100 g / 240 m. The color of the yarn is pale peach. In addition to knitting threads, you will need a hook of a suitable size for work.

We carry out a warm crochet bactus: diagrams and description

We will knit the product according to the following fairly simple pattern.

The size of the scarf will be as follows: 166 x 37 cm. Let's start crocheting bactus by making a magic ring. Next, we will make three air loops (VP) necessary for lifting. Then we will perform two columns with one crochet (CH). Let's turn knitting. In the second row, we will perform three lifting loops and 1 CH in the same loop of the base. Then we will make two more columns with a crochet. In the third row (turning the knitting) we will knit three VP and 4 CH, and we will perform the last two in one loop. The fourth row will start with 3 air loops. We will knit 1 CH in the same loop of the base. And then do 4 more CHs. We will start the fifth row with 3 VP and will knit further according to the following pattern: "1 VP - 1 CH", alternating these elements. The next three rows (from the sixth to the ninth) will be performed, like the first four, using single crochet stitches and making the necessary increases in each row. We will make the tenth row openwork, using the pattern of alternating air loops and double crochets. When your product reaches the desired width, start making gradual reductions, thus forming a "triangle".

Beautiful crochet bactus: strapping patterns

When your scarf is ready, you can start decorating the edge. You can tie a baktus either with a thread of a contrasting color, or use the yarn from which the warp was knitted. We will decorate the edges of the triangular scarf with single crochets and air loops. In the diagram, the strapping is marked in green. First, we perform 2 single crochets, and then three VPs. Next, we knit another 9 tbsp. b / n and again perform an element of three air loops. By analogy, we tie the entire product to the end. Here we have such a beautiful, warm and soft crochet bactus.

You see, the manufacture of such a wardrobe detail does not cause any particular difficulties. We hope everything works out for you. Good luck!

Another simple technology for making an openwork triangular scarf

Another simple knitting method is the manufacture of bactus from square and triangular motifs. If you know how to perform the simplest "grandmother's" square, making an elegant and openwork scarf-kerchief will not be difficult for you. In order to knit spring bactus, you will need 200 g of yarn (50% wool, 50% acrylic) and hook number 3. Choose the color of the knitting threads yourself. It is advisable to use a delicate plain yarn. The dimensions of the product will be as follows: length - 100 cm, width - 47 cm. How to crochet an openwork bactus? First, choose any square motif that you like. We suggest that you complete the product using such a simple scheme of the "grandmother's" square.

How to knit an openwork scarf-kerchief from separate motifs?

Crochet bactus, start by making 21 squares. Then do seven more halves of the "square". We will need them to create a solid canvas of a triangular shape. Then arrange the elements as shown in the following diagram.

Tie all the elements into a single canvas. To fasten squares and triangles, you can use single crochets by knitting them in the middle of the corner arches from air loops. Also, to connect the motifs, you can perform an additional row with a mesh or zigzag. As a result, you will get a triangular scarf-kerchief. It remains only to make the binding of the product. Make it with single crochets. Make ties at the ends of the baktus from the VP chains. If desired, decorate your scarf with fringes, knitted flowers or any interesting accessories.

An excellent option for home needlework is crocheting bactus. It is suitable for both gift and personal use. A detailed diagram and description will help beginner needlewomen make it on their own.

Simple bactus: a master class for beginners

Crochet bactus according to the simplest pattern and description is suitable for beginner needlewomen. Knitted in about 6-7 hours. From the materials you need to purchase yarn, and from the tools - hook No. 3.

Knitting starts from the 1st century. n. The work is done with a fantasy pattern with additions on both sides 13 times based on a motive in 4 rows. When the height of the work reaches approximately 50 cm (or 27 motifs), knitting ends.

It remains the binding, which is performed from 3 tbsp. without nak. in an arc in n. of the last line, after the 5th c. n. make a loop without nak. in the last st. without nak. Thus, repeat to the end, making the strapping on three sides.

Crochet bactus (the diagram and description for beginners are very simple) is suitable for stuffing your hands and learning to knit. Such a thing is difficult to spoil, and the materials will be inexpensive.

Crocheting the edge of the bactus

An important role in the creation of any knitted product is played by the final finishing of the edge. Thanks to a wide variety of strappings, you can decorate even the simplest bactus. Moreover, all options are available to beginners.

Some options:

  1. Rachy step. It is the most common type of binding. You will need to tie a straight row in a circle st. without nak. Then the crab step is knitted: you need to insert the hook into the second loop, pull the thread out of it, knit the crochet and close the loop. The rapport continues to the end, the thread is fixed and cut off.
  2. Pico. Weaves often in the form of a circle. The first row is cut off at the end, and knitting continues from the first loop in the first row. The second row consists of three columns without nak., One picot. The pattern repeat is repeated to the end. The binding ends with Art. without nak., the thread is fixed and cut off.



  3. Cones. It is carried out by tying in a circle. The first row is straight or round in columns without nak. Another circle is made up of two c. p., the loop of the last row is skipped, then a half-column is knitted with nak., it is captured in the next loop twice. Five received loops are knitted, repeat in this way to the end. The thread is fixed and cut off.
  4. Arch. Also performed in a circle. The first row is knitted st. without nak. The new one starts with without nak. in the loop of the previous row. After knitting three in. n., two unfinished art. with nak. along with three loops that are on the hook. 3 hinges of the base do not need to be touched. Everything repeats and ends with a half-column without nak. in the first initial loop. As a result, the thread is fixed and cut off.

There are other methods, but these are the most popular.

Patterns for bactus

Crochet bactus, (a diagram and a description for beginners are presented in the article), is an excellent option for stuffing the hands of needlewomen. It can be knitted not only with simple columns, but also with beautiful patterns.

These include:

  • solomon loops;
  • pineapple pattern;
  • tiramisu;
  • shells;
  • twisted posts;
  • curls and others.

The simple shape of bactus allows you to decorate it with any kind of patterns. Before you start knitting with a certain pattern, you need to determine for what purpose the accessory will be used. If the item is used as an everyday addition, then a neat openwork pattern will suffice. If the bactus will be used in late autumn and winter, then it is better to use a tight knit.

Openwork bactus with a relief pattern

Crocheted bactus looks more attractive with an openwork pattern. The diagram and description are simple and understandable even for beginners.

To knit such a product, you will need spinning threads, hook No. 3 and any scissors:

  1. Initially, a chain of six is ​​recruited. etc., and the circuit itself closes in a ring. Three sts are knitted. with nak. so that the first art. there will be three in. n. Weaving 1 c. , these steps are repeated three times. V. p. is not done at the end, but a column with 2 nak is knitted.
  2. The work unfolds, after which they knit three in. p., and under c. n. of the previous row, three columns are knitted with nak. Here they knit in. n. and three columns with nak are knitted here. and again in P.
  3. Knitting is repeated until the end of the row, and at the end it is knitted in. p, weaving art. with 2 acc. under a chain of three c. n. bottom row.
  4. Now you need to tie three in. p., and under c. p. of the last line, knit 3 tbsp. with nak., c. p., 3 tbsp. with nak. Art. with nak., 4 c. n. Under c. n. of the last row are woven 3 tbsp. with nak., c. p., three tbsp. with nak. After in. n, and under c. n. the bottom line is knitted 3 tbsp. with nak., c. p., 3 tbsp. with nak.
  5. Art is knitted under the arch. with nak., 4 c. p., Art. with nak., c. n. and under in. n. the bottom row is knitted three tbsp. with nak., c. p, three st. with nak. Again in. n. and like the first row connecting st. with double nak.
  6. The work unfolds again, and each row will begin with three in. n., and end with st. with double nak. The first part, center and end must be the same. They are from 3 tbsp. with nak., c. n. and 3 tbsp. with nak.
  7. The first element is knitted, and after c. n., after under the arch of four c. n. nine tbsp. with nak.
  8. Weaves into. n., the central element is knitted from three tbsp. with nak., c. n. and three tbsp. with nak. On the second side, knitting is repeated.
  9. The series ends with with double nak. Knitting unfolds, and the next row is knitted. Knit three in. n. and the first element. After - in p, st. with nak. woven into the first article. with nak. from nine st. bottom row. Weaves into. n. and fit st. with nak. to the next column. The same is done with all nine st. with nak.
  10. Weaves into. n. and the central element is woven.
  11. On the second side, the same thing, after which the row ends and the next one begins. The first element is woven and proceed to nine st. with nak.
  12. Art. with nak., three in. p., also Art. with nak. skipping 1 column. Then the whole element is knitted to make five tbsp. with nak.
  13. Knitted in. n. and the central element. And after that, the second side is made.
  14. Now you need to prepare the arches for the next nine art. with nak.
  15. The first element is woven, Art. with nak., four c. p. and art. with nak.
  16. Art. with nak., three in. p., and after Art. with a crochet in the upcoming arch. In the next arch, three sts are knitted twice. p. and art. with nak.
  17. Weaves into. n., Art. with nak., 4 c. p. and art. with nak. The same is repeated on the second side.
  18. The series ends, and proceed to the next. The first element is knitted in it and nine st. with nak.
  19. It is necessary to link Art. with nak., three in. are woven into the arc. n. After three c. n., knit Art. with nak. into the next arc. The rapport is repeated on the second side. Weaves into. n. and an element of nine tbsp is knitted. with nak. Then it is knitted again. n. and the central element. The same on the second side.
  20. A row ends and a new one begins. The first element is knitted, and in those nine subordinate art. with nak. knitted one at a time. with nak. and one c. n. between them.
  21. Art. with nak., fit three in. n. and fit st. with nak. into the next arc.
  22. Again, nine. with nak., and between them one c. n. Weaves in. n. and the central element. The second side is knitted.
  23. Before the first and after the last and central elements are constantly knitted in. n. After knitting is repeated to the optimal size.
  24. The work is completed by decorating the scarf to the taste of the needlewoman. The threads are cut and neatly hidden.

Bactus from motifs (grandmother's square)

Yarn and hook No. 3 are required for work.

The scheme for a bactus crochet on a grandmother's motive. Description provided below

Six vp are recruited, which close in a circle. The subsequent line begins with five lifting loops, three tbsp. with nak. The third line is woven from five lifting loops, three tbsp. with nak., knitted in two ch. the last line, and after two ch. After three art. with nak. in the next two centuries. n. of the last row, knit again two c. n. After - the same thing. Then knit three tbsp. with nak. in two in. n. second row, two c. p. and art. with nak.

The fourth row is knitted in the same way as the third.

Tying is done in lush columns. A magnificent column is tied into the first loop, c. p., and in the third loop st. without nak., there is also a magnificent column, c. n. This is repeated until the end of the edge. Bactus is made up of motifs to the required size.

Crochet bactus with a wavy edge

Bactus with a wavy edge is knitted from a wide edge to a narrow one, as a result, something like a triangle is obtained. The number of reports must be odd in total. It is necessary to tie a long chain from to. n. You need to dial 19 rapports and a certain number c. n., for example, 405.

For the first row, two in. lifting point, 18 half-st. with nak. into all loops of the base, and then knitted with rapports. When the required number of rapports and 1 half-column with nak is ready, it will be necessary to complete the row of 19 st. with nak. in all loops of the base.

For the pattern, you need to tie the chain in. n. from Art. single crochets, embossed columns and semi-columns, also columns with 1 crochet. and 2 nak. When knitting, the inner side remains flat, and the outer side is embossed. The finished work is tied with semi-columns.

warm bactus

For winter, a warm bactus is perfect, which will look like a shawl. To work, you need a hook and yarn. The square is finished.
100 such squares are made. They gather and unite. Then 10 strips and 10 squares are knitted and 10 strips are connected.

Crochet mohair

Any type of warm bactus can be knitted from mohair. The difference between mohair and ordinary threads is exclusively in softness and quality. The pattern should be simple but attractive. Crochet such an accessory. A row is woven from 4 c. p., 2 tbsp. with nak. in 1 loop, 3 ch

The next line consists of connecting posts, and in the 2nd c. n. SS behind the back wall of the loop. And so the whole series is woven. Such knitting continues with the alternation of Art. with nak. and row SS - 2 times. Then - a sirloin wall of 1 tbsp. with nak., 1 c. n., after - 1 row of connecting st.

An extreme loop is woven in each line. After the matter reaches the middle (60-70 cm), it is required to weave without additions 1 row of st. with nak., SS, a number of art. with nak. The rows are not knitted to the end, but as if with decreases. 3 in. are woven along the edges. item with fringe. The parts must be the same. After 140 cm, the work is completed. The edge is tied next to Art. without nak., the line of the crayfish step.

From fine yarn crochet

Knitting begins with four in. n. from 2 tbsp. in the first of them. An additional three loops are knitted. Connecting Art. the next line is knitted. Lines alternate twice. with nak. and connecting art. Now you should knit a row with a sirloin net. In this case, the columns alternate with v. n. Immediately after this, a row is knitted with connecting st.

Thus, they do the work to the middle, and then knit several rows from st. with nak. After completing the above steps, knitting begins to decrease. At the same time, three c. are woven along the edge of the product. n. Due to this, the work is decorated with a border.

Crochet male bactus

Bactus for men is not much different from women. You can choose Bosnian knitting. And for such purposes, it is advisable to buy stiffer threads so that the relief and hook No. 2 are better visible. It is also important to consider that the product is knitted across.

The work is knitted from the narrow part to the wide, and then goes down. Four in. n., two st. with nak. in the first loop. After the knitting is turned over, after which the first row is woven with connecting sts. At the end they knit ch. and two connecting sts. Next, a row of columns with nak is knitted, and a series of connecting columns is also repeated.

Art is knitted in a row. with nak. alternately with v. n. They also continue to knit with additions through the row. When the work reaches a height of 60-70 cm, it will be possible to start knitting to decrease. They do this until there are three tbsp. with nak.

Bactus for girls

Bactus in children's fashion is used as an addition to the main outfit or headdress. For the pattern, "grandmother's square" or any others are selected. You will need threads and hook number 2.

Knit four in. etc. and are washed in a circle. Three are performed. n. lifting, three in. p., three tbsp. with nak. in the ring, again three in. n. and three tbsp. with nak. in the ring, after three in. p. and art. with nak. into the ring.

They continue to knit in the same way, knitting into an arch in the center of three in. n. three tbsp. with nak., three in. p., three tbsp. with nak., until a length of 50 cm is reached. At the end, they make a harness from st. without nak. with a peak.

Japanese

A variety of baktus offer to link Japanese magazines. This scarf will look great. It is simple and easy to perform.
For its manufacture, it is necessary to follow a simple and understandable scheme. It looks especially elegant thanks to the openwork design.

Unusual bactus "Breakwater"

For such an accessory, you need to tie the angle of the breakwater, which will be created from three parts. Each part includes a different order of additions and subtractions.

Transformer

Bactus-transformer can be not only an addition, but also a full-fledged wardrobe item. It is knitted in the shape of a trapezoid. Thanks to the addition of buttons, it can be more than just a scarf.

It is necessary to knit 4 hundreds in. n., and after three c. n. for lifting. At four in. n. at the beginning knit five tbsp. with nak., alternating them with v. n. Further retreat three in. n. and perform Art. with nak. Repeat this way until the end.

Knit three in. n. for lifting, art. with nak. in the first loop of a fan of five tbsp. with nak., three in. p., column without nak. in the central column of the fan, three c. p., Art. with nak. in the extreme loop of a fan of five tbsp. with nak., c. n. Thus knit to the end.

Connecting Art. you have to climb to the top. without nak. last row and knit like the first row. Fans are knitted in a checkerboard pattern. It should be knitted until 1 fan remains in the center. Then the harness is tied in the first row from st. without nak., in the second fan. Buttons are sewn on 1 side.

Bactus is suitable for any weather and event. Crochet this accessory is made according to the scheme for beginners or advanced masters. When you get acquainted with the knitting pattern of basic elements and columns, it is easy to knit a bactus according to a ready-made description.

Article formatting: Vladimir the Great

Video on the topic: Crochet bactus

How to crochet an openwork bactus:

Not so long ago, new triangular scarves called bactus came into fashion. For their manufacture, knitting needles are most often used, but it is no less easy to crochet a bactus. Products look beautiful and original. Depending on the chosen yarn, they can be warm, massive or airy, summery.

Not so long ago, triangular scarves called baktus came into fashion.

Classic bactus is not burdened with all sorts of details. It is the most common scarf that is wrapped around the neck. But there are more original models. For example, by making tassels or pompons out of thread, you can give the scarf a completely different, more sophisticated look.

The technique of knitting these scarves can be very different. They can be knitted both with ordinary double crochets and with openwork knitting. In any case, the product will no longer look primitive.

The peculiarity of the bactus is also that, depending on the chosen color, the product is suitable for men and women. At the same time, the men's scarf is made in strict, dark colors, and women's products are knitted in brighter, far from always monophonic.

A bold and unexpected decision is a breakwater scarf or a transforming scarf. This is the same triangular scarf, only it looks extraordinary. In most cases, it is knitted with knitting needles, but having mastered the technique of crocheting it, you will be able to create a real masterpiece that will help make the image perfect.

The product looks non-standard, beautiful and exquisite, in the process of creating which not ordinary, but Solomon loops were knitted. Only initially such work will seem difficult, but after the basics of skill are mastered, there will be no more problems with knitting.

Crocheted openwork bactus (video)

Crocheted openwork bactus with patterns: diagram and description

Knitting an openwork scarf is a real art. The patterns that are used in this case give the product a delightful look. The workflow itself is simple and very interesting.

We knit according to the scheme:

  1. Cast on seven loops and make a double crochet in the very first of them.
  2. Make three air loops and knit the column again in the same place.
  3. Now cast on three stitches and knit seven stitches into the arch.
  4. In the next arch, make eight columns.
  5. Run six loops and knit them in the stitch where the chain begins.
  6. Cast on one more loop and work stitches in the third, fourth and fifth stitch.
  7. Dial the loop again and knit one column in the column between the arches.
  8. Cast on three more stitches and knit a column. Repeat these steps twice.
  9. Dial just one loop, knit the third, fourth and fifth loop in columns.
  10. Again, make an air stitch and, at the very last, make a double crochet, three air stitches and one more stitch.
  11. The corner is made by dialing three air stitches and knitting seven columns.
  12. Run one air loop and in the place where three columns were knitted, knit another one.
  13. Knit the arch with seven columns.
  14. Also work one column in the stitch of the bottom row.
  15. In the same way, knit the next two arches.
  16. At the next stage, knit six loops and make a column in the corner.
  17. Run another stitch and skip a couple of stitches.
  18. Knit the next three.
  19. Make another loop and a couple of columns in one of the previous row.
  20. Cast on a stitch and skip two stitches.
  21. Now knit three columns, an air loop and a column.
  22. After that, cast on three more stitches, perform a column, three loops and a column.
  23. Run one loop again, skip a couple of stitches and knit three columns.
  24. Stitch again, knit a column, three stitches and a couple of columns, repeat these steps again.
  25. In the future, repeat the pattern starting from the fourth row.

Knitting an openwork scarf is a real art

When the size meets the requirements, tie the product with single crochets.

How to crochet a Bosnian baktus: a master class for beginners

Bosnian baktus from sectional yarn is very easy to knit. There are no complex motives and huge, obscure schemes. But the product looks perfect. By this principle, you can also knit a children's scarf for a girl. The wavy, unusual ornament of the product will suit absolutely any clothes.

Detailed description:

  1. Start work with four air stitches and two columns in the first of them.
  2. After that, perform three more stitches.
  3. Knit the next line with connecting columns.
  4. Alternate lines of double crochets and connecting columns twice.
  5. Run a row of sirloin mesh, alternating columns with air loops.
  6. After that, knit a series of connecting columns.
  7. Thus, reach the center of the product, and then complete a couple of lines with double crochet columns.
  8. Start decreasing by knitting three air stitches along the edge. Thus, a beautiful border is obtained.

Bosnian bactus is very easy to knit.

Tying the edge of the bactus with a Tunisian crochet: how to make

Finishing the edges of the product is a very important stage of work. The border not only prevents the scarf from stretching, but also helps to maintain its original shape. The easiest way is to tie a bactus with a crustacean step. This method is quite simple and comes down to just a few steps:

  1. The hook must be inserted into the first loop on the right side.
  2. Knit a single crochet.
  3. Insert the hook now into the next loop and knit in the same way.

Finishing the edges of the product is a very important stage of work.

Continue to work according to the given scheme until the entire product is tied.

Do-it-yourself bactus-coal

The scarf received this name not only due to its color, but also to a special pattern.. Wavy, openwork accessory looks incredibly beautiful. It can be worn both on a cool summer evening and on a rainy autumn. Even in winter, such a scarf will be appropriate.

Progress:

  1. Start work with a set of air stitches.
  2. Perform all subsequent actions, guided by the scheme.
  3. Make small tassels from leftover yarn.
  4. Fix them at the corners.

Bactus: how and with what to wear

The popularity of triangular knitted scarves is due to the fact that they can be used in different ways. For example, the summer version is often used as a top, or they simply cover their shoulders on cool evenings.

There are several variations on the use of winter bactus:

  • attach a scarf to your chest, cross the ends and throw over your shoulders;
  • wrap around the neck and tie the ends, place the corner part in the center or turn to the side;
  • throw over your shoulders and wear like a shawl;
  • cover your head with a scarf and tie the ends at the back.

Crochet bactus: very easy to knit (video)

Bactus is an original accessory, which many people still treat with caution. After all, initially it is difficult to understand how to use it, with what clothes to wear. But if you wear this triangular scarf at least once, then you are unlikely to want to use an ordinary scarf instead of such an original one. This is a practical, beautiful, versatile product. You can knit it not only for yourself, but also for your husband or child. As a present to a loved one, such a scarf is just perfect. The process of making this masterpiece will take only a few hours.

A woman of any age - be it a baby or a lady of age - wants to be beautiful and the style of clothing plays an important role here. A knitted bactus, crocheted according to the scheme, created by oneself will help. This scarf combines beauty and a cozy look.

Bactus - what is it?

The scarf is handmade from Norway. Its classical size in the widest part is from 110 to 160 cm. Earlier, in the homeland, it was sewn from pieces of fabric left over from sewing outerwear, and decorated with ornaments, fringe or tassels. Now there are a huge number of decorating options - they are limited only by the flight of the craftswoman's imagination.

Baktuses make it possible to change images daily - modern styles, romance, country, boho, etc. They can be knitted with openwork patterns from multi-colored yarn, a dense single canvas, from motifs, decorated with ribbon, fur, be warm or made of thin "summer" yarn - the possibilities are countless! Also, the traditional pattern, which came from the homeland of bactus, does not give up its position - transverse multi-colored stripes. Shades are used very different - from muted tones to the brightest and most unusual combinations.

Openwork bactus is a great option for a delicate and airy look. It will give your appearance originality, modesty and naivety.

Another advantage is in the speed of production - 2-3 days and you have a new thing ready!

How to wear and with what to combine a scarf-kerchief?

It is perfect for any style, regardless of the time of year. Coquettishly complement your strict blouse, boring jacket and even a men's shirt or jacket. The scarf-bactus is a universal thing, suitable for both women's and men's wardrobe. There is no need to talk about children - such an addition to clothes looks very touching and interesting. The stronger sex also began to use these scarves to highlight individuality and brightness. So, bactus is a unisex thing. Therefore, if it is correctly selected, it will become very appropriate in the image.

The fashion for this accessory has led to the fact that there is a huge variety in the models and styles of such a scarf.

There is no single option for tying a bactus. There are a huge number of original ways to wear.

A classic of the genre is the location with an obtuse angle forward, and 2 free angles cross behind and also fit in front.

They wear bactus and throw it on outerwear - it looks very picturesque.

In summer, cotton or viscose scarves are used - it looks great, and besides, it is very functional!

Features and benefits of bactus over a regular scarf

This is a practical item in your wardrobe, which perfectly protects from frosty winter weather, chilly autumn wind, saves your shoulders and neck on a scorching hot summer day. You can use it as a bolero vest or tippet.

When choosing yarn to create a bactus, be guided by the purpose of the thing and the time of year. Very often, silk, cotton, wool or cashmere threads are used for these purposes.

For example, for the office, knit it from silk or viscose - "cool" threads will not cause inconvenience. Create a warm accessory for autumn and winter from thick warming yarn, and for the summer, knit an openwork bactus from cotton or linen.

Tools and materials

Threads for knitting baktus must be elastic and dense, otherwise the finished product will not be able to keep its shape well. It is advisable to choose a yarn containing merino wool, lamb or cotton. It can be mixed, but must contain at least 50% of the above components. Let's say both 100% merino yarn and cashmere + merino yarn are suitable, in a 50/50 ratio. Experienced knitters willingly use yarn from bobbins - there is a much larger footage than when knitting from hanks.

So, take yarn like this:

  • merino;
  • merino + cotton;
  • merino + cashmere;
  • lamb wool yarn;
  • alpaca + silk;
  • various blended yarns with at least 50% merino/lamb or cotton.

This choice of thread is the basis, but far from being an ironclad rule. This is creativity, not a strict methodological process, so experiment and invent, try and create! For example, cashmere has become a discovery for many needlewomen - the yarn is very soft and delicate, you can’t call it elastic and dense, but it looks amazing in bactus - it fits perfectly into the pattern!

Just keep in mind when buying that cashmere thread is much lighter than wool, which means that its consumption will differ from the description, and the weight must be calculated in advance.

Also choose the color of yarn for knitting to your taste. You can create a bright cheerful bactus that will cheer you up, or you can make a muffled calm scarf. Threads can be taken plain or with a transition of colors. If you knit it from 100% cotton or linen yarn, then you can wear it in the summer.

Crochet bactus - diagram and description for beginner needlewomen

A beautiful blend of alpaca and silk is the best choice for creating warm garments. The product will turn out warm, soft and gentle to the touch.

Introducing crocheted crocheted bactus and patterns. Knitting new items in your wardrobe begins with a side corner. This product is easy to combine with clothes of any style.

The final dimensions of the scarf are approximately 160 / 65 / 65 cm.

So, we need to prepare yarn (75% alpaca lamb wool, 25% silk, 200 m / 40 g), hook number 4.

We knit a bactus crochet according to the scheme, the description is given further.

For a pattern of rhombuses, a chain of twelve air loops + 3 air loops (rise) is typed, we knit, guided by the attached diagram.

The work on crocheting a baktus according to the scheme comes from the corner, constantly adding diamond-shaped elements from the fifteenth to the twenty-second row and adding loops on one side. Next, we knit in a mirror image, with a gradual one-sided decrease in loops. We tie the finished product with single crochets. We make 2 small brushes and attach to the corners of the scarf.

Scarves from motifs

What a great piece of clothing - baktus! Let's get down to business and crochet a simple openwork bactus according to the pattern for beginner needlewomen!

To do this, you need 100% cotton yarn - 170 m / 55 g, hook number 2.

Knit 36 ​​square motifs and 12 triangular motifs according to the attached pattern. You can connect them in the course of work, picking up and pulling the thread through the arches of neighboring elements, or you can sew all the connected squares and triangles with a needle. Steam the finished product and decorate the corners with tassels, pompoms or large beads.

It is not necessary to crochet an openwork bactus. The motif knitting pattern can also be with a dense pattern, therefore, a scarf too.

Tie 42 squares and 14 triangles according to the indicated pattern. You can do this from yarn of the same color, combine several shades in each square or knit all the squares of different colors - it's up to you, just choose the combination very carefully so as not to get a clumsy bad taste. Before sewing everything into one common canvas, be sure to steam all the elements. Now sew with a needle or connect with tying with single crochets (let the seam be on the front side), decorate the edges with crocheted fringe.

Schemes of simple bactus, crocheted

The next wonderful triangular scarf is made of cotton and viscose. Knitting in this case goes from the central part to 3 sides. The schematic description contains, in addition to the usual double crochets, also embossed triple crochets.

Decoration methods

There are a huge number of opportunities for decorating bactus.

For example, one of these methods is knitting with small beads or using beads. For this, a thin yarn is taken, the end of the thread is threaded into a needle, all the prepared beads are strung on it. It is moved aside, and in the process of work, the beads are knitted into the pattern one by one.

Binding the edge of the product with a border - fringe.

Pompoms, tassels, large beads are attached to the corners of the bactus - in addition to the decorative use, they also have a functional role - they make the ends heavier and prevent them from moving out.

Also, the edges of the scarf-kerchief can be tied with single crochets or fans, along the entire perimeter, pull a fringe from the yarn remaining after knitting.

Crocheting a bactus according to patterns is a very exciting and very simple activity that will help you acquire more than one fashionable new thing!


Top