Which manicure is better, hardware or edged - practical tips and recommendations. Which manicure is better: hardware or edged? Features and Recommendations

Representatives of the fair sex dream of keeping their nails beautiful and well-groomed. For this purpose, it is possible to give preference to hardware manicure, which is gaining increasing popularity.

When deciding to carry out such a procedure, you need to be prepared for obvious advantages and a decent result, subject to certain nuances.

What is required for a hardware manicure?

A special device designed for manicure is a modern device with various removable attachments. It is assumed that it is possible to effectively treat the nail plates and the skin around them. In this case, it is assumed that there are several attachments and cutters, which are made from different alloys and ceramics, and may be diamond-coated, and it is the configuration that affects the functionality of the equipment.

Professional machines for hardware manicure differ in rotation speed, and accordingly - processing intensity. The high power of the devices used makes it possible to successfully improve the condition of nails that are in a neglected state.

Experts note that hardware manicure can be performed without pre-soaking nails and cuticles. This nuance helps prevent unwanted risks and eliminates potential skin damage. It is mandatory to sterilize cutters and use antiseptics, so that negative effects are completely eliminated.

Features of hardware manicure

It is important to note that hardware manicure can be carried out using standard technology, the results of which can actually be impressive.

1. Before starting the procedure, clients' hands must be treated with an antiseptic.
2. At the next stage, you can shape the nail plates along their free edge. To do this, use a coarse-grained file or a disk cutter attachment.
3. The side ridges located near the nails and the cuticle are traditionally treated with a needle-shaped fine abrasive nozzle (mill). In this case, you can use a needle-shaped cutter to outline the outline of the cuticle, carefully lifting it.
4. Use a rounded bullet-shaped nozzle to remove the cuticle. In this case, the base of the nail plate is given a neat shape.
5. The nail sinuses are cleaned using a ball nozzle with a special diamond coating.
6. The nail surface is treated with a fine abrasive diamond cutter.
7. The skin around the nails is treated with a finely abrasive cylindrical cutter. It is assumed that the removal of rough parts of the skin and calluses is mandatory.
8. Use a felt cutter to polish the nail surface. The main task is to eliminate unwanted yellowness and give nails a natural shine.
9. Hands are treated with a disinfectant with a moisturizing effect, nails with a special nourishing cream.
10. After a hardware manicure, it is assumed that you can coat your nails with varnish. However, the nail plates are first degreased with a special liquid, which guarantees the prevention of negative effects on the nails.

The standard technology described above is the most familiar option for those who care about a flawless manicure.

It should be noted that processing with a milling cutter directly depends on the type of cuticle. The master must select the optimal processing option in order to guarantee a decent result and prevent unnecessary risks.

The following options for the procedure are provided:

1. The cuticle, which is not adjacent to the nail plate, is treated with a diamond needle cutter. To do this, the cuticle is moved away from the nail, after which the treatment is carried out.
2. For soft and moist cuticles, use a rounded diamond cutter made in the form of a roller. The best option is traditionally considered to be a product with a medium or soft abrasive, and the diamond stones should be applied fairly evenly to the surface. Otherwise, after processing, burrs may appear, which are not so easy to deal with.
3. To process dry and thin cuticles, a drop-shaped cutter made of abrasive stone is traditionally used.

Correctly selected technology will certainly allow you to successfully perform a hardware manicure that will add beauty to your nails.

Benefits of hardware manicure

The hardware manicure procedure has worthy advantages, which determine the high level of popularity of this nail treatment technology:

• High level of security. Proper use of the device and the addition of antiseptics prevent the risk of infections.
• No risk of injury. Hardware manicure does not use sharp objects, so there is no risk of skin damage.
• The growth of the treated cuticle slows down, making subsequent care much easier.
• No need to steam the skin before removing cuticles. This helps prevent excessive dryness of the nail plate.
• Hardware manicure required minimum time for its implementation.
• Using a special device allows you to achieve the ideal nail shape.

The above advantages make hardware manicure a worthy option for nail care.

Disadvantages of hardware manicure

It is important to note that the procedure has potential disadvantages, so you should not count on a flawless nail care option:

• Hardware manicure places special demands on the professionalism of the master. Otherwise, careless movements and rapid rotation of the attachments may damage the nail plate. If you turn to an experienced specialist, you can count on a successful procedure.
• For high-quality treatment of nails and cuticles it is required presence of a large number of attachments.
• There is a potential manifestation mild, minor pain. This discomfort may be due to the high rotation speed of the attachments used.
• Hardware manicure is not always suitable for ideal treatment of nail plates with cuticles. It is possible that the master will still need to use tweezers and nail scissors.
• Hardware manicure will not always be effective for very neglected nails, for which only a classic trimmed manicure is suitable.

Such shortcomings indicate that nail care must be constant and interaction with an experienced nail technician is truly important. Hardware manicure allows you to successfully treat nails to give beauty to women's hands.

Every day, hardware manicure in a salon is gaining more and more popularity. Despite this, not all people know about its features, and therefore cannot understand what the danger of this procedure is and whether it exists at all.

In the article you can view photos of a hardware manicure in a salon, as well as read basic information about it. The effect obtained as a result of the procedure pleasantly surprises all girls, so this manicure is really worthy of attention.

Is it safe to have a hardware manicure in a salon?

The question of the dangers of the procedure interests many clients of beauty salons. When girls ask them, they most often focus on all sorts of cases and stories that they found on thematic forums. As a rule, the adverse effects of manicure are associated with unprofessional use of equipment at home without proper qualifications. Real experts strongly recommend abandoning cheap, low-quality equipment, and even more so, using it yourself.

Anyone with a hardware manicure can easily be checked for compliance with the requirements for specialized specialists. Thanks to this, it will be much easier to determine whether the procedure in a given place is dangerous or whether you can safely sign up for it. To ensure the safety of the service, an employee of the salon chosen by the client must:

• undergo training that includes not only a theoretical, but also a practical part;
• study safety procedures and undergo regular requirements checks;
• become familiar with the principles of operation of tools and equipment, as well as methods of processing skin and nail plates;
• gain practical skills under the guidance of an already experienced specialist.

If the above requirements are met, the question about the danger or safety of hardware manicure automatically disappears. If a specialist really does everything correctly and has good experience in this field, then you can be completely sure that the procedure will not harm your nails and skin in any way, so there is nothing wrong with it.

European technology

Hardware manicure in the salon is carried out without the use of piercing and cutting devices. In this case, the procedure is carried out by removing dead parts of the epithelium. It is for this reason that modern hardware manicure is considered a variety of European manicure.

These two procedures are quite similar in technique and effectiveness. But there is one difference, which is that the hardware version uses only one machine with replaceable attachments.

Classic

A classic hardware manicure in a salon can be called a combination of incompatible things. These two services are fundamentally different in many respects.

In a classic manicure, a specialist uses scissors, tweezers and nippers. With hardware, as mentioned above, none of this can happen. The first case involves the removal of rough skin surrounding the nail plate, the second involves the use of a cutter, which removes all excess at high speeds.

Secrets of perfect results

Unfortunately, just a description of a hardware manicure in a salon is not enough to get a clear idea of ​​it. To do this, you will also need to consider certain nuances of the procedure that help achieve the desired result the first time.

The main secret is choosing a good device. To do this, you need to pay attention to the following nuances:

• a normal device must operate from the mains, since only in this case it will have enough power to treat the entire surface of the skin;
• the handle of the device should lie comfortably in the hand, since you will have to work with it for a long time;
• the machine must allow the owner to adjust the speed in order to properly treat each zone;
• The optimal rotation speed is considered to be more than 3 thousand revolutions per minute.

It is these factors that must be taken into account when choosing equipment. It doesn’t cost that much, of course, but still, not everyone wants to pay for some trinket that will break after the first procedure.

In order to save money on visiting the salon, many girls do the procedure themselves. Unfortunately, not everyone can achieve a good result, since this requires at least some skills. Although you can try to perform the procedure yourself, subject to certain recommendations:

• You must hold the handle so that your hand does not become numb or shake;
• a weakened plate requires careful care, so you need to choose attachments with weaker abrasiveness;
• Before the procedure, you must make sure that the skin around the nails is dry;
• the direction of movement when processing with the device should be directly opposite to the movements of the nozzle;
• when performing the procedure for the first time, the number of revolutions should be minimal;
• steaming procedures before starting nail treatment will not lead to anything good.

Advantages

Hardware manicure in a salon or at home allows you to eliminate rough areas of skin that always spoil your appearance. The procedure itself is completely safe if it is performed by a real master. The device nozzles do not have cutting or sharp ends, so it is extremely difficult to get harm from them.

A manicure of this type does not require preliminary preparation. To achieve the desired result, you do not need to soften the skin and nails, which helps prevent the risk of their weakening due to dryness.

The hardware procedure involves the use of special attachments. Thanks to them, it is much easier to achieve symmetry in the shape of your nails. All girls consider this fact an advantage, since other methods of changing the shape of nails do not always help in this matter.

Flaws

Experience and skill in hardware manicure come only with time. If you use the device incorrectly, you can scratch your nails or leave grooves. In certain situations, during the procedure, pain may occur due to strong pressure from the device. In addition, before going to the session, you need to take into account that for owners of nails whose condition is too advanced, this manicure will not be suitable, since to bring them back to normal will require preliminary steaming, which is unacceptable when using a machine.

Hardware manicure: Moscow salons

Today, the capital's beauty salons are especially popular, where, in addition to body care services, you have the opportunity to visit a hardware manicure. The best places for this procedure are:

1. "Marigold." The salon gives girls the opportunity to attend procedures for nail extensions, hardware and classic manicures. Not only girls, but also boys can come here.
2. "Ego-SPA". It provides services not only for manicure, but also for hardware pedicure. Our specialists know how to communicate with clients and find an individual approach to each of them.

All of the listed salons serve more than a hundred visitors every day, who always leave satisfied. The cost of the service is not so high, so every girl who wants to look good and well-groomed in any situation can afford it.

What is hardware manicure? This is a method that allows you to process your nails without using cutting tools. The process does not injure the delicate cuticle and side ridges; it is performed using professional equipment. An edged manicure can complement a hardware manicure only if there is a need for it.

Manicure devices are designed for home treatments for nails, as well as hands and feet. It is very easy to understand the control of the device: the instructions for the equipment describe in detail and step by step the entire operation scheme, showing how each attachment is installed.

Very convenient and easy-to-use devices are manufactured by the Strong company. The most popular is the Strong-204 device, which develops up to 35,000 rpm, is functional and compact. If the device overheats, it automatically turns off, which prevents breakdowns.

More information about hardware manicure: method of execution

Hardware manicure is performed using a special tool that resembles a thick felt-tip pen or marker. On one side it is attached to the manicure apparatus, and on the other side of the tool a hole is created where cutters of different diameters, abrasiveness, length and shape are installed.

The master independently adjusts the rotation speed of the drill: 5,000–35,000 rotations per minute. For delicate dermis, the speed selected is low and the cutter is thin. For a rough surface it is the other way around. More detailed instructions for choosing nozzles are available in the instructions for the devices.

The manicure machine can also be used for foot care.

Rules for unedged manicure

The main thing to remember is that it is strictly forbidden to perform a hardware manicure on wet skin: this will lead to microtrauma.

You need to choose the right nozzle size for hardware manicure. If not processed correctly, cutters can remove the excess layer of dermis, causing sensitivity. Strong pressure may leave grooves on the nail plate. But don’t worry about these consequences and trust the nail treatment exclusively to a master: watch the training videos, carefully study the instructions, and you will master the basic techniques for performing an unedged manicure.

With attachments you can very quickly cut off layers of shellac on nails and keratinized skin, which is why hardware manicure is more often used when treating extended nails and pedicures.

To perform the procedure efficiently, you need a good professional milling machine with a large selection of cutters that fit onto a rotating drill. The cutters directly impact the surface of the nails and dermis.

Corundum nozzle

A spherical and oval-shaped cutter is used in hardware manicure for delicate treatment of the nail plate and hands, toes and feet. After using corundum coatings on drills, the skin is smooth and does not peel off.

The abrasive material is baked onto the base of the drill using a special adhesive composition. Periodic cleaning is necessary because the grooves between the protruding abrasive elements become clogged.

Ceramic nozzles should not be used to clean the space under the nails: otherwise you risk damaging the nail.

Diamond bit

There are two types of nozzle: sintered and deposited. Sintered ones are good for filing off acrylic, but precipitated ones (with spraying) are more convenient to process nails and remove layers of gel, file off the side ridges and shape the free edge of the nail. They cannot be used to file away the delicate skin of your fingers: it is too sharp a tool, but it removes the cuticle well. A large-sized precipitated diamond cutter (6–7 mm) is used for pedicure.

Metal (carbide) cutter

Tools of this type are used for hardware manicure for the feet, removing corns, eliminating cracks, removing excess layers of gel or acrylic, and dead skin between the toes. They can be used to pre-treat the nail plate. The notch of metal cutters is very small and non-traumatic.

Felt polishing pad

Used to add gloss to nails and finish the dermis.

Rubber nozzle and abrasive caps

What it is? Nozzles with an abrasive coating are put on a rubber cap and attached to a cutter - you get a convenient consumable for cutting off the dermis from the feet. Disposable caps are suitable for grinding away rough areas of skin on the heels and toes.

All manicure sets for working with the device and the device itself, new, you can always purchase in our online store.

What do you need to use the device at home?

In addition to the milling machine, you will need special products (liquids, oils) for nails and hands: softening, caring, disinfectant. You will also need consumables: napkins, cotton pads, orange sticks, nippers for thin skin (sometimes it is wiser to partially cut off the excess cuticle than to file it), cotton swabs, nail files. It is important to choose files for the nail plate wisely.

The device itself will be more convenient if it has a built-in mini-vacuum cleaner for collecting exfoliated particles of the dermis. If you don't have one, we recommend purchasing it separately. Working with him is much more pleasant, and the procedure will be neat and aesthetic.

Hardware manicure technique step by step

Before you take on a hardware manicure at home, carefully study the training video from a professional master and read the instructions to help you master the information.

Prepare your fingers and nail plate for the procedure. Treat the cuticle with a softening agent: then its removal will be painless during a hardware manicure. Using a diamond tip, remove it and the skin around the nail bed. Monitor your sensations: immediately remove the tool if you feel a slight burning sensation and the skin turns slightly pink. If touching the skin causes pain, you either cut off the excess layer, or selected the wrong attachment and speed. Choose a more suitable cutter. Do not touch the damaged areas of the dermis: stop the procedure, repeat it in a few days, when a new layer of epidermis has grown.

Do not hold the tool at one point: move it slowly and evenly over the entire surface to be treated. Do not press the drill with the attachment too hard against the skin or nail surface, adjust the pressing force, rely on your sensations. Under no circumstances should you feel pain or discomfort!

After removing the dermis layer, file your nails to give them the desired shape.

Polish your nails with a special nozzle, but do not bring it close to the surface of the nail. Move the nozzle along the surface so that it does not stay in one place for more than 0.5–1 seconds.

After finishing the nail plate, lubricate it with cuticle oil and wait until it is absorbed. Then you can wipe your hands with a grease film remover and begin painting the nail plate. Then apply the varnish as usual. Allow at least 15 minutes between applying oil and varnish. The oil needs to be well absorbed.

IMPORTANT! Do not treat the inflamed dermis, be careful, do not do a pedicure if you have wounds and deep cracks on your heels.

Which manicure is better: hardware or edged? Advantages and disadvantages

Obvious advantages include the speed of nail care and the aesthetic appearance of the hands after the procedure. The savings from purchasing a milling machine become noticeable after several months of regular hand care: the device completely pays for itself - you do not spend money on salon procedures or on the services of a master that you no longer need. Safety is important: with the untrimmed method, the skin is not injured, there are no abrasions or cuts.

Beautiful and well-groomed hands mean not only smooth and soft skin, but also a neat manicure. When a woman looks decent, men notice her, she becomes a role model and an object of envy for her rivals. Which is better to do a manicure - edged or hardware? Read about it below.

Edged manicure: features

Classic edged manicure is most often done in salons and at home. It is available to every client. Which manicure is better - hardware or edged? It is difficult to answer this question unambiguously, because each of the types (there is also unedged) has its own advantages. During a trim manicure, the cuticle is removed with scissors, the nail plate is processed, rough areas of the skin are softened with oils and also trimmed. This manicure is also called “wet”, since the skin of the hands is first steamed in a bath and prepared for further manipulation. The nails are given a certain shape, then a varnish coating is applied to the plate.

Hardware specifics

To perform a manicure, special devices are used, which are sold with a set of attachments. Hardware-type equipment can be portable or stationary. The first is used when a master visits a client’s home, and the second - in salons and at home. Which manicure is better - hardware or edged? In the first case, it can be either a separate procedure or part of a set of services aimed at caring for nails and hands. It is possible to do such a manicure yourself, but before you start, you need to look at the work of a specialist at least once, and also read the instructions for the device.

Hardware manicure is a type of nail care in which the rough skin on the fingers and cuticles are removed. During the procedure, various attachments are used that carefully remove the stratum corneum. This type of manicure is modern and effective.

Hardware manicure technology

Judging by the reviews of edged and hardware manicures, the second technique can be easily repeated at home. What is it?

1. First, treat your hands with antiseptic.
2. The free edge of the nail is shaped using a 240 grit stick.
3. Take a needle-shaped nozzle (fine-abrasive diamond cutter) and process the cuticle from the sides.
4. Continue to move along the cuticle with this cutter, lifting it.
5. Remove cuticles with a bullet tip.
6. Carry out processing with a fine abrasive cutter.
7. Apply cream and degreaser.
8. Cover your nails with polish.

If your nails and the skin around them are in poor condition, it is better to entrust a hardware manicure to a specialist.

How to do a trim manicure

This is the most common type. It is inexpensive and you can make it yourself at home. The classic procedure consists of the following steps:

• nails are given the desired shape using tweezers, scissors and a file;
• Soft oil is applied at the base of the nail near the cuticle, and hands are immersed in a warm solution for fifteen minutes;
• then the cuticle is moved away from the nail plate with an orange stick;
• dry the hands, then cut the cuticle with scissors or tweezers, starting from the edge of the nail, moving to the center and the opposite edge;
• remove remaining burrs.

Many people are interested in which manicure is better - hardware or edged. Read below about the advantages and disadvantages of these types.

Advantages of the technique

Which is better - hardware manicure or edged manicure? Each of them has its own advantages and disadvantages. The advantages of hardware include:

• profitability (the equipment is inexpensive, but you can use it for a long time);
• With the help of the device, manicure is done faster, that is, the procedure saves time;
• hardware manicure is safe, that is, it is impossible to “pick up” a fungal infection, cuts, cracks, and other damage are excluded;
• nails remain well-groomed for three weeks;
• the device is completely sterile;
• This way you can do a manicure for both women and men.

Many masters praise the hardware method of caring for cuticles and nails. But in order to fully understand which manicure is better - hardware or edged, you should study the pros and cons of each type of procedure. Among the advantages of the classic are the following:

• Manicures can be done independently, that is, without the help of a specialist;
• the procedure is inexpensive;
• if you get a manicure in a salon, and the manicurist is a professional, then your hands will look well-groomed for more than a week;
• does not require additional equipment costs;
• versatility;
• availability.

Which manicure to choose depends on personal preferences, material income and the condition of the nail plate.

Minuses

The disadvantages of the hardware method include the following:

• Only trained masters can do such a manicure correctly;
• the procedure can be painful if done unprofessionally.

Disadvantages of edged manicure:

• rough impact on the nail plate can cause the nail to grow unevenly and its surface to become wavy;
• the skin around the nail is easy to injure with scissors and forceps;
• A trim manicure should be done every week, otherwise your hands will look unkempt.

It is important to find your master, then problems will not arise.

Modern hardware manicure is popular, but many still believe that it is harmful or dangerous. Such opinions are based on a misconception about the principle of operation of the equipment, since the client of the salon does not risk anything.

Automatic nail care methods have recently begun to gain popularity, but their effectiveness has already surprised many women. Many people are hesitant to switch from classical methods and ask questions about the dangers of hardware manicure. There are many misconceptions about the dangers and possible harm from this procedure that are spreading in various communities. Most of them are explained by a lack of knowledge about the features, specifics of such services, and the operating principle of the equipment used.

What are the features of hardware manicure?

When deciding for yourself whether hardware manicure is dangerous, pay attention to some features of stationary equipment that is used in professional beauty salons. This type of nail treatment refers to untrimmed methods and does not involve any cutting attachments or movements of a specialist. All stories about injuries and cuts received while using the machine are fiction. The likelihood of causing such damage exists only when using classical tools - scissors, files and others. The device works by filing, grinding, grinding, which eliminates the possibility of causing harm to health.

Many girls, learning about the complete safety of this procedure, begin to be interested in other features of this service. The master is often asked whether hardware manicure is harmful. This interest is quite natural, since women's skin is very soft and delicate, therefore, in the absence of experience, doubts arise about the possibility of its automatic processing. But when using high-quality devices and components, a highly qualified specialist, a result is achieved that far exceeds the effect of a classic manicure service.

The following basic parameters allow you to make a hardware manicure completely harmless to the nail plates and skin:

• special surfaces of nozzles, which are designed for the softest and most accurate processing;
• the ability to automatically adjust the rotation speed of the chuck depending on the specific operation;
• strict adherence to the technique of providing the service, including the sequence of actions and the angle of inclination of the handle;
• selection of a suitable working surface for grinding, leveling, grinding and changing it if necessary.

What explains the rumors about the dangers of hardware manicure?

When asking why hardware manicure is dangerous, women often rely on various cases and stories told on thematic forums. Most of them are associated with unprofessional use of a portable machine at home. Experienced professionals do not recommend purchasing such equipment or using it yourself. Its cost is low, but the quality is low. It is almost impossible to get well-treated nails this way, and the likelihood of damage is extremely high. The Favory salon has reliable stationary equipment, which is operated by qualified specialists.

Sometimes, as evidence that hardware manicure is dangerous, its opponents argue about the rotation speed of the machine’s cartridge. Its average value is 1500-5000 revolutions for portable models or 30-50 thousand revolutions per minute for professional stationary equipment. But this indicator does not indicate a high probability of receiving any injury if the nail technician has sufficient qualifications. Practice shows that all statistics on injuries and damages are taken from stories of the use of small devices at home. That is why the main guarantee of safety is the skills of a specialist.

Compliance with the listed requirements removes the question of whether hardware manicure is harmful. The service is completely safe, allowing you to reduce the time of nail treatment and achieve a high-quality result that cannot be obtained by cutting methods.