home › Tests › The best threads for making tassel earrings with your own hands - we test which threads to use when creating jewelry with your own hands. Brush earrings made of beads or threads - how to make them yourself and what to wear them with

The best threads for making tassel earrings with your own hands - we test which threads to use when creating jewelry with your own hands. Brush earrings made of beads or threads - how to make them yourself and what to wear them with

Hello, dear readers! Probably, every female representative has more than a dozen of a wide variety of earrings in her box. And such collecting is not in vain, because skillfully matched earrings to an outfit can enliven the entire look in a matter of seconds! But you can make earrings yourself. In this review, the site “Kabluchok.ru” will demonstrate how easy and quickly you can make tassel earrings with your own hands.

We have already told you before. Well, in short, they get along wonderfully with almost any everyday things: jeans, leather twists, sundresses, denim dresses, suede jackets, leather pants, denim shorts, etc.

Method No. 1.

To create them you will need:

Thin cord or dense threads of several shades (sold in sewing departments).
Scissors.
Accessories - hats, beads, earring hooks, wire with a hook (everything can be bought in the accessories department of a sewing store).
Pliers and wire cutters.
Transparent moment-glue.

Making tassel earrings.

We cut all three shades of thin cords into pieces 20 cm long. We take all the cords in our hand and fold them in half. We tie a thread in the center so that the product is fixed and acquires the desired volume. The excess ends of this thread need to be cut off.

We take a hat, thread a wire with a hook into it, apply glue-gel moment to the inside of the hat, and put the hat on the top of the gathered cords. Next, string a bead onto the wire and use pliers to create a hook. We remove the excess wire using wire cutters and use pliers to correct the hook.

We hang the earring hooks on this hook. We take sharp scissors, hold the ends of the fringe of the earrings in our hands, and trim them evenly.

These are the chic earrings you get as a result of simple manipulations.

Method No. 2.

To create them you will need:

Orange thin cord (you can buy it at a sewing store).
Gold thin cord (sold in sewing stores).
Accessories: small rings, earring hooks.
Scissors.
The glue is transparent.

Let's start creating them.

We cut the orange cord into pieces 18 cm long, about 10 pieces for one earring. We thread them all together into a previously prepared ring with an earring hook pre-attached to it, and bend all the threads in the center.

We retreat 8 mm from the top and wrap the product with a thin gold cord. We fix its tip with transparent glue or a glue gun. The ends of each earring must be trimmed with scissors to the same length.

DIY thread tassel earrings (video):

We hope these master classes will encourage you to create your own stylish tassel earrings. We assure you that the process of recreating them is quite fascinating, and the earrings themselves turn out incredibly bright and beautiful.

They don’t draw, but they draw an image, an image in the style. The prize sector on the reel goes to those who thought about brushes.

Their clean geometric lines are in keeping with the spirit of the first third of the 20th century. This is the time of the emergence of constructivism and cubism.

The first called for abandoning complex forms, putting conciseness at the forefront. The paintings of the cubic style, in general, were complex, but were composed of the simplest geometric elements.

Art Deco, manifested mainly in costumes, borrowed from the movements the desire for clear simplicity.

Simple silhouettes in clothing required reinforcement. One of them became earrings tassels. Why designers remembered them in the 21st century, we will look further.

Features of tassel earrings

Externally tassel earrings- this is usually on a loop. This is the name of one of the types of fastenings.

This is not quite, because it does not close, but is held in the lobe only due to its curved shape.

There are also models with clips, like those, or, as they are popularly called, studs.

On the outside of the lobe there may be a decorative one, or it may go down below.

You definitely can’t do without one thing - a brush made up of long strips, or.

You can consider options in the collections of Dolce&Gabbana, as well as Vita Kyn. One Italian fashion house.

The Sicilian theme is close to bright, large, but simple in shape. The second designer is a Ukrainian who has brought back popularity to laconic-cut outfits dotted with traditional embroidery.

They go great with these dresses, tunics and blouses. thread tassel earrings, or .

A large shape is a mandatory requirement for brushes. Often, they hang below the level.

There are no higher ones at all. Otherwise, the structure, as well as their fasteners, may vary. Let's get acquainted with the main types of execution.

Types of tassel earrings

You can glean examples not only from fashion designer shows, but also from photos with celebrities.

Among the Russian ones, for example, Alsou, Maria Kozhevnikova, and Evelina Bledans often appear in the form of brushes.

The latter, for example, prefers models from the KoJewerly house.

Tassel earrings buy everyone decided differently. Thus, Alsou chooses samples that look like studs, with a single chain extending from them, which is crowned with a small but voluminous brush.

Both she herself and the rest of the parts are made of metal. Alsou acquires gold tassel earrings, or platinum models.

Tassel earrings in the photo with Maria Kozhevnikova are combined, that is, they consist of different materials.

The actress complements the upper, metal part with silk and. Some Marias are hybrids of brushes and.

The latter are classified as having a large number. We put tassels instead and get something in between the two types of earrings.

Beaded tassel earrings, , metal, leather fringe, can be solid or collapsible.

The lower part of the latter is detached. Based on one top, it is possible to create several different ones.

Now, let's look at the configuration of the brushes themselves. Evelina Bledans, for example, sometimes, the threads of which are not collected in a bundle, but are attached in several rows to the base.

The starting “point” can be rectangular, with large petals, inverted. These resemble waterfalls rather than brushes.

DIY tassel earrings

The photo below shows one version of DIY tassel earrings, and the version described in the text can be seen in more detail in the video clip at the end of this chapter.

Question, how to make tassel earrings, not from complex models. The easiest options to make from threads. Tassel earrings require from 9 positions. 6 of them are used in, 3 are auxiliary, for example, cardboard.

A silk thread is wound around it. Usually, they take cardboard 10-12 centimeters wide. The average thread consumption is 200 revolutions around the warp.

Having made them, we take them under the silk and tie thin threads on one of the ends of the cardboard.

This will keep the bundle from falling apart when we cut the yarn at the other end of the warp.

By the way, you can get started. You will need a second auxiliary item -.

Having removed the threads from the cardboard and holding the place of preliminary fastening, we fold the bundle in half.

Having retreated a centimeter and a half from its top, we wrap it in floss. A few turns are enough, but any number is not prohibited.

We tie the end of the floss and drag it between the curved silk threads of the top of the brush. There should be about 5 centimeters of floss left.

Now we decorate the place of the winding. You can attach, for example, using a third auxiliary item - adhesive.

All that remains is to string several, or one, on a thread, attaching the product to the earpiece. This is what the loop clasp is officially called. Here you go tassel earrings.

Master Class showing how to make brushes from more complex ones. Let's say we want a 7-centimeter length.

This means you need 140 centimeters of nylon thread + 10 centimeters for allowance, that is, tails.

They will be needed to attach the brush to a metal base called a pin with. You can make the part yourself from wire, or buy it from.

So, we take one-color or multi-colored. The ideal width of the inner hole is size 10 beads.

We divide 140 centimeters of thread into three equal sections so as not to get tangled during work.

We insert a thread into a special long one for beads and string the beads. We mark the length of 7 centimeters using a ruler.

Having collected the beads, we skip the last bead, going around it. We thread the thread through the remaining elements in reverse order.

Having left the row, we fasten the thread to the eye of the pin and continue to pick up rows one after another. When the brush is formed, we wrap the ends of the thread around the metal base.

We put a decorative cap on top. It will cover the junction of the elements and decorate the earring. It is also purchased with fabrics and accessories.

Place a bead over the cap and bend the rest of the pin into a loop. All that remains is to attach the earring to this loop and choose the appropriate outfit.

The new review brings to the attention of readers 12 stylish jewelry, each of which can be made with due diligence and attention to the issue with your own hands. Definitely, any of these crafts will help make a positive impression on others, so take a look and remember.

1. Thread earrings

Original long earrings that will be a wonderful addition to both an everyday look and an evening one, and the process of creating them will take no more than half an hour. To create such earrings, you need a skein of floss thread of the color you like, which you need to carefully cut, form two tassels, attach loops to them, secure with a thread of a contrasting color and put on base hooks purchased in a specialized store.

2. Necklace made of pins

Using safety pins of the same color and size, beads, and two strong cords, you can create an unusual and very impressive necklace that will become an elegant addition to any look.

3. Resin pendants

You can create incredibly beautiful pendants from epoxy resin without much skill or effort. To do this, you need to put dried flowers, shells, beads or sparkles in special silicone molds, fill them with epoxy resin, pre-mixed with a hardener, and wait for it to harden.

4. Glitter pendant

A simple and at the same time very attractive shimmering pendant that you can make yourself from a metal base, decoupage glue and glitter. The glitter should be carefully laid out in layers on a base coated with glue. Each new layer must be smeared with glue and filled with glitter until they fill the entire pendant.

5. Bright necklace

A stunning large dyed bean necklace will be a wonderful addition to your spring and summer look. The painted beans along with the fittings must be glued onto thin plastic according to a specially prepared template. When the layout is finished and the glue has dried, the necklace needs to be carefully cut out, holes made on the sides and secured to the chain.

6. Asymmetrical necklace

An original asymmetrical necklace in the Christian Dior style, which can be made from a hoop by sewing strings of beads of different lengths to it.

7. Choker

An ultra-fashionable choker with a ring in the middle, which is not at all difficult to make with your own hands. To do this, using glue and a small ring, you need to fasten two identical pieces of thin velvet ribbon and equip the product with a clasp or ties.

8. Statement necklace

An original massive necklace made of rope and knots, which, despite the simplicity of its creation, will become a universal decoration and addition to any outfit.

9. Necklace-harness

An ordinary clothesline can be braided with threads of beads and you can create a unique and very beautiful neck decoration that will undoubtedly attract attention to its owner.

10. Wooden earrings

From small wooden blocks, special fittings, glue and varnish, you can make unique long earrings, which will surely appeal to all lovers of natural materials and connoisseurs of creative things.

11. Dream catchers

Simple to make, but at the same time beautiful and airy talisman earrings, which you can make yourself from special fittings, small rings, wire, threads and feathers.

12. Voluminous necklace

Leather accessories always look expensive and elegant, and if the product is also made with your own hands, it automatically becomes exclusive. Getting a unique necklace is not difficult at all. You just need to cut out several identical petals from leather, give them the desired shape, fasten them together with glue and connect them with a chain.

How to make tassel earrings with your own hands. Extra long tassel earrings with beads will perfectly complement any look - casual, romantic or glamorous!

How to make earrings - tassels with your own hands

WE WILL NEED:

device for making brushes (Clover);
floss threads (AlsLog);
ear wires (Rayher);
beads;
transparent threads for sewing);
beading needles (Rico Design);
scissors.

How to make tassel earrings with your own hands.

Set the desired frame size on the tassel maker. Wrap the floss threads around the frame (20 turns in the photo).
Cut the skein at the top and bottom of the frame by inserting scissors into the special groove.
Fold the frame and make a head on the tassel, tying it with thread at a distance of 1 cm from the top.
Trim the ends of the brush.
Cut off the ends of the dressing threads.
When the desired winding thickness is achieved, tie the threads in the middle.
Using a bead needle with a double transparent thread, pierce the head of the tassel, bring the needle out, tying the ends of the thread in a knot. String the beads.
At the end, fasten the hook to the top bead with a thread. Cut off the ends of the thread. Make the second earring in the same way.

How to make earrings - brushes. Master Class. Video.

DIY tassel earrings. Beautiful cap made of beads and beads. Video

Hello, dear beads!

Tassels have maintained their popularity for more than one season. They can be found everywhere: in cars, on curtains, on bags, and of course in jewelry.

Today I will show you:

How to make tassels from threads with your own hands.

This master class is suitable for beginners who are just starting to work with brushes, as well as for experienced craftsmen as an introduction.

Perhaps some of you will pick up some little tricks and bookmark them!

So, let's go.

The production time for one such brush is about 40 minutes.

It depends on your work speed.

In order to make tassels from threads we need the following materials.

Materials:

Thread for brushes (I use Doli thread, made in India) – 1 spool.
Sewing thread to match the tassel thread.
An unnecessary plastic card or business card (we will wind the thread on it).
Sharp scissors.

Master class on creating tassels from threads.

Step 1.

To begin, take a thread for the brush and wind it onto a plastic card along the width (along the longer part). Look at the photo.

How much to reel?

Here you are not limited, you do it to your taste. The brush in this master class is 300 rpm.

After winding, secure the end of the thread with tape or a tent so that the threads do not unravel.

Step 2.

Now we need to fix the threads. To do this, use knitted sewing thread to tie a thread for the brush in the center.

Why knitted thread?

The knitted thread is rougher, if you can say so about it. It doesn't slip like brush thread. And therefore it will hold the main threads tightly.

Step 3.

We turn the card over and bend it in the opposite direction. So that the arc turns out on the other side.

And carefully, in the center, with sharp scissors, cut the threads.

This is what should happen. Don't be alarmed that the threads are so shaggy. They will be corrected in subsequent steps.

Step 4.

Now let's fix the thread again. To do this, you can already use thread for tassels. Or you can use the same sewing thread.

At this stage there is not much difference.

Step 5.

But still my preference is steam. Hook the tassel on an awl or a long needle or knitting needle (whatever you have), and hold it for 5-10 minutes (depending on the thread) over boiling water.

Many craftswomen hold their brushes over a boiling kettle, but I don’t have enough space there, so I like to straighten the brushes over the saucepan.