home › Tests › Plain and thinning scissors for cutting hair. Simple and thinning scissors - the main differences

Plain and thinning scissors for cutting hair. Simple and thinning scissors - the main differences

There are so many devices in hairdressing! For a successful haircut, the hairdresser must use thinning scissors - thinning will complete the shape of the haircut and ensure ease of styling. After such treatment, daily giving your hair the proper shape will become much easier and faster, additional volume and smoothness of line transitions will appear.

What are thinning scissors

These are special professional hairdressing scissors, which, like regular ones, consist of two parts, with one or both blades made in the form of teeth. Scissors for thinning hair can be single-sided or double-sided - according to the previously described criterion. The thinning side of single-sided scissors can be at the top or bottom, you need to pay attention to this; the location of the blade affects the number of hairs cut.

Scissors vary in the number of teeth. A classic blade can contain from 8 (flag scissors) to 30 teeth; there is a tool containing over 40 teeth. The hair will be thinned in accordance with the width of the gaps. The more teeth, the less “ragged” the cut will be. For beginners, it is better to choose double-sided options with frequent teeth, then the strands will be natural, plus the risk of simply cutting off part of the ends or overdoing it is reduced. Scissors differ in blade length, which is selected according to the size of the master’s hand.

What are they for?

Thinning is needed for thinning hair. When working with the tool, part of the hairs in the strand is shortened, while others remain at their original length, that is, the tip of the strand is thinned out, providing a smoother transition and softer lines in the hairstyle. This way you can make a cascading haircut smooth, with completely imperceptible transitions in length. Thinning is needed in men's haircuts; it is indispensable for bringing a classic haircut with a machine to the ideal, especially regarding the side and occipital areas.

It is better to have two types of tools in stock - with teeth on the top and bottom. The first ones are suitable for soft European-type hair. It is better to apply more aggressive thinning with teeth from below to coarse Asian hair. When the teeth are located below, the number of cut (filed) hairs increases; if the hair is thicker, then the cut area should be larger. The presence of double-sided thinning tools allows for barely noticeable thinning.

How to use thinning scissors

Thinning is the final stage of cutting. First you need to make the base with ordinary scissors and create a shape. Nuances:

It is better to cut with thinning scissors “dry” - after styling with a hairdryer. This way you can clearly see which areas require “lightening”, where the silhouette is heavier.
Correctly thinning hair with thinning scissors is simple - you need to lift the strand with your fingers or a comb and cut the ends.
It is not advisable to file your hair at the roots. This is permissible in a creative haircut, with a certain idea from the hairdresser.
The tool is used for all cutting technologies.

The best thinning scissors

There are countless offers on the professional market for hairdressing tools. There are expensive exclusive models, and there are cheap affordable analogues. Sizes, materials, designs vary. How to navigate this stream of offers and choose the best? Let's look at the most popular famous brands and their tool offerings.

Jaguar

Jaguar was founded in Germany in 1932. The products of this brand are famous for their impeccable quality. Here is one of the popular models:

Model name: Jaguar Kamiyu T33 6.
Price: 28300 rub.
Characteristics: This is a joint Japanese-German development. The scissors contain 33 curved teeth. Material – alloyed cobalt steel. Made in Japan. The length of the canvas is 15.5 cm.
Pros: highest quality, two removable fasteners.
Cons: high price.

In addition to classic thinnings, the company offers creative options:

Model name: JAGUAR S&V4.
Price: 16732 rub.
Characteristics: have an ergonomic shape and glossy polishing. The length of the blade is 14 cm. The asymmetrical position of the different shapes of the teeth gives an unusual effect when thinning hair.
Pros: glossy polished steel, rubberized inserts, removable latches.
Cons: unpredictable effect on different hair types.

Dewal

Simple and affordable, but of high quality – this is how hairdressing tools from Dewal are characterized. They are perfect for beginners or home use. Here is an example of a popular model:

Model name: DEWAL 241/5.5.
Price: 2523 rub.
Characteristics: classic scissors made of alloy steel with a removable holder. 38 teeth, 5.5 inches long.
Pros: reliable design, quality material.
Cons: Right-handed only.

And a more ergonomic option from the manufacturer:

Model name: DEWAL S4055.
Price: 2243 rub.
Features: convection sharpened, black finish, no decorative elements, length - 5.5 inches, 40 teeth, removable stop.
Pros: high-quality stainless steel, high performance characteristics.

Kedake

This is a Japanese manufacturer of professional hairdressing tools. The products are distinguished by high quality materials and reasonable prices. This model is popular:

Model name: KEDAKE 4955-0027.
Price: 5350 rub.
Characteristics: classic shape, removable holder and screw made of yellow steel, size 5.5. The model is made of special heavy-duty steel with symmetrical rings.
Pros: ergonomics and reliability.

There is also a brighter and more elegant analogue from this manufacturer:

Model name: KEDAKE 28455-10030-10.
Price: 7000 rub.
Characteristics: U-shaped working blades, rounded cutting edge, 30 teeth, 20-25% cut of dry hair, high closing smoothness.
Pros: the screw group is decorated with Swarovski crystals.
Cons: non-removable stop.

Zinger

A democratic brand of tools whose products are affordable for many. High-quality scissors can be bought very cheaply:

Model name: ZINGER EV-606-TH/6.5.
Price: 370 rub.
Characteristics: classic scissors shape, plastic handle, non-removable cast stop, size 6.5, second blade with micro-notch.
Pros: affordable price.
Cons: plastic is a short-lived material.

Check out another available piece from the line:

Model name: ZINGER EV-606/6.5.
Price: 320 rub.
Characteristics: classic model with molded stop, straight teeth and screw fastening. Size 6.5.
Pros: light weight, easy to hold.
Cons: non-removable stop.

Kapous Professional

This manufacturer demonstrates the optimal price-quality ratio. One of the most popular samples was the following model:

Model name: 5.5, SK76 KAPOUS PROFESSIONAL.
Price: 1650 rub.
Characteristics: classic thinning one-sided model of scissors, non-removable stop, size 5.5.
Pros: the anatomical shape of the handle facilitates long-term work.
Cons: Not suitable for left-handed people.

The manufacturer is not particularly creative, so the models differ only partially:

Model name: 6.0, SК10T KAPOUS PROFESSIONAL.
Price: 1650 rub.
Characteristics: one-sided model, blade with teeth on the bottom, non-removable stop, handle rings with rubberized inserts, size 6.0.
Pros: comfortable handle shape.
Cons: lack of decorative elements.

How to choose thinning scissors

The choice of thinning is an individual matter. You can buy thinning scissors in an online store, delivery by mail is possible, which is convenient for remote regions. In this case, a working copy can be purchased cheaply if there is a promotion, sale or discount. You can go to a specialized salon and purchase an exclusive, expensive copy of the instrument. This is an excellent option for residents of megacities such as Moscow and St. Petersburg - there are many branded stores here, the cost in such outlets is lower - the purchase will be profitable.

Everyone has their own selection criteria. General points to consider:

Thinning scissors size. The larger the hand, the longer the canvases should be.
The material from which the instrument is made. This may be specialized steel. It's best to avoid plastic.
Number of blades with teeth. Two serrated blades cut fewer hairs during thinning than single-sided thinning.
On which side is the blade with teeth located? The canvas on the bottom is for Asian hair type, the canvas on top is for European hair.
The anatomical shape of the handle will ensure long-term operation without discomfort.
You should definitely check the sharpness of the tool - cut off a strand of hair.
It is better to opt for German or Japanese scissors - these countries are considered the best manufacturers of hairdressing equipment.

Video

Modern hairdressers have many different tools in their arsenal to create stylish, modern hairstyles. One of them is thinning scissors. With their help, hairdressers achieve a variety of results: from reducing volume on too thick curls to creating fullness on thin hair. In what cases is it necessary to use this tool, and when can you do without it?

What are these scissors for?

Almost every professional craftsman regularly uses several types of scissors, including thinning scissors. They are needed not only for thinning ends and reducing volume, but also for creating soft transitions in a haircut and smoothing out rough elements. There is an opinion that thinning scissors damage hair. Many women claim that after using them, their curls become split and frizzy. This effect is indeed possible, but only if the tool is used incorrectly. There are many thinning techniques, each necessary to create a certain effect, it can be said that not a single good modern haircut can be completed without them. Of course, there are cases when the curls are very thin, then straight scissors are used to process the cut. But in order for hair to lie well, be easily styled, be manageable, and maintain its shape and volume, special techniques and tools are needed, and here thinning scissors are simply irreplaceable.

Cutting techniques

The choice of method by which the curls will be cut is very individual. Not only the texture is important, but also the density and silhouette of the hairstyle. The most popular method is when, at the end of the haircut, the hairdresser chooses the same partings that he used to create the shape, and processes the ends of the hair with scissors. But more often than not, different types of tools are needed to create a good hairstyle. For example, the entire haircut is performed with a jagged cut using straight scissors, then they create volume on the top of the head using the “plucking” technique, and thinning scissors are used to create a torn effect on the bangs.

Hair thinning is best done on dry curls, because in this case it is easier to control the process so as not to cut off too much. Many craftsmen perform thinning in the crown area not only at the ends, but also along the length, making several vertical cuts at the roots and in the middle of the strand.

Haircut with thinning scissors

These hairstyles fall into the creative category. You can cut both dry and wet hair. The main advantage of this form is that it turns out to be very plastic and easy to fit and transform into any idea. But not all curls can be cut like this. For example, very coarse hair can become completely unmanageable and begin to stick out in different directions. The same applies to curls and naturally thin hair.

As for men's hairstyles, these scissors are actively used not only to create creative, but also classic hairstyles. A method such as “shading” is necessary in order to create a smooth transition between short and long sections of the haircut. It is performed with thinning scissors, and with high skill - with straight scissors.

How to cut hair with thinning scissors

When cutting hair at home, many people do not know how to use this tool correctly. First of all, you need to pay attention to the frequency of the teeth on the scissors. If they are small and frequent, thinning will be minimal; if they are wide, large areas of hair will be cut off, so you should be careful. The main areas that need to be trimmed in the female form are the crown, temples and bangs. In a men's haircut - the parietal zone, bangs and the transition between short and long hair.

With the help of correctly performed thinning, the hairstyle lies softly, takes the desired shape well and has volume where necessary.

Hairdressing scissors for cutting hair can be divided into two main types -simple (or regular) scissors And thinning.

Simple scissors, in turn, can be: with a standard or convection cutting edge. The standard cutting edge can be micro-notched or smooth. The latter can have different finishes, that is, it can be ordinary or polished. Some comments should be given here to help you understand the meaning of this classification. Of course, thinning scissors should be placed in a separate group and we will talk about them later. The basis for dividing simple shearing scissors into the given classes is the shape of the cutting edge. A standard cutting edge is a clearly visible line of processing (sharpening) of the blade, having a width of about 1 mm.

Convection sharpening is the so-called (Japanese) sharpening, which we will talk about a little below.
A standard cutting edge can be micro-notched or smooth.

The micro-notch can be applied to one blade or both at once. It prevents a strand of hair from slipping along the blade when cutting. Micro-notch shears are typically made from low-carbon steel, which has a relatively high hardness and is susceptible to some moisture. All this ensures a relatively low price.

Experience shows that such scissors are not very durable. Usually, after a year of working with such scissors, and sometimes earlier, wear appears on the inner surface of the blades (that is, as a result of friction, the metal wears out and the cutting edge loses its sharpness), the scissors begin to “crumple” the hair, and they need to be sharpened, which can be done only on special machines, for example in our service center. In addition, the micro-notch does not allow shaving or making a sliding cut, and the stroke of the scissors itself will be more rigid. However, if an accurate cut is important, then these scissors are for you. Many craftsmen who use the “sliding cut” technique prefer to have in their “arsenal” scissors with micro-notches for edging work.

A smooth cutting edge can have a different class of surface finish, which makes it necessary to also divide such scissors into two groups: with a regular or polished edge.

Scissors with a regular edge have an undeniable advantage - while maintaining the consumer properties of good professional scissors, their price is much lower than their “brothers”. The fact is that edge polishing requires additional production costs, which affects the price of the tool. However, it should be taken into account that scissors with well-polished blades are designed for all “slicing” techniques (sliding cuts) without exception, and at the same time guarantee the complete absence of the effect of “squeezing” the hair when cutting. These scissors are made of high-alloy steel, which has increased resistance to corrosion and wear, optimal rigidity and dimensional strength. Scissors with polished blades are, in principle, easy to shave.

An ideal standard cutting edge should have a sharpening angle of 50 ± 2 degrees. If the angle is large, the scissors will “chop” and “break” the hair. You will have to make a lot of unnecessary movements to achieve the desired cut, which is inconvenient. With a decrease in the sharpening angle, the cutting properties, in theory, should improve, but in reality such scissors will become dull very quickly, since the cutting edge will “get jammed” and the scissors will stop cutting.

The convection (from the English “convex” - convex) cutting edge has completely unique properties: its sharpness, combined with the highest quality characteristics of the metal, is achieved by sequential processing of the blades at different angles, and the edge itself gradually fades away and is clearly indistinguishable. This technology makes it possible to reduce the angle to 45° or even 40° compared to the standard edge angle, and therefore improve cutting properties. This is why these scissors are sometimes mistakenly called “self-sharpening.” Most often, a convection cutting edge is called Japanese sharpening, since for the first time it was manufacturers from the “land of the rising sun” who offered hairdressers a tool with such truly unique characteristics. Today, convection edges are made on some of the most expensive models by German and Italian manufacturers. But only Japanese companies offer all (!), without exception, models with this type of sharpening.
The inner surface of the scissors blades can be flat or concave. In foreign literature, a concave surface is usually designated by the English term “hollow ground”. This solution allows you to significantly reduce the friction of the blades during operation. As a result, the blades are pressed against each other only at the cutting point, and not along the entire plane of the blades. The scissors will remain sharp longer than usual, and their action will be noticeably smoother than in models with flat inner sides. The presence of a concave inner surface of scissors is undoubtedly an advantage that increases the consumer properties of a professional tool.

Additionally, some manufacturers of high-quality scissors use a special technology for high-precision fine grinding of concave blades - honing - which further reduces friction and increases the smooth running of the scissors.

If you disassemble the scissors and place the blades on a flat horizontal surface, you can see that the cutting blades have a certain bend in the area of the cutting edges. At the same time, we often hear the question from many hairdressers: “should the scissors have a gap between the blades in the closed position when examining them against the light?” The answer will be unequivocal: “Yes!” High-quality scissors are sure to have such a gap!” This design, like those listed above, ensures that the cutting edges intersect at only one point, thereby reducing friction, increasing the softness of the stroke, and maintaining the sharpness of the scissors for a longer time.

Let us remember that all this affects the increase in the price of the instrument. This means that if you are counting on purchasing a high-quality tool, or the model you like has such characteristics, then you should speak with confidence about a good choice.

Double-sided thinning scissors are often asked by novice hairdressers. The fact is that such scissors cut hair to a slightly lesser extent than single-sided ones. And, therefore, the risk of making an unwanted mistake in your work will be less.

Straight, prism-shaped teeth (when the width of the cutting edge of the tooth is wider than its base) improve the cutting characteristics in which case the remaining hair of the profiled strand gently comes out of the combined blades.

Electrical discharge machining allows you to give the toothed blade almost any shape. Perhaps the most perfect of them (from the point of view of softness of movement) is the form when the line of teeth follows imaginary circles drawn at different distances, with the center in the area of the screw group. Such thinning scissors have the highest cutting characteristics with minimal friction with the cutting edge of the second blade.

In any of these cases, the choice will largely depend on your own preferences for the technique, the desired result, and the level of costs you can afford.
When producing thinning scissors at well-known factories, mandatory output control is carried out by craftsmen only on natural hair.

In the Russian hairdressing school, it is customary that thinning scissors are taken in the hand with the screw towards you, so that the lower blade is smooth and the upper one has teeth. However, you can often find thinning scissors with the blades reversed. This should be attributed to national traditions and technology adopted in different countries. If such scissors are convenient and comfortable for you, then feel free to work and do not pay attention to this difference.

In the production of hairdressing scissors, many factories usually, after the hardening stage, test the hardness of the workpiece material on a special device, which presses a depression in the metal with a diamond tip. The size of this depression and the applied force make it possible to determine the hardness of the material. If the steel is not hard enough, the scissors will be too soft and will quickly become dull. If the hardness exceeds the permissible limits, then the steel will be too brittle and even a slight mechanical impact can lead to breakage of the metal.

In principle, the degree of hardening of the material depends on the quality of the steel from which the workpiece is made, as well as on the future consumer properties that the manufacturer plans to incorporate into the final product. For example, in the German city of Solingen, at most factories it is accepted that the optimal level of hardening is a hardness of at least 55° on the Rockwell scale. This optimally matches the steel composition and edge configuration (usually standard) found in most manufacturers in the region. At the same time, Japanese manufacturers, using higher quality high-alloy steel, provide an optimal level of hardening for it: from 58° to 60° Rockwell, which allows them to create scissors with a convection edge, characterized by higher cutting properties.

Previously, there was a completely unjustified opinion that the classification of scissors was based on the number of hardenings. We can say with complete confidence that the hardening of the metal sheets is performed only once, followed by tempering to reduce the molecular stress of the metal inside. Various technologies can be used to temper steel, the most modern of which is to carry out this process at subzero temperatures, which also ultimately improves the consumer properties of scissors.

One of the most important indicators in the selection of scissors is the tension of the blades (the stroke of the scissors). In Asian countries, it is accepted that the closer the blades are closed to the ends, the greater the force should be applied. This depends primarily on the hair structure of Asian people.

In European countries and here in Russia, it is customary that the entire stroke of the blades from the screw to the tips should be smooth and easy. When purchasing scissors and during further use, you need to pay special attention to this. If the stroke has a dip, especially at the tips, then your instrument is not in order.

I have had to deal with cases when, when choosing scissors, the hairdresser opens them and, taking them by the two ends, checks for play in the screw group. This approach to new scissors 9 (with the screw correctly adjusted) is fundamentally wrong. The fact is that the canvases are already given a curved shape during manufacturing, and the heel of the canvas is processed at a certain angle, that is, with a bevel. By opening the scissors, you thus free all points of contact between the blades, leaving only one screw in use. Naturally, a slight backlash, in this case, should be present. Therefore, this method of verification cannot in any way serve as a criterion for assessing the quality of scissors.

The tension of the blades is determined by the state of tension of the screw or screw group. (The difference lies in the design of specific models). Take the scissors by the ring, set them vertically, with the other hand move the second ring approximately 80° up (Fig. 11) and release.

The optimal state of screw tightening is when the blades close under their own weight in such a way that the distance between the point of closure and the screw is 1\2 - 2\3 of the length of the blade (Fig. 12)

If the blades remain in almost the same position (less than 1/3 of the blade), then the screw of the scissors will be overtightened and it will be difficult to work with them. With a busy work schedule, this will lead to rapid fatigue, reduced performance, and decreased productivity. Ultimately, it's about your health.

We often have to deal with the fact that the ends of the scissors completely close under their own weight during such a check. Of course, such scissors seem to have an easy move. However, strictly speaking, this is also wrong. Turn the scissors over into a horizontal plane, grab them by the rings, and you will see how the cutting edges “walk” relative to each other, you will see what significant play exists between the blades due to a decrease in the tightening degree of the screw. When working with such a tool, the cutting edges become dull much faster, and wear appears on the inside of the blades, the cut is not clear enough, and the scissors begin to “break” the hair. This can be seen from the proposed illustration (Figure 13).

Therefore, if your scissors have insufficient blade tension, then hurry up to slightly tighten the screw (or screw group) to the level shown in Figure 12.

Recently, all leading scissor manufacturers have been paying great attention to the design of the screw group. With high-quality scissors, this is no longer just a screw, but a complex mechanism, with springs, bearings, special gaskets, etc. This system will allow you not only to adjust the tension of the blades and improve the quality of the cut, but also to “tune” the scissors to work with any hair structure.

It is optimal when the scissors have a rest for the little finger - it is necessary for balance, since when the little finger hangs in the air, the scissors begin to “walk”.

The size of fingers is different for all people, taking this into account, rubber inserts are installed in the rings of the scissors - for a perfect fit of the scissors to the hand. In addition, such inserts increase the area of contact of the fingers with the scissors, and therefore make the work of the master easier.

After you have chosen the size and configuration of the scissors, you need to take them in your hand and make a few movements. It is ideal when the hand seems to merge with the scissors. When cutting a strand, you feel how they cut every hair.

Usually, when sharpening, the scissors are disassembled, and each blade is independently sharpened and brought to the point that it can be used for shaving. However, after assembly, it may turn out that the scissors do not cut. As a rule, this result occurs if the scissors are dropped. The thing is that during production the canvases are subjected to strong mechanical and thermal influences. The new scissors are, of course, very good. But as soon as they fall, problems arise. It is well known that metal has a “memory”: when struck, sheets can bend and take the shape of blanks (Fig. 14).

Try to easily close the blades - if there is no uniform convergence, dips and burrs appear, hurry up and contact a specialist.

Lubrication is of great importance to the operation of the screw group. Each manufacturer has its own criteria and its own approaches to lubrication of scissors. Thus, it is recommended to lubricate Jaguar and DOVO scissors once a month. “TONDEO” - once a week, “KASHO” - once a quarter (and when using a special pencil - somewhat more often). But in any case, it is necessary to use only the oil recommended by the manufacturer. If spindle oil can still be accepted (with a high degree of doubt) for lubricating cheap scissors, then the use of such oil for expensive scissors is simply unacceptable! The fact is that ordinary oils (due to special additives) tend to absorb various oxides and friction products of metals. (Remember how car oil turns black after a certain mileage. Everything that was superfluous in the engine dissolved in the oil!). Special oils for scissors, on the contrary, displace friction products and the smallest particles of hair, leaving the contact areas of the blades clean.

When lubricating scissors (Fig. 15), oil must be applied not only to the screw group (one drop on both sides), but also to the heels of both blades, which are located behind the screw (towards the rings) and are subject to light loads.

For a hairdresser, one of the main tools is scissors. Currently, manufacturers produce a variety of models, but choosing a quality tool for hairdressers is not as easy as it seems at first glance.

Tool selection:

1. Material

The classic version of scissors is made from (the higher the carbon content, the better the tool can be hardened). The HRC mark can be seen on the packaging, which indicates the hardness level, which varies from 58 to 62 on the Rockwell scale. If the level is above 62, then you should not purchase such scissors, as they will be fragile. The tool may also have an additional chrome or titanium coating, which is hypoallergenic and wear-resistant.

2. Sharpening the blade

The sharpness of the scissors depends on the sharpening angle (the smaller it is, the sharper the device). The standard sharpening angle for scissors is 40 - 50 degrees.

3. Smooth operation when using

A good tool should close easily without the use of force. They should be comfortable (when a specialist works with scissors for a long time without feeling tired in his hands) and comfortable when used by a specialist. To achieve this goal, manufacturers have created models with handles of various shapes (symmetrical, semi-symmetrical - and offset). There are also scissors that have a little finger rest, which can be removable or fixed (it allows the hairdresser to spend less effort during the work). Each hairdresser chooses a form for himself in accordance with his preferences.

Professional hairdressing scissors come in different lengths (measured in inches). The standard length of scissors is 5 - 5.5 inches. An important condition is to select scissors according to the length of your fingers. For a specialist with extensive work experience, having one tool is not enough; it is important to have different types. For example, these could be thinning scissors - with a classic blade length.

5. Thinning scissors

Thinning scissors can be different: single-sided or double-sided; they can differ in shape (prismatic, with sparse teeth) and the width of the teeth, as well as their number. For example, different widths will help the hairdresser create or add volume to the hair. Thinning scissors also have a second name - flag scissors.

6. Manufacturing company

Currently, there are a huge number of manufacturers of hairdressing tools. But Japanese scissors are especially popular, especially in England, Scandinavia, and Russia, since this country has strict quality requirements due to the structure of the hair of the local residents (they have it hard and thick). Scissors made in Japan are interesting in their design, have a serial number and manufacturer's information. If the tool packaging says “Japanese steel”, it means they were made in another country, but using the specified steel.

7. Cost

Professional scissors, including scissors, are expensive because they are made using manual labor. The approximate cost ranges from $150 and up. The variety of blades has led to the division of the tool into straight (the scissors have a micro-notch that prevents sliding along the hair) and thinning scissors. Most often, models with micro-notches are used for men's haircuts.

Instrument care

We must not forget about proper care of the hairdresser’s main tool.

Scissors must be clean and dry.

After each haircut, you need to clean them of any remaining hair.

Buy special oil to lubricate scissors.

Never adjust scissors with open blades.

Once every 6 months, consult a specialist who will help you monitor the condition of the scissors.

Features of thinning bangs at home with scissors and a razor.

The attitude of girls towards bangs is ambiguous. Most representatives of the fair sex alternate between growing bangs and cutting them off. With the help of bangs, you can add expressiveness to your hair and highlight your facial features. In this article we will tell you why and how to carry out thinning correctly.

Thinning – thinning out a certain part of the hair to give the hairstyle a model look and style. Initially, thinning is indicated for the fair sex, who have very thick and lush hair. At the same time, thinning allows you to simplify styling and reduce hairstyle time. Such torn pieces frame the face more softly and smooth out its unevenness.

There are several options for thinning scissors. In general, this is a professional hairdressing tool, which is distinguished by the presence of teeth on one or two blades. Moreover, if the teeth are located on one blade, then much more hair is cut. This is why it is better for novice craftsmen to use a tool with serrations on two blades. The hairstyle will differ significantly when thinned with scissors with different numbers of teeth. The photo below shows options for thinning scissors.

If you have such a tool, then you can thin out your bangs yourself, but before you do this, think about what result you want to get.

Thinning options:

Tips. This option is ideal for short bangs. The purpose of this thinning is to make the cut line jagged and improve styling.
From the middle. Makes bangs sparser and is suitable for girls who want to make their look more expressive and deep.
Along the hairline. In this case, thinning is carried out once at the very roots. This allows you to make bangs playful and quite rare.

Instructions:

For any thinning, the curls are moistened and combed with a comb to straighten
After this, the bangs are raised and, if desired, thinning is carried out at the roots or at the ends
Next, the cut hair is combed out

You can also thin with regular scissors. Several techniques are used for this. They are also used by professional hairdressers when they want to give their hair some negligence and asymmetricity.

Thinning options with regular scissors:

Twisted tourniquet. You need to divide the bangs into 3 equal parts and pin them together. The bangs are pre-moistened. After this, each strand is twisted into a bundle and thin strands are cut off in several places. Do the same with the rest of the strands.
Fringe. It is necessary to divide the bangs into 3-5 equal strands and pin them with ducks, after moistening them. Now grab a strand of hair along the hairline with your fingers and pull it up. Use sharp scissors to separate pieces of hair at equal distances from each other. Repeat the manipulation with other strands.
Teeth. With this thinning, small strands are separated and simply cut at a distance of 0.5-1.5 cm from the roots.

This thinning method is called scraping and is used by experienced craftsmen. If you are not good with scissors, we do not recommend picking up a razor. It requires high precision movements.

Instructions:

By scraping. The bangs, separated by zones, are cut with a razor, moving towards the ends to the comb.
Poynting(haircut “on fingers”). The strands are cut pointwise to 1-2 mm with a razor.
Twisted strand method. The bangs are divided into strands, they are twisted into strands and milled from the middle with a razor using a blunt cut (at a right angle) or scraping.

It all depends on your skill and desire. In reality, everything is not as simple as it seems. It is enough to study this issue a little and everything will become clear.

Adviсe:

It is best to purchase thinning scissors with serrated teeth on two blades. This way, you will have the opportunity to cut hair without worrying about distance and indentation.
If you don't have thinning scissors, use the strand method. The easiest way is to thin with a razor along the rope using the sliding method.
If you are not yet very confident in holding scissors in your hands, then use serrated thinning. You just need to cut the strands at an equal distance from each other.

How to profile and thin out side bangs at home yourself: instructions, tips

The main feature of oblique bangs is a beautiful and playful cut. In this case, the angle of curvature is selected by the master. The most interesting thing is that the cut can be made either along a straight line or a wavy one. Thinning of such bangs is carried out to give the image a flirtatious look and to simplify styling. You can watch the video about thinning oblique bangs.

VIDEO: Thinning oblique bangs

Elongated bangs are considered to be bangs that are located along the eyebrow line or below it. Nowadays similar bangs can be seen on Hollywood stars. The main feature of bangs is the different cut options. It can be flat, oblique or wavy. To evenly file your bangs, it is best to use a razor or straight scissors rather than thinning scissors.

Instructions:

If the bangs are long and straight, then thinning is carried out with thinning scissors from the middle of the bangs growth or when departing from the roots by 1.5-2 cm.
If the bangs are oblique or arched, then thinning is carried out by dividing the bangs into small sections. In this case, you can mill with straight scissors according to the principle of twisting a rope. In this case, there should be 5-7 bundles. This will ensure uniform thinning.
You can thin it out with a razor. To do this, again divide the section of hair into 5 strands and run the razor along the twisted strand.