home › Children › A simple DIY nylon ribbon bow. How to make a ribbon bow for a regular hairpin? From paper tape

A simple DIY nylon ribbon bow. How to make a ribbon bow for a regular hairpin? From paper tape

Today you can find a wide variety of hairpins, bows and hair ties. Agree, girls with bows look very elegant and elegant. You can make a beautiful bow yourself. This process will not take much of your time, and all the necessary materials, as a rule, can always be found at home. So, let's make a beautiful ribbon bow together with our own hands.

DIY ribbon bows: step-by-step instructions

Bows can be made from various materials, for example, from satin, nylon or grosgrain ribbons. Let's look at how to make a bow from a satin ribbon.

Necessary materials:

satin ribbons of any color (5 and 2.5 cm wide);
silver satin ribbon (0.3-0.4 cm wide);
felt circle;
flower for decoration;
threads, needle;
glue gun;
rubber;
scissors.

Stages of work:

Take a satin ribbon 5 cm wide and cut it into 6 pieces (each should be 14 cm long).
The resulting pieces should be folded in half and gathered onto a double thread, making a strong knot at its end.
We have petals that need to be connected into a flower and secured with thread.
Now the same actions need to be done with a satin ribbon 2.5 cm wide. Thus, we have two flowers: large and small.
You need to glue a felt circle to the large flower on the back side to make our bow stronger. This can be done using a glue gun.
We cut the silver ribbon into six pieces 15 cm long, fold them into ears and glue the ends together, as shown in the photo.
Now we cut the silver ribbon into six pieces 8 cm long and also make ears out of them.
All the preparatory work has been completed, it's time to assemble our bow. To do this, you need to glue 15 cm long ears onto a large bow using a glue gun.
Glue a small bow on top.
You need to glue the remaining ears onto the small bow. To make our bow look impressive, you need to attach any small decoration, for example, a heart, to the middle of the resulting flower.
The last thing we need to do is glue the hairpin. And our satin ribbon bow is ready!

DIY nylon ribbon bows: master class

DIY bows made from nylon ribbons look original and beautiful.

Necessary materials:

nylon tape 8 cm wide;
45 cm satin ribbons 5 cm wide;
simple hair elastic;
nylon braid – 40 cm;
threads;
needle;
glue gun

Stages of work:

We make beautiful bows from grosgrain ribbons with our own hands

We have learned how to make bows from satin and nylon, now we will try to create an original hair decoration from grosgrain ribbon. We will look at the easiest and fastest way to create a bow.

Necessary materials:

grosgrain ribbons 20 mm wide and 12 cm long – 2 pcs.;
threads;
needle;
rubber.

Stages of work:

DIY ribbon bow: master class

There are a lot of options for making bows from grosgrain ribbons. So, if you want your product to be more lush and colorful, combine bows made of satin and grosgrain ribbon. In this case, you need to take a satin bow as a basis, and attach a rep bow on top of it. You can also decorate such a bow with braid and make a center for it. Moreover, we already know how to do this.

We learned how to make bows from different ribbons with our own hands, now you can safely fantasize and try to create your own masterpieces. By the way, such bows are used as decoration not only for hair, but also for gift wrapping. I wish you creative success!

In needlework, it is impossible to do without making amazing crafts. To make them, they use elastic bands, flowers, a large and wide satin bow, etc. Ribbon bows are something that you can easily make with your own hands. These lush school ribbons made of nylon fabric will definitely decorate the hairstyles of young fashionistas.

Ribbon bows are something you can easily make with your own hands.

Sometimes the most beautiful things are the simplest ones. A voluminous bow made of satin ribbons is very easy to make, the main thing is to follow the instructions or look at MK.

Step-by-step instruction:

You need to prepare materials: tape, glue, wire and scissors. Even though there is no paperwork involved, the use of scissors is a must. The use of wire is not necessary.
After selecting the ribbons, they should be cut. Thin ribbons will not make a beautiful bow hairpin. You shouldn't cut it too much; the tape should be long enough. It is recommended to make a cut “with a margin” so that, if necessary, you can adjust the shape of the product.
Now the material needs to be placed on a flat surface and both edges should be pulled towards the middle. They overlap each other so that you get 2 loops and a tail.
After this, the proportions of the bow need to be adjusted. It is important that at this stage the workpiece is symmetrical.
Then the left loop is folded towards the right loop. A hole is formed in the center of the workpiece; the material must be turned out through it.

At the last stage, the bow is tightened tightly.

Gallery: new and unusual ribbon bows (25 photos)

Cute DIY ribbon bows (video)

How to make a bow from ribbons or braid using the kanzashi technique

A kanzashi bow for a girl is easy to make even for beginner crafters.

Master class step by step:

For such work you will need not only tape, but also wire. Work begins by cutting the required amount of tape and laying it out on a flat surface.
Then 2 loops are formed from the material. The two ends of the ribbon are folded in the middle, overlapping each other. To prevent the workpiece from falling apart, hold the center with your finger.
After this you can use the wire. You need to wrap it around the center of the bow. This needs to be done very tightly. To camouflage the wire, wrap a thin strip of tape around the center.
Now a similar preparation is being made. The sequence of actions is the same.

A kanzashi bow is easy to make even for beginner crafters

The kanzashi bow is lush. Therefore, in order to achieve such a volume, you need to put a second one on top of the first blank. The blanks are fastened with wire.

School bow made of nylon ribbons: master class

It’s unrealistic to imagine a schoolgirl going to September 1st without a bow. But why buy such a thing when you can make it yourself?

So, the scheme of work:

The work begins by cutting the nylon tape into 4 pieces. Using a lighter, burn the ends of the segments.
Take one piece of material and gather it onto a thread in the center. There is no need to make too large stitches, 0.5 cm is enough. Now the product is pulled together, forming a rosette. This will be the pinnacle of the work.
The second piece of material is folded in half along its fold. Thread stitching is being done. The product is tightened.
To decorate the bow, you can use, in addition to nylon, satin ribbon. It should be used to decorate the rose bow from the center, making small loops. The satin material is secured to the nylon with thread stitches.
All ends of the tapes must be melted. At this stage, the middle part of the work is ready.
A piece of nylon thread is folded in half, and then the part of the material that is on top falls down a little. The shape is fixed with threads. It turns out to be a bow. It needs to be sewn onto the previous workpiece. The double bow for school is ready.

How to make a beautiful little bow from narrow satin ribbons?

Small bows are convenient to use as hairpins.

The work includes the following stages:

To make such work you will need not only tape, but also fabric. It should be thin enough. The color of the fabric is delicate, bed-like, for example, light pink or beige.
You need to think about how the bow will be fixed to the hair. For these purposes, you can use a hairpin.
The ribbon is placed on a flat surface. It is necessary to form a standard bow in the form of a butterfly from it. To do this, the ends of the material are folded inward.
In the middle, the work must be tied with wire or thread. To disguise the fastening, you need to cut a thin strip of the same material and tie it around the center of the butterfly.

Small bows are convenient to use as hairpins

The last step is to attach the butterfly bow to the hairpin. Now you can wear it on your hair. The beautiful decoration is ready.

How to choose a ribbon to create a bow?

First you need to determine what the bow is for. For example, if a craftswoman wants to make it for her first-grader daughter, then preference should be given to nylon material.
The choice in favor of a particular tape should be made based on its quality. You should not save on such material, because to make the product look beautiful and presentable, you should buy high-quality ribbons.
Beginners are not recommended to use satin material in this work. Why? It's all about its slipperiness; it will be inconvenient for an inexperienced master to work with it.
If a young fashionista wants to make a bow decoration for her hair, she can look for a ribbon with a pattern. This item can be made as an accessory for a dress. For example, polka dot or striped ribbons are available for sale.
If you need a ribbon to decorate gift wrapping, then you can find a material with wire on the edges. Using this tape is very convenient. With this material, the gift wrapping will be decorated in the best possible way.
Don't be afraid to experiment! This rule is universal even for beginners. Don’t be afraid to use multi-colored materials, as well as materials of different quality, to create a bow. Each master is his own stylist.

All knots that the master makes while working on creating a bow must be very tight. It is important to remember the following: if the craftswoman was able to tie a tight knot, then she can tie a bow from it by hand.
Auxiliary materials such as wire and thread should be used when the material is not dense enough. Otherwise, there is no point in using them, since the product will fix itself perfectly.
You should always cut the ribbon with a margin. For example, if to create a bow you need material 20 cm in length, then it costs 25 cm to cut. These seemingly extra 5 cm are necessary to adjust the shape of the product.
If glue is used in the work, then you can move on to the next stage only when it is completely dry.
There are times when the glue, even after drying, is visible on the material. To disguise it, you should tie the place with threads or a small piece of ribbon of the same color as the bow.

Those who have difficulty tying bows are recommended to use special devices for this. This will make the task much easier for an inexperienced master.

Today, bows are becoming an ideal decoration for the holiday table. However, the appearance remains unchanged when you need something individual for your hair. This accessory is also used to decorate gifts. Every girl has various tricks up her sleeve to make the holiday more festive and look more elegant at the same time.

If the question arises about how to make a beautiful bow with your own hands, then if you have the housewife’s little arsenal of tricks, this is quite easy to implement.

Paper or ribbon bow

You can make such decorations in various ways, you just need to be smart. They are realized using all kinds of materials, but the most popular are paper and tape.

Technology or how to make a paper bow for a gift:

cut thick paper into strips;
each piece should be a different length;
fold the segments without distorting them;
it is necessary to make six large “eights”, three small ones;
leave one figure, straight, as it will serve as a border ribbon for the “eights”;
Each resulting figure is crossed, and in the middle the straight mold left for the border is secured with glue.

To understand the process of the action algorithm, there are photos of ready-made bows and at the implementation stage.

There is another option for creating a similar decoration:

Various shapes are cut out of colored paper;
drawings will be an additional touch;
is implemented according to the previous principle, only by immediately gluing them together and tying them with a straight strip;
At the bottom of the bow you can cut out paper in the shape of a triangle.

Tape technology

If you need a voluminous, lush bow for a gift, then you can use the following instructions:

the material used will be a fairly dense tape;
then it is folded into several rings to create the desired size and volume;
the loops are smoothed out;
corners are cut off;
straighten, then roll into rectangles in the center;
the middle is fastened with another tape, stapler, wire;
after this, the loops need to be turned on different sides;
adjust the rings.

Classic decor ideas

You can also use traditional decorations for gifts:

Butterfly. The ribbon is divided into equal halves and crossed with each other. The loops alternately go down and then up. Then you need to pull the decoration together in the middle.

Strict. Two ribbons are cut, smaller and larger. The long one is used as the main blank itself; its edges are dipped in glue and both sides are glued together. The other is grabbed in the middle, at the gluing site.

A simple ribbon bow can be made with two crossed figure eights. These figures are held together. The highlight can be various beads. Simple decorations are created from thin ribbons.

Multilayer. This type is carried out with three ribbons of different lengths and widths. If desired, they can differ in tone palette. The widest one will be at the bottom, and the narrowest one at the top. The ends are trimmed with a corner and left stretched so that the product can be attached to the packaging. Another piece will be needed to tie the three layers together.

Double layer. To do this, you will need two segments: one wide, the other narrow. They are also connected with a ribbon in the middle. The tips of the primary figures are fastened to each other.

Lush compositions

Mostly chic, voluminous bows are made to decorate the appearance. Not so long ago, hair decor was in fashion, and most girls today are wondering how to properly make a bow for their heads.

A lush composition is made as follows:

the length and width of the material are chosen based on the final intended result;
a two-meter tape is folded like an accordion;
in the middle the accessory is tied with a nylon thread, the ends are torn off so that it is convenient to attach to the hair;
in addition, decorative elements or other colors of fabric are glued together, only in a different color.
additional touches are also bandaged.

There is another way to make a lush head accessory made of fabric:

material of two meters, cut into 20 cm;
fold in half;
the wrong side will turn out;
in a folded line, it is necessary to glue the fabric;
the product is turned inside out after the glue dries;
the tips are folded;
then they are stitched with thread;
sewn to the base;
You can decorate the accessory with beads, rhinestones, beads.

Satin, floral bow options

Technology of how to make a bow from a satin ribbon:

the material is folded several times in a figure eight;
fixed in the middle;
the coils are fluffy;
the ends are trimmed or burned.

To implement the planned accessory, in any case, a certain set of tools and materials is required. In most situations, it is better to stock up on fabric more than two meters long and twenty centimeters wide.

The master class on how to make a bow with your own hands indicates a clear sequence of actions. Only tools are taken as a basis, the algorithm is always different, because there is fantasy at the head of the rules.

For example, an attribute in the form of a flower can be made like this:

one tape is fastened with the ends inward, creating loops;
having retreated a little space, continue the same actions until it becomes magnificent;
The base is bandaged with a thin cloth, sometimes a stapler and glue are used;
then straighten the product.

Or it can be implemented in another way, where the sequence will be similar, but at the same time, the ribbons are cut in the area of the loops. Today, ideas and instructions on how to make a bow are often Western.

A common option is the following:

a thin ribbon from which figure eights are made;
some parts are fastened in two pieces;
a base of several ribbons connected in the middle, while being straight;
edges jagged;
two parts are assembled, beads and rhinestones are placed on top.

There are other ways to implement the accessory. It looks especially unique and interesting on New Year trees, Christmas and other wonderful holidays.

Photos of DIY bows

Good day, my dear friends! When the time for the holidays approaches (especially last bells and September 1), an item such as a ribbon bow becomes especially relevant. This accessory is so popular among schoolchildren, mothers and just needlewomen that I couldn’t ignore it and decided to devote an entire post to bows.

Various kinds of bows are actually found in our lives so often that we don’t even notice it - in jewelry, clothes, even used as an element of a school uniform... In general, if you want to learn how to make bows from a variety of types of ribbons, then welcome !

Beautiful DIY ribbon bows: master classes

In fact, learning how to tie even the most complex bows yourself is not that difficult. Instructions with a large number of photos, which I have prepared for you today in abundance, will help with this. There will be both selections from the Internet and unique master classes specially prepared for you.

How to make satin ribbon bows: step-by-step instructions

Satin ribbons are the most popular material for creating small masterpieces. Smooth, shiny, relatively inexpensive ribbons have always attracted the attention of needlewomen from all over the world. The material has found application in a variety of creative fields, not with the exception of steel and decorations based on various types of bows.

To create accessories, you can use ribbons of different widths, but it all depends on the chosen design and execution technique. Let's start with the simplest types.

The simplest classic bow

The basic bow that any beginner should learn to make is presented below. For it, you can take either a narrow or a very wide ribbon - it will work from any one.

Work process:

Fold the ribbon by placing the two halves over the index fingers of both hands.
Cross the halves and insert one into the other.
Tighten the product. Ready!

You can make a chic decoration based on such a bow. It will be enough just to fill it with waterproof glue or shiny acrylic varnish, then attach the rings to which the chain will be fastened.

The same bow will not be difficult to tie on a fork; with its help it will turn out more neat and even (although you can create a very beautiful accessory on your fingers). There is also a limitation for such an “assistant” - it is useful only when creating very small bows; for larger products you will have to resort to the traditional method.

Double tape

The double bow is made in a slightly different way from the previous one. For it, two rings made of tape and a separately created center, obtained by sealing the edges, are useful.

Fold the two rings in the middle and sew or glue them so that their sides touch. After this, the middle is closed with a pre-made part. The design can be attached to a hairpin or elastic band.

Note!

For this accessory, you need to take a medium or wide ribbon; such beauty will not come out of a thin, narrow material. If your choice goes to a width of 2.5-5 cm, then this will be the ideal solution.

A variation of such a bow of two ribbons can be this analogue: in this case, two rings are superimposed with their centers on top of each other. You can also experiment with colors - for example, create a red or green bow, or even combine one or more shades in one product.

Try to make more than two layers, take ribbons of different widths and textures. Thus, from one pattern for creating a bow, you can create a wide variety of accessories.

Multi-layered puffy bow

A great option for schoolgirls and more. This bow can easily be placed on a hairpin or comb to attach to your hair. It is based on the two simple bows discussed earlier.

To fold one, you'll need to make a base of two overlapping layers. The ribbons folded in this way will form the back part. The front one is similar to the simplest first bow. At the end they need to be connected using glue or thread. Everything is held together by a central piece.

This way you can get more voluminous accessories, like the white bow shown below. There is one difference here - the basis is not two layers, but three.

Romantic and sophisticated, this addition to the image will delight any graduate who wants to indulge in nostalgia. But this option, unlike jewelry for girls, is more mature and feminine, which is exactly what is needed in such cases.

Twisted bow of 3-4 ribbons

A very beautiful bow that is well suited for head decoration. To do this, three or four (or even more) pieces of ribbon of the same width but different lengths need to be sewn together with an infinity sign and placed one inside the other. Design the middle as in a few microns earlier.

Kanzashi

Many beautiful bows are made using the kanzashi technique. This type of creativity came, as you might guess, from distant Japan. In this way, they create magnificent details to complement not only everyday, but also festive outfits.

Bow flower

Making such a flower is not difficult, but painstaking. You will need at least 12 petals, which will need to be pre-cut from a ribbon 2 and 4 cm wide (you can take a different width, but not less than 1.5 cm).

First make the first layer by stringing six wide petals and pulling them together. Place some decoration between the layers and attach the second layer made in the same way. Don't forget the bead in the middle.

Another variation of simple but beautiful petals is located below. Here the flowers come out more pointed.

A more graceful white flower is created below. In the step-by-step photos you can see that the petals for the flower are made by twisting the ends into the middle. Such a bow can consist of either a pair or five or six layers, gradually increasing in the number of elements.

Bow for discharge from the hospital

Newborns (and children in general) deserve the best! That's why I found for you a beautiful bow that will suit both girls and boys. For this you will need a fairly long ribbon (at least three meters).

In the middle, make a winding of several layers and then a knot as in the photo. After this, you will need to pull out several petals formed by the previously folded rings.

Why leave such long ends around the edges? The fact is that you will need to tie them around the long-awaited package, leaving a beautiful middle in front. At one time, I actually bought a five-meter ribbon - the nurse tied it into such beauty that we still remember it with a smile with the whole family.

How to tie a bow from grosgrain ribbon

The good thing about grosgrain ribbon is that, unlike satin, it is less susceptible to various types of damage. The satin one only needs to be hooked once and that’s it – the appearance of the bow is ruined. This trick won’t work with reps, but it also costs more.

Baby bows

The combination of several types of ribbons looks very interesting. In this case, colors are also combined, which, nevertheless, look very organic. The polka dot ribbon is just perfect! Such a bow will decorate a girl’s head for a holiday and in everyday life. For it you will need to connect two folded parts, as was seen earlier in master classes. The top will be decorated with a classic variation.

With elastic band

Assembling a lush bow with an elastic band is not difficult. To do this you will need several layers of bows, decorated as we did earlier. The number of layers is limited only by your imagination and common sense. The difference between this accessory is that underneath it there is a kind of cross with serifs at the ends.

You can connect all this splendor with ribbons 1 cm wide, tying the middle. You can attach the bow to the elastic using a glue gun or something similar.

A bright bow with a school theme explodes early ideas about what a school accessory should be. It's just a bomb!

Butterfly bow

You can even make something like a tie using grosgrain ribbons! Yes, the butterfly will be small, but very impressive. To create it, fold the ribbon, tucking the edges under each other, as in the photo below. You will need three such layers. Attach a longer ribbon underneath so that you can tie it at the back. In MK it is quite short, in this form it can be left for a simple accessory.

Here's another fun variation of the bow tie. Here we use nothing less than bird feathers, connected with a ribbon in the middle. Interesting interpretation of the standard butterfly, isn't it?

By the way, a butterfly bow can also be made from fabric; a master class on this is below.

Bows for gift boxes

To tie a bow on a gift box you will need not only ribbon, but also different types of wrapping paper.

Big bow

A very large accessory for a very large gift. Such a bow can be made from ribbon, but it is better to use wrapping paper, which will take a lot to make such a creation.

Place a small box at the base of the decorative element. There may be a surprise in it or it may just be the basis for such an accessory. Place it in the center of the square, which is covered with its edges at the top and bottom. Fold the free edges as in the photo below (as if you were wrapping an envelope). Press the middle and wrap it with a small piece of paper of sufficient length. Spread the edges to make them as fluffy as possible.

This bow can be used as an independent package or as a decorative part for a huge surprise.

Beautiful for a gift

This next puffy bow has an incredible Christmas feel to it. He literally reeks of them! For this you will need to fold the ribbon as shown below, overlapping and tying several layers together.

Place several bows on top of the design, folded as shown below. Decorate the middle with a beautiful bear in a cap or any other decorative element.

Paper bows: simple, cheap, original. All master classes describe their creation in great detail.

Do you want even more bows for a gift? Read about this in another article.

Nylon bows

Nylon ribbon is traditionally used for graduation and hair decoration. But such bows can also be used for other purposes.

A simple bow on a fork is created in just a couple of minutes. To do this, you take a fork, thread a thin ribbon in the middle, and a thicker one on top. Wrap the thicker tape around the tines of the fork many times, forming a braid. A thinner ribbon becomes the central part of such a flower.

A semicircular metal template will help you “cut” the petals using a small resemblance to a soldering iron. To do this, two ribbons - nylon and satin - must be folded as shown below. After this, the middle is bent inward and you will need a lot of such petals. They merge into one layer, then into another, etc., until you get a lush multi-layered bow that can be used to decorate your hair.

In the next accessory, nylon tape is used only as an additional accessory, decorating a base made of fabric. You can create such beauty in a few minutes, and decorated with nylon ribbon it will look even richer.

The next bow belongs to the gift category, but I decided to put it in this section because it is made of nylon ribbon. For it, you will need to fold the tape in many layers, and make a cut in the middle, which will need to be tied with a thin fishing line, around which the ends will be tied. Now comes the most important stage: you need to pull out all the ends of the folded ribbon to get a very fluffy structure.

This bow will decorate a Christmas tree or simply decorate your apartment.

A similar accessory can be made from thicker tape and even burlap. Pulling out the ends will be more difficult, but the effect will be more unexpected and extraordinary.

Photos of other beautiful bows

How can they not register them! In the form of elegant brooches, bracelets and much more. For example, the accessory below will be an interesting addition to a holiday outfit.

Another lace bow with a bead inside.

In general, thanks to lace, even the simplest design begins to look more original and festive.

Just look how you can decorate your handle by adding several layers of lace and satin ribbons.

A bow on the headband will turn an ordinary girl into a doll hurrying to the ball.

Roses as bows. Wonderful, isn't it?

The bow on the dress looks very impressive and original.

Sincerely, Anastasia Skoracheva

Here's a photo showing a variety of techniques for creating simple handmade ribbon bows.

How to make a simple bow?

You can make the simplest bow yourself as follows:

Before starting work, prepare two ribbons (wide and narrow) of different colors. The length and width of the light tape is 20x5cm, dark - 40x5cm, respectively.
Next, fold the wide ribbon into a loop and secure the edges with glue.
Repeat the same with a narrow ribbon. To do this, you need to put it on top of the wide one, and fasten the ends of both with glue to each other.
Take the remaining piece of narrow ribbon and tie it loosely in the middle of the resulting product.
Free edges allow you to attach a bow to a gift or clothing

How to make a lush bow from ribbon

There are many variations on this theme. Here is one simple way to make a satin bow at home:

Purchase a ribbon of the required length and width from the store. The longer it is, the more magnificent the product will be.
Fold the ribbon like an accordion and tie the part in the middle with thread.
To make a large satin ribbon bow, use several of these elements connected to each other.

It’s easy to create a beautiful bow for kindergarten or for September 1st for first-graders using a two-meter white ribbon.

To do this, perform the following steps:

Prepare several segments of equal length (15cm).
Place them right side inward.
Glue is applied at a distance of 2 cm from the bend.
The gluing area is pressed with tweezers for strength.
After the glue has dried, the bows can be turned outward.
The edges are fastened with thread and sewn to the base (felt, cloth).
Rhinestones and beads are suitable as additional decoration.

Wide ribbon bows

Often, when choosing a bow tie, difficulties arise, since the store does not always have the model in the desired color.

A worthy solution to this problem would be to make such a tie from scrap materials. Here's a quick guide:

Prepare 2 pieces of tape of different lengths and widths: the first – 20x5, the second – 18x3
Fold each one in half, securing the ends with glue.
For strong bonding, it is recommended to use a needle
Connect both parts using stitches
Pull the thread and fasten

The original decoration is considered to be “roses” - beautiful DIY bows.

Creation proceeds according to the following scheme:

Wrap the ribbon around your hand and make a knot
Spread the “petals”, bending them inward
Repeat the action with each “petal”

Narrow satin ribbon bow

The Dior decorative element will add sophistication and charm to your clothes. Making a kind of bow is not difficult:

Cut elements of varying lengths from tape
Make figure-eight turns out of them.
Place them on top of each other from largest to smallest
To fasten the bow - to do this you need to thread a small piece of ribbon of the same shade into the last turn

The finished product will fit into any packaging box and will be especially stylish when combined with round and oval shapes.

The following video will clearly present a master class on how to make many small bows from a narrow ribbon using a dinner fork.

Hair ornaments

Handmade hair bows are a great way to stand out. To do this, adhere to the following points:

Take 2 pieces of tape (5x25) and a thin tape
Fold the corner at one edge of the wide ribbon
Combine the end of the second corner with the first
Connect the resulting corners with a needle to form a loop.
Then do the same next to the corners. Turning the product over, make another corner (perform these steps until a triangle of tape remains)
Bend the resulting “diamond” in half twice
Fold the free end to form a triangle
Carefully hold it in the center so that the structure does not fall apart
Remove the needles and bend the inner triangle to create a petal.
Sew the element in the middle

After this, you should prepare another such part and connect both using a narrow ribbon. To attach the products to your hair, you will need a clip or elastic band.

How to make a chic bow from nylon ribbon

To ensure that the process of home crafts is not too labor-intensive, it is enough to follow the step-by-step steps:

You will need 2 ribbons of the same size (150x8)
Bend each one in half and try to thread it on a needle and thread.
After finishing the work, pull the thread so that the remaining piece of tape is 30-40cm
Make a knot and straighten the resulting product
Take thick felt and prepare a circle (diameter 8cm)
Make two holes in it and thread a thin ribbon through them
Glue the first tape to the base in a spiral, then the second.
Cut off the rest of the tape and trim the ends