How to make an elegant hairpin from satin ribbons. DIY ribbon hairpins: a master class with a photo

DIY ribbon hairpins with photo workshops

Recently, it has become popular to make hairpins from ribbons with your own hands, as well as elastic bands and braid pigtails with ribbons. In such needlework, the kanzashi tsumami technique from satin ribbons helps. Our master class, as well as video tutorials, will be devoted to creating kanzashi tsumami hair ornaments.

We make a hairpin from ribbons

We will start our master class by creating kanzashi hair clips for beginners. To do this, we need such accessories, namely:

• cuts of satin ribbons, you can also rep ribbons, orange and white;
• decorative material in the form of a rosette and a black bead;
• scissors;
• textile glue;
• fire candles or lighters;
• simple hairpin.

The scheme for creating a hairpin is simple. Take the ribbons and put markings on them with a simple pencil, 5 by 5 in size, in the amount of 16 pieces. We do this procedure with a white ribbon. Cut everything into squares and pour fire over candles or lighters so that the threads do not spread, and you could make kanzashi tsumami. Look at the photo, here's what you should get.




For such a hairpin, we will make pointed petals. This technique is very common and on video, on the Internet, you can easily find it.
Pointed double petal, make it orange, inside it will be white. Take the orange square and bend it diagonally, then one more time and fire over the corner. Fold the white blank also diagonally, only three times. Look at the photo to see what happens.






Attach the white blank to the orange one and make a petal. Remove the end and excess material and scorch with a flame. We should have 16 such elements.
To decorate the hairpin, we need a few more pieces of simple single-layer blanks. Do from a piece of tape, exactly the same actions that we did above in the text.


Simple pointed petals are made in the same way as two-layer ones. Let's not repeat ourselves so as not to waste time. Such a process can be seen in the video or photo in the text.


We need twelve pieces of such blanks.
Our master class continues, and we begin to make with our own hands, the main part of the hair clip. We cut out a circle with a diameter of 3.5 cm from thick cardboard and stick a tape on it. In the end, it should form, such an element.


Now let's move on to connecting all the elements together. Take double pointed petals, and after smearing them with glue, we attach them to the round base. We do it in a circle. Do this technology, clearly along the edge, attaching tightly all the petals. This should be the first tier of the flower, as shown in the photo.






Next, you need to cut out another circle with a diameter of 2.5 cm and also paste over with satin. Then, in a circle, glue simple petals. In the end, you should have such a do-it-yourself tsumami kanzashi blank.








This small flower must be smeared with glue from the wrong side and carefully glued to a large bud.




Our master class is coming to an end, it remains only to decorate the flower. For this, we need a socket with a black bead.


Drop a drop of glue on the rosette, and then on the bead, paste this decoration into the center of the flower and press it with your finger. Look what a kanzashi tsumami we got.


Now take a simple hairpin, crab or elastic bands, on which we will attach a flower.
We apply glue on a hairpin or crab, and press the flower to it, holding it a little with our fingers, for complete solidification.






On the finished accessory, spray a little hairspray.
This master class for beginners is fully completed. In the same way, you can decorate hairpins or elastic bands. We hope that our video tutorials will be useful for you, and you will be able to create new hair jewelry with your own hands.

Kanzashi hair band

Such an interesting master class will be devoted to creating elastic bands using the kanzashi tsumami technique for hair. For this, we will need the following materials:

• narrow blue and blue ribbon. For use, it is better to take satin ribbons, but you can make an elastic band from rep ribbons;
• scissors;
• candle or lighter;
• textile glue;
• piece of satin fabric;
• rhinestones;
• regular gum or crab.

These rubber bands are for, we will make two-color ones. To do this, take the blue and blue ribbons. One is two meters long and the other is one meter long. Blue material, cut into cuts of eight centimeters, and blue material, into cuts of seven centimeters.




Fold each flap in half so that you get an overlap and pour over with fire.


From a piece of cloth, it is necessary to cut a circle with a diameter of 2.5 cm and douse it with fire. Then, we begin to glue the blanks, symmetrically to each other.








From the first to the third tier, the color of the petal will be blue. The next two tiers, you need to create a blue tint. Trim the topmost elements to make them shorter.


In the middle of our kanzashi tsumami flower, which we made completely with our own hands, we glue a beautiful rhinestone, shaped like a heart.


From the wrong side, we attach a simple elastic band for or a crab bought in a store for little money. Before that, make a small mount for her.




Our simple master class on creating an elastic band is completed. We hope that these lessons for beginners on the kanzashi technique impressed you. The same method is used when decorating hairpins. A detailed video can be viewed on our portal.

Master class for weaving a ribbon into a braid

Since ancient times, shiny and beautiful hair has been counted as a sign of beauty in women. A braid with a ribbon was considered a symbol of chastity and wisdom. If your hair is well-groomed and shiny, then you are a wonderful hostess.
Nowadays, braids with ribbons have not lost their uniqueness. On the contrary, they have acquired many admirers. How to weave a ribbon into a braid, every representative of the weaker sex asks herself a question when she is going for a holiday or just to work.
Our lessons will help you master the art of weaving braids with ribbons.
Braids woven with satin ribbons make a woman more mysterious and tender. Especially interesting, the tape looks on dark and long hair. If you don’t have a suitable ribbon at hand, you can create a thread with beads with your own hands. Such an accessory will turn a simple hairstyle into an evening option.

Prepare all the necessary materials to create a beautiful hairstyle, such as:

• crest;
• satin ribbon;
• crab and hairpins;
• decorative hair material, such as kanzashi tsumami flower.

You can insert the ribbon into a simple pigtail. If you want to create a bow at the end, then take a material that is longer. So, let's start our lessons:

• comb your hair well and make a ponytail with an elastic band;
• tie a ribbon on the elastic to hide it under you. The resulting edges of the tape should be the same length;
• divide your hair into three buns, and connect the outer strand with a ribbon. Then, weave a pigtail, as always;
• at the end of such work, tie an elastic band, and make a bow on top of it.

A hair style like a braid with a ribbon can be braided not only on the back of the head, but also on the sides or on the crown. If you have very long hair, braid around your head and secure it with a hairpin.

Now, let's do a French braid for beginners, also embellished with ribbons. Let's start the lessons:

• comb your hair and make an even parting. Braid the braid from one side, and then from the other;
• make three bunches of hair on top, grabbing auxiliary strands from the face and begin to weave a French pigtail. When your weave reaches the neck, secure it with bobby pins. On the other side, do exactly the same actions;
• connect the braids together and decorate with a ribbon. Then, start weaving a simple braid with a ribbon.

Our wonderful master class is completely finished, with the help of your imagination, you can weave beautiful braids, decorating them with ribbons of your choice. An interesting video on how to weave braids with ribbons can be viewed on our website or on the Internet.

Video: DIY kanzashi hairpin

Comments

related posts:

DIY hairpins from beads in a master class (photo)

Homemade accessories are a guarantee of originality and exclusivity, because even according to one instruction, different needlewomen get different products.

In this master class, we will tell and show how to make do-it-yourself hairpins from satin ribbons with kanzashi flowers. The main thing that is required for manufacturing is accuracy and patience. If this is your first time with this technique, take plenty of materials to practice and choose the most successful elements.

Materials for making hairpins with flowers

To make flowers, prepare a satin ribbon:

• 24 thin cuts of red or brown, 0.5 cm wide and 6 cm long;
• 24 thin orange cuts 0.5 by 5.5 cm;
• 24 thin slices of lemon color 0.5 by 5 cm;
• 24 thin ivory cuts 0.5 cm by 4.5 cm;
• 11 squares of lemon shade with a side length of 2.5 cm;
• 8 lemon slices 2.5 cm wide and 10 cm long.

Also needed:

• 5 strips of golden brocade 1 cm wide and 5 cm long;
• round base of yellow or white felt 4 cm in diameter;
• wide hug-water lily of golden texture;
• ruby half-bead of bright color 0.6 cm in diameter;
• hot knife (soldering iron or wood burner).

Step by step assembly instructions

Prepare pieces of satin ribbon 0.5 cm in different colors and sizes, focusing on the list of accessories. Working with a delicate satin involves processing a cut edge; for this, use a lit candle or lighter. Singe the fabric as quickly and carefully as possible so as not to spoil the wax and not melt too much.

The selected shades look harmonious together and give a beautiful smooth transition from dark to light in the finished flower.

Close each strip in the form of a drop. Leave the front side outside, and the wrong side inside, singe the combined ends with a lighter and squeeze with your fingers. Since cuts of different lengths are initially used, the size of the droplets will gradually decrease.

Start nesting each smaller piece into the larger one. Collect a multi-layered droplet. Once again, heat the satin with a flame and squeeze to hold all the components together. The resulting drop of satin ribbons will become a petal for a flower - the main decoration of the hairpin.

Make 24 drops for one flower. Accordingly, for a pair of hairpins, it is necessary to prepare 48 pieces.

Cut out a round felt base. Use yellow felt that matches the color of the ribbon or white. Glue the first row of drops around the circumference, consisting of 8 pieces.

Turn the blank with the back side towards you and stick the remaining drops, shifting them into the gaps between the petals of the top layer.

The lower part of the flower will consist of three layers, modeled from 24 four-layer droplets.

To create the top layer, use 2.5 cm lemon squares. Sing all sections in the same way. From the prepared parts, model the sharp kanzashi petals. To do this, in the first step, bend the squares diagonally.

Then bend again. When working with the tape, it is convenient to use tweezers. Clamping the resulting triangular blanks in a forced position, close their ends. Scorch again to seal the ends.

The resulting petals have an oblong shape resembling a boat. From below, cut off the excess part of the tape so that the boats become flat.

From 11 prepared squares, make the same petals. Glue them into a flower. Glue a wide water lily hugger in the center and insert a ruby ​​into it.

Unravel 1 cm wide pieces of golden brocade almost completely to get a fluffy fringe. Leave a few threads at the base intact, for reliability, also burn the unraveled edge so that the fringe does not fall apart.

Distribute five golden pieces evenly around the circumference, dropping glue into the center.

Glue an elegant flower on top, modeled from sharp lemon petals.

To make an imitation of leaves, prepare lemon-colored strips 2.5 cm wide and 10 cm long. Bend across the center, clearly aligning the singed opposite ends of the satin ribbon. Next, place the workpiece on the towel, heat up the knife blade or soldering iron and swipe diagonally. The result will be two parts, one of which will be made in the form of a bag. It is this part that you will use for further work. Press down on top with your fingers.

Glue the leaves to the bottom of the flower so that only the sharp tips peek out. Dock the ends of the diamond-shaped blanks in the center.

To make a pair of beautiful kanzashi-style satin hair clips, make two identical flowers with your own hands. The size of the finished product is 10 cm. On the reverse side, you can stick a steel crocodile clip or a yellow rubber band to make an accessory for creating fashionable hairstyles.

If you need a bezel, take a look at, and here they are waiting for you with a different design.

Svetlana Sorokina prepared a master class for readers of the online magazine Women's Hobbies. Photo of the author. All MK in kanzashi.

DIY crafts made from various materials are a simple and inexpensive way to realize yourself creatively and spend time with benefit. This also applies to mothers who want to improve or improve their relationship with their children. After all, joint creativity brings us very close, and our beloved daughters and sons develop creative thinking, small habits and work habits, and this is so important in education. You can learn to knit together, sculpt from clay or plasticine, sew and embroider, do scrapbooking, quilling, carve wood figurines and much more. One of the simplest products that can be made while co-creating with your daughter are hairpins made of rep or satin ribbons, which she can wear herself or give to her friends.

Training

First you need to collect all the materials. It is also better to choose them together with your child in a sewing accessories or creative materials store. To do this, we take our favorite rapeseed ribbons and satin, beautiful buttons and beads, ready-made flowers. By color and pattern, it is better to choose those that can be combined together. In addition, we need a base: small metal hairpins, preferably empty. But for the future, you can take empty headbands and elastic bands.

You also need to stock up on glue, threads of suitable colors for the future, put scissors and a ruler, a needle bar and a trash box on a table covered with oilcloth for creativity. It should be remembered that from the earliest years the child must be taught to be clean and tidy. To do this, you need to set an example for him by the fact that in the process of creativity all the garbage is immediately thrown into the prepared box, and not scattered on the table. The result of the work will be much neater if the work surface is not cluttered with foreign objects. Now we are ready for joint creativity, and we will learn how to make hairpins from ribbons further. Let's get started!

Option one: to the celebration

This simple solution is suitable for women of all ages, from the youngest to the mature. So, our do-it-yourself ribbon hairpin will be made with a large flower bought in a craft store. To begin with, we will make a base, which we will use in other products. To do this, we take a simple small “crocodile” hairpin and a rep ribbon of a suitable width, open the “teeth” with one hand and begin to glue the ribbon first from the inside, and then from the two outer ones, as shown in the picture. Glue should not be spared, but you don’t need to fill the entire space with it, otherwise the material will be saturated and become too hard, and you will be smeared. We wipe off the excess with an unnecessary cloth or a piece of newspaper. We leave to dry.

During this time, you need to pick up an artificial leaf and flower to each other. They should match in size and look natural. Now we just have to glue them to the previously made base, and our simple but elegant do-it-yourself ribbon hairpin is made!

Option number 2: small jewelry for babies

As in the previous example, we need to make the basics with grosgrain ribbons. It is better to make several pieces of different colors at once so that you can match them to your princess's outfits. It will look very nice from satin ribbons, while you can make the flower both small and large.

It will consist of two levels of 5 and 4 petals, and we will decorate the center with a shiny bead. So, to make a flower, we take 9 identical squares from the tape, fold them first diagonally, and then in half. It is better to work with tweezers, because the details are quite small. So, first we cut the corner, then the base, and singe. From the side of the corner, it is better to hem with a thin needle for strength. Now we string 5 petals on a thread first and sew them into the first level of the flower, and then 4 for the second. Our do-it-yourself kanzashi ribbon hairpin is almost done, all that remains is to sew both levels to each other, decorate the center with a bead and glue the finished flower to the base. Ready!

Option 3: an idea with a twist

In the previous paragraph, we made using the technique of satin ribbons. Hairpins from them, no doubt, are very cute, but you can make them even more interesting. To do this, we need a wide and thin green and wide pink rep ribbons. From the latter, we make a flower using the previously described technique or a simpler one. It will consist of six simple petals with sharp edges, fastened in the center. To decorate the seams, you can make a snowflake from white beads or pick up a beautiful bead, everything is up to your imagination. So, the first part is ready.

Stage two

Now we fold a figure-eight from a wide green ribbon, carefully burn the edges with a lit match and sew in the center, pull it together quite a bit so that the bow turns out to be larger than a flower, but not much. In general, when making any jewelry from ribbons or fabric, you need to learn how to combine colors, patterns and sizes of blanks. To do this, you can use special schemes and tables, look for ideas in stores. So, further from a thin green rep ribbon we cut off 3 short pieces, 8-10 cm long. Using scissors or a metal ruler, we make curls on them, preferably the same. This will be the highlight of our future hairpins.

Stage three

So, we sew these curls from the bottom of the green bow, and on top we fasten with glue (since we can no longer hide the seams with decor) a pink kanzashi flower. As a result, we just have to stick this charm on the base, which we will also pre-wrap with a green rep ribbon, as on curls. This must be done very carefully so that the blanks are not stained with glue, because the decoration should look like it was bought in a store, only even better. That's all, so we learned how to make a hairpin from ribbons using the kanzashi technique with a small but very cute twist.

Option number 4: bow

The best embellishments for girls' garments or accessories are not only ruffles, lace and flowers. A mandatory attribute is a bow, in the form of which our next do-it-yourself ribbon hairpin will be. It is suitable for both everyday wear and festive - it will depend on the combination of colors we have chosen. For our hairpin, you will need three types of rep ribbons: wide white and pink and thin with small polka dots of similar shades. Both bows will be made from the first and in structure will be two crossed eights. Therefore, we make 4 segments 20 cm long, mark the center on each and fold the side edges to it. Now singe the edges, stitch in the middle and tighten. So, our bows are almost ready.

Terminating a process

Next, we put on top of each other two previously prepared “eights” of identical colors and again sew the centers with a neat seam. So that later our seams would not be visible, we need a short piece of a thin pink ribbon, with which we will decorate the center of the hairpin at the very end. So, now we add up what happened: put white and pink bows on top of each other, sew or glue (the first option is preferable, since such a product will be stronger). Now we cut out two strips of 5 cm from a thin ribbon with polka dots, remove small triangles at their edges and singe with a lighter or a match so that they do not crumble. Everything, it remains only to assemble the product. We put the last blank on the double bow, stitch it, and wrap the center with a thin pink ribbon and tie it behind. Now we glue everything onto the finished base, and our wonderful hairpin for the girl is ready!

To turn an ordinary hairstyle into a solemn one, just add accessories. Hair hoops, hairpins, elastic bands change styling and emphasize the chosen style of clothing. A well-chosen accessory can enhance the image or fail it. Therefore, it is important to carefully select jewelry. If we talk about hairpins, then they are on sale a large number of. Elastic bands and hairpins made of satin or rep ribbons are especially relevant.

But, finding a 100% suitable accessory is quite difficult. It remains to make a hairpin yourself. Moreover, for its manufacture you will need inexpensive materials. And the creative process is interesting and exciting. How to make hairpins from ribbons with your own hands?

DIY ribbon hairpins for beginners

Many girls are afraid to take on the manufacture of hair jewelry, because they are sure of failure. Others think that the process takes a lot of time, plus you have to buy half the goods in needlework stores. In fact, everything is much simpler. At the initial stage, you will need 2-3 shades of ribbon and beads. From improvised materials, prepare scissors, thread with a needle, a candle.

Do-it-yourself ribbon hairpin options for beginners:

Poppy hairpin. Take a wide satin ribbon of bright red color. Then cut it into squares of different sizes. These will be the flower petals. The number of blanks depends on how lush poppy you plan to make. Next, each petal is burned with a candle from all sides. This action is performed for two reasons: the ribbon is prevented from blooming, the blanks are given an uneven shape, similar to a petal. Next, take the blanks and put them on top of each other. Your task is to fold the petals in such a way that they look like a flower. Next, sew the blanks in the center with a needle. To mask the middle, take black beads and sew to the center of the poppy. It remains to glue the automatic mechanism or “clothespin” on the reverse side.
It will take even less effort to create a second hair clip. Take a ribbon and cut a piece 15–20 cm long. The splendor and size of the flower depend on this indicator. Adjust the length yourself. Next, fold the material in half along the long side. Take a needle and thread and start stitching the braid, forming frequent folds. You will get a workpiece that looks like a caterpillar. If you want to strengthen the folds, then tighten the thread. Then fix the position, lay the last stitch. The edges of the braid, treat with fire. Next, take one end of the workpiece. This will be the center of the flower. Now twist the prepared tape around it. You will get a circle that looks like a flower due to the folds. Fix the position of the hairpin by attaching a circle of felt to the back side. Glue a “crab” or a mechanism from a machine hairpin to it. Place a beautiful bead in the middle.

If there is not enough time to make a hairpin, then take a satin ribbon and weave it into a braid. Secure your hair with an elastic band. Tie a ribbon on top in the form of a beautiful bow.

Kanzashi hairpins

The Japanese technique of creating hair ornaments has gained particular popularity. Looking at the kanzashi hairpins, it seems that it is impossible to repeat after the needlewomen. Products consist of many elements or one lush flower. To master the kanzashi technique, start by creating the petals. Once you have mastered the basics, you can move on to creating a hairpin. To do this, you will need to perform the following steps:

Take a satin ribbon and cut into squares, rectangles. To correctly determine the number of petals, draw a sketch of the future flower on paper.
Then fold the ribbon diagonally. Get a triangle. Connect the corners of the workpiece and burn with a lighter. So you fix the part and prevent the petal from dispersing. If you want to make a petal of two flowers, then prepare smaller blanks and put them in the main form.
Combine the blanks into a single composition. If this is a round flower, then cut out the base from cardboard and tape it with the main shade. Then glue the petals onto the workpiece, observing the natural pattern. The first row - the largest petals, near the center - small ones. Glue a rhinestone, beads in the middle, lay out the stamen with beads. Experienced needlewomen use a special socket into which they put a black bead. At the final stage, attach the mechanism from the old hairpin.

According to the technique of making blanks and collecting the overall composition, kanzashi is compared with modular origami. Since hairpins in the form of flowers decorated with beads and rhinestones are made with this method, kanzashi jewelry looks feminine and elegant.

DIY ribbon bows

Making such hairpins will appeal to beginners. Bows give the image of coquettishness, romance. To create, you will need the remains of ribbons in three shades. To make DIY ribbon bows, follow these steps:

Take some cardboard and cut out a rectangle. Next, take the main color and wrap the workpiece three times. Polka dot colors are suitable for bows. For the bottom base, use a wide ribbon.
Then remove the cardboard part and sew the material in the center. After that, straighten the bows in different directions. Burn the ends with a lighter or candle.
Next, take a narrow ribbon of a different shade and cut out two blanks. Attach them to the bow to adjust the length. The size of the workpiece should be smaller than the base of the hairpin.
If necessary, trim the ends and burn the pieces. Next, attach to the center of the bow and sew a cross to the cross.
At the last step, take a transparent ribbon and make a bow, as described in the first paragraph. Process the sections of the braid and sew to the center. It turns out an elegant bow, consisting of three layers. Fill in the middle by gluing a bead.

To attach an elastic band or a hairpin, prepare a base of cardboard covered with tape. Next, glue the mechanism or make a loop for it.

DIY hairpins from rep ribbons

Such products flaunt on the heads of young fashionistas. There are few mothers who aspire to girls. But, taking care of them is not easy. Curls are confused, do not obey, do not lend themselves to styling. Hair accessories in such a situation save. DIY hairpins made of rep ribbons are bright and original.

The order of work is as follows:

Cut off a piece of ribbon. Burn the end so that the hairpin does not bloom.
Next, glue the tape to the clip. Start fixing the tape with the "tails" of the clip. These are the details we click on to open the barrette. Tape is glued on all sides except one. This part will not be visible, as it will be hidden behind the hair.
To give the hairpin extra mass and strength, weight the jewelry. Cut out a piece of foam equal in size to the tape. Then stick the blank under the clip part, which will be visible. Position the foam on the inside.
Then prepare three pieces of rep tape. Fold the first and second blanks in a circle and glue the ends together. Then press the sides together. It turns out two bows. Tie the third piece in the middle with a knot.
Next, add the details to the composition. Place the bows diagonally. Lay out the braid with the knot on top, placing it in the center. This will be the outside of the part. Next, tuck the ends of the segment, cut off the extra pieces. Glue the blanks, burn all the cuts. The result is two bows, with a knot in the middle.

Next, glue the resulting decoration to the clip. The size of the clip depends on the clip used. Make paired hair clips in different colors to give your daughter jewelry to match any outfit. Rep ribbons are interesting in that decorations of various shapes are made from braid. Kanzashi technique and satin ribbons are used to create flower arrangements. Hairpins are made from rep braid in the form of a candy on a stick, a snowman, a Christmas tree, an elephant, a ladybug. Therefore, such jewelry is popular among little fashionistas.

Try making your own hair clips. Connect your daughter or niece to this process. Handmade jewelry conveys individuality and stands out with an unusual design.

Page content

Accessories stores are full of colorful elastic bands and hairpins of all colors and sizes. They attract attention and cannot be liked until you see the price for them. At the same time, their cost is a penny, and in order to create such hairpins for hair from ribbons with your own hands, a minimum of time and skills is required.

DIY ribbon hairpins master class

Satin ribbons are very easy to use. At the same time, the decorations and accessories that are obtained from them look very bright and impressive, it all depends only on the author's imagination. However, there are many ready-made ideas:

To make such a hair clip from ribbons, you will need:

• Two ribbons 1 cm wide in different colors;
• Needle with thread;
• Automatic hairpin;
• Scissors;
• Super glue.

When all the materials are collected, you can proceed:

1. Let's start with dragonfly wings. Cut off from the tape 2 pieces of each color 12 cm long, 2 pieces of each color 10 cm long and 2 pieces 8 cm long.
2. We need to make 2 pairs of wings: front and back. They are made in the same way.

We take a tape 12 cm long, connect its end to each other. We do the same with a ribbon of a different color 10 cm long. Change the color again, put a ribbon 8 cm long into the same ring.

Now we put the rings into each other, applying the junctions of the edges of the ribbons to each other. We flatten this design in such a way that wings are obtained, as in the figure. For convenience, you can fasten them with a couple of stitches.

We do the same actions again to get the second pair of wings.

1. We decorate the base for the hairpin with a ribbon, cutting off a piece of the required length and gluing it with superglue.
2. Cut off 2 strips of 1mm for the antennae, glue them to the base.
3. We attach two pairs of wings to each other, wrap it with a ribbon in the middle, fasten it with a thread and glue it to the base, retreating a few centimeters from the edge.
4. Let's make two small rings of the same color as the base. Glue them in front of the wings and after them. The hairpin is ready.

In order to create such hairpins from ribbons, we don’t even need the ability to wield a needle. It will be enough to have with you:

• Ribbons of three colors of different widths;
• Double sided tape;
• Super glue;
• Thread.

Let's start by deciding on the colors of the ribbons. They must be combined with each other. Pastel shades will look especially good.

1. Cut 2 pieces of 10 cm ribbon of medium width. Put double sided tape in the middle of each piece. Fold them into a figure eight and connect them with a thread into one bow, as shown in the figure.
2. We do the same actions with the widest tape.
3. Lay two bows on top of each other, tying them with a thread in the middle.
4. Tie a narrow ribbon into a knot. We need it in order to neatly hide the thread. Lay it across two bows, secure with double-sided tape or superglue at the back.
5. The bow is ready. It remains only to attach it to the hairpin. Superglue will help us with this again.

This element can be used not only as a hairpin decoration, but also as an independent accessory, for example, a brooch.

We will need:

• Satin ribbon;
• Grid;
• Felt;
• Scissors;
• Needle with thread;
• Beads.

Making such a hairpin is available even to a beginner needlewoman and takes only a couple of minutes:

Cut out a circle of the desired size from felt. This will be our base. From the grid we cut off a ribbon a little wider than our satin ribbon. We begin to sheathe the base along the outside with both the grid and the ribbon. We make small folds by putting the tape on itself, as shown in the picture.

Having decorated the base around the entire outer circle, we proceed to the second level. We do the same, but closer to the middle.

We decorate the empty place in the center with beads of various sizes, sewing them on or fixing them with superglue.

Now we glue the bow to the clip of the hairpin, and we get a stylish and spectacular accessory.

There are many options for making hairpins from ribbons. Among which there are very simple ideas, the embodiment of which even a child will succeed. But there are more complex ideas that only experienced craftswomen will be able to do.

The simplest hair clips, which, nevertheless, look very cute and original.

Refined and elegant hairpin for the most refined young ladies.

Delicate pink satin ribbon hairpin adorned with a mother-of-pearl bead.

A neat country-style hair clip is suitable for both a holiday and every day.

A round hairpin with polka dots is an accessory for the funniest and most cheerful girls.

You can’t distinguish such a hairpin from a store-bought one, and even an adult woman can decorate her hair with it.

Absolutely any figurine can be fixed in the center of such an unusual hairpin, but especially little ones will like hairpins with the image of the heroines of their favorite cartoons.