Penguins made from plastic bottles: a spectacular New Year's decoration. Master class on making a New Year's toy "Penguin" from a plastic bottle Christmas tree toy penguin from a plastic bottle

By using useless plastic bottles as consumables for crafts, we contribute to preserving the environment. And since the penguin is made from plastic bottles with his own hands. To prove this, we would like to present ideas for making with our own hands a craft that is relevant for the winter season, suitable for decorating a home and garden, which will organically fit into any design - a charming penguin. Two different embodiments of the idea are described below. You can choose the type of penguin made from a plastic bottle that you like, or try both options. Your children can be involved in the manufacturing process, which will bring tremendous positive emotions to both parties. Don't worry, the work is very easy, there is no need for special skills or abilities. Interested? Then welcome to the photo master class on how to make penguin crafts from plastic bottles with your own hands! Also, if you like this article, we have more on the topic for your garden.

You will need the following materials for the penguin:

• two 2 liter plastic bottles
• paints black, yellow, white
• paint brush
• braid
• pompon
• thermal hot glue gun

Step-by-step instructions with attached photos

• Gently rinse bottles, removing labels
• Cut the bottles in the middle, use the bottoms

• To create the base - the body of the future penguin from a plastic bottle, combine two cut parts of the bottles into one, see photo. The bottom of the bottle on both sides acts as the head and legs of our penguin. You can optionally fix the bottles with glue, but you can do without it, since the bottles fit quite tightly to each other.

• Paint the penguin's future body with basic white paint. In our case, aerosol paint was used. Once the paint has dried, use black paint to paint the penguin's toe, which will give the piece a more defined outline. Keep in mind that the so-called widow's toe should be parallel to the penguin's lower legs. Draw the penguin's hat in the desired color, in our case we chose blue.

• Draw eyes and a beak for a penguin made from a plastic bottle, which will give our craft made from plastic bottles a finished look. The paint must dry.

• Tie a ribbon on the penguin's belt, which will act as a scarf and will also disguise the junction of the plastic bottles. Glue the pompom to the top of the hat using a hot glue gun. A charming penguin made from plastic bottles with your own hands is ready!

Another method and instructions with photos

You will need the following materials for the penguin:

• sticky tape/scotch tape
• colored paper
• plastic bottle
• scissors
• PVA glue

Step-by-step instructions with a photo of a plastic penguin:

We showed you two options for how to make a penguin from a plastic bottle with your own hands. Using this example as a basis, you can create any compositions, limited only by the flight of your imagination, for yourself, friends, family and loved ones. Gifts made with your own hands carry love and warmth coming from the soul, they warm you with warmth, so they are always received with a bang!

Video of a penguin from a plastic bottle

The favorite characters of many children and adults are penguins. Of course, from the cartoon "Madagascar". Bringing the cartoon characters into reality and leaving them to guard the garden house is our task for today.

We will create penguins from plastic bottles: the material is common and easy to work with.

We should end up with these cute guys:

Penguins made from plastic bottles look great in the snow and with their entire appearance remind you of the imminent arrival of the New Year.

Penguin from a plastic bottle: master class

1. First we need a bottle. If you use a standard plastic bottle, for example, an oil bottle, the penguin will turn out very thin. It is better to use “pot-bellied” bottles. A penguin toy from such a plastic bottle will turn out large and beautiful:

The color of the bottle is not at all important, since it will be completely covered with opaque paint.

2. Cut the bottles in half and leave the bases.

From two bottle halves you will get one cute little penguin.

3. Now glue the two halves together.

4. Now the fun begins. First, we need to cover the resulting workpiece with white paint. It is most convenient to spray paint from a can, but you can also use regular acrylic paints and a good old brush.

5. We begin to paint the toy. First we draw the border of the “tailcoat”, then we outline the eyes and beak. We draw bright clothes so that the penguins stand out in the snow.

6. Now you need to prepare a pompom for the hat. To do this, take two cardboard rings and put them together...

And wrap it with threads.

Then we cut the threads along the outer circumference. We insert one part of the scissors into the gap formed by two cardboard circles and cut the threads in a circle without touching the layer of threads along the inner circumference. We don't remove cardboard!

Now take a thread, insert it between two pieces of cardboard and tighten it. Uncut threads along the inner circumference are intercepted and collected into one “sheaf”.

Now remove the cardboard and straighten the threads. It turns out this funny pom-pom:

7. All that remains is to glue the pompom to the drawn hat, and the craft from a plastic pinvin bottle is ready!

Next we will tell you how to make a penguin from a plastic bottle quickly and easily. Such an interesting craft will definitely become a real “highlight” of your garden and will take pride of place in the flower garden or next to an artificial pond.

Master class: funny penguin from a plastic bottle

In order to make an original garden penguin figurine, you will need the following tools and materials:

• 2 liter plastic bottle;
• acrylic paints (black, white, yellow);
• toy eyes;
• black cardboard;
• glue.

So, let's look at how to make a penguin from a plastic bottle. Let's take a transparent container, wash it and remove paper labels from it. Now let's pour black paint into it and close the bottle with a lid. Lightly shake the plastic container so that the paint gets onto all the walls of the container. After this, open the bottle and leave it alone for a while.

Charming crafts from plastic bottles: DIY penguins

While our workpiece is drying, let's work on the penguin wings. Cut out two oval-shaped pieces from thick black cardboard. These will be the wings. Now let's take white acrylic paint and draw a bird's belly on the outside of the bottle. We will decorate the beak and paws with yellow paint. Glue the prepared wings. That's all, the penguin is almost ready. All that remains is to attach toy eyes to the bird’s face. If you wish, you can decorate the craft with sparkles, beads or fabric. Now you know how to make a penguin from a plastic bottle. In fact, it's not difficult at all. Even a child can make such a craft, of course, under the supervision of an adult.

We create a beautiful black and white bird from scrap materials

If you want to enliven and diversify the interior of your home, pay attention to this simple master class on making a penguin from a plastic container. The product is attractive, bright and very colorful. To complete this craft, you will need two identical bottles, glue, strips of fabric, a marker, and leftover yarn of different colors. First, thoroughly wash and remove stickers from plastic containers. Then cut the bottles as shown in the picture.

Insert the resulting parts into each other and glue them together. Then take white acrylic paint and cover the entire piece with it. After the product has dried, use a black marker to draw an outline that will define the boundaries of the penguin's tummy. Now cover the workpiece with black paint, leaving only the part inside the outline and the top unpainted. Use orange paint to paint a triangular nose and hat. Then paint the top of the craft. Make a pom-pom from yarn and attach it to the center of the penguin's hat. Cut a scarf from a piece of fabric and tie it around the neck of your cute bird.

Such a charming penguin, constantly drawing attention to itself, will become a bright detail in the interior of your home.

Charming "penguin". We design a summer cottage with our own hands

We present to your attention another simple technology for making crafts “penguins from plastic bottles”. To create it, you should prepare the following consumables:

We'll tell you how to make a penguin from a plastic bottle below. First, paint the container with black acrylic paint on one side - this will be the back of the penguin. Then take cotton balls and place them in the bottle. Fluffy pieces of cotton wool will be clearly visible through the transparent plastic. They will make the bird's abdomen look very realistic. Then we will make the penguin wings - we will cut out oval blanks from black cardboard and glue them to the sides of the bottle. Let's decorate the face - attach toy eyes to the lid of the container, and make a nose from an orange piece of fabric. We will make a “tuft” from black feathers. That's all - a funny and cute craft made from a plastic bottle is ready. Show your imagination and decorate your penguin the way you want. You can glue sparkles, beads, buttons, tie a bow or scarf, and also make a funny hat from an ordinary old sock.

Making a large penguin from a 10-liter plastic eggplant: necessary tools and materials

If you want to decorate your garden, make beautiful crafts from large plastic bottles. Penguins from large containers turn out to be very interesting. Such products will decorate a stone wall and will fit perfectly into any landscape. So, let's look at how to make a penguin from plastic bottles. To make one large bird, you will need two plastic containers, one with a capacity of 10 liters, and the second with a capacity of 1.5 liters. You also need to prepare a sharp knife, acrylic paints (black, white and red), sand to weigh down the bottle and a wooden peg for the beak.

Funny garden figure made of plastic

So, how to make a penguin from a 10 liter plastic bottle: take the prepared container and cut off the neck, but so that the narrowing part remains. Pour some sand into the container (to make it heavier). To make the head, use a one and a half liter bottle. Cut it in half and insert the necked part into the “body” of the bird. Now fasten the parts: make holes in the plastic with an awl or nail heated over the fire and thread the wire through them. Make the beak from a pre-sharpened wooden peg. Insert it into the neck of the smaller bottle. After making the frame, you can start painting the penguin. Use black paint to paint the back and wings. Make the paws red and decorate the beak. Use white acrylic paint to paint the abdomen. After completing the work, let the product dry. That's all, the adorable penguin is ready.

You can look for a place for him in the garden. You can make babies from smaller bottles - as a result you will get a family of cheerful and elegant penguins. Good luck with your creative experiments!

Penguins are favorite fairy-tale characters of both adults and children. In many cartoons you can see these cute and cute characters. Nowadays, the cartoon “Madagascar” is in great demand, but also don’t forget our Soviet cartoon “The Adventures of Little Penguin Lolo.” These wonderful cartoons have won the love of these cute creatures.
Penguins are such touching creatures. That when we see them, we still smile when we watch cartoons about these cute birds, so similar to us in some way. Why not make us a Little Penguin for our dacha. One more smile won't hurt us!!! Let's turn the cartoon characters into reality and let them live in our garden or playground. I think that children will be happy to see these cute creatures on their playground.
We will make penguins from plastic bottles and plastic bags: this material is quite common, and also very easy to work with. Upon completion of the work, you will not only receive pleasure from the work done, but also cute and cute penguins made from plastic bottles. You can take children as your assistants; they will be happy to help you create their favorite fairy-tale characters. Olga Baturina showed us and told us how to make a penguin from a plastic bottle and plastic bags with her own hands. Olga has already shared her work with us on the website, this is a dog made from plastic bags, and if you are interested, you can watch a master class on how to make it.

To make a penguin we will need:
* Plastic bottles.
* Plastic bags.
* Scissors.
* Textile.
* Wire.
* Styrofoam.

Method for making a penguin from bags and bottles:
So, let's begin! You can make any penguin, it all depends on your imagination and capabilities. We will need an ordinary plastic bottle. You don’t have to take it like Olga’s. You can combine two drinking water bottles and you will get a Big Penguin. Let's cut off the neck of the bottle.

Make a hole in the bottom of the bottle. The size is such that you can feel it later. This hole is needed in order to secure the Little Penguin later. Olga simply puts it on a knitting needle stuck into the ground. The baby penguin turns out to be very light and can fly away. But if you are making a penguin as a decoration for the garden, then you can pour sand or small gravel into the bottle. Then it will be heavy and will not fly away if there is a strong wind.

Let's make wings. Take the wire and bend it in half. We make holes in a plastic bottle for the wings and insert wire into them.

We take any fabric and cover the resulting frame with it. Don't worry, it's very easy to do!

This is the future wing of our penguin.

This will be Little Penguin's adorable tail.

Now let's make the plumage! Prepare thick cellophane bags or film and cut it into strips like this. We make feathers for the tail and wings, and fringe for the entire body. But you can only choose one cutting option. Olga did it differently!

Let's start connecting the plumage to the limbs. For example, from the wing. Take two cellophane feathers and join them at the tip of the wing, just like you would put your palms together. Secure everything with a seam. Sew the wing down to the body.

Now we sew the tail in exactly the same way as the wing.

Now we need to determine the bird's plumage pattern. Olga does this by drawing on fabric. And go ahead!

This is how Baby Penguin’s feather covering ends. If you have it in your headdress, then you can stop there, and if not, then trim it to the end.

Let's make the eyes. These are blanks for the eyes. First we draw, and then we cut it out of very thick cellophane, plastic, etc. Use your imagination! Your little penguin can have any eyes, both in color and shape. If you don't want to bother, you can buy ready-made eyes.

We connect the parts imitating a machine seam with threads of a suitable color.

These are the blanks for the paws, we make them from foam plastic. Foam fins. There were even poems. We cover the legs with fabric, with the seam facing inward. You will get socks for foam paws. The color of the fabric can even be white. You can then paint it the color you want.

The beak is made in the same way as the legs from foam. And its shape is also according to your desire. Olga's Little Penguin has a nose like this! All details are sewn with a hidden seam.

Hello! I'm ready! They also sewed a cap for me from thin cellophane. Now I'm absolutely handsome! All that's left to do is paint the paws.

That's it, the penguin made from a plastic bottle and plastic bags is ready, let's find a place for it in our garden or place it in the playground. Using this master class we make other similar penguins.

In conclusion, I would like to invite you to watch our favorite Soviet cartoon, “The Adventures of Little Penguin Lolo.” It seems to me that our bottle penguin is very similar to Lolo, don’t you think so?))). Write comments and also share your work on the site.

Copyright © Attention!. Copying text and photographs can only be used with permission from the site administration and by indicating an active link to the site. 2019 All rights reserved.

A penguin made from plastic bottles will become a worthy part of your interior or garden decor. This is a charming and relevant element, especially in the winter season; it can be safely placed under the New Year tree. And the kids involved in the process of making a baby penguin will receive a lot of positive emotions.

This master class describes in detail the entire process of creating an original craft!

To create a Penguin you will need very little:

- three plastic bottles of any size;
— acrylic and emulsion paint;
- scissors;
- brush of kolinsky or synthetic;
- pompom;
- foam sponge;
- glue.

To create the blank, you need to carefully cut two bottles in half. For this you only need the bottom part of the bottles.

From the third bottle, cut out the wings and legs of the penguin using ready-made templates.

The base of the parts is extended by approximately 1 cm.

This is what should happen.

If one of the parts fits tightly onto the other, you need to make a small incision.

The wings are inserted overlapping the top of the bottle and the bottom. To fix the legs, two small holes are cut in the bottom, into which the legs are then inserted.

We cover the entire area of ​​the product with white water-based paint.

The craft needs to be primed in two layers. Thanks to the density and thickness of the paint, you get this texture.

While the soil dries, you can cut a scarf from a plastic bottle. Its ends are cut into small strips.

After the soil has dried, use a marker to sketch the outline of the eyes, beak and breast on the workpiece.

And after that you should start color painting...

First, the penguin must be painted in primary colors.

Each layer should dry well; if unpainted spots and bald spots appear, you can cover the craft several times.

The contours can be drawn with an ordinary black marker on top of already dried acrylic paint.

As a result, the craft takes on a complete look; all that remains is to attach the pompom.

If you wish, you can make a pompom yourself or take a ready-made one (as in this case).

Using glue, a pompom is attached to our penguin's hat.

And the product acquired its final, completed look. The result is such a wonderful little penguin in a hat!

The final look of the craft.

The process of making crafts with your own hands is absolutely not labor-intensive and will not take much time. By boldly experimenting, you can end up with a very original thing that will decorate or complement the interior, adding a special atmosphere and comfort to it!

As for our environment outside the house, we can make a very original birdhouse from a plastic bottle for it, which will bring great benefits for birds that do not fly to warmer climes for the winter!