home › Health › Sleeveless jacket for babies with knitting needles. Knitted vest for a child

Sleeveless jacket for babies with knitting needles. Knitted vest for a child

Children's knitted things are very comfortable and easy to wear. And if you have at least the skills of a beginner knitter, you can try knitting a baby vest with knitting needles. The indisputable advantage of such a thing is that you can choose any woolen yarn for this model, for example, from alpaca wool or merino wool. This model is knitted without side seams, perfect for both girls and boys from 3 to 6 months.

Knitted children's vest

Product size: 62

You will need:

Any high-quality woolen or semi-woolen yarn (144 m / 50 gr.).

Circular knitting needles: No. 4.5

A children's vest is knitted with knitting needles in 2 threads. We collect 97 loops on the knitting needles and connect the loops into a circle. We knit the two extreme loops together.

Having knitted 16 cm from the beginning of work, we proceed to knitting armholes.

Having finished work, we carry out a shoulder seam only on one side. It remains to wash the vest in slightly warm water, dry it on a horizontal surface, steam it off and sew on the buttons.

For the vest you will need: 200 g of yarn (60% wool, 40% acrylic, 100g / 1600 m; thread in 8 additions), knitting needles No. 3 and No. 3.5; 6 buttons.

Elastic: 1 person., 1 out.

Knitting density: 21p * 16r \u003d 10 * 10 cm.

Back. Cast on 65 sts on needles No. 3 and knit 2 cm with an elastic band. Continue with knitting needles No. 3.5 with the main pattern according to the scheme. At a height of 33 cm from the beginning, close all the loops.

Right shelf. Cast on 41 sts on needles No. 3 and tie 2 cm with an elastic band. Continue with needles No. 3.5 and knit with the main pattern. At a height of 27.5 from the beginning, for the neckline, close 15 loops on the right and then in each 2nd row 1 time for 3 loops, 1 time for 2 loops, and 1 time for 1 loop. At a height of 33 cm from the beginning, close the remaining 20 shoulder loops.

Left shelf. Cast on 20 sts on needles No. 3, and knit 2 cm with an elastic band. Continue with needles No. 3.5 and knit with the main pattern. At a height of 33 cm from the beginning, close all the loops.

Sew shoulder seams. On the edge of the neckline and the vertical edge of the left shelf on the knitting needles No. 3, dial 140 loops, and tie 3 cm with an elastic band. Close loops. On the vertical edge of the right shelf and the short edge of the neckline on knitting needles No. 3, dial 57 loops and tie 3 cm with an elastic band, close the loops. At the same time, perform 6 loops for buttons: at a height of 1.5 cm from the beginning, at a distance of 1.5 cm from the bottom, with an interval of 5 cm, knit 2 loops together in the front row, yarn over, in the wrong row, knit according to the gum pattern. On the edge of the armholes on knitting needles No. 3, cast on 66 loops, and tie 3 cm with an elastic band, close the loops. Sew side seams. Sew on buttons on left placket.

The description of the model is taken from the magazine “Ksyusha. For those who knit" No. 2 / 2010.

Scheme of an openwork pattern for a children's vest:

You will need

- 50 g each of yellow, orange, blue and green Licorne yarn (100% mercerized cotton, 120 m / 50 g);
- knitting needles No. 2 and No. 3;
- knitting needles on fishing line No. 2.

Instruction

Start knitting the vest from the back. To do this, cast on 32 sts with orange thread and 32 sts with blue thread and knit in stockinette stitch between selvedges, while changing colors.

After 10 cm from the cast-on edge, start knitting on 32 loops with yellow thread, and on the remaining loops with green thread. After 13 cm, close on both sides for armholes once in 3 loops and in each 2 rows 1 time in three, 1 time in two and 3 times in a loop. And 23 cm close for the bevels of the shoulder on both sides once four loops and in each row 2 times three loops.

Now, with the beginning of the bevels of the shoulder, close the middle eight loops for the neckline and finish both separately, while in the second row close seven loops from the inner edge once. After 24 cm from the cast-on edge, close all loops.

To complete the right shelf, dial 31 loops with an orange thread and knit with the front surface between the selvedges. After 10 cm from the typesetting edge, start knitting with a green thread. On the left side, at the same height, make an armhole and bevel of the shoulder, as on the back.

Then, after 20 cm from the inlaid edge, close on the right side for the neckline once three loops and in every second row three times, once two and two times one loop. Close all loops at back height. Knit the left shelf symmetrically, only it should be blue, and finish with a yellow thread.

The vest is almost ready. Now complete the shoulder seams. For the neck band, cast on 9 loops with orange thread and tie 20 cm with an elastic band, then close the loops. Then sew the strap to the neckline.

For armhole straps, cast on 9 sts with orange thread and tie 24 cm with an elastic band, cast off the sts again. Next, sew the straps to the armholes. For the strap of the right shelf, dial 9 loops with orange thread, 10 cm with green thread and 2 cm with orange thread, close the loops again. Sew the bar to the right shelf.

And finally, for the strap of the left shelf, dial 9 loops with blue thread, and knit with an elastic band 10 cm with blue thread, 10 cm with yellow thread and 2 cm with orange thread. Close the loops. Sew the strap to the left shelf. Sew the side seams.

Sources:

vest for baby knitting

The vest is indispensable in the children's wardrobe. It can be worn under a fur coat or coat, it can also be part of an elegant suit.

You will need

Woolen or semi-woolen yarn of medium thickness - 200 g
knitting needles number 2
additional needle No. 2 from a set of 5 needles

Instruction

Vest start knitting from the shelf. Take two balls and type on the knitting needles folded together, first loops on the right half of the shelf, then, from the other ball, on the left. Immediately determine the place for the fastener - 8 loops from the edge of one shelf and symmetrically from the edge of the other. Knit them for the entire length of the shelf with a garter stitch. Knit the remaining loops of both shelves with an elastic band 6-8 cm.

Add loops to the main part of the shelf. Do this evenly across the entire width of one and the other shelf. Define the zipper line. These are the extreme 8 loops from the center of one and the other halves. Knit them in garter stitch. On both sides of the fastener, count 48 loops for the main pattern. The purl strips on the right are tilted to the right, on the left - to the left. Depending on whether you are knitting on or on, make a loop on one of the shelves by closing 3 loops along the front row and knitting the same number of air loops on the wrong side. Make loops at regular intervals along the entire length of the fastener. shelf pattern sample
Cast on 48 stitches +2 hem stitches
Knit odd rows on the right side, even rows on the wrong side.
1 row - 5 purl, 7 facial, 3 purl, 3 facial, 2 purl, 5 facial, 5 purl, 5 facial, 2 purl, 3 facial, 3 purl, 7 facial.
2 row and all even knit according to the pattern
3 row - 5 purl, 6 facial, 3 purl, 3 facial, 3 purl, 5 facial, 5 purl, 5 facial, 3 purl, 3 facial, 3 purl, 6 facial
5 row - 5 purl, 5 facial, 3 purl, 3 facial, 3 purl, 6 facial, 5 purl, 6 facial, 3 purl, 3 facial, 3 purl, 5 facial.
7 row - purl 5, interception (1 front, 3 front - back), 1 front, 3 front through loops, removed back, 1 front through the loop, removed forward, 2 purl, 3 front, 3 purl, 2 front, interception , 5 purl, interception, 3 facial, 3 purl, 3 facial, 2 purl, interception.
9 row - 5 purl, 5 facial, 1 purl, 3 facial, 3 purl, 8 facial, 5 purl, 8 facial, 3 purl, 3 facial, 1 purl, 5 facial.
11 row - 5 purl, 8 facial, 3 purl, 3 facial, 1 purl, 5 facial, 5 purl, 5 facial, 1 purl, 3 facial, 3 purl, 8 facial.
13 row - 5 purl, 7 facial, 3 purl, 3 facial, 2 purl, 5 facial, 5 purl, 5 facial, 2 purl, 3 facial, 3 purl, 7 facial.
15 - purl 5, from the next 5 facial loops interception, as described for the 7th row, knit 1, purl 3, knit 3, purl 3, interception, purl 5, interception, purl 3, knit 3, purl 3, knit 1 , interception.
17 row - 5 purl, 5 facial, 3 purl, 3 facial, 3 purl, 6 facial, 5 purl, 6 facial, 3 purl, 3 facial, 3 purl, 5 facial.
19 row - 5 purl, 5 facial, 2 purl, 3 facial, 3 purl, 7 facial, 5 purl, 7 facial, 3 purl, 3 .: purl, 2 purl, 5 facial.
21 row - 5 purl, 5 facial, 1 purl, 3 facial, 3 purl, 8 facial, 5 purl, 8 facial, 3 purl, 3 facial, 1 purl, 5 facial.
23 row - 5 purl, interception (1 front is removed forward to the spare knitting needle, 3 front - back, 1 front is knitted through the fifth loop, 3 front through the loops on the spare needle located behind, 1 front through the loop removed forward), 3 front , 3 purl, 3 facial, 1 purl, interception is performed as the previous one, 5 purl, interception, 1 purl, 3 facial, 3 purl, 3 facial, and intercept again.
From the 25th row, repeat the pattern.

Knit like this to the line of the armhole, then symmetrically close 8 loops on the sides of both shelves.
Knit in the same pattern to the neckline and close the fastener loops. Knit another 3-4 rows and begin to lower the loops along the armhole line, two through the row. close loops

Start knitting the back with a 2x2 elastic band. Knit with an elastic band 6-8 centimeters, periodically trying on a shelf. The height of the elastic must match. In the same way as with the shelves, add stitches evenly throughout the row and continue to knit with the front stitch to the armhole. Bind off 6 sts on each side and continue knitting to the neck. The line is 2-3 cm above the neck line of the shelf.

After closing the loops of the neck line, leave the loops of one half of the back on the cord of the knitting needles and knit the other half to the shoulder. Close the loops of the shoulder line in the same way as you did when knitting the shelf. Break the thread.
Go to the first half of the shelf, tie it to the shoulder line. Close the loops and break the thread.

Related videos

note

The pattern on the right and left shelves is knitted symmetrically.
For convenience, redraw the diagram in a mirror image
The circles indicate the purl loops, the empty cells - the front ones, the triangles - the interception.
To intercept, use an additional knitting needle. The thread must remain at work.

Useful advice

Before you start knitting the product, knit three samples - the front surface, 2x2 elastic bands and the main shelf pattern

Take measurements and calculate the number of loops according to the width of the hips and chest circumference

If you are knitting a vest for a preschooler, repeat the pattern 1 time, and knit on the sides with a garter stitch. If you need a larger vest, repeat the pattern twice.

When knitting products with a set-in sleeve, it is necessary to perform bevel shoulder. This is especially important when making blouses and dresses from fine yarn. In this case, the flaws in the cut are very noticeable, and it is almost impossible to hide them. Such products are best knitted according to the pattern, making an accurate calculation of the loops.

You will need

- untied part of the product:
- Knitting:
- knitting needles according to the thickness of the threads;
- product pattern;
- a sheet of paper and a pencil.

Instruction

Build a product pattern on graph paper. This is more convenient, because it allows you to quickly and accurately calculate the loops for any decrease or increase in the width of the part. Find the beginning on the pattern bevel a shoulder A and draw a straight line L from this point, perpendicular to the midline of the part. Depending on the style, this straight line will either reach one of the points of the neck or the midline. From the point of the base of the neck B (it is where the line bevel a shoulder goes into the neck line) release to the line L perpendicular. Designate the point as C.

Before knitting, make an accurate calculation of the number of loops in the width of the row and the number of rows in the height of the product. Measure all the segments of the right triangle ACB. Calculate how many loops you need to remove and for how many rows. At the same time, keep in mind that you will have to close the loops either at the beginning or at the end of the row, so divide the resulting result by 2. Divide the number of loops intended for closing by this value. If it is not possible to divide completely, close 1-2 loops of the remainder in the first row. If more, distribute them evenly.

To knit bevel possible in two ways. In the first case, at the beginning of the row, close the number of loops obtained by dividing. Knit the row to the end, turn the knitting over, knit the whole row and at the beginning of the next one again cast off the required number of loops. Do the same for all other rows.

Warm vest for 2 years, knitted embossed pattern, an indispensable element in children's wardrobe. On a walk or at home, he will perfectly protect the baby from the cold and at the same time will not hinder movement, which is very important for a little fidget. In order for the vest to retain heat well, it is better to choose woolen or half-woolen children's yarn. She will not "bite" and will easily endure frequent washing.

For a vest for 2 years you will need:

200 g yarn of medium thickness,
knitting needles No. 4.5
and detachable "lightning" 35 cm long.

The product combines two patterns: "rice" and fantasy. The first should be knitted, alternating 1 persons. p, 1 out. n. In the purl rows, the facial ones must be knitted with the purl, and the purl with the facial ones.

A fantasy pattern in the form of embossed rhombuses is performed according to the scheme:

The calculation of the loops is given for a density of 16 p. x 20 p. = 10 x 10 cm.

The vest for 2 years with knitting needles consists of three parts: a back and two symmetrical shelves.

Back

For the back, cast on 53 sts. Work the first 4 rows with a “rice” pattern. It will perfectly replace the traditional rubber band and will not allow the fabric to curl.

Then move on to the fantasy pattern. Knit should be even, without changing the number of loops in the work.

At a height of 22 cm from the typesetting edge, reductions must be made to form armholes. In order for the edge to turn out to be rounded, you need to close 1 time 3 sts on each side, 2 times 1 st.

As a result, 43 sts will remain in the work. They should be continued to knit evenly with a fantasy pattern. When the depth of the armhole reaches 14 cm, all the loops must be transferred to the auxiliary knitting needle and this part should be set aside.

Right and left shelves

Dial 27 p. The shelf is knitted together with the bar, the loops of which are included in the calculation. As on the back, the bottom of the shelf is made with a “rice” pattern. After 4 rows, on the first three loops (not counting the hem), you should continue the “rice” pattern, and on the remaining loops, switch to a fantasy pattern.

The height and decrease pattern for the armhole on the shelf are exactly the same as on the back. Close the loops only on the left side. Further work must be continued until the 30th cm. Here you need to form a cutout for the neck.

From the right edge, close 1 time 5 p., 2 times 2 p., 1 time 1 p. 12 p. will remain on the needle.

When the total length of the shelf is 36 cm, the part must be set aside. After that, in mirror image, you need to connect the left shelf. On it, the strap loops and the neckline should be located on the left edge, and the armhole on the right.

Ruffle, collar, armhole, zipper

Before tying the stand-up collar, you should connect the open shoulder loops on the back and shelves (12 sts on each part). For this, a vertical loop-to-loop seam is best suited. It is practically invisible on the finished product, which avoids a rough thickening on the shoulder. The remaining 18 sts of the back should be transferred again to the knitting needles No. 4.5.

On the edge of the neckline of the right shelf, dial 66 p. (24 from each shelf and 18 p. of the back).

Knit with a rice pattern for 8 cm and close without tightening.

Pick up loops along the edge of the armhole and knit 2 rows with a “rice” pattern. Then close all the loops in one go.

Run side seams.

Sew the "zipper" to the straps.

Turn the outer edge of the collar inward and pin it to the neckline.

A vest for 2 years with knitting needles is ready. It remains to wash and dry on a towel.

Like the product and want to order the same from the author? Write to us.

More interesting:

Step-by-step description of schemes

1. Sleeveless vest with harness pattern

With the right choice of yarn, the model is suitable even for newborns from 3 months.

What we need for work: For the vest we will use wool mixture yarn, 80 grams is enough. Please note that most factories produce yarn specifically for children's things, such threads have the inscription "children" in their name. We will knit with knitting needles 3 mm thick (No. 3).

Description of patterns

In the work we will use two ornaments: the front surface (stocking knitting) and flagella.

Front surface: alternating front and back loops.

Description of how to tie bundles in tiers:

1: hem, purl 1, *4 front, 2 inside*, repeat from * to * to the end of the row, 1 back, hem.
2 and all even levels: knit all loops according to the ornament.
3: hem, purl 1, * transfer 2 ligaments to the auxiliary knitting needle after knitting, 2 external ones, knit the front loops from the auxiliary knitting needle, 2 internal *, repeat from * to * to the end of the row, 1 reverse, edge.
Repeat pattern from level 1.

Back

The initial tier consists of 69 bundles. The main canvas is made in the form of an elastic band (a master class telling how to knit an elastic band can be found on our website) 1 cm * 1 cm high about 3 centimeters. After, we continue to knit according to the description of the “front surface” to the beginning of the armhole (about 14 centimeters from the edge of the product).

To form the armhole of the vest, close the loops according to the following scheme: in the first row, 4 bundles from both ends, in the second, 3, in the fourth and fifth, 1 at the beginning and end of the level. Next, we knit another 9 centimeters of the fabric ornament "front surface". In the next row, close the knots again, this time 17 loops in the middle. Thus, it should turn out that all the links are divided into 2 parts (15 links each). Now we knit each part separately. Knitting the next tier, fasten 5 more loops, knit 1-2 centimeters and fasten all the loops (10 on each side).

Before

Start knitting in the same way as the back, but we replace the pattern with “flagella”. The decrease is done in the same order as for the first part. At a height of 18 cm of the canvas, close 9 loops in the center of the level. Starting from the next row, decrease according to the scheme:

1-2: 3 links from the center;
third: 2 bundles from the center;
fourth: 1 loop from the center.

Continue working evenly until the height is the same as the back of the sleeveless sweater. It remains to close the loops (10 on each side).

Sleeveless assembly

First we carry out the side, then the shoulder seams. To decorate the neckline, we insert the knitting needles into the knots of the edge of the cutout and knit 2 centimeters with an elastic band 1 cm * 1 cm. Similarly, we draw both armholes.

2. Sleeveless sweater with large cells

For the second model, an ornament in the form of large cells is used.

What we need:

Semi-woolen yarn. When choosing yarn, make sure that the thread is soft and does not prick, because newborns have very delicate skin.
Spokes No. 3 and 4;
Hosiery knitting needles No. 3.

Technology Description

As the name implies, the main ornament for the vest is “large cells”. To decorate the armhole of the product, the neckline and the bottom of the vest, the “stocking stitch” ornament will be used.

Back

We start knitting with knitting needles No. 3, we perform a set of 62 bundles. We knit five tiers in garter stitch. In the latter, you need to add 10 loops (in the end, you should get 72 loops). The addition should be done evenly so that the product does not warp.

We change the knitting needles to a larger number and proceed to the “large cells” pattern. When the height of the canvas reaches 23 centimeters, we begin to form armholes. Gradually close the bundles, first 4 on both sides, then in each 2 row once in two knots and one in one (58 remain). According to this scheme, it is necessary to tie the back to the beginning of the neck, that is, until the knitting height is 33 centimeters. To form a cutout, close 18 loops in the center. After we round the neck on both sides: through the level, starting from the second, we close three knots, in the next two, and at the end one (there should be 14 bundles for the right and left shoulders in total). Leave the knots under the shoulders uncovered.

Before

The detail is performed similarly to the previous one. In order for the pattern to match when connecting two parts, after 2 rows in the “large cells” pattern, you should immediately go to the 11th. In this case, the side seam will be prettier. Having reached the armhole, we knit it as on the back. Stepping back 2 centimeters from the edge of the armhole, we knit two middle knots together, we throw the resulting one onto an auxiliary knitting needle or pin. Then separately finish both sides of the neckline, closing in each 2 tiers one loop from the inner edge until we reduce the number of ligaments to 14. Then we knit until we reach the height of the back. The nodes of the shoulder are left open.

Connection of parts

We connect the details of the vest with the inside out. Take an auxiliary knitting needle and throw 28 shoulder loops of a sleeveless sweater onto it - 14 for the right and 14 for the left. In turn, we close the knots, first for one shoulder, then the other. To do this, we knit the front behind the back walls, two ligaments together. By connecting the front and back sides of the vest in this way, we will make the shoulder seam neat and barely noticeable. Now we will use stocking needles, we will make a set of 113 ligaments along the neckline (42 of them along the back, 35 along the neck and 1 loop from the auxiliary pin). According to the scheme described below, we knit from the front side:

the first, third and fifth levels - connect with external nodes;
the second - reverse, while every five bundles we knit two together. To get a check mark neckline, knit three knots together at the corner of the neckline;
fourth - purl similar to the second row;
the sixth - internal, knitting together three knots of the corner;
seventh - we fix the nodes (there should be 78 of them).

We turn to the design of the armhole, first perform this procedure for one sleeve, then for the other. On the edge of the armhole, we perform a set of 60 loops. The first six tiers must be knitted with a stocking stitch ornament. In the final row, instead of the front one, we knit two knots together, we do this three times: at the beginning, in the middle and at the end of the tier. This is necessary so that the edging of the armhole does not bulge. In the seventh level we fix the nodes (there are 57 of them). In the same way we tie the armhole for the second sleeve. We sew the details on the sides, hide the ends of the thread on the reverse side.

We examined in detail how to knit two different models of a sleeveless jacket for a newborn. Perhaps not everything will work out the first time, but over time you will be able to knit more complex products for your baby.

Popular in category: