home › Health › The best DIY valentine ideas. How to make a valentine with your own hands in all possible ways! Do-it-yourself valentine for sister

The best DIY valentine ideas. How to make a valentine with your own hands in all possible ways! Do-it-yourself valentine for sister

Valentine's Day, previously unknown to anyone, is gradually gaining momentum. To make it easier to buy a ready-made postcard, but it’s not in vain that many people think about how to make a valentine with their own hands. A personally made gift is always better than a soulless factory one. Moreover, the simplest techniques are available even to children, and more complex ones will surely amaze the gifted person with their beauty. Dare!

It will serve as a wonderful gift, arranged independently. And, of course, small gifts for and given from the heart.

Although on Valentine's Day the dearest person, wife or husband, can count on something more substantial than a postcard, a valentine will not be superfluous, demonstrating the full degree of love. Well, for friends, classmates, dad, mom, grandmother, God himself ordered to make such small presents - cheap, but with soul.

I will add that even a child can make the simplest postcards, for example, this “palm”, for which you need:

fold a piece of paper in half, put your hand on the fold with the even side
draw outlines with a pencil
cut along the lines, trying to keep the connection of the halves

cut out several hearts at once from red colored paper, 4-5 pieces

attach them, folded together, to the joint inside the resulting palm postcard
connect the inside of the heart with glue to hide the ends of the thread

everything - a simple valentine-palm with hearts inside is ready!

Original valentine using isothread for February 14, 2019

The combination of thread and paper is original, looks unusual, gentle. Even a school-age child can cope with the task, and an additional bonus will be the opportunity to practice the clarity of movements and counting. This valentine is made in this way:

Take: cardboard, adhesive tape, thick thread, scissors, a simple pencil, decorative elements as desired;

a heart is cut out of cardboard (preferably red), you can use a pre-prepared stencil

points are marked with a pencil at the same distance around the entire perimeter of the heart, along the very edge (interval 5-10 mm)
in these places, small V-shaped incisions are made with small scissors

a dense thread is attached to the workpiece on the reverse side with adhesive tape

then it should be carried out through the first incision from the center to the twelfth

there is a space left in the center, which is also better to fill, for this we take a new thread and wrap the heart from the first slot to the twelfth, again from the first to the thirteenth and so on

it remains to decorate the finished woven valentine around the edge with ribbons, bows, cardboard of a different color to get a more interesting design - and the gift is ready!

Making valentines with the kids

It is easy to make a postcard with children, so that later they present a gift to grandparents, teachers, educators. There are several simple options, for example, a three-dimensional paper heart. For him you need:

Take: colored paper, scissors, glue, a regular pencil, a plate slightly larger than a sheet of paper;

lay the plate upside down on a sheet of paper so that the edges go beyond its top and bottom, circle with a pencil

cut along the lines

unfold, in each fold we make three more (that is, we visually divide the resulting stripes into three and fold each part three more times, changing sides each time we fold

fold the resulting accordion in half, mark the middle
We glue the inner edges with glue, glue the two halves.

Decorate a wooden heart with decoupage

Fans of decoupage technique can apply it when creating a valentine. For work, you need to take a finished workpiece, sandpaper, acrylic primer, glue, decoupage napkins, a fan brush, acrylic varnish, paints, ribbons for decoration.

The procedure is:

lightly sand the heart-shaped blank purchased at the needlework store, removing sharp edges

with a sponge, cover the entire surface of the “heart” with a primer, then wait 10-15 minutes to dry and cover, if necessary, with a second layer

circle the workpiece on a napkin and cut along the resulting contour

carefully peel off the topmost layer of paper with a bright pattern from the cut out element, carefully enough, trying not to tear the material

put a file or a piece of dense polyethylene on the table, lay the cut-out napkin on top with the reverse side and grease with glue from the center with soft movements of the brush

carefully transfer the paper onto the workpiece using a file, smooth it if necessary,

slowly remove the plastic

remove excess tissue around the edges, as paper often increases in size when soaking

after drying, cover the workpiece with acrylic glue-lacquer

finish the edges with paint
decorate the Valentine with ribbons, bows, other decorative elements.

Postcard for Valentine's Day using scrapbooking technique

Scrapbooking can be applied not only in the manufacture of albums. It even suits Valentine's Day. A cute, extraordinary postcard can be done like this:

Take: cardboard in two colors, ribbons, beads, lace, rhinestones, glue, glue gun, artificial flowers

take two blanks of cardboard in the shape of a heart, one slightly larger than the other (you can cut it yourself using scissors with curly edges) and stick it on top of each other

cut out rectangles of different sizes and a heart and paste

stick bows of ribbons on a small heart in any shape (the edges are burned with a lighter), pieces of lace, beads, flowers with a glue gun

add self-adhesive rhinestones if desired
glue a piece of pink paper in the shape of Cupid's arrow to the upper right side of the heart on the back side
place a larger heart behind the smaller one, use a clerical knife, an awl, a large needle to make a through hole in these two layers
connect the hearts with a clip (as for clothes), bend the metal strips and cover them with a small piece of paper so as not to spoil the appearance

this is how we get a valentine, which, with the help of an “arrow”, rotates, revealing a dedicatory inscription.

Pendant for lovers on February 14 - quilling to help

A simple, beautiful, but patience-requiring way to decorate a postcard is quilling. The technique consists in twisting thin strips of paper and connecting the resulting rolls with glue to form a specific shape.

So, to make a gift for Valentine's Day, we need:

Buy special paper for quilling, cut it into strips (it’s easier to buy ready-made blanks) of red, pink or other colors;

wind each strip on a base of different diameters, these can be pencils, pens, markers, thick knitting needles
the edge of each roll is smeared with glue to fix the shape

rolls in any form are placed on the workpiece, glued together, but not to the base

when the entire base is filled with circles, and they dry out, a voluminous, transparent heart is ready.

What can be made from paper using origami

I propose to fans of origami to make a voluminous heart, for it you need:

take a sheet of white or colored paper, cut out a square of 21 by 21 centimeters from it
fold the sheet in half

then open, turn over and bend a narrow strip in the upper part

fold the sheet in half again, turn the corner to the middle, on the other hand in the same way

fold the corners in half to the outer edge

unfold, bend the corners to the fold line

bend the leaves with triangles and insert the corners into the "pockets"

insert a pencil into the resulting hole, and then blow air into the cavity, straightening the heart. Volumetric heart for loved ones is ready!

Master class on making postcards from paper and cardboard

From cardboard or thick paper, you can make a unique moving valentine card, which will delight both mom and girlfriend, and many acquaintances. Universal gift!

For this we must:

Take sheets of paper of different colors. For example, rainbows, plus another sheet for the base, white or black, a ruler, a regular pencil, scissors, glue stick, glue, a heart stencil;

circle all the sheets in the form of a stencil, cut out
from the main paper we cut out an even long strip across the width of the heart with a pencil, ruler and scissors

on the edge of black paper, you should attach a “lying” stencil, make marks with a pencil along the contour, draw a line along these marks (we select only the tops of the two halves of the heart
measure 7 mm higher along the strip
The arrow marks the places where the adhesive was applied.

we apply glue only on these pieces with a brush and glue one leaflet at a time, so we get a rainbow from paper

fold the line along the top edge and turn it under

cut a piece of cardboard along the width of the base, glue it on the back of the main part

cut an arrow in the free part of the base
wrap the lower part of the base and the upper part under the heart with a thin strip of cardboard, fasten the edges

Glue the bottom of the rainbow hearts on top
now, moving the upper part along the lower one, we get an inverted rainbow
if desired, a heart with a wish can be glued to the free place on the base when opening.

Video master class - we make a voluminous valentine using the kanzashi technique

Luxurious, like fresh flowers, decorating a kanzashi valentine will not leave anyone indifferent. Despite the apparent complexity, the procedure can be easily mastered by anyone who knows how to work with their hands. Let's go over the process step by step:

You need to take: glue gun, tweezers, scissors, lighter, transparent glue gel, heart blanks, sandpaper, satin ribbons (width 5 cm for large roses and 2.5 for small ones, length about 5-11 cm for each petal) or felt, decorative ornaments, leaves, polystyrene foam for the base;

a piece of tape 5.5 cm long for a small rose or 10-11 for a large one is neatly folded at the corners to one side to form a kind of rhombus, for this the corner is bent at a right angle, pressed, cut off with scissors at an angle of about 25 ° and soldered with a lighter ;
so you should process all the pieces of ribbons prepared for roses
then we take one rhombus, glue it with a gun along a long diagonal, wrap it in a roll with tweezers, additionally fasten one side with fire
we wrap the next rhombus around this bundle, also fastening it with a glue gun
so gradually we get peculiar buds, not forgetting to fasten their lower part with fire from a lighter
in the same way we form all the buds from the prepared ribbons
we take the base, cut it out in the shape of a heart using a stencil, paint it in red, burgundy, white, you can just use your favorite color
with a glue gun we attach buds to the upper flat part, small along the edge, large in the middle
fill in the gaps with artificial leaves (it is convenient to fix with a glue gun and tweezers
the lower part is decorated with rhinestones.

You can watch the video tutorial for more details.

Valentine cards can be so different, but made by yourself, they will definitely demonstrate your attitude towards a person, tenderness, love. It is good for you to celebrate this beautiful holiday, and look for new gift ideas on our blog!

Miniature cards - valentines have become an essential attribute of Valentine's Day. In this master class, we will tell you how to make an original valentine with your own hands. Before we start creating a Valentine's Day card, let's prepare the following tools and materials:

colored double-sided paper in red, yellow, blue and lilac;
strips for quilling;
white cardboard;
scissors;
pencil;
ruler;
decorative stickers;
ordinary threads;
adhesive sticker.

We create the basis of the postcard. We cut out such a blank from white cardboard.

Then fold it in half. We iron the fold line well to straighten all the bumps and creases.

We fold the leaf in half, and then cut out such a heart.

In total, you need to make 6-8 of these mini-hearts.

Apply glue to the fold line of the heart and glue it to the front side of the card.

Glue the rest of the blanks in the same way. Try to glue the hearts as tightly as possible.

Now select the appropriate bow sticker. Glue it to the base of the threads.

Let's start creating the inside of the valentine, create a voluminous garland of hearts. Let's prepare a small piece of thread, and then cut out 6-7 small hearts. We glue the first heart as shown in the photo, thus fixing one end of the thread.

Perform the same action on the other side, fixing the second end of the thread.

Please note that when opening the postcard, the thread should be slightly stretched!

Glue the remaining hearts on the thread itself.

Leave the card for a few minutes to allow the glue to dry completely.

Now we process the contour of the postcard with a paper strip for pink quilling.

In the lower right corner, glue a heart with the inscription - "ILoveYou".

How nice to receive on Valentine's Day, which is celebrated on February 14 and is dedicated to Valentine's Day, a small present in the form of a heart - the so-called "Valentine"! During my youth, such a holiday was unknown in Russia, and we gave gifts exclusively on February 23 - for boys, and on March 8 - for girls 🙂

But the wonderful holiday of St. Valentine, not tied to any political dates and official celebrations, quickly fell in love with many, and became very popular in our country. Give and receive valentines, notice the symbols of hearts everywhere and plunge into the atmosphere of general light insanity - why not?

Appeal to mothers and grandmothers!

If you are young in soul and body, if you are in love, give and accept signs of attention! If you are only young in soul, and the body no longer wants to fit into the atmosphere of a youthful holiday, spit on his grumblings and take glue and paper in your hands - is your body still capable of this ?! Make a beautiful and unexpected valentine with your own hands, show your children and grandchildren a master class, prove that there is still “gunpowder on our street”!

And even though there was no such holiday in our youth, we knew how to make handicrafts better than the current “generation of computer geniuses”. Hands remember!

Of course, you can buy a ready-made postcard. But is it so pleasant for both the giver and the one who receives the gift? After all, spending effort, thinking about who you are preparing a gift for, creating a surprise with your own hands, you experience unique feelings of joy and anticipation - and this is the same, unique atmosphere of a REAL HOLIDAY!

Moreover, such an amazing thing as the World Wide Web offers us many options and ready-made solutions, even in the photo, even on the video, in step-by-step lessons and master classes, with a detailed description and demonstration of the result.

I have prepared such a selection for you today - choose the most interesting version of the Valentine for you and - forward, to creative success!

Do-it-yourself valentine envelope made of paper - we do it with children!

Such funny animals that give valentine hearts can be easily and simply made from plain paper, along with children - I think they will at least not be bored! After all, you can invent and create absolutely any animal - a bear cub, a kitten, a bunny, and even one that no one else has invented before 🙂 Show imagination in the image and accuracy in work - and you will get a wonderful original valentine in the form of an envelope with a secret message for the holiday February 14, and not only!

What to cook:

sheet of cardboard or thick white paper
red paper for a heart
glue
colored pencils or markers or paints
scissors, ruler, pencil

Take a regular sheet of thick paper or white cardboard.
Bend in half, make a fold.
Make a cut along the fold with scissors - we get 2 blanks for our valentines.
Lay out the rectangle as in the photo. Mark with a ruler with a simple pencil 2.5 cm from the vertical edge two points and connect them with a line.
Do the same on the other side. It turns out, a kind of field of 2.5 cm wide.
Now, from above, set aside a line in this way 5 cm from the top edge, putting two points and connecting them with a line.
Everything above the line will be the muzzle of our character. On the side, you need to outline two semicircles - paws with which he will hold the envelope. Draw the paws below the horizontal line, stepping back from it by about 1 cm. Down
Here is such a muzzle and paws of the future dog turned out on a sheet.
We take scissors and carefully cut out all the contours along the lines of the pencil. If you are making a valentine with children, help them cut out difficult places - as in our example, the dog's ears.
We bend the lower part up - corner to corner. We paint the pencil muzzle with colored felt-tip pens or pencils. You can also make an application from colored paper - here only your imagination will tell you how best.
We bend the paws on top and draw claws on them.
From a piece of red paper, cut out a heart of any size you like, and glue it in the center. Be sure to use red - it's traditionally happened on Valentine's Day - for some reason, hearts are always red or pink.
Now we will make an imitation of an envelope - we will draw diagonal lines from the corners to the heart.
Open our valentine envelope and draw lines for writing inside our gift with a colored pencil or felt-tip pen.
You can draw a few hearts - it will be even more interesting. Well, do not forget to write the message itself - after all, any Valentine is a declaration of Love and Friendship!
Here are some funny little animals you can create. Colored parts can be painted or glued with an additional layer of paper of the desired color.

Do-it-yourself volumetric paper valentine - 3D hearts for Valentine's Day.

Very beautiful, voluminous valentine card with 3d hearts. The postcard is beautiful, but quite difficult for possible beginners due to the numerous folds and slots - everything needs to be done carefully, so immediately make sure your hands are clean, press the paper not with your fingers, but with a plastic handle of scissors or another object. You will have to tinker, but we will definitely cope with you, because we have step-by-step photos of the whole process!

To make it, we need to take:

2 sheets of beautiful red paper for hearts
2 sheets of white cardboard (heavy paper) of a standard size
black marker or felt-tip pen for tracing hearts
strips with rhinestones on sticky tape for decoration
a simple pencil, ruler, scissors, double-sided tape (but glue is also possible)

We fold each sheet of cardboard in half, precisely combining the corners so that there is no skew.
We will set aside one cardboard box, we will work with the second - with the base. Lay the folded sheet with the fold toward you and measure a 4 cm high line that is 3.5 cm from the edge. We symmetrically make the same line on the other side. The incision is made exactly along these lines.
Now we remove the concept of two-dimensional space from our heads and move on to volumetric 3D modeling - we bend the fold between the two slots in the other direction. You should get such a design, as in the photo below.
This is the outer side, and on the inside (open our postcard, as you open a book) - it turns out such a step. Did you manage? Wait to rejoice, it's still flowers!
Now let's wrap our step inside the postcard and close it by going to the outside. From the outside, our postcard should look like this. Now we must do a similar procedure with the inner fold of the postcard - set aside from the edges of the fold 2 cm inwards and 3 cm upwards.
We make cuts again along the marking lines.
To make it easier to bend the sheet in this place, attach the ruler to the ends of the cuts and wrap the sheet on the ruler, iron the fold line.

Now open the postcard again and redirect our fold in the opposite direction - to again get a ledge-step on the inside of the postcard.
Do this on the other side - now we should have 3 steps.
At this stage, we could already stop, but we are not looking for easy ways. Let's take another step! Along the inner fold, we again set aside the markings for the last cut - 2 cm from the edge and up.
But we will cut through only one upper fold (and not the entire thickness!).
Thus, we have another upper small step. Phew, you can exhale, then everything will go much easier!
We take our first cardboard box - it will be the outer, front side - we need to attach our “stepped” model to it. It is convenient to do this with double-sided tape, but you can get by with ordinary glue - the main thing is not to pour a lot of it so that our valentine does not wrinkle or warp. We glue both parts and get a smooth cover on the outside and a stepped design inside the valentine. Now you need to decorate it with hearts.
Let's make a heart template - best of all 3 different sizes. Two or three large hearts, many medium and two or three small ones.
Outline our pencil sketches of hearts with a black marker and cut them out with scissors.
Now is the time to show your artistic abilities - beautifully and highly artistically, with the taste of a true designer, you need to scatter our hearts on different levels so that it looks beautiful. If you can’t trust your taste, do it exactly according to the photo, perhaps it will be fine.
It is very convenient to attach hearts to pieces of double-sided tape, but you can also use glue.
Well, this is how it all looks. Everything already looks elegant, but there is no limit to perfection - let's do the last part of the design - decorate with strips of rhinestones.

Here we have such a “heart-strass” splendor! True, there was no place left for text congratulations, but with such an abundance of red hearts, words would probably already be superfluous! What do you think?

“Heart in the palms” is a very simple and quick paper valentine. Can be done with children.

What materials are needed:

red and white paper
glue, pencil, ruler, scissors
pink or red pencil (felt pen)
needle and thread

We take our (or someone else's!) hand with the thumb pressed, put it on a piece of paper and circle it. Cut out the hand stencil.
We bend thick white paper (or cardboard) in half and lay our stencil on the fold line so that the “little finger” is along this line. We cut everything to the fold so that the card can open like a book.
From red, double-sided dyed paper, cut out the same squares, about 6 cm each side. On one of them we make a diagonal fold and draw a half of a heart. This will be our template.
We also bend the remaining squares, fold them one by one and, applying a template, cut out hearts.
We sew the resulting stack of hearts with a fold in the middle onto the inside of the fold of our “palms”, leave a knot of thread on the side of the hearts. Then we will close it.
Glue the halves of the hearts to the palms with glue.
We also glue together the two halves of the uppermost heart, at the same time hiding the traces of stitching.
We circle the “palms” with a pink felt-tip pen, not forgetting to paint on the details inside - folds and lines on the fingers. All! Our voluminous paper valentine is completely ready - you can give your loved one your heart in your palms!

Making this valentine is very simple, but there are some tools that will need to be prepared. In particular, it is difficult to do without a hole punch - to create the same even holes, and special curly scissors, since cutting all these waves by hand on many details is not at all interesting and it will not work out exactly - but the sameness of details and accuracy are important here.

We will need:

pink and white paper
acrylic paints (yellow and white)
glue
green pencil or marker
round head pin
a piece of pretty ribbon
hole puncher
curly scissors

So let's get started!

We “clone” the heart template of the size we need to the number of 7 pieces from a sheet of pink paper.
Glue a pink heart on a larger white sheet.
With the help of curly scissors, we make a beautiful edge treatment, so that a white wavy outline appears around the pink heart, reminiscent of braiding when sewing.
We need 7 pieces of such blanks.
Each heart needs to be decorated with daisies. To do this, take a pin with a round head and, dipping it in yellow paint, draw the centers of the flowers - 3 daisies, as in the photo below. Around each middle, draw white petals in the same way.
With a green pencil we add leaves - two for each flower.
We make neat holes in each heart with a hole punch. We pass a piece of festive ribbon through them.
We tie a bow and cut exactly the edges with sharp scissors.
Our gentle valentine with chamomile mood is ready. It remains to write on the reverse side of the first heart the name of the object of our donation, and on the remaining ones - your wishes, and everything that you would like to convey in words.

Exquisite valentine using the scrapbooking technique - Master class with step-by-step photos.

This is what a closed valentine card looks like.

Turning the paper lever, we open our postcard and there we see a surprise message.

To make this stunningly beautiful and sophisticated valentine, we will need materials that are sold in craft stores or scrapbooking departments (in bookstores). There you can always find all the necessary parts, accessories and tools. It is good that now all this can be ordered directly through online stores.

What to cook:

pink and white paper for scrapbooking (can be used for watercolor, or other thick paper)
semi-beads on a sticky basis
artificial flowers for scrapbooking
piece of lace, piece of lace
rivet with split ends - brads (these are stud buttons with a flat flexible forked leg made of soft metal)
glue and glue gun (can be replaced with colorless superglue)
curly and regular scissors

When everything you need is prepared - the process of creating a valentine heart will not cause us any problems - everything is quite simple.

From plain white paper, we cut out the shape and size of the heart we need.
According to the template, cut out a heart from pink thick paper.
Tint the edges of the heart with a slightly pink pencil, of a darker shade, to visually darken the border.
From red thick paper with a template applied to it, using curly scissors, cut out the blank. Cut out so that the wavy edge protrudes beyond the edge of our template size.
We glue a pink heart on a red blank with a curly edge.
Cut out a rectangle from red paper and glue it on top of the pink layer.
Now cut out a slightly smaller rectangle from white paper and glue it on red.
And on the corner we will glue another small red heart. Our blank number 1 is ready.
Now we will transfer the heart template to red paper with a pencil, but we will not cut it out yet. Our task is to make another red heart, a little smaller than our template. To do this, manually draw another one inside the pencil contour - a little less. On it we will make a crop. This will be the second piece.
This is how it should look like when applying the second blank to the first.
For the second heart, you need to make a decoration-bouquet. Let's start with the ribbon - make two loops and glue them together at the base.
From the lace braid we will make one larger loop and place it at the base, on the bottom layer. Glue this beauty on a heart - place it not in the center, but a little asymmetrically, as done in the photo below.
Now we need 3 flowers. If there is a stalk, cut it to the very root. Attach three flowers to the base of our decoration on the glue gun, covering the cut and fastening points of the braid.
We transfer one half-bead to our heart, gluing them along the edge of the heart.
Now we cut out a “lever” from pink paper - cut a strip of paper in the shape of an arrow, cutting off the corners. Glue on the back side of our second blank.
We combine both blanks and with a sharp knife we make a small hole at the base of the heart.
Pick up our rivet and insert the legs into the hole from the front side.
On the reverse side, spread the legs of the brads to the sides and press firmly against the paper.
So that these legs do not stand out, we close them with an application in the shape of a small red heart.
Check how our "mechanism" works - the top heart should move easily over the bottom, revealing to us a secret message ... Which still needs to be managed to be written on a small piece of white paper. But that's a completely different story... 🙂

Valentine card with moving rainbow hearts - Master class on video.

The fastest and easiest valentine in 2 minutes!

If you “slept through” the whole of February and realized it only on the 14th, when it’s too late to prepare surprises, and you definitely need to give something .. catch a simple way - How to quickly and easily make a valentine out of paper with your own hands in just 2 minutes. This video clip has been going on for exactly that long, and by repeating all the simple steps behind it, you will definitely cope!

Here are the hearts you can draw yourself or download as ready-made templates.

Download stencils of hearts of different sizes (for cutting out of paper) from the link below - they can be printed on any printer, they are selected in the large size you need for printing.

Tricky question!

PS. Please share in the comments examples of your valentines - what did you give or did yourself, and what did you give? And, by the way, I have had an unresolved question for a long time - what is more pleasant - to give gifts yourself or to receive them from other people? What do you think?

In Russia, this holiday began to be celebrated widely and everywhere quite recently, about twenty years ago, but on the other hand, on a grand scale and with pleasure, because this is a great occasion to once again confess your love to a dear person.

Valentines- an integral attribute of St. Valentine's Day, which is celebrated by all lovers on February 14. Nowadays, a card to a lover on this day is called a Valentine. The first valentines appeared in the Middle Ages, when lovers spoke or sang words of love to each other. Written valentines appeared in the 15th century. The oldest of them is exhibited in the British Museum. Paper valentines used to be exchanged instead of gifts. They have gained particular popularity in England. They were made from colored paper and signed with colored ink. Ever since mass production of valentines was launched in 1800, they have become an integral part of the holiday, and now, by the day of all lovers, shops are simply littered with them of various colors and sizes: from small to real masterpieces.

There are many options for valentines - for sure you will come up with them yourself. To make valentines with your own hands, you can use beads and rhinestones, sparkles and pieces of fabric.

One of the Valentine's options will be a beautiful card, decorated with many hearts of different sizes, cut out of velvet red paper in different shades. After these hearts must be glued to a sheet of thick paper folded in half and write words of congratulations. You can sew a red velvet heart by attaching a leaf with a tender love confession to it.

To make valentines, you can use gift wrapping (cut out hearts), stickers, postcards - the main thing is that you will do all this with love and the desire to bring joy to the person to whom it is intended.

Of course, now you can buy a Valentine card with a ready-made congratulation, but it’s still nicer when it’s handwritten in your own words. Valentine cards can contain poems, short wishes, and even comic ones. It can be either a few lines or small compositions that convey the feelings of the messenger.

Thus, you can prepare for the holiday in advance and approach it creatively: make your own valentines because it is always more pleasant to receive a gift made with your own hands and from the bottom of your heart. Do not be shy, experiment, make a valentine yourself - please your loved one!

We offer you an overview of very interesting findings that have been found in the literature and the Internet.

Valentine accordion

Making such an original valentine is quite simple and quick: fold the sheet with an accordion and decorate with hearts, and you can hide notes of love content in the folds of an accordion.

Postcard "Three hearts"

For this postcard, you can use ordinary paper or colored thin cardboard. Cards or magazines with illustrations of flowers, candy wrappers, ribbons, beautiful wrapping paper, colored confetti made by you or bought in a store, etc. can come in handy.

In our case, we will make a postcard that will be put into an envelope. If you do not need an envelope, then you can not stick to special sizes.

1. Select an envelope and cut a strip 5-7mm smaller than the width of your envelope. This will be the base of your postcard. Measure the height of the envelope and set aside 5-7 mm less. It is advisable not to draw with a pencil, but to draw a strip with the tip of scissors. Don't press hard. This strip will then help you easily fold in the right place while leaving a clean and professionally aesthetic edge. Next, you need to set aside two more heights of your postcard. In our case, the height of the envelope is 10 cm, the finished card is about 9.5 cm, so set aside two more times about 4 cm. As in the previous time, do not make stripes with a pencil, but draw a line with the sharp end of the scissors.

2. Fold the card like an accordion, as shown in the picture, its base is ready. Now you need to cut out the hearts. Do them first on a draft. It is possible that right away you will not get the right size and beautiful shape, so you will need to practice. After the shapes and sizes are chosen, don't forget to make two more hearts (one smaller than the other).

3. Decorate the hearts. Here you can fantasize. Glue the hearts in decreasing order on each step. You can sign each heart with tender words or write a love message on each step.

In such a card, the number of hearts can be more than three.

Valentine card "Mouse in love"

Why do we give only hearts, angels and doves on Valentine's Day? What about other attributes? Let's dream up a little and make a mouse in love. Such a mouse can be presented as a Valentine to your loved one. It will turn out a very original and unusual gift for Valentine's Day.

To create such a valentine, you need red paper or any other, scissors, glue, a small pompom for the mouse's nose.

Valentine card ″Amulet″

This valentine can be made by hand, it is a heart-book in which you can write a confession for your loved one. It can also be worn around the neck as an amulet. It will make a very original gift for Valentine's Day.

Valentine card "Nostalgic"

For her, you will need your joint photos, a sheet of white cardboard, glue, scissors, a felt-tip pen.

1. Cut out images of your joyful faces in different ways - diamonds, circles, squares, triangles - and fold all the pieces like grooves.

2. Cut out a heart from colored (red or pink) cardboard.

3. Stick photo fragments on one of the sides

4. Inside the heart, write your wish. For example: "Keep this heart and remember us always! With love on Valentine's Day - yours forever - me!"

Valentine's card "Winged"

This is easy to do! It turns out the message "flying on the wings of love."

For it you will need white and red cardboard, scissors, glue, marker.

1. Cut out a scarlet heart. 2. Draw wings on paper and cut out with scissors

3. Glue the wings to the heart. And on top of them is another similar heart so that the tips of the wings are not visible.

Valentine card "Merry"

For her, you will need a white sheet of cardboard, felt-tip pens or pencils, a red paper heart, scissors or a blade.

Draw a wreath or someone else (optional).
Cut with the blade where you marked with a fat marker.
Separately, make a heart and insert it into the paws of the lion cub.

1. 2.

3. 4.

Valentine ″ Tied-tied″

From a sheet of cardboard, bend the future postcard, and close the "entrance" with a heart and tie it with a ribbon. Inside is a secret, it must be guarded.

Valentine ″ You and me ″

You can stick your photos on the back of the hearts.

Wreath of valentines

You will need cardboard, tape, colored paper, glue, scissors.

Cut out a circle from cardboard. This will be the base on which the hearts cut out of paper are then glued. Please note that if the colored paper has an ornament or a geometric pattern, your project will greatly benefit from this. If you can't find colored paper with a finished design, make an appliqué over the cut out heart. When the wreath is ready, as a final touch we tie it with a ribbon.

Valentine card with heart in hands

This is a 3D valentine in the form of a postcard. If you open it, then hands will appear, giving you the heart of a loved one.

Use a ruler to draw straight lines at the top and bottom of the drawing. And then cut along this line from the edge to the beginning of the pattern.

Using the notches at the top and bottom as guides, fold the paper over and staple the halves together.

Carefully cut out the blank and fold it as shown in the photographs.

A greeting card with a declaration of love is ready.

Wicker hearts and leaves

1. In order to make each wicker leaf, pick up paper in two contrasting colors (double-sided is better).

2. First, build a pattern. Draw a square with a side of 4-12 cm. (The optimal size, convenient for weaving, is 8 cm). Place the leg of the compass in the middle of the upper side of the square and draw a half circle with the same diameter. Divide the top and bottom sides of the square into 8 pieces. Now, if we draw lines at equal distances, and then weave, we will get the familiar plain or checkerboard weave. But let's try to make an unusual weaving. Draw lines, making the middle stripes twice as wide as the rest.

3. Lay sheets of paper in two colors on top of each other. The pattern can be drawn directly on one of the sheets. You can also draw on a separate sheet or print a template. You need to cut two or three sheets (with a template) at the same time. You can use staples to keep them from moving.

4. Place one blank on top of the other. Pull out one work strip (yellow) and place it on top. Pass it between the red stripes, weaving in a checkerboard pattern.

5. When you bind all the strips, gently pull them up, trying to make sure there are no gaps. Now, with a glue stick, glue all the ends of the strips on both sides.

6. Trim the edges. It turned out to be a perfect heart. To turn it into a leaf, cut out the cloves along the edges (one at a time or with curly scissors) and glue the leg.

7. You can make the pattern differently, leaving the two extreme strips wide.

8. This is how leaflets with plain weave and stripes of different widths look like.

9. Try changing the shape of the strips. Divide half of the upper side into 4 parts, and the lower side into 5. Connect the dots with raised lines.

10. It turns out such a sheet.

11. Draw two pairs of lines concave towards the middle.

12. The leaflet will be like this.

13. Divide the top and bottom sides of the square into 9 parts, and the two sides in half. Draw three convex lines.

14. After weaving, you will get a pattern with a volume effect.

15. Divide the horizontal sides into 8 parts, and the vertical sides into 4 parts. Draw identical arcs between the points of intersection of the lines.

16. The pattern is unusual.

17. Divide all sides of the square into 4 parts. Use a compass to draw 4 semicircles in the marked places. What do you think the pattern will be after weaving?

18. You will get a flower with four petals inside the leaf.

19. Divide all sides of the square in half. Draw the middle lines. Divide all sides into 5 parts and draw auxiliary lines. Draw straight lines and draw semicircles on the markup.

20. The pattern on this leaf is a flower inside a flower.

21. Divide the top and bottom sides into 8 parts, and the sides into 2 parts. Draw two diagonals. The intersections of the diagonals and vertical lines indicate the points from which the corners are built in the center of the pattern. If you make a pattern in the shape of a heart (completed with another semicircle, as shown in blue) and do not cut the right side of the square, then after weaving it will turn out ...

22. It will turn out such a figure, resembling a flower, with a wicker core.

23. And finally, one more example. Divide the top and bottom sides into 8 parts, and the sides into 4 parts. Use a compass to draw semicircles that form wavy lines.

24. Isn't it an unexpected result?
Experiments with figured weaving are extremely exciting, they can be continued further ... Try to come up with your own shapes!

Volumetric Valentine.

This is a simple three-dimensional postcard - Valentine's card for Valentine's Day. It is easy to make and is suitable for art lessons with young children.

Materials:
White thick paper, red paper, glue

How to make a postcard:

Cut out the card itself from white paper.
Fold the red paper like an accordion and cut out hearts.
Glue the ribbon of hearts to the card.
Sign the Valentine card and you can hand it.

If you want to please and surprise your loved one, then a Valentine card made by yourself is the best gift!

Nothing is appreciated by our loved ones like our attention and care. A beautiful handmade Valentine's card for February 14 will tell your loved one about your feelings. Of course, you can always buy a ready-made postcard, simply putting a hand-painted on a ready-made factory stamp. However, an original, handmade valentine will simply melt the heart of your loved one. To make such a gift, you do not need very expensive materials. Paper, paints, markers, beads, ribbons and glue will be enough - the main thing is that you have enough patience and accuracy. You can also make a valentine together with your children - your beloved brothers, sisters, grandparents. You probably want to give a friend or soul mate something unusual, for example, a voluminous valentine with your own hands. Here you will find the most unexpected, albeit very simple ideas for making mini postcards. Step-by-step master classes will help you make a pleasant surprise for a friend or loved one.

A simple do-it-yourself paper valentine with children - A master class on making a postcard for February 14 with step-by-step photos

Making the simplest Valentine, you will spend no more than half an hour. Be sure that your gift for February 14 will take pride of place on the shelf of a person dear to your heart. The simplest postcard for Valentine's Day is a sheet of multi-colored cardboard folded in half, signed with words about love and fidelity. However, we want to offer you something more original and elegant, but still just as easy to make. Having decorated a sheet of cardboard folded in half with bright hearts, you will get a wonderful Valentine.

Materials for an original paper valentine with paper hearts

To make an original valentine decorated with hearts, you will need:

Cardboard white and red;
Simple pencil;
colored paper;
PVA glue or glue stick;
Scissors;
Sequins, beads, beads, jewelry.

Instructions for making a valentine with paper hearts with a photo step by step

How to make a paper valentine with kids - Step by step tutorial on how to make a stencil

A very unusual, but easy-to-make valentine, created using a stencil. By applying a stencil in the shape of hearts or a flower to the base, you will create a funny, romantic background for the card - a ligature of silhouettes of drawings. Make some of these cute presents with your children for February 14th.

Materials for children's paper valentine

To make unusual valentines made using a stencil with your own hands, you will need quite a few materials, a little patience and freedom of imagination.

You will need:

Thick paper of different colors;
Simple pencil;
Glue stick;
PVA glue;
Scotch;
Spray paint (aerosol);
Watercolor or acrylic paints;
felt-tip pens;
Decorations.

Master class with step-by-step photos on making a stencil valentine with children

Do-it-yourself voluminous valentine from corrugated paper and napkins "Bouquet of roses" - Step-by-step master class with a photo

Do-it-yourself voluminous valentine looks very unusual. Such a "3D" postcard will be a pleasant surprise for your loved one on February 14th. If the idea of decorating a homemade valentine with a bouquet of corrugated paper roses or even napkins seems complicated to you, the detailed instructions of the master class for making it will dispel all your doubts: it's easy to do!

Materials for a voluminous homemade valentine

You will need:

Corrugated paper or multi-colored table napkins;
PVA glue;
Green cellophane;
felt-tip pens;
Pencils.

Do-it-yourself voluminous valentine from corrugated paper or napkins - step by step photos about

Original do-it-yourself valentines - The coolest postcards for February 14

Try to make something more original - it is not necessary to repeat the creations of other people. For example, lay out a heart or a flower from coffee beans, attaching them to paper with glue, or even give your soul mate a picture of coffee in a frame on Valentine's Day.

Decorate a postcard for February 14 with multi-colored voluminous hearts made from “petals” of paper. Give such a surprise to your soulmate.

What can you say about such an unexpected Valentine? Its size is only limited by your imagination!

How to make a valentine with your own hands

First you need to decide on the material for the Valentine. The most affordable and easiest option is colored paper. But you can get more creative with your Valentine and try making it out of fabric, wood, plastic, or clay. For decoration, you can use rhinestones, beads, multi-colored pebbles, lace, fresh flowers.

After you have chosen the material, you need to think about the shape of the valentine. Most often choose cards in the form of a heart - a symbol of love. But if you have already decided to be original, then you can make a valentine in the form of a candy, a pair of doves, an appetizing cupcake, a voluminous flower. Do not hold back the flight of your imagination, and romantic feelings will tell you what exactly your ideal Valentine should be.

Beautiful valentines do it yourself

We offer you some ideas for beautiful handmade valentines.

DIY valentine: button heart

You will need:

small and medium buttons in red, pink, white
colored cardboard or thick paper
scissors
thin red ribbon
simple pencil

Step-by-step instruction

Take a piece of cardboard and fold it in half like a booklet.
On the front side of the card, draw the outlines of the heart with a simple pencil. As you may have guessed from the name, we will fill it with buttons.
Carefully lay out the heart with buttons planted on glue. Let the glue dry.
Glue pieces of tape around the edges of the card, making a frame.

Handmade valentine card: voluminous hearts

You will need:

colored paper or pieces of gift wrapping
red cardboard
scissors
beads

Step-by-step instruction

Cut out 4-5 hearts of different sizes from colored or gift paper. They should be the same in shape, but differ literally 1–1.5 cm in diameter.
Fold a sheet of cardboard in half and carefully cut a large heart out of it. It must be connected on one side to make a postcard.
Fold the colored paper hearts in half, pattern inside.
Glue the largest heart on the front of the card first. Apply glue only to the middle of the workpiece so that you can bend the edges.
On top of the first heart, stick a smaller one in diameter, also leaving the edges free. Then repeat the procedure with the remaining blanks. You should get a voluminous multi-colored heart.
Decorate the card with beads and rhinestones attached with glue.