Print paper star template. Stencil of a five-pointed star a4 format

Do you want to decorate your home, classroom, desktop, Christmas card or need a little surprise? Try to make a paper star. A beautiful star will decorate any celebration! In this article I will show and tell you how to make a star out of paper. Choose which star you want to make. I will offer many ways to make simple and voluminous stars.

What do you need to make a star?

If you decide to make a paper star, then you will first need paper. It could be:

• cardboard,
• plain white paper,
• foil paper,
• colored origami paper,
• newsprint,
• scrap paper, etc.

You will also need: glue, scissors, jewelry (sequins, beads) and a little patience.

How to make a big voluminous star

A large three-dimensional star is good for decorating rooms or a Christmas tree. For such a star, you will need thin cardboard or thick paper.

1. Download the templates from the link - print and cut out the necessary blanks from cardboard. You will need to make 2 sheets with template #1 and one sheet with template #2.
2. Cut out templates, bend them along the dotted line.
3. Assemble all 5 pieces with glue. You will get a five-pointed paper star.

Such a star looks good from music paper, foil paper or thin shiny cardboard.

You can decorate the finished star with glitters, sparkles or special paint.

How to make a paper star

A simple but spectacular star can be made from plain paper. The star turns out to be voluminous and beautiful. You can make several of these stars and hang them on a thread. These stars look good both on the Christmas tree and just in the room.

Star template -

Cut out 2 stars from paper, bend them along the given lines and glue them with an offset, as shown in my video. You will make a wonderful star if you use beautiful colored or shiny paper.

How to cut a star out of paper

Sometimes we need a pentagonal star. It can be pasted on a postcard or a poster. To cut out such a star, you just need to know the paper folding technique.

Watch my video tutorial on folding such a simple star and you will learn right away!

How to make lucky stars from a strip of paper

Did you know that stars can be folded from a simple strip of paper? These funny little plump stars are commonly referred to as "stars of happiness." They are very easy to assemble. And needlework stores even sell ready-made cut strips of different colors and patterns for these stars.

Folding stars of happiness is very easy. Take a strip of paper, tie a knot at the end and begin to fold the strip. Then hide the remaining tail and slightly push the figure.

You can watch my video tutorial on how to fold these cute little stars.

Small stars of happiness can be strung on threads and you get a whole curtain - such a rain of stars. You can make a bracelet or earrings out of stars. And also just pour the finished figures into a beautiful bottle, vase or just a gift bag.

How to make an origami paper star

A very beautiful three-dimensional paper star will turn out if you make it using the origami technique. This beautiful star looks great both on the Christmas tree and on a gift.

Of course, for beginners in origami, it will be a little more difficult to fold it, but if you have patience and a great desire, then I believe that you will definitely succeed in this star.

See my master class on making a beautiful paper star:

How to make a star out of old books or newspapers

An interesting star can be made from sheets of an old book or newspaper. Each individual lstick is twisted into a thin bag, which then needs to be fixed on a cardboard blank in the form of a star.

Please note that the pages of the book will require a lot))

To decorate such an original star, you need to cover the tips of each element with sparkles. To do this, dip the bag in PVA glue and then lower it into a box of sparkles. Stick all the bags on a cardboard blank - in the end, you will get a big newspaper star.

But, in my opinion, it is still a decoration in retro style. But you might like it.

Stars glowing in the dark

Adorable paper stars that glow in the dark can be easily made by hand. To do this, you need to cut holes in the template. It can be small stars, rhombuses, or some intricate pattern. Next, in each star you need to place a garland light bulb. Every house has an old working, but not very pretty garland. Why not build luminous stars out of it?

We place the light bulb in the star and glue the template. It remains only to hang this beauty and wait for darkness.

These glowing stars look just awesome!

How to make a paper star of Bethlehem

Often, for matinees and holidays, you need to build a Bethlehem star. This is an 8-ray star and it is quite easy to make it out of paper.

You just need to download and print the template and make several blanks from paper, each time slightly reducing the size. Then you have to stick the stars on top of each other and decorate them.

You can decorate the star of Bethlehem with sparkles, rhinestones, beads and other materials. To the top you need to attach a lace or ribbon.

How to make an openwork star kusudama

In addition to ordinary paper stars, there are openwork slotted stars of kusudama. This is a star-ball, made in the technique of vytanki. A paper template for such a star is first cut with a clerical knife or small scissors, and then all the details are glued into a ball. This piece looks just amazing!

You can even come up with your own openwork pattern for kusudama.

I hope you will definitely like paper stars and make the most beautiful star out of paper!

A paper star will not only become a home decoration on the eve of the Christmas holidays, it is suitable for educational activities with children. A do-it-yourself voluminous paper star is made quite simply, while joint lessons will help develop the child's imagination and his motor skills.

An ordinary sheet of paper can be a suitable space for creativity. Having given it the desired shape, the craft can be decorated by painting with felt-tip pens, paints. Fantasy and sleight of hand will help the kid create a masterpiece. And how to make a three-dimensional star out of paper, this article will tell.

Necessary materials and tools

All the tools and materials that may be useful in the work can be found in everyone's home. Therefore, absolutely anyone can do this work. To create a star you will need:

• paper;
• protractor;
• compass;
• scissors;
• simple pencil;
• decorations.

Instructions for creating a three-dimensional star

They start making crafts by choosing paper. For work, you can use both a regular sheet and bright multi-colored paper. A do-it-yourself voluminous paper star can be made of durable paper; in this case, the craft will come out quite dense, and it can be used as a decorative decoration for a room or a Christmas tree toy.

On the back of colored paper, you need to draw a circle, the diameter of which will correspond to the size of the star. For these purposes, a compass is suitable, but if it is not there, then you can use a saucer or other round object. After that, you need to draw a line from the edge to the center of the circle.

At the second stage, a conveyor ruler will come in handy. With its help, from a straight line, you need to mark an angle equal to 72 degrees, and draw a line. Thus, it is necessary to mark the entire circle - you get five lines.

The next step is to connect all the lines into a star. In the center of the part, you need to draw additional lines as illustrated in the picture. After that, the asterisk must be cut out and bent along the main lines so that the drawing looks inward. If thick paper was used in the work, then the folds should be worked on much more carefully so that they are as pronounced as possible. For these purposes, you can use any blunt object (ruler, back of a knife, etc.).

Do-it-yourself voluminous paper star is done quickly enough. In conclusion, you need to make a small loop so that a beautiful craft can be hung on a Christmas tree or somewhere else.

double volume

This option is a continuation of the first instruction, which tells how to make one convex part. This master class will tell you how to make a double volume.

According to the previous example, two similar elements should be performed. A template for a three-dimensional star made of paper is presented below. Its difference lies in the fact that there are additional elements designed for gluing parts.

The elements cut according to the template must be shaped and glued according to symmetrical additions. It remains to wait until the glue dries, and the volumetric paper will be ready.

Star from book pages

And although this star looks very beautiful, many may not be happy with the fact that they have to ruin books. This is not necessary at all, because they can be replaced with old magazines, newspapers or technical publications.

When thinking about how to make a three-dimensional paper star, you should first of all take care of the materials and tools necessary for work. You will need a voluminous paper star, it can be made by following the master classes presented above. In addition, you need to prepare scissors, glue, as well as an old book.

The first step is to make a lot of paper bags. For each of them you need a paper rectangle equal to one fourth of a book page. When a lot of details are ready, they must be glued to a paper star as shown in the photo. In conclusion, a little glue should be applied to the bags and sprinkled with glitter crafts.

Do-it-yourself voluminous paper star is made quickly and easily. To make it a wonderful decoration for a room, a Christmas tree or a gift, you can experiment with colors and sizes. Such elements can be fastened together using threads, glue or double-sided tape.

What a beautiful starry sky! Millions of small lights burn in the vast sky, forming the most unusual constellations. What are stars? These are not just points in the sky, in fact, they are special planets, heated to such a temperature that they are able to radiate a large amount of light and energy. Following the instructions on how to make a star out of paper, it is not difficult to create such beauty with your own hands. We can say that stars are flares, but what kind? The time during which they emit light is different for each. Surely, everyone is familiar with sparklers - you light them, and small sparks are sprayed on all sides - also stars. They glow for a short time - a second - and there is no longer a flash.

It is worth comparing the Sun - the closest large star to the Earth. How much light and heat it gives to the living planet! Millions of years will pass until it goes out, but now every creature lives thanks to the energy of the Sun. What a pleasure it is to watch the bright sun reflecting from the mirror-like snow sheet in winter, to bask in the spring under a warm May ray or sunbathe on a sandy beach on a hot day! In autumn, the orange sun seems to merge with the golden leaf fall. On a bright day and the mood is excellent, which cannot be said about cloudy weather. They say it's dark at night without the sun. But what about the Moon? No, this is not a star, but the light that it gives off is the rays reflected from the Sun, which has gone beyond the horizon.

constellations

Not only the Moon pierces the darkness of the night with light, there are other stars - those very visible points that burn brightly high above. Thanks to ancient astrology, modern astronomy and other "cosmic" sciences, 88 constellations are currently known, 47 of which were discovered many centuries ago. Constellations are groups of stars located in celestial space so that from them the human imagination could recreate the images of certain figures. In each group, the brightest, less bright and dimmer stars are distinguished. In ancient times, they were given great mystical (cult) significance, they belonged to different religions, superstitions, deities. Some of these ideas have survived to this day, however, the impact on a person’s fate is described by more realistic methods of biological and psychological influence, a vivid example of this is modern astrology. Why do you need knowledge of the constellations? Having made such a decision on how to make a star out of paper with your own hands, you can dream up by folding the completed elements into familiar shapes or, for example, create your own composition of the night sky.

paper star light

Stars in terms of beauty attract people with their bright light. Raise your head - and thousands of rays simultaneously capture visual perception - so that your head is spinning in pleasant delight. When inventing how to make a star out of paper, a person was guided by the desire to create an image, a likeness of heavenly bodies, from ordinary material available to everyone. Light - rays streaming from the main source, the representation of these rays - sharp tips extending from the center of the paper model. A regular star is a group of beams of equal size (including volume). However, for the sake of diversity, there are models with a different number of branches that differ from each other, following the prompts of your imagination, it will not be difficult to make a beautiful interesting star.

Application of crafts

Well, how such beauty cannot but affect the most solemn holiday of the year. The New Year tree - the main beauty of the evening - was honored to wear a bright star on top, like a crown. This emphasizes the special significance of a coniferous tree among other New Year's attributes; fluffy spruce paws are also often hung with asterisks. So the forest princess becomes simply irresistible in her appearance. Following the example of how to make a paper star for a Christmas tree, everyone can make similar decorations and dress up a green beauty.

In addition to the Christmas tree, the star is used as decoration in other cases. Beautiful crafts serve as an addition to the interior, festive clothes (for example, to a children's party), magnificent small paper sparks are used for various celebrations.

The red five-pointed star is the hallmark of the Red Army. On the eve of February 23 (or another military holiday), the boys are invited to do their own crafts using a glued three-dimensional star. This will emphasize the firm attitude of the growing strong half to the male military duty to defend their family and homeland. The craft will be a great gift for dad, uncle or grandpa on a suitable holiday.

volumetric star

Instructions on how to make a three-dimensional paper star will help you quickly and easily complete this craft.

To work, you need to prepare paper (of any chosen color), a compass, a protractor, scissors, a pencil, a ruler.

1. On a sheet of paper, using a compass, a circle of the selected radius is drawn (the length of each of the rays of the star depends on the length of the compass solution).

2. A radius is drawn anywhere - a segment connects the center (the point of the compass needle) and any point on the circle.

3. The star, in this case, is five-pointed. 360 degrees of a circle are divided by five, as a result, there are 72 degrees per ray. If a different number of rays is required, the circle is divided accordingly (4 rays - 90 degrees, 6 rays - 60 degrees, 7 rays - about 52 degrees, etc.). A radius is drawn every 72 degrees.

4. The length of the sides of the rays is determined by the following action. Points are marked on each radius at the same distance from the center. The greater the distance, the shorter the rays.

5. A perpendicular is drawn through each indicated point - from one edge of the circle to the other.

6. Segments are drawn from the center to each point of intersection of the perpendiculars.

7. The figure is cut out along the outer lines of the depicted star.

8. Volume is created by subsequent bending along short segments inward and outward along the central lines of the rays.

Volumetric star is done!

double volume

The previous instruction on how to make a three-dimensional paper star contains information for making a convex part on one side of the bounding plane. This example will show you how to do double volume.

1. Following the example of the previous instruction, two identical elements are performed - five-pointed stars. However, here, in addition to the main outer surface, elements will be needed to connect the two parts into one figure. These are special "ears" that complement the shape from the sides of the rays. The figure can be cut according to the printed pattern.

2. Embedded elements are similarly given a three-dimensional shape.

3. The design is glued along symmetrically cut additions.

4. Glue dries.

Double star in volumetric form is ready!

Star

The following instruction offers to execute a simple small asterisk.

1. A thin strip (1-3 cm) is cut from a sheet of paper of any color (preferably dyed on both sides) along the entire length of the sheet.

2. The strip is neatly tied into a loose knot in the middle and slowly tightened (just as carefully so that the paper does not tear).

3. The paper on all the loops of the knot must be pressed along one plane (putting it on the table, iron it on top).

4. Turning the pentagon in the middle (knot) to any side, you need to find the part of the strip that goes on top. The protruding end, located at its edge, must be placed on it and tucked shortly, tearing off the excess part.

5. The second end wraps evenly around the remaining pentagon, wrapping around each face it encounters. It is not scary if the end is long and it will take a long time to wrap. This is a positive moment in the further creation of volume.

6. Having reached the end, the end of the strip must be tucked under the nearest overlay (if necessary, tear off the excess).

7. The angle of each vertex of the flat pentagon is compressed with fingers perpendicular to the surface.

It turns out a little interesting star!

Origami

The following method will also tell you about creating a three-dimensional shape, how to make an origami star out of paper.

1. A square sheet is cut out of paper. The square is folded in half. The corner of the rectangle rises from the fold to the upper length and unbends, similarly - another corner of the same width.

2. The bottom corner of the opposite width comes to the center of the intersection of the last folds. Further, the same corner is pressed with its side against a new fold.

3. The lower right corner of the rectangle goes to the last oblique fold.

4. The imaginary large half bends back to the smaller one.

5. The upper part of the resulting figure is cut off so that the cutting line is approximately equal to the new smaller side. It turns out an isosceles triangle.

6. The whole figure is revealed. A massive star is forming.

Origami: method number 2

This origami-style instruction will tell you how to make an eight-pointed star.

To work, you need several square sheets of paper and sleight of hand.

1. One of the squares is bent in half diagonally and turned back.

2. The upper sides are applied to the resulting fold line.

3. The lower sides also rise towards the middle.

4. The upper corner obliquely bends down and turns back, similarly at the same angle - to the other side.

5. The figure is turned upside down and upside down at the same time. The upper corner folds convexly, and the lower one follows it up along the upper oblique folds.

6. Similarly to the received part, 7 more blanks are made.

7. The blanks are connected: the small corner of each next one is inserted inside the large corner of the previous part.

It turns out a great eight-pointed figure! You can also try such work as making a star out of rubber bands, this type of craft is more complex, but no less interesting.

For many years, the five-pointed army star has been a symbol of two wonderful holidays, such as February 23 - Defender of the Fatherland Day, and May 9 - Victory Day. This symbol is used in the symbols of the army, with its help they designate the rank of a military man. The five-pointed star is essentially a symbol of the era and the great state. Therefore, I suggest you learn how to make this beautiful symbol - a three-dimensional paper star.

To make a star, we need:

• The template with which the whole process will go;
• Colored paper or cardboard;
• Glue;
• Scissors;

Cut out two pieces according to this pattern. You can print it out or draw your own. The color of the parts may differ, this must be done from thick colored paper or cardboard.

The red lines show the gluing sites. The dashed line indicates the folds. To bend the parts in these places, you need to resort to a process called creasing, but simply punching. We take for this not a writing rod from a ballpoint pen, but it is even better to do this with the edge of an ordinary teaspoon. We apply the ruler to the dashed line and push the fold line with our tool, after which we carefully bend it, as a result of the manipulations done, we should get what is shown in the photo.

we bend the gluing points and coat them with any glue, you can use glue stick, in this case, unlike the use of PVA, our paper or cardboard will not get wet and will not deform. We glue them.

In the example, the halves of the star are made from different colors.

Volume star from two sheets of paper

This option is the most simple one you can think of. In order to make a star by February 23, we will again use colored paper or colored cardboard, however, in the case of the latter, it is worth looking for double-sided colored cardboard for you.

We cut out the star according to the template, or draw it with our own hands, I will tell you how to do this at the end of the article.

The red line indicates the cut that is needed in order to connect the two crafts into the final result.

On the second part, the cut will not go from top to bottom, but from bottom to top.

We join the parts by introducing them into each other with cuts.

All this will look even better if you decorate them with satin ribbons or glitter.

How to draw a beautiful and neat five-pointed star with even rays

For this we need:

• Compass;
• Pencil;
• Ruler;

I will write down the next steps step by step:

We draw a circle of such a diameter that the star inscribed in it corresponds to the size of your future craft.

Then we draw a line AB through the center, and a perpendicular to it.

To draw an exact perpendicular in the middle, you need to draw two semicircles from points A and B whose radius is greater than the radius of our main circle, as a result, these two semicircles drawn from two diametrically opposite points intersect, draw a line through the intersections of the circles.

Let's denote the point of intersection of the perpendicular lines as point O. We divide the segment AO in the same way as we described above, we get points E in the middle of the segment AO.

From point E we draw a circle whose radius will be equal to the radius CE, that is, we put the tip of the compass at point E, and the writing part at point C, and with this radius we draw a part of the circle that intersects with the line AB. At the place of the serif, we put the point F. EF is the radius we need, equal to the length of the side of the inscribed pentagon in the circle.

Next, we take a radius equal to EF with a compass solution and from point C we make a notch on the circle, then we put the tip of the compass at the intersection of the notch and the circle, after which we repeat this procedure 5 times, as a result of which you should return back to point C. Mark in places intersection of the circle and the point serifs, erase everything except the points. Now it remains for us to connect the dots so that we get a five-pointed star, the second option is to connect the dots so that we get a pentagon.

Conclusion

Making decorations for the holidays of the Victory and Defenders of the Fatherland out of paper is not at all difficult, because even a small child can handle it. This article will help you learn how to make such crafts for children. I also advise you to watch a few videos on which people make such stars with their own hands. By the way, in addition to the patriotic motive, our crafts can serve as decorations for children's rooms, they will look amazing if you hang them under the stream, painting them with sparkles or fluorescent red, which will give your child a real starry sky, which you will make yourself with minimal manufacturing costs.

Video

When decorating a Christmas tree or a room for the New Year, it is impossible not to remember such a decorative element as a star. You can decorate the top of the Christmas tree or even the entire Christmas tree with it by hanging a lot of stars on a thread. And you can add a festive mood by decorating the room itself with paper stars.

Volumetric paper star - step by step instructions

A three-dimensional star can become a beautiful decorative element for decorating the top of the Christmas tree. And by making it from beautiful paper and adding sparkles, you will get a really original star.

Necessary materials:

• paper or semi-cardboard
• scissors
• ruler
• simple pencil
• stationery glue

Main steps:

How to make stars from colored paper - step by step instructions

If you need to make more than one star, but a large number, and even in the shortest possible time, then this master class will help you. Such Christmas decorations can be made with a child, because they are easy to make. For convenience, you can print a star template from the Internet on the selected paper, and then quickly cut them out with the baby and connect the parts together. For the reliability of the design, the stars should be fixed with clerical glue.

Necessary materials:

• colored paper or semi-cardboard in different shades
• scissors
• simple pencil

On a note! Do-it-yourself voluminous paper stars are very easy to make. To create such decorations for the Christmas tree, you cannot do without colored paper, but it is best to take decorative paper with New Year's or winter elements. But if you still decide to take paper or half-cardboard, then pick up material of different shades and be sure to double-sided.

Main steps:

A simple do-it-yourself paper star - step by step instructions

If you need a flat paper star, then you can make it using the origami technique, as in the master class we prepared. It is easily assembled from simple paper squares, which allows you to make crafts for the New Year in the shortest possible time. For better reliability, you can apply a drop of glue to each element, which will allow the star not to fall apart into separate parts and elements.

Necessary materials:

• two shades of colored double-sided paper
• stationery glue
• ruler
• scissors
• simple pencil

Main steps:

OTHER

Thinking about what to do with the kids in labor classes for International Women's Day? Take advantage of our…

Nowadays it is difficult to surprise a person, but it is possible. To make a non-banal congratulation for a wife, husband, sister or mother, ...

Sometimes there are times when you need a three-dimensional paper star. Whether it's New Year or Defender of the Fatherland Day. BUT…

Stars have always played a special role in our lives. In ancient times, they found their way home and oriented themselves ...

Origami is an amazing Japanese art, which results in the creation of unusual crafts from plain paper.…

Children differ from adults, perhaps, in that they always sincerely believe in a dream. Think back to your childhood. You…

New Year is one of the most comfortable and interesting holidays. Some people prepare for it for a long time and creatively, using ...

We make bright boxes with our own hands, a master class. Buying or making a gift for a loved one with your own hands is still ...

We tell you how to make an origami heart with your own handsThe origami technique is magical: with its help you can do not only ...

Such a figure as a five-pointed star has many meanings in different cultures. Mentions of this symbol are found in Europe, and in the Middle East, and even in distant Africa. In paganism, it denotes the unity of the four elements and the human principle, in Islam (together with the crescent) it symbolizes the prophet Muhammad. And in the twentieth century, it was the red five-pointed star that became the symbol of communism. Now, stars can also be found simply as a decorative symbol - they are hung on the New Year tree, they make crafts, they are painted on the walls of houses. And if you also want to learn how to draw a star, step-by-step instructions will help you with this.

How to draw a five pointed star step by step

If you want to learn how to draw a five-pointed star, then proceed as follows:

First of all, we draw a straight vertical line - the axis of symmetry.

From its top point, draw two diagonal lines so that the angle formed by them is divided by the axis of symmetry into two equal parts.

Then draw two parallel horizontal lines.

Based on these auxiliary axes, draw the top three rays.

Then we make two lower beams. It is important that they are all the same length.

Erase all auxiliary contours.

Everything, now our picture is completely ready!

Learning to depict a three-dimensional star

If in the last section we learned how to draw a star in stages, now we will complicate the task a little - we will add volume to the figure. Don't worry, it's not difficult at all.

First, draw three lines - vertical and two diagonal. It should look something like an isosceles triangle divided in half.

Then draw another triangle, this time with an obtuse angle and pointing down.

It remains only to supplement the two lower rays with the help of two diagonal lines. The general contours are ready.

Now, with two more diagonal lines converging in the center, we divide the lower rays in half.

We do the same with the two upper rays.

Let's add 4 more short lines converging to the center.

Then we will remove all unnecessary contours.

Time to work with color. We chose blue and blue, but you can choose any shade. It is only important to remember one rule: dark and light areas should alternate. Then the figure will look voluminous.

That's all, the drawing is completed.

An even five-pointed star in a few steps

You have probably seen that geometric bodies are very often drawn inside a circle. And for good reason, because it is much easier to portray an even figure. You can see for yourself if you decide to learn how to draw a star with a pencil.

Let's draw a circle first. To make everything work out smoothly, it is better to do this with a compass. Then we mark five points at an equidistant distance from each other.

We connect each point with two others that are not neighboring.

Now draw the main contour with a marker or felt-tip pen.

And we will erase all unnecessary.

Now the star is ready - we did it!

A star from a pentagon is nowhere easier

If you want to learn how to draw a star correctly, then there is one very easy and fast way. True, for this you need to be able to draw pentagons. Or have it ready.

The first step is to draw a pentagon.

On the second, we connect its vertices so that one point is connected to two opposite ones.

Yellow star for beginners

If you are just starting your journey in fine arts and want to learn how to draw a star evenly, then you should do it like this:

First, draw the letter "A" with a slightly overestimated transverse bar.

Then we connect the left extreme point of the transverse bar with the lower end of the right diagonal line.

We repeat the same for the other side.

After that, color the resulting figure in yellow. If desired, you can choose a different shade.

Draw a Shooting Star and Make a Wish

We all know that when you see a shooting star, you need to make a wish. Now we will figure out how easy it is to draw a star “with a train”.

First, draw the usual five-pointed star. Don't worry if the lines are a little uneven.

Then we outline a point in the lower left corner and draw four smoothly curving lines from the rays to it. In some way, these lines will resemble part of an umbrella - its spokes are located in a similar way.

Then you should direct all the contours with a black felt-tip pen.

Now let's add transverse strokes - they will indicate movement, give the picture dynamism.

Everything, our drawing is ready.

Images of stars are an indispensable attribute of many crafts. They are used in everyday decor, to create holiday cards, in children's art and in many other areas. We have made a selection of star stencils for you, trying to take into account most of the options for their use.

Various images are at your disposal. Among them are both the most popular traditional stars and original patterns that are rare. You can increase or decrease images in size using the tools of any graphic editor. You can also collect several images on one sheet to use at once. Fill with paint or fade, combine with other popular patterns - do it the way you want.

Any star stencils in this collection are available for printing and then cutting out of paper. Some of them will be convenient to immediately impose on some kind of background. In addition, you can take them as a basis in order to then create some kind of voluminous craft. So, for example, some of these stencils can be used to make an asterisk for decorating a Christmas tree or a soft toy in the form of a cute starfish. Use as patterns, templates for drawing the outlines of stars on walls, a guide for creating a starry sky in a room, etc.

Some stencils make the most sense to print. Other stars are easier to draw on paper and cut out. Whatever you're looking for, browse the entire selection to find the best option.

The step-by-step instruction “How to make a three-dimensional paper star” will help you create lovely New Year crafts with your own hands and you can decorate whatever you want for the holiday.

Photos and diagrams "" will make the creative process unpretentious, exciting and fast. We offer 3 options for volumetric stars.

For a volumetric star you will need:

1. Sheets of colored paper. For the third version of the star - colored cardboard. And you can make white stars and paint with paints, felt-tip pens ...
2. Pencil and scissors
3. Glue for connecting figures and their parts.

The first option is how to make a three-dimensional paper star

From sheets of colored paper, cut out two squares of the same size.
We fold one of the squares in half on one side, then on the other:

Then fold the square in half diagonally twice, as in the picture:

We make 4 cuts from the edge to the middle of the folds, which we mark in advance with a pencil:

We bend the edges of the future volumetric star. We carefully look at the photo and repeat:

Glue the edges of the rays under the fold and glue:

One half of the volumetric star is ready:

Step 6
In steps 1-5, we make the second half of the star:

Step 7
We smear with glue the rays of one of the halves from the inside:

Connect the shapes carefully. An amazing voluminous star made of paper is ready:

The second option is how to make a three-dimensional star out of paper

The star consists of two parts. Cut them out like this:

It turns out such cute details for a three-dimensional star:

Carefully, along the fold lines, bend the parts, as shown in the photo:

Bend back the places for gluing parts. The first detail of the future volumetric star is ready:

Do the same for the second piece for the star. Use paper of a different color, then the star will shine even brighter :).

To glue the two halves of the star, smear all the places for gluing with stationery glue and carefully connect the parts:

The five-pointed paper star is ready!

The last and the simplest option how to make a paper star

For one craft, cut out 2 five-pointed stars of the same size from colored cardboard. Draw them yourself or use this diagram:

Make cuts on each star as shown in the diagrams.

Scheme of a notch on one star:

Scheme of the notch on the second star:

Connect the stars by inserting one into the other through the cuts made according to the schemes and you get a pretty star:

Any voluminous star made of paper can be decorated with drawings or applications, then hung by a thread. They will be great neighbors or.
Good luck!

Holidays, themed evenings, theatrical performances - all this requires certain paraphernalia. And just decorating the house with interesting items, especially if they are made by hand, is always nice. In our article we will tell you how to make a star out of paper. Everyone will be able to choose for themselves the way they like from the many proposed.

Content:

How to make a small paper star

The presented stars look very beautiful when there are a lot of them, and they are multi-colored, since their size is small (about 2 cm).

Before starting work, prepare:

• colored paper (can be replaced with glossy or unnecessary magazines);
• scissors.

Progress:

Star for cutting: templates, stencils and patterns for printing

Templates

stencils

Scheme

Volumetric paper star

The presented star looks beautiful in a children's room for decorating the interior; on New Year's holidays, you can hang it on a Christmas tree, a wall, attach it to a chandelier, or simply decorate a gift.

The following items should be in the workplace:

• high-density colored paper (can be replaced with colored cardboard);
• pencil;
• glue;
• scissors;
• ribbon.

To get a beautiful three-dimensional star, follow the algorithm below.

volumetric star
Take 2 square paper sheets and fold them in half, first on one side, then on the other, so that when you straighten the sheet, you get 2 fold lines - horizontal and vertical. Then fold twice diagonally.
With scissors, cut the paper a little (about half way) from the top and bottom along the folds, and then from the left and right.
Following the drawings, fold the edges from the cut lines.
To fix the craft, take the glue and process it on the back of all the star rays. Then make the second asterisk according to the previous description.
Glue the two stars together as shown in the picture. You can decorate them with sequins, beads, rain, etc.

Star: origami

Stars made in the style of origami look original and stylish when made from notebooks for music or newspaper sheets.

Let's get to work:

Five-pointed paper star

If you want to make a voluminous five-pointed star, then we advise you to choose such material for work as cardboard.

In addition to cardboard, scissors, paints, a simple pencil and glue should be in the workplace.

Progress:

Star of Bethlehem

Method 1

Such a star will become a decoration in any room and not only on Christmas days. But we’ll warn you right away that it will take a lot of time, the work requires dedication, scrupulousness and patience. But the result will surely please you.

Before you begin, you should have the following materials on hand:

• plain office paper (coloured) A4 in the amount of 50 pcs.;
• dense threads;
• PVA glue;
• stationery scissors;
• stapler.

Let's start doing crafts.

Star of Bethlehem
Take the sheets and cut into 2 pieces lengthwise.
Twist all paper pieces so that one edge is denser, the other is looser, coat with glue and squeeze a little more. These will be the rays of our future star.
Take a stapler and start with 3 beams. Fix them in the form of a fan.
You should put such fans on the prepared dense thread and tighten it tightly.
You will get a ray-shaped ball on a string. This is our star, which can now be hung in any place convenient for you.

Advice! If in your work you use not colored paper, but plain white paper, then spray paint will help to give the star beauty and shine.

Method 2

Making a star that glows in the dark

There is nothing complicated in creating a luminous star, as it seems at first glance. Just take any template of the star you like, make beautiful holes of any shape (round, diamond-shaped, triangular, pentagonal, etc.). After that, carefully pull any garland with small bulbs through these holes. When the job is done, the template must be fixed with glue. This version of the star is a great way to update an old unsightly garland and give the interior magic.

Advice! The stars can be hung separately on ribbons, or you can simply connect them all with a garland and lay them out on a windowsill or other surface.

Video instructions

Finding a suitable and understandable video is a real gift for needleworkers. We have selected for you the most interesting, in our opinion, video instructions for creating stars in different variations.

Volumetric paper star:

Origami five pointed star:

Origami Star Flower:

Star 3D: