home › Love and relationships › How to make flowers from balloons with your own hands. Master class on making flowers from balloons with your own hands

How to make flowers from balloons with your own hands. Master class on making flowers from balloons with your own hands

More and more often you can find created unusual compositions from balloons with your own hands. Such original compositions you can decorate the walls and ceiling of your room for the celebration. We invite you to get acquainted with the process of making such an element as a flower from a sausage ball with your own hands.

You should know that making various designs from colorful balloons is called the art of aero design. A separate direction in this art is called twisting or balloon modeling.

For the manufacture of compositions, balls are most often used - sausages, which can be very easily twisted and fastened together.

The main thing in the direction of twisting is to learn how to create from latex material basic elements and figures, as well as master the ways of connecting and twisting the balls together.

We invite you to learn several ways and schemes for making figures and flowers from sausage balls with your own hands for decoration holiday composition.

In addition to traditional sausage balls for modeling simple crafts and complex twisting compositions, other latex balloons are also used in aerodesign, which can be classified according to the materials from which they are made, as well as in appearance.

We make a chamomile flower from sausage balls: how to make a bud

Run this beautiful flower from balls is quite simple and fast. For work you will need the following materials and tools:

two latex sausage balls: one white color, the second is green;
balloon pump.

We offer you detailed instructions for modeling a chamomile flower bud.

Inflate the ball - a white sausage with a pump not completely, tie it. Make sure that small tails remain on both sides of the sausage. Twist the balloon in the middle several times and tie its beginning and end. You have two sausages connected together. Take these sausages and twist them in two places so that they are divided into three equal parts. It turned out six connected "sausages".

Fold these latex "sausages" into an accordion shape and join the edges in one hand. So you get three petals on top, and three on the bottom. Twist the folded accordion several times - your chamomile flower is ready.
Now you can start creating a flower petal from balls - sausages.

Take a ball - a green sausage, inflate it and tie the end. Measure ten centimeters from the end of the latex balloon and twist it several times. Fold the formed small part in half, connecting the knot and the place of twisting, and fix the ball in this position. Thread a green ball into a white bud - the stem is finished.

You can leave the flower in this form, or you can add a couple of petals. To do this, you need to fold the green ball in half and, stepping back a short distance from the bend, twist it several times - one petal is ready. Fold the remaining end again, measure a little and twist - the places of twisting should match. After all the manipulations done, you will get a wonderful chamomile flower from sausage balls

We collect an iris flower from balloons with our own hands

To create an iris flower from balloons, you will need two long ball green and purple.

Inflate the balloon purple and tie off the end. The resulting tail must be connected to the knot. You should have a balloon ring. Fold this ring in half and twist it several times. You should form a figure resembling the number eight.

Now join your figure eight rings together, fold and twist. The flower bud is ready.

Start creating the flower stem. To do this, take a ball - a green sausage and inflate it. Tie the ends and fold in half. Then step back a little from the fold and twist a few times. You have formed a flower petal.

Fold the bottom of your ball again, step back six or eight centimeters and twist the ball. You have a flower stem. You need to connect the flower bud and the stem.

As a result of the manipulations done, you will get a beautiful and delicate flower balloon iris. You can make any number of such flowers and arrange them in a lush gift bouquet.

A selection of videos on the topic of the article

At the end of the article, we bring to your attention a selection of thematic video for the article. In the proposed material, you can see detailed instructions on the process of issuing flowers from sausage balls. We hope the video is helpful to you. Happy viewing and learning.

More and more often you can find created unusual compositions from balloons with your own hands. With such original compositions, you can decorate the walls and ceiling of your room for the celebration. We invite you to get acquainted with the process of making such an element as a flower from a sausage ball with your own hands.

You should know that making various designs from colorful balloons is called the art of aero design. A separate direction in this art is called twisting or balloon modeling.

For the manufacture of compositions, balls are most often used - sausages, which can be very easily twisted and fastened together.

The main thing in the direction of twisting is to learn how to create basic elements and figures from latex material, as well as master the methods of connecting and twisting the balls together.

We invite you to learn several ways and schemes for making figures and flowers from sausage balls with your own hands to decorate a festive composition.

We make a chamomile flower from sausage balls: how to make a bud

To make such a beautiful flower from balloons is quite simple and fast. For work you will need the following materials and tools:

two latex sausage balls: one is white, the other is green;
balloon pump.

We offer you detailed instructions for modeling a chamomile flower bud.

We collect an iris flower from balloons with our own hands

To create an iris flower from balloons, you will need two long balls of green and purple.

Inflate a purple balloon and tie off the end. The resulting tail must be connected to the knot. You should have a balloon ring. Fold this ring in half and twist it several times. You should form a figure resembling the number eight.

Now join your figure eight rings together, fold and twist. The flower bud is ready.

Fold the bottom of your ball again, step back six or eight centimeters and twist the ball. You have a flower stem. You need to connect the flower bud and the stem.

As a result of the manipulations done, you will get a beautiful and delicate iris flower from balloons. You can make any number of such flowers and arrange them in a lush gift bouquet.

A selection of videos on the topic of the article

A bouquet of balloons with your own hands is a memorable gift for its originality. Just presenting balls or a composition of fresh flowers is banal, but you want to surprise a person. Especially if the one to whom you are going to give has a healthy sense of humor.

We want to make a reservation right away that not any balls are suitable for creating a bouquet. Specialists work with the so-called CDM. They have a long rounded shape, look like sausages, and have 100% latex in their composition.

Easier you can't imagine

We will need:

CDM green for the stem and other colors for the flowers themselves;
special pump.

Blow up one balloon. We tie the ponytails on both sides into a knot.

Twist two petals on each side. Moreover, twisting occurs through the knot of tails. The photo below shows the process itself. We make two such blanks.

Now we connect two four-leaf flowers through the middle.

We make five of these colors. Now we are preparing the stems from inflated green balls. From the side of the knot, we bend the top and insert it into the middle of the flower. We connect the middle of the stalk of all flowers.

From the rest of the stems below the middle knot, we begin to weave a basket, as shown in the photo.

Second way

The flower itself is made in exactly the same way. The only difference is that they work differently with the stem. We fold it into three loops, by eye we determine the middle of the addition. And twist along the intended center.

We straighten the resulting leaves.

For the base we take 6 round balls. To inflate balloons of the same size, count the strokes of the pump.

Tie two balls together. Moreover, it is necessary to choose a pair in which one of the balls will serve as a load. To do this, fill it with water.

We twist all the pairs so that the weight ball is centered at the bottom. We tie the stems of flowers to the middle of the base.

We bend the stems around the upper ball and fix it over it with a red ball, tying a bow out of it.

Surprise for the holiday

Such an option, as, in fact, the previous ones, is suitable for a birthday, and for March 8, and for Valentine's Day.

It is necessary to prepare:

five-inch air balloons in the form of hearts, preferably red - 10 pieces;
balloons green sausages - 10 pieces, pink - 2 pieces;
pump.

We inflate a green balloon for modeling and twist the loop at the end of the knot.

Next to it we form identical second and third. They should be perpendicular to the free part of the ball.

We inflate heart balloons and attach them to the trefoil.

Now we take the finished pink sausage and twist the loop at the top, according to the diagram below.

We twist the ball into a sausage. We tie an empty tail and cut it off under the very knot.

We inflate the second sausage without leaving the tail. Having measured 30 centimeters from one end, we tie a loop, each side is about 15 cm.

We form next to exactly the same loop. The remaining end should be approximately the same 30 cm.

We connect blanks from pink balls. We insert all the stems with hearts into the loop.

Simulation balls

This master class suggests making a rose from a modeling ball.

Inflate the balloon, leaving the tail for air movement. We twist the small middle petals of 4 pieces and connect them together, as shown below.

At the same time, we hide the tail with a knot in the middle of the connection.

Now we will form large petals.

To make it more convenient to work, the area in the work must be kneaded in order to disperse the air and make it more pliable.

Divide the rest of the ball into three parts and attach the green stem according to the following image.

We twist the pink stripes into loops.

One of the sides of each loop is interchanged with the next.

At the base of the flower from the green ball we connect three leaves.

We twist more leaves down the stem.

If necessary, watch a video on creating such a rose.

Having made several of these roses, you can collect a very lush bouquet.

Fifth option

And lovers of spring flowers of tulips will be pleased with such a bouquet.

Prepare:

yellow balls - 7 pieces;
green balls - 7 pieces;
white - 5 pieces;
red - 3 pieces;
pump.

We inflate one yellow balloon and one green, leaving tails for air movement. We take a yellow ball and divide it by eye into five parts, at the top we twist two bubbles into a loop, approximately the size of a palm.

We make three more bubbles and connect with twisting the previous two.

Remaining free end fill the ball in the middle of the bud.

We attach the stem to the flower.

At the base we form bubbles-loops, they act as leaves.

We make six more of these tulips and put them aside for now.

Inflate five white balloons for the basket. At the end of one we make a bubble.

After, we divide the ball into three parts by eye and after two thirds from the bubble we form a similar second one. We do this with all the balls.

We connect two balls as follows. On one, stepping back 7-8 centimeters, we twist with the middle knot of the second ball. So in turn we fasten all the balls.

We twist the remaining short tails with each other, but so that a kind of triangle forms.

We form petals from long residues, connecting the bubbles of the tops with the middle ones.

We take a red ball and tie its tail to the twisting of one loop, retreat 7-8 cm and connect in the same way with the second loop, etc.

From the rest of the red ball we lower the air and tie a knot. We cut off the excess.

From the second red ball we make a bow, girdling the vase and the tulips inserted into it. Twist at the junction of the ends.

We form bow loops.

Due to the fact that some dangerous means and tools, you can safely connect children to creativity. One has only to make sure that the balls are properly kneaded and pliable so that they do not burst in the hands of the child.

Video on the topic of the article

Bright and showy flowers from balls with their own hands - an indispensable attribute children's holiday, great option decor and a great alternative to an ordinary bouquet. With the help of multi-colored sausage balls, you can create real flower arrangements, A detailed instructions will give everyone the opportunity to do it with their own hands.

After seeing the intricate colorful arrangements of long balloons, you may be wondering how to make DIY balloon flowers. This task is for everyone. Before you start creating an unusual bouquet, you should master the basic rules for modeling from sausage balls: twist in one direction with one hand, using the other to support ready-made bubbles. It is necessary to start work from the side of the neck, as you model, moving towards the tail. Modeling from sausage balls is called twisting. In order to make a simple flower from sausage balls, you only have to master its basics.

From several flowers you can make a real bouquet, add it with a figure, number or other decorative element. Bouquets of seven, nine, eleven flowers look spectacular, and the bouquet can be either monochrome or variegated. So that the flowers from the balls do not crumble, clasp them with a contrasting ball or make something like a basket.

Necessary materials

A flower made of sausage balls will require a minimum of material costs and effort from you. Prepare several multi-colored sausage balls: orange, red, purple, blue for the petals; green or light green - for stems. With the help of white balloons you can make a bouquet of daisies, blue and blue ones will remind you of cornflowers. It is convenient to inflate them using a hand pump, but do not despair if one is not at hand: it is quite possible to inflate the balloon with your mouth. To make one simple flower you need to prepare two balls. To a beginner who creates for the first time unusual bouquet with your own hands, detailed instructions will come in handy, and you can draw inspiration by looking at finished work sophisticated lovers of twisting.

Step by step instructions for creating

Having decided to create an "airy" bouquet with your own hands, outline for yourself detailed plan actions. Don't give up if modeling the first flower seems difficult for you: skill comes with experience.

Using a hand pump, inflate several sausage balls. This must be done in such a way that the ball is not very dense: otherwise, it will burst during modeling.

Bend the petal ball, connecting its ends with a knot.

Opposite the junction, make a twist, as a result of which you will get two symmetrical halves. Hint: the joint is formed by the oncoming movement of the hands.

Make two twists at an equal distance and fold with an accordion. On this stage the ball will resemble a bunch of six sausages.

With both hands, connect the folds and fix them by twisting the lock. Do this with both hands. You will get a flower with six petals.

At the end of the ball-stem, make a "bubble" that will become the center of the flower. To do this, make a twist and align the end of the ball with it, then thread it in the middle between the petals.

Make two symmetrical leaves on the stem by simple twists.

A flower made of sausage balls is ready!

Having made a colorful flower with your own hands, you will certainly want to continue to create and improve in twisting. Made with love, not only children, but also adults will like it, because it intricately intertwines sophistication and some childishness. Having mastered simple six-petal chamomile flowers, you will certainly want to learn how to twist intricate "roses" and "tulips" from balls. Having mastered the technique of color modeling, you can transform and fill bright colors any holiday.

A balloon is an invariable attribute of a holiday. No birthday is complete without decorations made from colorful balloons. Today we will tell you how to make flowers using balloons.

getting ready

Take a thick piece of cardboard and cut out 2 circles in it, the first with a diameter of 10 cm, and the second with a diameter of 15 centimeters. In the future, these parts will be used for templates or holding "flowers".

Inflate 5 balloons of the same color (you can use balloons of 2 colors). Balloons inflated in this way must pass through a hole with a diameter of 15 cm.

Now take more multi-colored balloons, inflate them, they should pass into the 2nd hole (with a diameter of 10 cm). With the help of these balls we will make the center of the flower.

Is a man in love with you: 10 signs

What are the benefits and harms of bananas

Making a flower

To begin, tie 2 large balls together. You can use thread or wire. The remaining 3 large balls are also tied together.

Having received 2 bundles of balls, connect them so that they protrude in one direction.

The balls that are used to create the center of the flowers are tied together so that they face in opposite directions.

What do people regret most at the end of their lives?

10 Signs You've Been Visited by an Angel

How to find your soul mate: tips for women and men

Connect 2 groups of balloons as shown in the picture. You will get a "flower".

If you have also created a "stem" - it can be combined with a "flower", as a result you will get a solid figure. For the stem, you can use a painted wooden rod.

Making a camomile

Take balls of 3 colors (white, green and yellow), which have an oblong shape.

Further actions are similar to the previous ones, for an ordinary flower. The only difference is that you need to tie the balls in the middle.

Making a balloon flower

For such a flower, we need 2 multi-colored balls and a hand pump.

The ball must be taken in an oblong shape. We inflate the balloon and tie it at the end, leaving 3 cm. We connect the balloon into a ring and bend it in the middle. We will get 2 "sausages". We divide each of them into three parts, twisting both parts at each division point. We fold them into an accordion, twisting at one point. It turned out the "petals" of the flower.

Take 1 more ball of a different color (preferably green). We inflate it and fold one of its ends into a "ball" - this will be the "top" of the flower. We twist it with “petals”, in the middle of the stem we twist and get “leaves”. The flower is ready.