Elements of the educational and material base. Elements of the educational and material base Filtering half mask f 62sh

The F-62Sh respirator is used in the mining industry. The product protects against dust without the content of toxic gases. It consists of a half mask, a skirt made of textile material, fastening elements and an exhalation valve. The F-62Sh respirator has a two-point fastening on the head.

The model effectively protects respiratory organs from vegetable, metal and mineral dust. The F-62Sh respirator copes well with chemicals (no toxic gases). The advantage of the F-62 Sh mask is the ease of use and resource recovery by cleaning or replacing filters.

Description of the characteristics of the F-62Sh:

• The mask is tight to the face.
• The metal nose bridge prevents harmful substances from entering inside.
• The head strap ensures the convenience of using the product during work.
• Available in 3 sizes, perfect for any size person.

Terms of Use

The F-62Sh respirator is used in all climatic zones in the temperature range from -40 to +55 degrees. The product is used at a dust concentration of not more than 500 mg / m³, with an oxygen content of at least 18%. Not recommended for protection against flammable substances (naphthalene, etc.).

Life time

Warranty period of storage - 3 years.

Specifications

• Degree of protection: FFP2
• GOST R 12.4.041-2001.
• Protection against vapors and their constituent aerosols in mg/m3 more than 200
• Air resistance 45 Pa dm3/min
• Temperature range: from -40 to +55 C.
• Weight F-62 - no more than 250 g.
• Shelf life - no more than 3 years

At the present time, various technological inventions with their negative impact on the full life of a person occupy a large place in the phenomenon of respiratory protection of the respiratory organs of a person. A respirator is a simple way to protect the respiratory system, moreover, in many situations, a simple, affordable and effective technique. There are a lot of varieties of it, depending on the type, it can protect against dust, smoke and some toxic substances. As practice shows, respirators are produced for various purposes - for industry, defense, mass protection against viruses.

General characteristics of the F-62sh respirator.

F-62sh respirator - according to its intended purpose, it is a means of personal protection of the respiratory organs
a person from various types of dust that do not emit toxic gases into the air. The air that is inhaled by a person through the F-62sh respirator is purified from harmful substances by filtration through a uniform filter layer of special materials that are hydrophobic and resistant to high temperatures, alkalis and acids. It has high filtering abilities in relation to many aerosols, an increased effect of trapping and assimilating harmful substances on the way to the respiratory organs.
Appearance features. The appearance resembles a rubber half mask with a filter cartridge, which is equipped with a replaceable anti-aerosol filter. For a snug fit to the front part and convenient operation, it is equipped with a headband. The respirator is designed for reusable use, the replaceable dust filter is easy to clean and, if necessary, can be easily replaced with a new one, which is included in the respirator kit.

Scope of F-62sh respirator.

This type of respirator is widely used in industries with medium and difficult working conditions - mines, factories, chemical plants that work with organic fertilizers, as well as during painting work, it ensures minimal ingress of harmful inhaling substances.
It is worth remembering that the above-mentioned method of protection, if used correctly, stops the flow of harmful substances into the human body for a certain time and at least slightly prolongs its protection, which in turn can save the body from the ingress of harmful substances in the air. Enterprises with harmful working conditions should take care of the health of their employees and provide them with F-62sh respirators, which in certain cases will help save human lives.

The F-62Sh respirator (Fig. 26) and RP-91Sh are designed to protect the respiratory organs from silicate, metallurgical, mining, coal, tobacco dust, dust of powdered fertilizers and intoxicants, as well as other types of dust that do not emit toxic gases. Widely used by miners.

Inhalation resistance no more than 3.5 mm of water. Art.

The coefficient of permeability of micropowder with a dispersion of 1-15 microns, not more than 0.1%. Weight - 250 g.

When working out, the filters are easily replaced with new ones. Depending on the concentration of dust, humidity and air temperature, the physical load of the worker, the operating time of the filters can vary from five to thirty shifts. The respirator itself can be used an unlimited number of times.

The RP-91Sh respirator differs from the F-62Sh in that it has not one, but two replaceable filters. This facilitates breathing, improves filtering ability.

Dust respirator fort-p

The FORT-P respirator is designed to protect the human respiratory organs in the presence of aerosols of various nature (dust, smoke, fog) in the ambient air with their total concentration not exceeding 200 mg/m3 (Fig. 27).

Allows you to provide effective protection against a wide range of hazardous aerosols: industrial (silicate, cement, coal, emery, pigment, synthetic fibers, bleaches, detergents), agricultural (cotton, tobacco, flour, down, wood), household (viruses and bacteria, repair and cleaning of the apartment, spraying gardens and orchards with pesticides).

The coefficient of penetration of aerosols with a particle diameter of up to 2 microns - no more than 1%. Weight - 20 g.

Anti-dust respirator rpa-1

P
designed to protect against aerosols and dust at high concentrations, that is, it allows you to work in very dusty places. Respirator filters have a high dust holding capacity. Therefore, it is used when dust is 500 mg / m3 or more (Fig. 28).

Consists of a rubber half mask PR-7, two plastic cartridges with replaceable antiaerosol and dust filters,

an exhalation valve with a safety clip, to the buckles of which a cap is attached, and a knitted obturator. At the bottom of the body of each of the cartridges there is a branch pipe with a saddle to accommodate the inhalation valve. The flange of the branch pipe ensures the connection of the cartridge to the half mask. Air enters the cartridge through the louvers in the cover.

The filters are made in the form of concentric folds of RFM filter material. The outer part of the last pleat of the filter is tightly clamped between the wall of the cartridge body and the sealing annular protrusion of the cartridge cover.

At higher concentrations and a significant dispersion of dust, the service life of the filters is reduced, as the resistance to inhalation increases.

The initial inhalation resistance is 29 Pa (3.0 mm water column).

M assa respirator - 250 g.

Marine respirator RM-2

Designed to protect respiratory organs from aerosols and vapors of radioactive substances.

The principle of operation is based on the isolation of the respiratory organs from the environment and the purification of the inhaled air with filter materials containing special impregnation. It must be remembered that RM-2 does not protect against vapors of other toxic substances and gases.

The respirator is a rubber half mask, on which a detachable plastic filter box, an exhalation valve with a screen, an intercom and an adjustable headband are mounted (Fig. 29).

The respirator kit includes four replacement filters in a case and a storage bag with a waterproof plastic bag.

The half mask is made in three height assortment. Height marking is applied to the inner surface of the half mask in the form of a circle with a number inside.

The selection of the RM-2 respirator is made according to the height of the face, as well as the R-2 respirator.

Semi-fitted dress in dark blue with a V-neck, decorated with a red silk scarf (included). Fabric - gabardine. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the dress at a distance of 8 cm from the edge of the shoulder. A chevron is sewn on the left sleeve, indicating belonging to the Ministry of Internal Affairs of Russia, and on the right sleeve, a chevron, indicating the service of a police / justice officer. You can add chevrons with Velcro. A shawl to a dress is worn in a triangle folded in the form of a scarf, the narrow ends are tied together and tucked in at the back inside under the collar. The wide side is tucked in under the neckline of the dress. It is allowed to wear a summer dress without a scarf in the office. The length of the dress along the bottom edge should be at the level of the knees. The Short Sleeve Police/Justice Dress is part of the new police uniform. Material drawing example:

Gorka-3 suit is the most successful and widespread type of Gorka suit. Made from rip-stop material with a density of 270 gr. per 1 m2 of black color, structurally consists of a jacket and trousers. Used to protect the fighter from adverse weather conditions, all-weather. The main difference of this suit is the fleece lining. The jacket has a deep hood with drawstrings, two welt side pockets covered with flaps fastened with a button, one inside pocket for documents and two pockets on the sleeves, just below the shoulders. It is worth noting that the fleece lining is removable, which increases the usability of the suit and allows it to be used in a wider temperature range. Shoulders, elbows, cuffs are reinforced with oxford 0 rip-stop synthetic fabric. Reinforcement on the elbows of the mountain-3 suit is made in the form of a Velcro pocket, complete with hard inserts. The sleeves are equipped with anti-dust cuffs and a hidden volume adjustment elastic band just above the wrist. The jacket also has an adjustable drawstring along the edge and fastens with buttons. Gorka suit trousers have six pockets. Two side slotted, two cargo waybills and two rear. The knees, the bottom of the legs and other loaded areas of the trousers are reinforced with Oxford 0 rip-stop synthetic fabric. The bottom of the legs is double, the so-called “dust boot” reinforced with a cuff that is worn over the boot and prevents dust, dirt and small stones from entering it. Just below the knee bend, the trousers have a fixing elastic band. It automatically adjusts the volume of the leg and prevents the fabric from sailing. Pants are equipped with detachable suspenders. Main features: removable fleece lining demi-season suit strong material inner pocket hood CHARACTERISTICS SUIT CHARACTERISTICS Material: ripstop Composition: 70/30 Density: 240 gr. Overlays: oxford 0 Cuffs: yes Sealing elastic bands: yes Jacket/pants pockets: yes/yes Seasonality: demi-season Additionally: reinforced inserts, removable fleece lining, anthers on trousers, suspenders included

The women's demi-season raincoat is part of the uniform of the police officers of the new sample. Raincoat of a semi-adjacent silhouette, with a central inner secret fastener for five loops and buttons and additionally for an upper uniform button and a through overcast buttonhole, on a warmed stitched lining. On the coquettes in the area of ​​the shoulder seam, there are two loops and one non-cut loop for attaching removable shoulder straps. Sleeves are set-in, two-sutural. In the lower part of the middle seam of the sleeve there are stitched-in pats, fastened with a loop and a uniform button. Turn-down collar, with detachable stand. The removable belt is threaded into the loops located in the side seams and fastens with a buckle with a tongue, the free end of which is threaded into the loop. On the right collar there is an internal welt pocket with a leaflet. Jacket fabric (100% polyester) with rip-stop weaving threads and water-repellent impregnation. The second layer is the membrane. Filler: Thinsulate 100 g/m. Recommended temperature range: from +10°С to -12°С. Worn with a dark blue scarf or a white scarf. It is allowed to wear a demi-season raincoat neatly folded with the front side out on the left hand. Demi-season raincoats are worn buttoned up. It is allowed to wear demi-season raincoats with the top button undone. Demi-season raincoats are worn with or without removable insulation with a belt fastened with a buckle. Removable shoulder straps in dark blue and stripes in dark blue are worn on this raincoat.

Moss scout suit The scout suit is made in a very successful design of the demi-season "smok" uniform in the colors of the A-TACS FG experimental camouflage. The suit consists of a jacket and trousers. The jacket is long, below the waist. Equipped with a deep hood with adjustable drawstrings, it has four voluminous cargo pockets closed with flaps on a large English button, which makes it easy to open the pocket in a hurry, with shooting gloves, and in other extreme conditions, when the time count has gone by seconds. The elbows of the suit are reinforced with an additional layer of fabric, the sleeves are equipped with wide rubber bands. The front zipper is duplicated along the entire length with smaller English buttons, which are closed in secret. Trousers of the suit are free-cut, all loaded parts are reinforced with an additional layer of fabric. A wide rubber band is sewn into the belt, a thin cord for additional tightening, and loops for attaching suspenders. The trousers have four pockets. Two slotted, covered with valves on a large English button, two cargo overhead, in which additional ammunition can be carried. A wide cuff and so-called "brakes" made of elastic fabric are provided along the bottom of the legs, which prevent the legs from being pulled up. color moss (A-TACS FG) Main features: coloring drawstring at the waist elastic bands on the pants carrying case for suspenders included CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: T/S Composition: 65 pe /35 viscose Density: 160 gr. Cuffs: yes Seals: no

Demi-season boots with a top made of durable elastic chrome leather 1.4 mm thick and with a reliable rubber sole equipped with a large tread are the best shoes used by numerous employees of law enforcement and security agencies, tourists and ordinary people leading an active lifestyle. As a lining, a strong and, at the same time, very soft nylon mesh is used here. The toe cap and heel of the boot are reinforced with a special thermoplastic material. The boots have a high-speed lacing that allows you to quickly and securely fix the foot in the boot. The model is equipped with a deaf valve that prevents foreign objects from entering the boot. ASSAULT BOOTS OF URBAN TYPE Combined top: genuine chrome leather (1.2-1.4 mm) + elastic genuine leather on soft piping and valve. Lining: laminated mesh. Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 40-46. Semi-deaf valve. Soft edge. Black color. Weight: 580 gr. Specifications Assault boots. Model Mongoose 24111 Producer BUTEX Country Belarus Top material genuine chrome leather (1.2-1.4 mm) + on soft edging and valve elastic genuine leather Lining material laminated mesh Sole fastening adhesive Instep support metal Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1 , (Italy) Available size range 38-46 Shoe color black Valve type semi-deaf valve Soft piping present

Border cap with a green top, black band and red piping. The cap is completed with a cockade and a metallized filigree (or lacquered) cord. The height of the crown is 7 cm. It is made within 3-5 working days.

No Velcro for chevrons. The size is indicated by the collar. Shoulder straps can be used Worn loose Waistband adjustable with side elastic bands 2 chest pockets Material: 65% Polyester 35% Viscose

The jacket is short, straight cut. Fabric - gabardine. Designed for employees of internal affairs bodies with special police ranks. According to the order of the Ministry of Internal Affairs of Russia No. 575, chevrons are sewn onto the sleeves of the suit at a distance of 8 cm from the edge of the shoulder. A chevron is sewn on the left sleeve, indicating belonging to the Ministry of Internal Affairs of Russia, and on the right sleeve, a chevron, indicating the service of a police officer. You can add chevrons with Velcro. The central fastener on a detachable "lightning". Turn-down collar. Shelves with detachable yokes in the area of ​​the shoulder girdle. On the shelves there are chest welt pockets with figured buttons on the buttons. Two side welt pockets with zipper entry. Back with stitched yoke. Soft folds are laid along the yoke line for freedom of movement. Single-seam set-in sleeves, with stitched cuffs fastened with buttons. On the bottom of the jacket there is a one-piece belt, the volume of which is regulated by the side sections with elastic band. A back and a shelf on a lining from a knitted cloth (grid). The armholes are edged with edging tape Trousers of a straight cut. Stitched belt with six belt loops. The volume of the belt is regulated by the side sections with elastic band. Two pockets in the side seams. One welt pocket with a flap and an internal button closure is located on the right rear half of the trousers. A red piping is inserted along the side seams of the trousers. It is part of the uniform of a police officer of a new sample. Material drawing example:

Material: gabardine - Classic trousers with piping along the side seam. - The volume of the belt is regulated by the side sections with elastic band. - 6 belt loops on the waist. -Two side pockets. - One welt pocket with a flap on the back half of the trousers. - On the side seam - red edging Example of material pattern:

Thanks to innovative technologies and quality materials that provide maximum protection against rain and wind, you will be in constant comfort, helping to reduce fatigue throughout the day. Characteristics Protection from rain and wind Statutory cut Upper material: Rip-stop Insulation: Thinsulate

Jacket with combined (stitched and removable) insulated lining, removable insulated hood, removable faux fur collar. The jacket is shortened, straight cut. The central fastener on a two-lock detachable "lightning", closed with a wind-shelter valve on the buttons. Turn-down collar with a fastener-paty on a textile fastener. In the area of ​​the shoulder seams there are epaulettes epaulettes View all products by tag epaulettes on buttons with removable false straps for attaching insignia. Shelves and back with coquettes. Along the coquette line there is a red piping. Two breast pockets with flaps on buttons and Velcro fasteners. Two side pockets with flaps on buttons and Velcro fasteners. On the burlap of patch pockets welt pockets with an entrance to the "lightning". On the bottom of the jacket jacket View all products by tag jacket cut-off belt, the volume of which is regulated by the side sections with elastic band stitched on a multi-needle special. chain stitch machine. Sleeves are set-in, two-sutural. On the right sleeve welt pocket with a zipper. A bandage with a reflective tape is sewn inside the pocket, fastened with a Velcro textile fastener. At the bottom of the sleeves there are stitched cuffs with elastic band stitched on a multi-needle special. chain stitch machine. Stitched insulated lining with insulation "Fibertec-200" On the inside of the left shelf there is a pocket for a pistol (with a carabiner on a cord for fastening a pistol) and a patch pocket with a vertical entrance with a zipper. The removable warmed hood is fastened on a detachable "zipper". The volume is regulated by the back of the head and the front neckline. The chin part is fastened with a Velcro textile fastener. Detachable faux fur collar containing Kanekaron fiber (Made in Japan) is fastened with a detachable zipper. Removable insulated lining (vest) made of Firetec 150 insulation, quilted on both sides with lining fabric, fastened with a detachable zipper. On the removable insulation there is a patch pocket with a horizontal entrance with a zipper. Fibertek insulation has a number of advantages over traditional fillers: - Perfectly retains its shape and restores it after washing. - Can be washed and dried multiple times. - Provides greater heat shielding effect compared to other materials of similar thickness and density. - Moisture resistant. - Resistant to long-term use. - It is environmentally friendly and non-toxic insulation. - Practical in terms of price and quality.

The size is indicated by the collar. No Velcro for chevrons. Shoulder straps can be used Worn loose Waistband adjustable with side elastic bands 2 chest pockets Material: 65% Polyester 35% Viscose

The summer suit consists of a jacket and trousers. Straight cut jacket. The collar is a stand, the volume is regulated by a pata on a textile fastener. The central fastener on a demountable lightning closed by a level on textile fasteners. Two breast patch pockets with flaps on textile fasteners. Pockets are located obliquely, in the direction of the hand. Back with two vertical pleats for freedom of movement in the area of ​​the shoulder blades. Sleeves are one-piece. In the upper part of the sleeves there are patch pockets with flaps on textile fasteners, with belt loops on the inside of the flaps. In the area of ​​the elbow there are pads-amplifiers with an input for protectors on textile fasteners. At the bottom of the sleeves there are patch pockets for pens. On a bottom of sleeves cuffs with pats on textile fasteners for volume adjustment. Straight cut trousers. One-piece belt with seven belt loops. The volume of the belt is regulated by a cord with tips. Button closure. Two side slash pockets. On the side seams are two large patch pockets with three folds for volume. The upper part of the pockets is pulled together with an elastic cord with a clamp. Entrances to pockets, designed obliquely, like a hand, are closed with flaps on textile fasteners. In the area of ​​the knees there are reinforcement pads with an input for protectors on textile fasteners. At the bottom of the trousers there are patch pockets with flaps on textile fasteners. The volume on the bottom of the trousers is regulated by a braid. On the back halves of the trousers there are two welt pockets with flaps with a hidden button closure.In the seat area there is an overlay-amplifier Fabric: Mirage-210, pe-67%, chl-33%

OMON winter boots, in which high (24 cm) berets are made of natural chrome leather 1.6 mm thick, with a flexible sole made of thermoplastic plastic, equipped with a large embossed tread and insulation made of high-quality natural sheepskin - these are exactly the shoes that law enforcement officers need , professional tourists and everyone who is fond of outdoor activities. The toe and heel of the boot are reinforced with thermoplastic material to keep their shape. In this model, a lacing system is used, in the upper part of which there are two pairs of metal loops that allow you to quickly take off and put on shoes without removing the laces from the loops. The deaf valve prevents dirt, snow, sand and other foreign objects from getting inside the boot. This model is a godsend for people with a high instep. Top: genuine chrome leather (1.4-1.6 mm). Lining: natural sheepskin. Outsole: TEP (±40°C), 2050. Outsole fastening method: gluing. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 36-50. The deaf valve protects a foot from influence of environment (dust, water, dirt). Hooks. Soft edge. Black color. Weight: 840 gr. Technical characteristics Boots of army type (Berets). Model Omon 905 Producer BUTEX Country Belarus Top material genuine chrome leather (1.4-1.6 mm) Lining material natural sheepskin Sole fastening glue-and-piercing Metal arch support Toe and heel reinforced from thermoplastic material Sole material TEP (± 40 ° C), 2050 Available size range 36- 50 Shoe color black Valve type blind valve Soft piping present Hooks present

Men's raincoat for employees of the Ministry of Defense of a straight silhouette will provide comfortable service and a presentable appearance at temperatures down to -15 degrees. Jacket fabric with a membrane in combination with insulation works as wind and moisture protection. CHARACTERISTICS Cold protection Rain and wind protection Statutory cut Hand wash only MATERIALS Rip-stop Membrane Fibersoft insulation

Description: Jacket MPA-02 with a windproof strap and chin strap, removable insulating jacket and hood. Stand collar. Before the cut-off along the waistline, the upper parts of the front with vertically located welt pockets with a zipper and patch pockets with flaps, fastened with a loop and a "Canadian" button. On the lower parts of the front there are patch pockets with flaps fastened with a loop and a “Canadian” button. A back with stitched bottom part. The volume of the jacket at the waist is regulated by a set-in drawstring with a cord. The ends of the cord are brought out through the clamps. One-piece sleeves with side parts of the front and back, two-seam with pats on the bottom, to adjust the width with a textile fastener. On the sleeves patch pockets are sewn on the "lightning", which is hidden. Hood with visor and drawstring to adjust the volume of the hood. The front cutout is tightened with a cord, the ends of which are brought out through the eyelets, the length of the cord is regulated by clamps. Along the shoulder seams are belt loops. Shoulder straps and false shoulder straps are removable. A removable jacket (liner) is fastened to the jacket with a zipper along the edges of the sides and the neck, as well as with loops of elastic cord and buttons along the seam for attaching knitted cuffs. Removable liner made of double-sided quilted fabric. One-sutural set-in sleeves with stitched knitted cuffs. On the inner left side of the detachable jacket, there is a patch pocket with a textile fastener, a pocket made of the main fabric. Insulation: "Fibersoft" A unique product, indispensable in extreme conditions, with great physical exertion. Replaces several layers of clothing combining wind and moisture protection and a warming layer. Thanks to the one-piece sleeves, it provides unlimited freedom of movement and reduces fatigue. A removable jacket (liner) allows you to provide comfort during a sharp change in ambient temperatures: day-night, high mountains. A large number of different pockets (overhead bulky, welt) is convenient to accommodate all kinds of equipment. It is recommended to use in combination with thermal underwear. Temperature range from +10ºС to 0ºС.

Twilight costume buy online. The Twilight suit borrowed the best features from the equipment of Soviet reconnaissance units. It is made of mixed fabric cotton/polyester, 65/35 with a density of 160g. per 1m2, in the color of a frog. The costume consists of a jacket and trousers. The loose-fitting jacket is equipped with a hood with adjustable drawstrings, which provides ventilation around the ears for the convenience of using the radio headset. The jacket fastens with large English buttons, which are easy to unfasten even with hands in shooting gloves. Four pockets hold all the little things a scout fighter needs. In two large invoices located at the bottom of the jacket, if necessary, even a spare ammunition can be placed. Two chest slanting pockets - mortise, and not so deep. To prevent the loss of personal belongings, all pockets on the jacket are covered with flaps, all with the same massive English button. A feature of the jacket are wide rubber bands on the sleeves in the area of ​​the wrists and cuffs, which almost completely cover the fighter's hands for disguise, with cutouts for the thumbs. The elbows of the jacket are reinforced with a second layer of fabric. For quick identification in an emergency, the jacket has false shoulder straps. Free-cut trousers are equipped with wide loops for a belt and attachments for suspenders, which are included in the kit, the fly is fastened with buttons. The trousers have 4 pockets - two side pockets and two on the back, covered with flaps. The bottom of the legs is pulled in with a wide rubber-fabric tape, the knees are reinforced with a second layer of fabric. For ease of carrying, the suit is additionally equipped with a cover. color frog Main features: ventilation on the hood around the ears hole for the thumb on the cuffs loose fit fabric reinforcements on the knees great for warm weather CHARACTERISTICS SUIT CHARACTERISTICS Material: T/S Composition: 65/35 Density: 160 gr. Cuffs: yes Sealing elastic bands: yes Jacket/pants pockets: yes Seasonality: summer Extras: cover and suspenders included

The MPA-35 suit is designed for comfortable work of employees of the Ministry of Defense in hot weather. Consists of trousers and a jacket with long sleeves. On the sleeves there are reinforcing pads in the elbow area. The bottom of the jacket is adjustable in size. SPECIFICATIONS For hot weather Statutory fit For office work MATERIALS Gabardine (100% polyethylene)

Classic model Can be used with epaulettes Worn outside Belt is adjustable in size with side elastic bands 2 chest pockets Material: 65% Polyester 35% Viscose Attention! At the moment, there are two versions available: - with Velcro base (loops) for placing a chevron - without a base Please indicate the desired option when ordering.

The Soft Shell suit is purposefully designed to meet the demanding requirements of Special Forces operators. Designed to maintain a comfortable body temperature of the user in the cold season during vigorous activity, in bad weather, in wind and rain. The suit can be used as the base 5th layer of ECWCS Gen.III. Trousers MPA-28: -2 side patch pockets with Velcro flaps; - the side sections of the belt are pulled together with an elastic band; - on the bottom of the side seams - "lightning"; - perforated elastic band for attaching to shoes. Soft shell fabric breathes, does not tear, does not get wet, does not restrict movement!

Lightweight boots are made of full grain leather combined with waterproof Cordura fabric. Tongue, flap and back made of eco-leather: a modern material that has all the properties of genuine leather. Even with tight lacing, movement over long distances will be easy and comfortable. The polyurethane sole is stable on various surfaces, whether it is wet grass in the forest or smooth stones in the mountains, they are not afraid of temperature changes, they perform well on hot asphalt. Sizes: 39-45 The height of the berets is 24.5 cm. Gender: male Season: summer Upper material: genuine leather + Cordura (black), artificial leather tongue Lining material: unlined Bottom material: polyurethane Sole attachment method: stitched Type of shoes: berets Size chart cm 22.5 23 23.5 24.5 25 25.5 26.5 27 27.5 28.5 29 29.5 30.5 31 40 41 42 43 44 45 46 47 48 49 UK 3.5 4 5 6 6.5 7.5 8 9 9.5 10.5 11.5 12 13 13.5 Finding your size Determine your size as follows: Place your foot on a clean sheet of paper. Mark the extreme borders of the foot. Measure the distance between the outermost points of the foot. Find the appropriate size in the table above.

Classic style Loose fit Worn loose Shoulder straps can be used Adjustable waistband with side elastic bands 2 chest pockets Material: 67% Polyester 33% Viscose

Police windbreaker. This statutory police windbreaker, thanks to the use of high-quality membrane fabric with a density of 240 gr. will be able to protect employees of the Ministry of Internal Affairs from any adverse weather phenomena. A big feature of this jacket model is wind resistance and moisture resistance. A hood is folded inside the stand-up collar, which can be easily adjusted along the front. Elasticated cuffs, an adjustable waistband, and a durable zipper closure hidden by a fabric strip with rivets can also protect against bad weather. Along the perimeter of the shoulder girdle, the product is complemented by sewn-in red piping. On the shoulder seams on the button there are shoulder straps intended for attaching distinctive signs. color dark blue main features: MIA form material membrane wide dimensional grid CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: membrane Composition: P/E Density: 240 gr. Cuffs: yes Pockets jacket/pants: yes/no Seasonality: all-weather Additionally: statutory police windbreaker

Classic style Shoulder straps can be used Worn loose Waistband adjustable with side elastics 2 chest pockets Material: 67% Polyester 33% Viscose

Lightweight demi-season boots with an upper made of durable hydrophobic leather and a flexible rubber sole with a large embossed tread will find their place in the wardrobe of any employee of various law enforcement agencies, professional tourists and people who are fond of outdoor activities. A thick PVC mesh is used as a lining. The toe and heel of the boot are reinforced with a special thermoplastic material to keep their shape. For greater comfort, there is a neatly sewn-in reliable zipper on the inside of the boots, which allows you to take off and put on the boots without using lacing. The deaf valve prevents foreign objects from entering the boot. ASSAULT BOOTS OF URBAN TYPE Continuation of the legendary "COBRA" series. Used in all special divisions of the Russian Federation Top combined: hydrophobic leather (1.2-1.4 mm), “DRYWALKSYSTEM” (R) (CJSC “RUSSIAN KOZHA”) + elastic genuine leather on the top. Lining: mesh. Sole: rubber of increased wear resistance (Italy), BUTEK 1. Sole fastening method: adhesive. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 38-46. A deaf valve protects the leg from environmental influences (dust, dirt) On the inside of the birch is molded “Lightning”. High-speed lacing. Color: black. Weight: 570 gr. (1.2-1.4 mm), "DRYWALK SYSTEM"® (CJSC "RUSSIAN KOZHA") + elastic genuine leather on the tibia Lining material mesh Sole fastening adhesive Metal arch support Toe and heel reinforced from thermoplastic material Sole material rubber of increased wear resistance BUTEK 1, (Italy ) Available size range 40-46 Shoe color black Lacing type speed lacing Valve type blind valve Molded zipper on the inside of the shoe is present

Jacket and trousers. Jacket with a zipper, shoulder straps. On a sleeve a patchpocket on a lightning, an internal pocket for documents. Trousers with stitched creases and loops for a wide belt. Gender: male Season: summer Main color: black Material: Blended (50% cotton, 50% polyester), pl. 215 g/m2, VO Material top fabric: Blended (50% cotton, 50% polyester), pl. 215 g/m2, VO Lining material: 100% polyester Normative and technical documentation: GOST 27575-87 Suits for men to protect against general production. pollution and fur. Fastener: "zipper" Country: Russia Size chart Male size Bust, cm Waist, cm Hips, cm 44/46 86-94 76-84 94-100 48/50 94-102 84-92 100-106 /54 102-110 92-100 106-112 56/58 110-118 100-108 112-118 60/62 118-126 108-116 118-124 Height Growth of a typical figure, cm Growth interval of a typical figure, cm 1 -2 158-164 155.0-166.9 3-4 170-176 167.0-178.9 5-6 182-188 179.0-191.9 Women's size Chest, cm Waist, cm Hips, cm 40/42 78-86 60-64 86 -92 44/46 86-94 68-72 94-100 48/50 94-102 76-80 102-108 52/54 102-110 84-88 110-116 56/58 110-118 94-100 118-124 60/62 119-126 104-108 126-132 Female growth Height Height of a typical figure, cm Growth interval of a typical figure, cm 1-2 146-152 143.0-154.9 3-4 158-164 155.0-166.9 5-6 170-176 167.0-178.9

Description: 2nd and 4th protection class III and a special climatic zone - anatomical cut - high belt - detachable straps with a high back on a fleece lining - comfortable design of the shoulder straps - reinforcement pads on the knee - welt and overlay valves - branded chevron on the valve - side slits of the trousers with a zipper Climatic zone: I zone, II zone, III zone, IV zone, "Special" belt Color: black Materials: main: "Taslan" (100% polyester) lining: 100% polyester insulation: synthetic winterizer pl. 240 g/m² Standard: TU 8570-001-72179571-2011 Height: 158-164, 170-176 Size: from 80-84 to 120-124 Protective properties: against abrasion against general pollution from low air temperatures and wind : do not use electric dryer do not iron do not bleach wash in warm water Cleaning based on perchlorethylene Weight 1 pc. 0.78 Volume 1 unit 0.017 (m3) Quantity of goods in the package: Pack of 10 pcs Volume of 1 package: 0.17 (m3) Certificates:

LIGHTWEIGHT BOOTS WITH HIGH TIRES Top combined: genuine chrome leather (1.4-1.6 mm) + high-strength fabric made of textured 1000D nylon thread. Lining: non-woven, abrasion-resistant and quick-drying high density (150gsm). Sole: TEP (±40°С), 2050. Sole fastening method: adhesive. Supinator: metal. Toe cap and heel counter: Reinforced thermoplastic material. Sizes: 38-47. The deaf valve protects a foot from influence of environment (dust, dirt). Speed ​​lacing. Soft edge. Black color. Weight: 535 gr. Specifications Lightweight ankle boots. Model Tropic 3501 Producer BUTEKS Country Belarus Top material genuine chrome leather (1.4-1.6 mm) + high-strength nylon fabric 1000D Lining material hygroscopic and wear-resistant fabric (150 g/m2) Sole fastening glued Instep support metal Toe and back reinforced from thermoplastic material Sole material TEP (±40°С), 2050 Available size range 38-47 Shoe color black Lacing type speed lacing Valve type deaf valve Soft edging present

The combat suit offered for purchase is an almost complete copy of the ACU suit that the US Army has been using since 2005. In a very short time, it has become so popular that it is used by both military elite units and fans of military sports such as airsoft. The costume is made of high quality cotton/polyester/35 blended fabric with a density of 210g. on 1m2, in the colors of the experimental A-TACS FG camouflage, which is used by various private military companies. The costume consists of a jacket and trousers. The jacket is fitted, so it is more convenient to wear it tucked into trousers with attached equipment. In the area of ​​​​the shoulder blades there is a special fold, for greater mobility of the hands. The central zipper is double-sided, duplicated by a valve with Velcro fasteners, two oblique flat pockets on the chest are intended only for carrying documents, two patch pockets on the sleeves are used for the little things necessary for the fighter. On the left forearm there is a pocket for three ballpoint pens. For the convenience of wearing body armor, the collar of the jacket is made stand-up so that the equipment does not rub the neck. It fastens with a textile clasp. It should be noted that, unlike the original, the infrared marker mounts have been removed from the jacket, and the textile fasteners on the collar are softer and more comfortable. The sleeves of the jacket are fixed with a Velcro fastener. The jacket has seven fasteners for information about the rank of a fighter, his blood type, etc. Elbow reinforcements are made in the form of a pocket, with the possibility of completing them with a rigid insert. Trousers of loose fit, with wide belt loops, an additional tightening of the belt with a thin drawstring is provided. The width of the trousers fastens with buttons, on the sides at the waist there are loops for tightening, which is also not in the original form. There are eight pockets in the trousers of the uniform. Two large cargo pockets are able to accommodate additional ammunition if necessary, two small pockets on the calves are ideal for carrying a multi-tool and a dressing bag, access to them in a sitting position is easier than any other. All pockets on the trousers, except for the mortise ones, are covered with flaps. Two side slit pockets are traditionally used for household items, and two back pockets remain "in reserve". The loaded parts of the trousers are reinforced, in front, on the knees, the use of a rigid insert is provided. The bottom of the trousers is pulled with a thin braid. color A-TACS FG Main features: analogue of the NATO suit removed IR Velcro mark on the collar softer than the original soft fabric on the trousers drawstring loops CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: blending (lux) Composition: 70pe / 30 hb Density: 270 gr. Cuffs: Velcro Sealing elastic bands: no Pockets jacket / trousers: oblique pockets on the chest Seasonality: all-weather Additionally: a copy of the NATO suit

The light suit of the Ministry of Emergency Situations is designed to provide comfortable service in hot weather. The suit of the Ministry of Emergency Situations consists of a cropped jacket and trousers with orange piping. The fabric of the suit does not fade, does not become electrified, and retains an excellent appearance for many seasons. SPECIFICATIONS For hot weather Statutory fit MATERIALS Gabardine (100% polyethylene) Material pattern example:

A cropped jacket with a large number of pockets and cuffs on the sleeves perfectly protects against the cold and does not hinder movement.

Material: Polyester 65% , Cotton 35% Fabric very fade resistant Weave: Twill 2×1 Fabric weight: 245 g/m2 Fabric dyeing: Dispersion active, Japanese technology, super durable WR - water repellent finish

Material: wool mixture - Classic trousers with piping along the side seam. - 6 belt loops on the waist. -Two side pockets. - One welt pocket with a flap on the back half of the trousers. - Red piping along the side seam

Smok olive costume. The smoke suit was first used in large numbers by the British Special Operations Forces during the Falklands War in 1982. The uniform design proved to be very successful, and is now one of the most common in the warring special forces. This version of the demi-season smok suit is made of high-quality polyester/cotton blend 70/30 with a density of 240 g. per 1m2 olive color. The suit consists of a jacket and trousers. The jacket is equipped with a deep hood, long, below the waist, has eight pockets. Four cargo, one sleeve, two voluminous frontal with a zipper for carrying additional ammunition, and one internal waterproof for documents. The cargo and sleeve pockets are closed with flaps on a large English button, which makes it easy to open the pocket in a hurry, with hands in shooting gloves, and in other extreme conditions, when every second counts. The elbows of the costume are reinforced with an additional layer of fabric, the sleeves are equipped with wide Velcro fasteners. The front zipper is duplicated along the entire length with five English buttons that fix the windproof valve. Adjustable drawstrings are provided in the waistband and along the edge of the jacket, for a tighter fit to the equipment and to the figure. The trousers are made loose enough not to interfere with the fighter, the knees are reinforced with an additional layer of fabric. The belt has two additional drawstrings on the sides for a more precise fit. The trousers have four pockets. Two slotted, and two overhead cargo, covered with valves on a large English button, in which additional property of a fighter can be carried. A drawstring is provided at the bottom of the trousers, which firmly fixes the trousers over combat boots. olive color Main features: comfortable pockets zipper doubled with buttons ties and cuffs comfortable tailoring adjustable hood CHARACTERISTICS CHARACTERISTICS OF THE SUIT Material: ripstop Composition: 70pe /30 hb Density: 240 gr. Cuffs: Velcro Sealing elastic bands: ties Pockets jacket / trousers: yes / yes Seasonality: demi-season Additionally: additional pockets, multitasking use

Classic style Shoulder straps can be used Worn loose Waistband adjustable with side elastics 2 chest pockets Materials: 67% Polyester 33% Viscose

Description: - jacket and trousers - reinforcements in the elbows and knees Colour: dark blue with cornflower blue trim Materials: Blended fabric, square 210 g/m2, VO Standard: GOST 12.4.280-2014 Height: 170-176, 182-188 Size: from 88-92 to 120-124 Protective properties: from abrasion from general dirt Care instructions: Iron at medium temperature do not use electric dryer do not bleach wash in warm water Cleaning based on perchlorethylene Weight 1 pc. 0.9 Volume 1 unit 0.0048 (m3) Quantity of goods in the package: Pack of 5 pcs Volume of 1 pack: 0.024 (m3) Certificates:

Officer's cap of the Armed Forces of the Russian Federation with a sea-green top, red band and red piping. The cap is completed with a cockade and a metallic filigree cord. The height of the crown is 7 cm. The cap is produced within 3-5 working days.

Women's fur hat for employees of the Police of the Internal Service. The cockade is not included. The hat is made of natural sheepskin and high-quality felt in dark blue. Along the edge of the felt cap there is a finishing edging of red color.

Filtering dust respirators

Respirators "Kama-200" (Breeze 1101), F-62Sh

Respirator "Kama-200"

Purpose

Anti-dust respirator "Kama-200" is designed to protect the respiratory system from harmful substances in the form of aerosols: vegetable, animal, mineral; dust (mining, metallurgical, silicate, cement, tobacco, etc.); protects against poisoning by various types of synthetic bleaches, detergents and powdered fertilizers, etc.

Compound

Respirator "Kama-200" is a comfortable and convenient half mask. It consists of a valveless filtering half-mask with obturator, nose clip and two twill straps to which an elastic cord headband is attached. The filter material is perchlorovinyl fibers with an electrostatic charge, sewn onto gauze, i.e. from polymeric filter material FPP ("Petryanov filter").

Characteristics

The respirator is used at dust concentrations up to 100 mg/m. The multiplicity of exceeding the MPC of aerosols is not more than 100 with a particle diameter of at least 2 µm, and not more than 200 with a particle diameter of more than 2 µm.
The average service life is 2 work shifts. Warranty period of storage - 3 years.

The Kama-200 respirator is not designed to protect the respiratory organs from vapors and gases of harmful substances, as well as from organic dissolved aerosols. It is not recommended to use the Kama-200 respirator to protect the airways from highly toxic dust or flammable substances, tapa naphthalene or iodine. Including not suitable for use in frost or rain.

Weight - 20g.

Respirator "F-62Sh"

The F-62Sh respirator consists of a rubber half mask with a headband, a knitted obturator, an inhalation valve and an exhalation valve, one replaceable antiaerosol filter. The presence of shutters on replaceable filters allows for the removal of coarse dust and allows you to regenerate the filter without disassembling the respirator. The design of the respirator provides for the possibility of placing goggles on the face if necessary to protect the eyes.

A replaceable filter element is supplied with the respirator, but can also be supplied separately under an agreement with the consumer.

Respirators are made with a half mask of three sizes: 1, 2, 3.

The size is indicated on the outer surface of the half mask.

Purpose:

The respirator is intended for individual protection of the human respiratory organs from various types of dust and aerosols present in the air:
- vegetable (hemp, cotton, wood, tobacco, flour, sugar, etc.);
- metal (iron, cast iron, steel, copper, lead, etc.);
- mineral (coal, emery, cement, glass, lime, dust of pigments and fertilizers, etc.).

It is recommended to use it for works of moderate severity in all climatic zones at temperatures from -40°C to +40°C and relative humidity up to 98% with a dust concentration of no more than 500 mg/m 3 and an oxygen content of at least 18%.

F-62Sh respirators do not protect against gases and vapors of harmful substances, aerosols of organic solvents, and are also not recommended for protection against dust of highly toxic and flammable substances (naphthalene, iodine, etc.).

Specifications:

Characteristic
Initial inhalation resistance at a volumetric air flow of 30 l/min., Pa, not more than
Exhalation resistance at a volumetric air flow of 30 l/min., Pa, no more
Oil mist aerosol penetration coefficient, %, max
Efficiency of air purification from dust, %
Average service life of one set of filter cartridges, change
Limitation of the field of view, %, no more
Weight of the respirator, g., no more

Warranty period of storage - 3 years.

Filter for F-62Sh respirator

Designed to protect respiratory organs from silicate, metallurgical, mining, coal, tobacco dust, dust of powdered fertilizers and intoxicants, as well as other types of dust that do not emit toxic gases. Widely used by miners.