How to make a paper confetti popper? How to make a paper clapperboard with your own hands. Step-by-step instructions, origami scheme with confetti, from A4 sheet, notebook, bottle and ball

What holiday can do without loud and bright firecrackers? Made by hand, it creates an atmosphere of celebration and genuine joy. And you can easily provide yourself with this pleasure even on weekdays by learning how to make a paper clapperboard. Children will be especially happy with such a craft.

Who at school did not play crackers made from sheets of notebooks? This entertainment requires a minimum of time and cost (after all, a notebook sheet was enough!), And joy and smiles are just a sea. In fact, making paper crackers is the embodiment of the ancient Japanese origami technique. Recently, this art is experiencing a rebirth among lovers of paper crafts. Such a boom is associated with open access to the Internet, where, among other origami instructions, attention is also paid to the favorite children's fun - how to make a paper clapperboard with your own hands.

Clapperboard paper

About ten years ago, school teachers constantly reproached students for skinny notebooks, in which half of the sheets were missing. And this paper was used to make crackers. However, notebook sheets are too thin for this kind of origami. Therefore, it is better to take xerox paper with a density of 80. Wrapping paper or thick sheets resembling thin cardboard are also suitable. You can choose any color of the toy - fortunately, the tint range of paper allows.

How to make a paper clapperboard: step by step instructions

A single cracker is made in a couple of minutes. The main condition is to iron all the folds well with your fingers. And, of course, the sheet of paper must be perfectly flat.

Instruction:

1. Fold A4 sheet across.
2. We unfold it and bend all 4 corners inward to the center.
3. Fold across the first fold again.
4. The resulting trapezoid is folded in half and unfolded.
5. Bend 2 corners of the base to the center of the figure.
6. We iron well 3 fold lines - the central one and 2 at the base.
7. We take the cracker by the tails of the base, turning the craft away from us. And we drop our hands. The air will open the inside pocket and a loud bang will be heard.

Read also:

Original double clapperboard

If it seems to you that the sound of a single craft is not strong enough, then try making a double cracker.

Instruction:

1. Fold a sheet of paper in half horizontally.
2. We unfold and bend the corners to the center in the form of the roof of the house.
3. Fold along the first fold.
4. The resulting sharp corners are bent inward to the center.
5. Fold in half along the long side of the figure.
6. We take the cracker by the sharp tail and shake it for a loud and frightening sound.

Loud cardboard clapperboard

A loud cracker can also be made from wrapping paper and cardboard.

Materials:

• 2 cylinders from toilet paper rolls;
• colored wrapping paper;
• a piece of cardboard (A5 format is enough);
• PVA glue;
• scotch;
• awl;
• lace;
• confetti (optional)

Instruction:

1. Trace the diameter of the cylinder on a piece of cardboard.
2. Cut out the resulting circle and glue it to one hole of the cylinder.
3. We cut out a rectangle from paper equal to the circumference of the base, and glue the workpiece with it.
4. We make a cap for the second cylinder by repeating steps 1-2.
5. We cut the second cylinder so that we get a small lid (about a quarter of the cracker base).
6. We also cover it with wrapping paper.
7. We make a small hole in the center of the lid with an awl.
8. We stretch the lace into the hole, tie one end in a knot so that the lace does not pop out.
9. We close the lid tightly, pull the string - the cracker opens with a sound. The craft is ready.

If you want to improve the toy, you can pour confetti into it.

We decorate a children's holiday

From office colored paper, you can make excellent crackers for a children's party. The children will surely like the product in the form of a candy, in which there will be a lot of colored confetti. True, you should not expect too loud sound from such a toy.

Materials:

• sheet A4;
• pencil;
• ruler;
• 2 laces;
• awl;
• scissors;
• PVA glue;
• confetti.

Instruction:

1. On sheet A4 in a horizontal position, we draw 6 vertical lines at the same distance from each other.
2. Cut off the excess paper.
3. At an equal distance from the edges on each line we make a puncture.
4. We bend the sheet along the drawn segments.
5. We pass through the holes along the lace.
6. Glue the 2 extreme edges together.
7. We tighten one end of the "candy" with a cord.
8. Pour in confetti so that the cracker is 2/3 full.
9. We tighten the second end with a cord.

To test the cracker, you need to pull 2 ​​laces at the same time.

It is not necessary for the festive fireworks to shoot firecrackers loaded with confetti and fill the entire apartment with small pieces of paper. A paper clapperboard that does not contain any explosives can also clap loudly enough. She will add fun to the atmosphere of a common holiday: someone will jump in surprise, and the rest will laugh merrily.

How to make a do-it-yourself paper clapperboard, so spectacular, but completely safe, our video tutorials will tell in detail. The paper art of origami has in its stock such an unusual weapon that does not strike anyone, but amuses everyone. Try to repeat all the actions of the narrator, and you will get an interesting cracker.

To make an origami paper clapperboard, you will need a standard A4 sheet of paper:

• at first it folds in half lengthwise, which results in a dividing line;
• all corners of the sheet are bent to this line, after which the sheet is folded in half so that the folded corners are inside;
• the whole structure is bent so that the sharp ends are stacked with each other;
• having unfolded the workpiece, we apply the corners to the line outlined after the inflection;
• Bend the resulting square in half so that the folded corners are outside.

For the cracker to work, it is enough to take it by the tips of the corners and wave the toy sharply in the air. Under the action of the air flow, the inside of the cracker will turn outward, making a loud bang. The clapperboard can be used many times, it is enough to fill in the turned out parts and repeat the swing. The harder you swing the clapperboard, the louder the clap will be. Unlike all kinds of pyrotechnic entertainment, a paper clapperboard is completely safe: its sound effect is not capable of harming anyone, except to scare a little if the clap sounds unexpectedly.

Video lesson:

We will show you how to make a double paper clapperboard that is exceptionally loud and very easy to make. It can be made from a double notebook sheet or from a standard A4 sheet. Despite its exceptional simplicity, the cracker has the ability to regulate the sound intensity: it has a special paper ledge, the size of which can be changed. In accordance with this, the strength of the clap will also change: from weak and muffled to loud, which can really frighten if you clap next to someone unexpectedly.

• To begin with, a sheet of paper is folded in half along the long side.
• One of the halves, in turn, folds in half, the resulting strip folds in half.
• Next, the sheet is folded in half so that the folded strip remains outside. The folded sheet along the edge of the strip is bent alternately in both directions.
• The fold line of this sheet folds inward without forming a kink.
• The resulting sharp end is clamped between the halves of the folded strip.

The depth of penetration of this end into the strip determines the volume of the clap. After cotton, it is enough to reinsert the paper in the middle between the strips and adjust the depth of its penetration, which corresponds to the strength of the cotton. You can repeat this action an unlimited number of times.

Video lesson:

The art of origami allows you to create not just beautiful and multidimensional figures of animals or birds. If you want to spend time with uncomplicated and noisy entertainment, then paper crackers are created especially for you. Their production requires only a couple of minutes, a sheet of thin A4 paper and a little perseverance. Paper crackers are deafening and completely safe. The simplest of them can be used at recess, for entertainment, at holidays, and also to annoy neighbors.

A sheet of paper for a cracker should not be dense. A newspaper or notebook sheet is best, as well as coated paper of any color. Before starting work, the paper sheet must be smoothed out on a flat surface, then folded in four and unfolded again. A pair of folds will appear on it, one of which will be longer than the other. Bend the four corners of the sheet to the line of the longer fold. To put it simply, the corners need to be folded in the form of a “house”. Now bend the resulting configuration along the longest fold line, getting something like a trapezoid. Next, bend its corners exactly to the middle, getting something like a square, which consists of two triangles. This square should be folded in half so that the paper triangles are inside. It is they who will carry out cotton when the firecracker is triggered. Its creation has come to an end. In order for the paper clapper board to work properly, it is taken by the sharp edge and shaken sharply, waving it from top to bottom. Then she straightens up and slams deafeningly. After the “explosion”, it can be returned to its original state again and used as needed until the paper breaks. Sometimes paper products misfire and don't make a loud bang. In order for such a cracker to work again, it will be necessary to slightly loosen the fixing element at the bottom. Also, do not smooth it too much, so as not to prevent the flapping part from falling out of the fixing element.

There is another way to create a paper clapperboard. She claps differently, louder than usual. In addition, cotton does not sound during the swing, when the paper comes into contact with the surface. So, let's start manufacturing. First you need to find a sheet of loose paper twenty centimeters long and twenty-eight wide. If this is not the case, then an ordinary notebook, torn from the middle, will do, only cotton in this case will be quieter. Lay this sheet horizontally, measure the bottom five centimeters on both sides of the sheet and wrap it, making it shorter by this length. Again, measure the same amount and bend the already tucked part up. You will still have 5 cm of unfolded paper. If it's a little less, don't worry.

Now is the time to fold the paper in half lengthwise. Do this carefully so that the fold comes out even. Remember that you need to bend the sheet inward, not outward. Holding the sheet by the edges of the unfolded portion of the paper, pull down until they are just below the folded edges. A small triangle of not yet folded paper will stick out at the top, and the cracker should have two pockets, shaped like diamond faces. Grab this little protruding triangle of loose paper. Don't squeeze your hand too hard. It remains to lightly slam the resulting cracker on the table, while releasing the not bent edge. It will create a flapping effect, which can be enhanced by straightening two paper "pockets".

Paper crackers are a favorite entertainment for children. Their creation will not only take a restless baby for a long time, but will also help him to develop fine motor skills and imagination.

New Year is an exciting and fantastic holiday. Every time I want to celebrate it in my own way, to bring an original zest to the celebration of this day. To surprise and delight your children, you can buy firecrackers at the store. However, their use is dangerous, and unforeseen situations can overshadow the fun. Try to create simple and bright products yourself. very easy to do by hand. However, it will definitely become a great decoration for the holiday.

What materials will be needed?

To make a beautiful craft, you need to prepare a cardboard roll, for example, from used toilet paper, colored and papyrus paper, adhesive tape, glue, thread, rhinestones for decoration and confetti. As filling, you can use mugs of bright colored paper made with a hole punch, small sweets or paper money. In general, what is enough for your imagination.

How to make a clapperboard out of paper?

1. Start making crafts from the bottom cover of the cracker. To do this, you need to cut a circle out of cardboard so that it completely covers the hole in the pipe. We stick it on colored paper to then attach the remaining ends to the workpiece.

2. Now we thread the thread through the center of our cardboard circle, fasten it inside with adhesive tape. This is the very part that you will need to pull so that a surprise spills out of the craft.

3. To understand how to make a cracker out of paper, it remains to fill the pipe with confetti and make the top cover. Cut out a circle, cut it along the radius and connect it into a cone. This is the future clapperboard cover. It remains to glue it with the pipe.

4. Our double paper clapperboard will look original if you decorate it with colored or papyrus details on the outside. You can use rhinestones, ribbons or beads of various colors, sizes and textures. We attach all the details of the decor with glue or tape. Here's how to make a paper clapperboard with your own hands in just a few minutes.

How to use the clapperboard?

Made multi-colored firecrackers can be hung over your head on a rope, at a sufficient distance so that the child can reach the thread. That is why you should not use heavy elements for filling. In the event of an "explosion", they can get into the eyes or in the respiratory tract. It is best to use light confetti. And then, pulling the rope, enjoy the charming view of fluttering paper. Surprise confetti can be purchased at the Stationery store or made on your own using a regular hole punch.

Conclusion

Now you know, the manufacturing process will be more interesting if you create with the whole family. Children will be happy to make colorful confetti with an ordinary hole punch. Such a cracker can be made of any size: from miniature to huge, it all depends on which pipe will be used in its basis. If you do everything correctly, then the New Year's holiday will definitely succeed, and guests and friends will be surprised and satisfied.

Still, how interesting it was to study at school! How many different funny stories can be remembered from this wonderful period of time. After all, then all these “fancy” super gadgets did not exist (except perhaps the game “Electronics”, where the wolf caught eggs, remember?), And we entertained ourselves in completely different ways: we made various crafts from paper and not only from it, from clothespins from pasta from the pen, and much more interesting things. Today I wanted to “present” one of such super hits (as they say today) of that wonderful time - a paper cracker, which can be very easily made from almost any paper. This is done very quickly and the whole technology is remembered almost after the first time. It is best to use such a loud paper clapperboard indoors, where it sounds most impressive. If you use it outside, then its "loudness" will be much lower.

We make a loud paper clapperboard. Simple instructions with a hand-drawn diagram

So, let's first figure out which paper is best to take for training. In principle, absolutely any paper, but all this comes further with the experience of making such crackers. In the meantime, it is best to take an ordinary notebook and tear out a double sheet from its middle. It is from this rectangular sheet that we will make such a cracker. If you have a simple A4 sheet on hand, you can use that as well. In general, the sound that your clapperboard will play will just depend on the type of paper you use. The notebook sheet claps very loudly, but, however, it is very soft and therefore such a cracker breaks rather quickly. But, this is certainly not a big drawback, because you can very quickly make a new cracker, maybe even louder.

When you prepare the notebook sheet, you will need to unfold it to its full width, and then gently bend the corners on each side of it, as they say, “house”. This stage is shown in the figure.

Now your paper clapperboard is completely ready. To try it out, you will need to take it by the tip and shake it strongly, or rather, raise your hand with the clapperboard up and sharply lower it down.

How does a paper clapper work? With such a sharp movement, the paper “pocket” that is inside it flies out and abruptly “slows down”, as it is held by the cracker itself. It is this sharp movement, when the paper “pocket” comes out of the cracker, that gives a rather loud sound. And he is really loud, if you do this next to a person who does not expect anything like this, then most likely he will be scared (I did not tell you this!). So it is better to use such a cracker when you are not threatening anyone, and when all the people around you are ready for such a sharp and loud clap.

If something is not clear, then watch this video, where all this is clearly shown.

You can also make a double clapperboard. Accordingly, the strength of cotton can be increased. Try this option too. How to do it, you will be shown here. We look.