Snowflakes from white napkins. How to make a snowflake from a napkin

Good day to all!

The most wonderful holiday is approaching - the New Year. Many are preparing for it for a month. Say something too early? However, it is never too early to acquire jewelry, and even vice versa. Especially if you decide to make some decorations with your own hands, for example. What can be interesting to do. First of all, it is, of course, snowflakes. What are we making them from? From paper.

In this article we will try to make paper snowflakes, as well.

It is quite easy to make snowflakes out of paper. You need paper and scissors. We take paper, fold it several times to make a triangle. Like this:

Now it remains only to cut out the patterns. Draw the desired pattern along the edges of the triangle and cut it out. After that, we unfold the paper and get a beautiful patterned snowflake.

From what pattern you draw, this will be the snowflake. There is no limit to the imagination here. You can cut, for example, such a snowflake:

Or like this one:

In addition to ordinary snowflakes, you can make a three-dimensional one. Here the production scheme is somewhat different.

If we make a snowflake of six rays, we will need six sheets of paper, if we make an eight-ray snowflake - eight, etc. On each sheet of paper, cut out a square measuring 10x10 cm or more. The larger the size of the sides of the square of the blank, the larger the snowflake itself will be, respectively. Now, at some distance from each other, draw parallel lines to make several squares inside a sheet of paper. Approximately as in the diagram.

The next step is to take scissors and make cuts along the drawn lines (red). We do not cut it out, but we only cut it so that these squares are fixed from two opposite corners.

Next, take the central square (shown by an arrow in the figure) and fold its edges into a tube, towards the center. Glue the ends. Then we turn the sheet over and on the reverse side we do the same operation with another strip. Then we turn over and fold the tube again, and so as many times as you have drawn squares.

In the same way we make all the other blanks. After that, we fasten them together and, as a result, we get a snowflake.

We cut out snowflakes from paper according to patterns that can be printed

You can cut snowflakes not only by folding paper. You can pick up special templates, print, and then cut out your craft using them.

Another fairly simple option.

And this snowflake template is a little more complicated.

If you are bending a piece of paper, but have no idea what pattern to draw to make a beautiful pattern, then here are a few templates.

Or, for example, like this.

This template is a bit complicated, but the result is a beautiful snowflake.

Several templates at once, some of them are simple, some are somewhat more complicated. However, patience and perseverance will help create a masterpiece. And, of course, children, how to cut snowflakes without them.

And a few more templates

Also beautiful, even somewhat openwork patterns.

Here are some great templates you can use.

Schemes for cutting beautiful snowflakes

In this section, you can see some patterns for making snowflakes, according to which you can cut out beautiful crafts.

According to this scheme, you can cut a snowflake, following the step-by-step drawings.

And here is another selection of schemes from several beautiful patterns.

According to this scheme, you can cut several different snowflakes.

Another example is how to fold a sheet of paper and cut out a snowflake.

This diagram shows how to cut out unnecessary parts of the paper (shown in color) to get a beautiful pattern.

Variant of the snowflake scheme with hearts.

And look at this diagram, quite interesting and original drawings.

And according to this scheme, we make a snowflake not only from a square sheet of paper, but also a round one.

Here are some wonderful schemes to choose for manufacturing.

Simple snowflake patterns for beginners in origami technique

Origami is the manufacture of paper crafts without cutting. Snowflakes can also be made using this technique. Here are some diagrams.

In this version, scissors are used, but only to make cuts.

You can make such a snowflake out of paper:

To do this, use the following diagram:

In this version, you make a snowflake from prepared modules.

Then from them we collect the snowflake itself.

Try another scheme by which you can fold a snowflake.

It was all snowflakes, shall we say, in 2-D format. But voluminous snowflakes are also popular.

Video how to make voluminous paper snowflakes with your own hands (video)

Volumetric snowflakes look, of course, more beautiful and original. And if they are also made in a large size, then they will look quite impressive.

And here, watch the video, which clearly tells about the manufacture of such a snowflake.

We make snowflakes from paper strips with our own hands

Volumetric snowflakes can be made using colored strips of paper. For example, you can do something like this:

To do this, take colored paper (colors can be any, to choose from). We cut strips 29 cm long and 0.5 cm wide. We cut about 20 strips.

Now we put strips in the form of a cross, 4-5 pieces, alternating colors. We put them intertwining with each other.

First, we glue the most extreme strips with each other (they are yellow in the figure) we should get something like an auto-decoupling on the map.

The remaining strips (white in the figure) are glued to the corners of the opposite yellow petals. As a result, we get a snowflake, as in the sample at the very beginning of the description.

An easy way to make 3D snowflakes step by step

Volumetric, or 3-D snowflakes look a little better than simple ones. Let's try to do this.

Take a square sheet of paper and fold it several times until you get a triangle. You need to make six such triangles. And they should all be the same. Now, on each triangle we draw parallel lines at a distance of about 1 cm. The number of such lines depends on the size of the triangle and there can be three or more of them. Now we cut through these strips from one edge to the other, but, of course, not to the very end.

We turn the triangle back into a square and fold its central part and glue it together.

We turn the square over with the other side and glue the next notched square in the same way.

Flip and repeat. And so on until we glue all the cut strips. A similar procedure is carried out with all blanks. After that, we fasten together first three figures, then the remaining three.

As a result, we get such a snowflake.

or such.

Its size depends on the paper size. This craft requires a little more time and more painstaking work compared to simple snowflakes. But the result is worth it.

Quilling snowflake master class for beginners (video)

Quilling is a technique for making paper crafts that are cut into strips and rolled. After that, all these twisted blanks are connected and we get the intended craft. For example, such wonderful snowflakes.

How to make snowflakes using quilling technique, see this video

So, we looked at various ways to create New Year's snowflakes. Choose, craft and decorate your homes. Good luck!

Which of us in childhood did not cut out all kinds of snowflakes from napkins. This is a very exciting activity. Wielding scissors, you can get a unique masterpiece, and then stick it to the window, simply by moistening it with water. It is so nice to watch the snow-covered street through the window, which is covered with a layer of frost on the outside, and inside is decorated with snowflakes of our own production.

If you forgot how to cut snowflakes from napkins, it doesn’t matter, this article will come to the rescue, which will remind you of the principle of this work. Now you can engage in snow creativity with your children. And two identical snowflakes, for sure, will not work, so do not even try to cut out the twins.

1. Napkins, pencil and scissors are all the tools you need for fun work.

2. Start folding the napkin in half first.

3. Then bend the resulting rectangle in the middle.

4. Then make a diagonal fold. You can stop at this or bend the workpiece again, if the size of the napkin allows it. It is advisable to iron all the folds, so that later it will be easier to wield scissors.

5. Prepare all wipes in the same way.

7. Cut out the part along the lines marked with a pencil.

8. Gently unfold the napkin, try not to tear the paper, because it is very thin. The first snowflake is ready.

9. Do the rest of the crafts according to the same principle.

The final look of the craft.

Patterns on napkins for exquisite winter decorations can be completely arbitrary. Feel free to experiment and enjoy the exciting New Year's creativity and make no less interesting crafts from napkins that will bring joy to everyone around you.

Master class "Snowflake"

Suitable for decorating a room and as a Christmas toy

Paper is one of the simplest, most affordable, easily processed materials. It is not very expensive and very convenient to use ordinary paper napkins in creativity.

When making gifts for holidays such as, for example, “New Year”, we often think about what to give to the most beloved and dear people in the world. The answer is simple: the most expensive and favorite gift for them, which was made by their child!

Perhaps my snowflake will seem very simple to someone, but I want to say that I work with children of 7-8 years old and I need the implementation to be not difficult.

Materials and tools:

Scissors;

A piece of foam;

Glue stick;

Toothpicks;

Napkins.

Snowflake making steps

Cut the napkin into four strips.

Fold each strip in half. Cut the edge opposite the fold line.

Having smeared the tip of the toothpick with glue, we begin to wind the strip. It is necessary to wind in a spiral, evenly distributing it over a toothpick. When a small “tail” remains, grease it with glue and fix it.

Ready rays must be fluffed. In total, we need to cook 8 rays.

Cut out a square of styrofoam

You need to wrap it with a piece of napkin, and fix it with glue.

Now we start sticking the rays of the snowflake.

Napkin, without cutting, fold as in the photo.

Cut out a circle from the resulting square. We make cuts evenly around the circle.

One napkin makes 16 mugs. Divide by 8. Glue together and glue on both sides to a square of foam.

Now the most pleasant moment. It is necessary to tie a thread so that the decoration can be hung.

And now our snowflake is ready !!!

It is very easy to make and takes 30 minutes to complete. Both the child and the mother will be satisfied.

In conclusion, I want to say that snowflakes can be made in different colors. You can sprinkle glitter on them. These are your creative ideas.

It is very nice if you want to make a snowflake according to this lesson))) Thank you for your attention.

The technique of making snowflakes from napkins is actually no different from making them from plain paper. Even a child can easily cope with this task. It is only necessary for one of the adults to show him how you can make beautiful light snowflakes from napkins with your own hands. Which can then be glued to a window, put on a Christmas tree or combined into original paper garlands. And our schemes will tell you which snowflakes will turn out depending on one or another contour for cutting.

How to make a snowflake out of a napkin. Scheme 1

Please note that the photographs shown do not use napkins, but plain white paper. But this is only because in this way it is easier to demonstrate exactly how to fold the blank from a napkin - the paper better preserves the fold lines. And you use an ordinary napkin to make a snowflake - just stock up on them in sufficient quantities. As a rule, paper napkins already have a square shape, which is very convenient. And the size of the future snowflake directly depends on the size of the napkin that you will use.

So. First, fold the napkin diagonally and get just such a triangle.

Now this triangle needs to be folded in half again. You should end up with a smaller triangle.

Take the right corner of this little triangle and fold it to the left, about one third.

And now cover it with the left corner of the triangle bent to the right. Like this.

Cut off the top. You can do this directly or in a semicircle, but then your future napkin snowflake will turn out to be round. If you want it to have pronounced rays, you need to cut the workpiece at a slight angle. Approximately like this.

Many people prefer to cut out snowflakes according to some ready-made templates or stencils. But if you want your snowflake to be unique, unique and inimitable, start cutting it out yourself, trusting only your intuition and imagination. First, you can cut a few pieces of a triangular shape from the sides of the workpiece, then continue to cut out more complex shapes. When you're done - unfold your workpiece - only very carefully. And you will get your own snowflake.

In order for it to be even, you need to lightly iron it with an iron. Once the snowflake has cooled down, you can use it however you like, such as hanging it from the ceiling or hanging it on a window pane.

Schemes to make a do-it-yourself snowflake napkin

Well, for those who do not want to rely on their own imagination and skill, we offer several different schemes for making snowflakes from a napkin. You can apply the drawing you like with a pencil on your workpiece and then cut it according to this drawing. Use sharp nail scissors to cut out small details.

Snowflakes from napkins, at first glance, the simplest among the possible New Year's crafts that a preschool child can do with his own hands. But for experienced needlewomen, we have ideas that are sure to interest them. For example, we suggest using the decoupage technique, the main material of which is a napkin with a thematic pattern.

There are simple and complex, original and ordinary options, how to make a snowflake out of a napkin. You can use these ideas to decorate the interior before the New Year holidays, you can use them to decorate a kindergarten or a classroom at school. Crafts are very simple, but with their help you can create a special winter mood in your home. And you can decorate the holiday table.

The main advantage of the master class is that this material is available for every family. Preschool children can work with it, but we have interesting ideas for adult craftswomen.

How to make a snowflake from a napkin

The simplest option do-it-yourself snowflakes from napkins, is to cut an openwork figure along the contour. By the same principle, we have already created original snowflakes using a white sheet of paper. When working with napkins, you will not be able to cut out small elements, since the material is easy to tear and fine lines cannot be created. Usually napkin snowflakes are rays, consisting of large elements.

Unlike paper, it will be much easier for a child to cut several layers of a thin napkin, so preschoolers most often work with such material. When you try to cut paper folded in several layers, you need to make an effort, press hard on the scissors, and this can injure children's fingers.

It is impossible to draw a contour on such thin paper, so they are cut out along the lines that they represent in the imagination. You will never get two identical ones.

The original solution to the use of these crafts is to decorate the glass on the windows with their help. To fix the elements on the glass, you need to attach a snowflake to the window, and from above, using a spray bottle, spray it with soapy water. Water should be sprinkled a little so that the paper becomes slightly damp, but its integrity does not deteriorate. When it dries, it will be securely "glued" to the glass, and when the holidays are over, it can be easily removed, after which it is necessary to wash the windows from soap stains.

Snowflakes from napkins

It might turn out like this snowflake from a napkin, diagram for which it must be drawn on cardboard. In this case, we will use the decoupage technique, with which you can decorate a dense curly base with napkin elements.

Firstly, in stores with various needlework products, you can find special openwork blanks for such crafts. The blanks are made of wood, they can be decorated using the decoupage technique, they also usually use additional decoration materials: paints, sparkles, glitter to make the snowflake bright and very beautiful. On the blank on one ray there is already a hole where you can thread the cord and tie a loop. The finished craft can be used as a Christmas toy.

Such wooden toys are reminiscent of the old Christmas decorations that were popular in the 30s, and now again flat toys are in demand at New Year's fairs.

If you don’t want to buy a blank in a store, you can make it yourself, but for this we will not use wood (to make a blank from a tree you will need not only special tools, but also special skills), but cardboard, an outline in this case can be cut with scissors.

The contour will be a traditional snowflake, consisting of six symmetrical rays. With a pencil, you need to draw a contour on cardboard, then cut out a six-pointed figure with scissors. On one ray, make a hole with an awl, then we will insert a rope into this hole.

Before proceeding with the decoupage technique, the brown base must be painted with white paint so that the drawing then lays down beautifully. You may need to apply several layers of paint, you can use gouache.

Fulfill snowflakes from napkins step by step, making the necessary pause after each stage so that the base has time to dry or the glue has time to fix. After the base is painted, it must be left for some time so that all layers of paint dry. At this time, you can prepare napkin elements. You need to choose napkins that depict snowflakes, winter landscapes, snow, New Year's patterns. In any case, the choice of motive depends on your imagination.

Then the motifs must be cut out. Each napkin consists of three layers, only the topmost layer is used for decoupage, on which the pattern is applied.

If you decide to use the decoupage technique for decoration snowflakes from napkins, video and photo master classes from our website will help you deal with this original technique for performing various crafts.

The base must be lubricated with PVA glue, attach the cut out element and gently straighten it. Such snowflakes are made double-sided, they are decorated on both sides, but the patterns can be different.