Nice tie knot. How to tie a tie: from simple to unusual ways

Tying a tie is a staple of business etiquette for modern men and gentlemen. There is no doubt that every man should know how to tie a tie. There are approximately 85 options for tie knots, which are necessary if you need to figure out how to learn how to tie step by step. They can go with formal and informal dress codes.

Here is a guide and a photo with which you can understand all the secrets and learn how to make simple and complex knots when you need to tie a tie.

All nodes are different. They come in different sizes and shapes. Depending on what kind of tie, the method of tying a tie is different. For example, to tie a wide tie, only medium knots are used, such as Quarter or Kent. Tie thin ties can be done with simple knots, Windsor or Pratt knots.

All nodes that the instruction offers are unique. To achieve an increase in the image using a simple method, you can use the recommendations. This will make it possible to achieve originality, elegance, be able to tie beautifully. To figure out quickly how ties are tied, you need to start studying diagrams with pictures. It is worth experimenting using a thin or narrow tie. It is necessary to change the shapes and fabrics, colors, patterns of ties in stages.

If you have any doubts about the length of a tie for men, you need to use the tie length calculator. With it, you can calculate the required length, taking into account the growth with the size of the collar. After the calculation is done, you can go buy a tie to apply the classic knot design method.

Ideal tie length

When buying a men's accessory, you need to make sure that the product is of excellent quality. This moment matters if with the help of such an accessory it is necessary to achieve the formation of a business style. There are some requirements for good ties.

How to tie a tie in the simplest "classic" way: diagrams, photos, videos

On the left is the thin end of the tie, on the right is the thick end. It is necessary to overlay the thick part on the surface of the narrow one.

Then, thread the large end of the tie inside the resulting neck loop.
The thin end stretches down and is held under the thin end in the direction of the right hand.
Again we draw the thick end over the narrow one, but already in the direction of the left hand.
Through the neck loop, the thick end is pulled up. From top to bottom, a thin end is threaded into the ear. Make a neat tying of the bundle.

Scheme "classic" node

Video instruction.

Windsor knot: step by step, photo, diagrams, video

When you want to design a tie knot using the classic method, then you should use Windsor. In this case, a triangular knot is formed, which has an elegant, symmetrical shape. Obtaining such a knot is achieved by making a double fastening on the neck loop. When there is no satisfaction in a large bunch, then you need to try ties made from light fabrics. It should be borne in mind that Windsor is advised to design for collars that have a wide neckline.

Scheme of the Windsor node

Video instruction.

"Cross" way

There is another way to simply tie a tie. This knot goes well with long ties. Now it is called "double", "Italian", "square" tie. In the territories of European countries, it is called "Christenses" or "Cross".

Such ties are tied to high collars, which have a minimum height of four centimeters. The Cross tie is paired with cashmere and wool. Accordingly, these types of knots are made in winter. The implementation of the Hanover knot is quite complicated. However, it looks pretty nice. In the photos and videos you can see what happens with a symmetrical knot, similar to a triangle. It is slightly larger than the Windsor, which means it requires the widest possible collar. If the collar is narrow, part of the tie will be blocked by it, an ugly distortion of the shape will occur.

How to tie a cross knot

Video instruction.

"Bow tie" or on an elastic band

They begin tying the knot by throwing the tie around the neck so that the location of the seam is on the outside. It is advised to study the photo well, which explains step by step how to tie a product in the form of a bow tie or a tie with an elastic band. Schemes with step-by-step instructions are attached.

The scheme of how to tie a "bow tie" on an elastic band

Video instruction.

Method "Oriental"

The tie can also be easily tied using the oriental method. However, it is preferred to be used more rarely than other knot design options. Despite their simplicity, such knots have serious drawbacks. For example, when tying such knots with greater responsibility, after some time the shape of the tie changes, it is distorted. Over time, sometimes, completely untied. However, oriental knots are ideal for ties, which were sewn with woven, knitted fabric or wool.

The first thing you notice on a man is a tie. It doesn't matter if it's a business meeting, office work or a date. A tie is an accessory that reflects your inner world, your goals and objectives.

The ability to tie a tie is useful not only for a man, but also for a woman. There are different types of tie knots, some scare with their complexity and number of actions, some even a child will master. Want to learn how to tie a tie step by step and learn more about this accessory? Read our article.

Before learning how to tie a men's tie, consider the main types of these accessories and knots.

Classic ties

A regatta is a tie with a ready-made knot, which you just need to put on and fix with a buckle or elastic band. It is worth saying that such an accessory is not suitable for business meetings at a high level. But if you can't seem to get your tie right, there's no better solution.

As for the Windsor, it is the most popular and easiest knot to train on, as well as an unshakable classic. Wide, massive, symmetrical and neat, it is best made from dense fabric. It is believed that every man should know how to tie a Windsor tie.

Sharpei, ascot and plastron

These types are nothing more than very elegant neckerchiefs made of noble fabrics in the form of stripes. The only difference is how to tie a tie. You can tuck a shawl under the collar and you have an Ascot, you can add a brooch and you have a Plastron, or you can use the Windsor style with frills and you will have a Sharpei.

Such accessories will be appropriate at weddings, balls, evening events, theater premieres and exhibitions.

Butterfly

A neat bow-tie will complement any look and add a touch of irony to the costume, if necessary. There are as many as 3 types of such ties: self-tying, fastened to the collar, and butterflies on a braid / elastic band.

"Herring"

This tie is a strip of fabric that flares out at the bottom. Herring is an even piece of fabric. As a rule, thin, narrow, with a diamond-shaped or rectangular end. Tying a thin tie is much easier than a classic model, which is why Herrings are so popular among young people. Wear them with skinny trousers and fitted shirts. Tie a narrow tie is not difficult.

Tie tying techniques

Knitting a tie with a Windsor knot

How to tie a tie with a Pratt knot

How to tie a Prince Albert tie knot

How to tie a herring tie with a Kent knot

How to tie a tie in a Victorian knot

Tie a Half Windsor Tie

These are the easiest methods for tying a tie. If you are faced with the need to wear this accessory for the first time, it will be useful to remember some rules for tying a tie and wearing it.

How to wear a tie?

1. The color scheme and material of the accessory must be compatible with the clothing.

2. To make the tie look nice, wear it with a long sleeve shirt.

3. The width of the accessory should be optimal in relation to the lapels of the jacket.

4. In no case do not make the narrow part visible from under the wider part. After all, there is a special loop for this.

5. The resulting tie knot should be neat and tight. Don't overtighten it.

6. Skinny ties with horizontal patterns are best suited for slim men. larger - wide with vertical.

Well, and finally: not everyone is given to learn how to tie a tie the first time. Try it, do it according to science (there is an instruction for tying a tie for this) and then everything will work out!

The ability to tie a tie is the basis of business etiquette for a modern man and gentleman. There is no doubt that it is desirable for every man to know how to tie a tie. There are approximately 85 variations of tie knots that are suitable for both formal and informal dress codes.

Do you know at least one way how to tie a tie? If not, we suggest learning how to tie a tie in 12 ways! The visual aid that we have prepared for you will help you easily master simple and complex tie knots.

Pick an interesting knot for yourself and learn how to tie a tie! We wish you success!

An easy way to tie a tie or Kent knot

The Kent or Kent knot is the easiest knot to start with. The knot is suitable for classic and informal styles of clothing for all types of ties and shirt collar shapes.

Click to enlarge the diagram of the Kent knot!

Simple and versatile Four-in-Hand

The Quarter or Four-in-Hand Knot is the most versatile yet easy way to tie a tie. Consists of 7 steps (see illustration), but will suit any occasion and style of clothing. The knot fits classic, medium and wide collars.

Click to enlarge the diagram of the Four-in-Hand knot!

Video how to tie a tie in a quarter knot

We shot a video clip for you so that you can watch live how a tie knot is tied.

Symmetrical Windsor Knot

The Windsor or Windsor knot is a voluminous and symmetrical knot that looks great on a collar with soft corners (like polo shirts), medium and wide collars.

Click to enlarge the diagram of the Windsor node!

Tie the Windsor Knot - Video

Fashionable asymmetry or Prince Albert knot

The Prince Albert or Prince Albert knot is a rather sophisticated and asymmetrical knot for a tie. Looks great on men of thin build. We recommend using a thin tie up to 5-6 cm wide. Suitable for medium, wide and button-down collars.

Click to enlarge the diagram of the Prince Albert knot!

Kelvin knot

The Kelvin or Kelvin knot is named after the physicist and inventor William Thomson, 1st Baron Kelvin - the same one who invented the Kelvin scale. Very similar to the Quarter Knot, suitable for short and classic collars.

Click to enlarge the diagram of the Kelvin node!

Half Windsor knot

The Half Windsor or Half Windsor knot is a versatile knot that is great for wide and tight ties. The knot is fairly symmetrical and works well with wide and padded collars.

Click to enlarge the diagram of the half windsor node!

Knot Pratt or American

The Pratt knot, or Pratt, was invented by Jerry Pratt, an employee of the US Chamber of Commerce. The knot is universal and suitable for a classic collar and with rounded ends.

Click to enlarge the diagram of the Pratt node!

A tie is a stylish accessory and an essential attribute of a man's business, festive and casual suit. Having appeared in the era of the pharaohs, it has undergone many changes before it acquired its familiar form. The ability to tie a tie beautifully allows you to attract attention and look perfect in any situation.

Types of ties for men

A tie is an item of men's wardrobe, tied around the neck in a special way and worn as an adornment that complements a two-piece or three-piece suit, a shirt with a vest or a knitted jacket. It is a strip of fabric made of silk, jacquard, cashmere, wool, tide, linen, microfiber, polyester or other material. In appearance, ties are divided into types:

• classic. This category includes standard models with a length of 132-147 cm and a width of 7-9 cm, narrow herring ties, as well as windsor and regatta ties. The Windsor differs from the standard model in size - it is wider and longer, when tied it forms a large voluminous knot.

The main difference between a regatta tie is that it does not require tying, because it has a fixed knot and simply fastens with an elastic band. It is this model that is part of the uniform of the military, firefighters, police officers and representatives of other services.

The width of a narrow tie is about 3 cm. Such models are usually worn by young men of a slim build with a casual suit;

• for special occasions. These include ascot, sharpei and plastron. An ascot tie is an essential attribute of a men's wedding suit in the United States and Western Europe; it is a plain or small-patterned neckerchief in muted tones, tied with a voluminous knot and secured with a pin. Often worn with a vest made from the same fabric.

Plastron - a wide tie, worn mainly for a wedding. It is tied over a shirt and secured with a pin.

Sharpei - a tie worn for a celebration, is a model similar to a neckerchief;

"butterfly" - a ribbon tie, tied so that its ends form symmetrical ribbons. There are two types: the self-tie bow tie, that is, tied on its own, or the pre-tied bow tie - a tie with a bow tie already tied and fixed. A black bow tie made of velvet or silk is in harmony with any suit, white - with a tailcoat or silk, colored - with a shirt and jeans;

"Bolo" - a tie in the form of a cord with a movable brooch clip. This model is especially popular with Americans who wear it with a denim shirt, suede jacket or casual suit.

How to choose the right tie for a shirt

The tone and pattern of the tie must be selected taking into account the color and pattern of other elements of the suit - a shirt, a jacket.

1. Any tie looks great with a white shirt. For weekdays, you can choose ties made of polyester in dark or pastel colors, for a special occasion - silk, for an informal meeting, models from knitwear are suitable.
2. Ties in contrasting shades are harmoniously combined with colored shirts.
3. A plain tie can be worn with a checkered shirt, as well as models with stripes, polka dots or large diamonds.
4. Under a tie with polka dots or a cage, you should choose plain shirts of the same shade;
5. Ties with floral or fantasy motifs look good in combination with plain shirts.
6. A striped tie goes well with a striped shirt. At the same time, the stripes on the shirt and tie should differ in size and direction.
7. Wearing a tie and shirt in the same color scheme, you should choose ties 1-2 tones darker than the shade of the shirt.

How to choose the right tie for a suit

When choosing a tie for a suit, it is necessary to take into account the color, size and texture of the accessory.

1. It is recommended to choose silk ties with a smooth texture for a summer cotton suit, and from a dense material for a woolen suit.
2. Pastel ties should be selected for light suits, saturated ties for dark ones.
3. For a dark suit and the same shirt, you should choose a light-colored tie.
4. To a dark suit and a light shirt - a tie of dark shades.
5. A dark tie goes well with a light suit and a dark shirt.
6. To a light suit and a light shirt - a tie to match the shirt.
7. The width of the tie should match the width of the lapel of the jacket.
8. Ties in brown, burgundy, pink, yellow, gray and navy are suitable for a blue suit.
9. A gray suit is combined with ties in purple, mint, navy blue or dark gray, black and peach.
10. A light suit is in harmony with blue, red, purple, white, gray ties.
11. A fitted suit with cropped trousers goes well with a tight tie, and oversized suits with wide ties.
12. Large men are recommended to wear wide ties, while thin men are more suitable for narrow models.
13. A tie, matched to the tone of the suit, will allow you to look elegant and at the same time not stand out. To draw attention to yourself, you should wear a brighter tie - burgundy or red.

Correct tie length

A properly fitting tie should have an end in the middle of the belt buckle ± 2 cm. A tie that is too short, as well as too long, will make the image ridiculous, introducing an imbalance in proportion.

How to tie a tie step by step instructions, diagram

The pratt knot is an elegant tie knot that looks good with both casual and weekend suits. It was invented by one of the employees of the American Chamber of Commerce, who tied it for 30 years. Only in 1989, after the publication of several articles, this tie knot became popular in the United States, and then around the world. The pratt knot is tied on short, padded ties and is suitable for shirts with medium-sized collars, as well as collars with rounded ends.
To tie a pratt, you need to put on a tie so that the wide end is on the right and the narrow end is on the left. Further, following the scheme presented below, it is necessary to cross both ends. Then pull the wide end out from under the narrow end, pointing it up, wrap once around the crossing, forming the front side of the knot. Wrap the wide end around the first crossing again, then bring it to the side and stretch it from below, thread it into the loop formed, tighten the knot.

How to tie a thin tie, knot diagram

Thin ties are called ties, the width of which is 3.8-6.5 cm. Such models of ties look great on young, tall and thin men who wear them, combined with fitted suits and single-breasted jackets in casual style, knitted cardigans. Due to their lightness, these ties need to be fixed with a clip, which is attached between the 3rd and 4th buttons of the shirt.
The knots tied on such ties are often a little loose and sloppy. Thinner ties work best with small knots such as quarter and half-windsor knots, which can be combined with both narrow and wide collars, as well as shark collars and button-down collars. Slightly less versatile, but also quite compatible with skinny ties, are the Trinity, Winsor, Christensen and Vann Wake ties.
To tie a thin tie with a half-widzor knot, you must:

• with the right, longer end of the tie, cover the left;
• wrap the left end with the right end and bring it inward to the center of the knot;
• bring the right end to the right and wrap it around the left end at the base of the knot;
• bring in and pull out in the center, thread into the outer loop;
• straighten the edges and tighten the knot.

The diagram below shows in detail the sequence of tying the half-windsor knot.

How to tie a wide tie, step by step diagram

A wide tie looks good on full as well as tall, athletic men. With caution, you should choose this model for owners of short stature and a slender figure. As with regular models, when choosing a wide tie for a jacket, you should focus on the width of the lapels. The difference between them should not be very noticeable.
The knot of a wide tie should be voluminous, so Windsor, Double Windsor, Grandchester, Balthus, Prince Albert knots look good on such models. The Prince Albert knot is an asymmetric knot that is ideal for wide silk ties and shirts with long, wide, medium collars and button-down collars. Being tightly tightened, it has a strict look and therefore is optimally suited to a business suit.

Another knot that looks good on wide ties is called "onassis". It is suitable for those who would like to hide a tie under the shirt collar. A similar knot, as a rule, is tied on heavy textured ties.
Having studied the sequence of tying the onassis knot, it will not be difficult to decorate your suit with an original tie knot.

In the video below, you can see what other knot you can tie on a wide tie.

How to tie a tie in pictures

The pictures below show the process of tying the Windsor knot. Following the prompts, tying it yourself is not difficult.

The appearance of the Windsor knot is associated with the name of the Duke of Vidzor, who preferred wide knots and thick fabric ties. The Windsor knot looks great when paired with a wide-set slant collar.

Beautiful knot for a tie, photo 5 options

The photo below shows several options for beautiful tie knots.

The video below demonstrates how to quickly and easily tie a beautiful knot on your tie yourself.

How beautifully to tie a tie with an Eldridge knot, step by step with a photo

The Eldridge knot is a complex and voluminous knot, larger than the Windsor knot, outwardly resembling a wheat ear. Being invented in 2007 by Jeffrey Eldridge, due to its attractiveness, it quickly became popular. It harmoniously looks with large and medium collars, collars with buttons and collars with soft ends, it will be appropriate to look both with a business suit and an informal ensemble. This knot looks good on smooth and plain ties, and when tied, decorates the suit without requiring the use of additional accessories.
The diagram below shows how to tie a tie with an Eldridge knot.

The process of tying the Eldridge knot is laborious and requires mastering the skill of tying.

1. Throw on the tie so that the wide part is at the level of the belt. The whole knot is tied with a thin part of the tie.
2. Cross the ends of the tie, covering the wide part with a thin part.
3. Wrap it around the widest part and pull it up.
4. Put a tie behind the collar and wrap it, pull it out.
5. Form the front side of the knot, wrapping the thin part of the tie around the wide one and leading it from below into the collar.
6. Having wrapped the knot with the thin end, pull it down and bring it under the knot.
7. Pass the thin end into the loop on the front side, tighten, directing it down.
8. Bring the thin end behind the neck of the tie and pull it down.
9. Pass the thin end through the collar again, but now bring it out from the other side.
10. Pass the thin end into the loop formed on the front side, pull it up.
11. Hide the remaining tip under the collar of the shirt and straighten the knot.

You can take a closer look at the sequence of tying the Eldridge knot by watching this video.

The most beautiful knots for a tie, diagrams with photos 5 options

Appearing in the 30s of the last century, the Balthus knot is still one of the most spectacular tie knots. It goes well with wide collars and collars with soft ends. To tie a beautiful knot, it is recommended to choose long ties made of thin fabric.

• Murrel knot

This non-standard way to tie a tie is an inverted version of the windsor knot. Its peculiarity lies in the fact that the narrow part of the tie lies on top of the wide one. This knot is perfect for informal parties and festive events.

• Trinity knot

The original tie knot - "trinity" is the best option for special occasions. Bulky, slightly larger than a Windsor, this knot looks good with almost any shirt collar. Trinity looks best on silk ties with wide and medium collars, as well as button-down collars.

• Knot Van Wijk

The long, thin Van Wijk knot was created on the basis of another tie knot, the Prince Albert. This knot has a slightly asymmetrical, elongated spiral shape and is versatile enough to be paired with both a business suit and a casual ensemble, . The van wijk tie knot can be made on a narrow, standard or wide tie. and harmoniously looks with shirts that have a wide or medium collar, as well as a button-down collar.

• Fishbone Knot

The elegant "fishbone" is a complex multi-layered tie knot that always looks impressive and stylish. It is tied only on long silk ties and looks great with shirts that have wide collars. This knot is perfect for special occasions.
In the video below, you can see in more detail how complex tie knots are tied.

Modern tie, photo 5 options

The look that a modern tie has, this accessory acquired 150 years ago. High-quality ties are sewn from 3-4 separate parts, and exclusive pieces are made from a single piece of fabric. The denser the material from which the tie is sewn, the less it will wrinkle and last longer. Modern fashion does not limit the choice of color, color or shape of a tie, making it easy to choose a model to your liking.

Video how to tie a tie the easy way

For those who don't have time to learn complex tie knots, here's how to quickly and easily tie a beautiful tie knot.

The ability to tie a tie beautifully and in an original way is an important skill that will allow a man to always look great, whether he is dressed in a business suit or a casual set. Thanks to the variety of tie knots, choosing the right one for a particular ensemble is not difficult.

A neatly tied tie allows you to look stylish and respectable. Therefore, any man should know how to do it right. Our photo selection with step-by-step instructions and videos will help you cope with a seemingly difficult task. Therefore, do not be afraid that something will not work the first time. Experiment!

Some tricks

A properly selected knot allows you not only to show your own individuality, but also to add zest to the image, place accents, and emphasize the features of the cut of the jacket.

Experts identify more than eight dozen different ways to tie a tie, ranging from the simplest to unusual intricate patterns.

Stylish tie options

Node selection is not an easy task. After all, here one should take into account not only personal preferences, but also the complexion, the type of collar of the shirt, the style of the suit, the features of the event, etc.

Before moving on to step-by-step diagrams, we suggest that you familiarize yourself with another important recommendation. The correct length of a knotted tie is the most important parameter to consider when creating the perfect look. The best option - the tip of the tie should touch the top edge of the belt. If the tie ends significantly above or below the belt, it is better to tie the knot. This condition is valid under any dress code conditions and is valid anywhere in the world.

Interesting! The ability to tie a tie is useful not only for men. After all, having mastered the technology of creating original weaves, any girl can easily effectively tie a scarf or scarf around her neck.

Simple knots

In order not to scare those who are taking their first steps towards mastering the technology of tying a tie, we offer some simple step-by-step instructions with photos that will tell you how to quickly create the perfect knot.

"Kent"

This is a simple and at the same time effective knot, which is perfect for men of average build.

Step-by-step diagram of the Kent node

The advantages of this method:

• the ability to use a fairly wide accessory (more than 5 cm) of medium length;
• ease of implementation and only one loop, allowing you to adapt even a short tie to a tall man.

Interesting! According to experts, "Kent" looks great even in combination with a T-shirt equipped with a small collar.

"Quadruple"

This knot was very popular in the middle of the 20th century. Its main advantage is simplicity. Also, among the distinctive features of this method, its versatility can be distinguished, because a simple and concise triangle fits perfectly into both everyday and avant-garde wardrobe, and you can tie it on a tie of any length and width.

"Prince Albert"

This is a slightly more complicated option, because the knot already consists of several loops. In order not to get confused, carefully study the diagram.

Where and when is it better to use Prince Albert? This option is suitable for men of short and medium height, because the revolutions will be taken away from the total length of about 10 cm. It will ideally complement bright unusual shirts with a print or contrasting trim.

Interesting! Do not forget about clips and cufflinks, they will make the image more fashionable and stylish.

"Pratt"

This option is very popular among American politicians, businessmen and celebrities. As a result of fairly simple weaves, it is possible to obtain a laconic semi-rhombus that does not hide the collar, leaving wide scope for experimenting with the image.

Best of all, the Pratt knot is suitable for plain suits and polo shirts in classic colors.

"Half Windsor"

Would you like your tie to be tied just like Vladimir Putin's? Then urgently master half-windsor.

Distinctive features of such a node:

• neat flat triangle;
• elongated asymmetry of the free edge;
• versatility, which allows, following step-by-step instructions and photos, to beautifully tie both wide and narrow ties.

Interesting! "Half Windsor" fits under a strict and casual shirt, allowing you to go to a festive reception or a business meeting.

"Windsor"

The knitting method is named after the Duke of Windsor, who liked this option more than others. The main advantage is a perfectly even triangle, which is very easy to tighten and adjust depending on the desired neck diameter.

However, in order for the "Windsor" to work, the tie must be long enough.

"Cavendish"

A very unusual and original way to tie a tie. The result is a fairly large and voluminous knot. That is why this option is recommended to be combined with shirts with a wide collar.

Ties made of thin and light materials are best suited for creating a "cavendish".

"Oriental"

This method, on the contrary, due to its not very strong fixation, is suitable only for wide ties. The result is an even triangle that goes well with office style, but would be out of place in tandem with a formal tuxedo.

"Victorian"

If you want to stand out from the crowd, then this option is perfect. In the process of creation, the tongue of the tie is wrapped around the initial knot four times, after which it is carefully tucked inward.

The result is an interesting asymmetrical shape that perfectly emphasizes the conciseness of classic suits and casual shirts.

Knots for thin ties

In the people, thin accessories are called "herring". The width of such products does not exceed 5 cm. Despite their unusualness and complexity, such ties fit perfectly into everyday and office looks, emphasizing the elegance of sweatshirts worn over a shirt.

"Cross"

As a result of difficult manipulations, a rather dense and narrow knot is obtained, which is popular mainly among lovers of the avant-garde and youth style.

"Kelvin"

To create such a node, you need to be patient. However, the result is worth it.

"Kelvin" will perfectly complement the winter and demi-season wardrobe, drawing attention to the restraint of the modern dress code.

"Saint Andrew"

According to legend, the martyr Andrei was crucified on an X-shaped cross, from which the name of this knot came. Despite the presentable appearance, tying a tie in this way is not difficult. At the same time, it is easily adjustable in length, which is very convenient for daily wear.

Creative Options

If you don’t want to be like Hollywood celebrities and the president, then it’s time to learn how to tie a tie in an original and non-standard way. The elegant knots below will make it possible to emphasize not only the collar of a business shirt, but also fit perfectly into the youth style and match urban trends.

"Eldridge"

This knot resembles a pigtail and perfectly refreshes even an office bow, emphasizing the image of the owner.

It is best to knit it on long and plain ties, combining with colored shirts with a classic cut.

"Trinity"

If you want to make the image more elegant, you should definitely try this option.

An oblique line dragging across the entire knot will highlight the owner in a corporate photo and will not let you get lost at a secular party.

"Van Wijk"

The creator of this knot is an artist, which is probably why it turned out to be so refined and at the same time practical.

Distinctive features of "Van Wijk" are an elongated wide shape and smooth lines that perfectly complement the business style.

"Balthus"

This knot is rightfully considered the most voluminous and wide, so it will certainly appeal to connoisseurs of eccentric bows. Try to make it from silk products, but be aware that it can take quite a long time to learn.

"Cape"

Unlike the previous version, "Cape" is distinguished by sophistication and ease of creation. With it, you can easily emphasize the luxury of a tuxedo and distinguish the owner from the crowd. But keep in mind that this knot is not suitable for tying a tie with clear geometric patterns.

"Diagonal"

This option is one of the most extraordinary and difficult knots, allowing a man to be in the center of everyone's attention at any party. It is double and is distinguished by the presence of asymmetry. The "diagonal" knot is suitable for shirts that have a wide turn-down part.

It is not enough to learn how to tie a tie correctly, you should also know some key points that allow you to create the perfect combination of a tie with strict things. Here are some basic combination rules:

• If the tie has a pattern, then it is best to choose a minimalist shirt.
• On the contrary, a plain tie will perfectly complement the combined shirt.

If we are talking about a child, then it does not hurt to use the idea of ​​\u200b\u200bcreating a children's tie with an elastic band. This is an ideal option for every day, which allows you to not only look neat, but also save time on tying.

Tie an ordinary tie with an elastic band

We hope that our article with step-by-step photos allowed you not only to choose a stylish and beautiful knot, but also to figure out how to quickly tie a tie.

Solid color trouser suit is the most stylish acquisition of recent seasons. The free cut skillfully hides extra centimeters, and the color vertical lengthens the silhouette. Modern business women have declared such a set to be the No. 1 thing in a business wardrobe and wear it even with sneakers.