home › Inspiration › Crochet winter hat for women with a beautiful pattern. Crocheted hats, berets, scarves

Crochet winter hat for women with a beautiful pattern. Crocheted hats, berets, scarves

Hello, today's topic is this is KNITTING HAT… I will show you the most beautiful models of women's hats for the winter of 2016-2017 and tell you exactly how they are connected ... In this article I will reveal to you the general principle of knitting women's hats and berets(both crochet and knitting). You can already about one photo to understand exactly how this hat is connected... and LEARN without diagrams and descriptions to figure out for yourself what and in what sequence you need to do in order to eventually knit just such a winter hat as in the photo.

Today we will knit...

hats-caps on knitting needles (elongated and on the head)
beret hats on knitting needles and crochet (fluffy and not so)
women's turban hats (I will show one simple way on knitting needles)
knitted hats with fields and visors (I will tell you in detail how to make fields)
winter hats with elegant soft lapels
and dried wool caps designed like an English lady.

So, let's start knitting our autumn and winter hats.

Let's start with the simplest ones... and move on as the task becomes more complex.

Women's hats SIMPLE KNIT spokes ...

(cut CAP)

The fastest knitting hat is when you just chose one simple pattern(gum, English gum, knit-rice) ... And drive almost the entire (or even all) part of the canvas in one pattern. Starting from the crown - in each row we begin to decrease the loops, and when 15-20 loops remain on the knitting needles - we pull the thread through them - and simply pull them into one bunch-point at the back of the head. According to this principle, the cap is knitted in the photo below - (25 rows of knitting of the "rice" pattern ... and 15 rows of purl loops with decrease).

And in the same knitting with the “rice” pattern, it would be nice to knit a cozy scarf-snood (collar).

In such a RUNNING PATTERN (of the same type) can be connected as dense winter hat (covered over the head) ... So loose spacious knitted hat pattern. You can decorate a women's hat with one or two fur pompoms.

Can be knitted HAT-CAP - as in the photo below . She looks best when it has a fairly wide (16-20 rows) gum. With a narrow elastic band, such a hat is not suitable for anyone ... as it visually cuts off the skull. A wide elastic band, on the contrary, visually stretches the oval of the face ... opens the forehead and gives volume.

To knit any hat pattern exact knitting pattern in principle, it is not needed ... Since all the hats in the world are knitted according to the general principle. Below I give a general knitting pattern for hats-caps... And a little lower I will give a knitting pattern for all berets.

GENERAL KNITTING SCHEME

for any caps.

Such hats-caps can be knitted according to a simple WITHOUT A PATTERN ... or according to a RELIEF or OPENWORK pattern. Choose any knitting pattern on any site ... and go.

Step 1 - START KNITTING

First and we knit an elastic band (in 12-15 rows) and further ( without adding loops on the knitting needles) we knit an already patterned fabric of a hat. We get a model similar to the photo of the purple hat is above.

Or after knitting the elastic we can add stitches on the needles... and our canvas will begin to expand ... and we will get a model of a cap that is lush in volume (as on the pink model from the photo above ).

An important rule for adding loops.

When adding loops when knitting a hat with a pattern only one thing matters - the total number of loops on the knitting needles should be DIVIDED BY THE REPORT of the pattern (by the number of loops that are repeated in the pattern pattern) ...

For example, the report (repetition) of our pattern is 8 loops ... which means that the total number of loops on the knitting needles should be divided by 8 ... For example, it should be 160 ... or 168 ... or 176 loops ... (edge-edge loops do not count).

Step 2 - BASIC KNIT.

Further, when the loops are added we begin to knit a pattern ... repeating reports ...
We drive the patterned canvas on rows 40, if you want the usual size of the cap ... (it also depends on the thickness of the threads) Trying on the head ... in the process of knitting, you yourself will understand when it’s enough to drive in a straight line and it’s time to narrow the fabric at the crown. (You can run such a patterned canvas longer so that the hat is higher ... or finish earlier so that the hat wraps around the head, and does not stick out or hang down - everything is up to you)

Step 3 - COMPLETING THE HAT .

Then when our hat approaches the back of the head(or whatever length you want)… we start to close the loops 4 each (or 6 ... or 8 each) in each row - the more you cast off the loops in the row, the faster your knitting will end. Since knitting is completed when 16-20 loops remain on the knitting needles

An important rule of DECREASE loops.

We know that there are fewer stitches on the needles if knit two loops together (as one) ... But in order for the decrease in loops to be UNIFORM - you need to do this decrease in any place ... and in certain sectors of the cap ... (so that these decreasing places are at the same distance from each other). That is, we divide the entire circumference of the cap into sectors (as we divide a round cake into equal pieces with a knife) ... usually an even number of sectors can be 6 ... or 8 or 10 ...

If you have a hat with a pattern(in which some drawing-report is repeated) - then the drawing itself can be a sector ... Then we make the decrease in a certain (at your choice) place of the pattern- and so in each repetition of the pattern we knit two loops together as one.

Here's what it looks like in the process sector decrease loops when knitting any hat or beret ... (it doesn’t matter if you knit it on two knitting needles or on circular ones).

For example- we have 160 loops on the knitting needles - and we have reached the top of our hat and we need to decrease. We decide to decrease evenly in 10 places of each row ... So we need to divide our hat into 10 sectors.

Then we divide 160 by 10, we get the number 16 ... (that is, we mentally divide the hat into sectors - 16 loops in each sector). And so we continue...

In our first decreasing row we will knit at the end of each 16th loop two loops together(that is, we pick up each 15th and 16th together and knit as one) ...

In the second decreasing row there is one less loop in the sector (and we will already pick up together every 14th + 15th loop in a row) ....

In the third decreasing row- in each sector there are even fewer loops (and we will knit together every 13th and 14th loop).

Everything - now you can complete the knitting.

We collect these remaining loops on a thread... we tighten the thread by collecting all the loops into a bundle and tie it into a knot (we hide the ends of the knot inside). We close the back seam of our hat... and you're done.

LOWERED hat in coarse knit…

If you knit a hat-cap on thick knitting needles and thick threads ... then it’s better to make it SMALL - ON THE HEAD ... and wear it slightly tilted back (that is, without pushing it over your forehead).

The knitting principle is small low hat- exactly the same as that of a high cap-cap ... It’s just that here the FRONT PART of the knitted fabric will not be so long ... that is, we’ll move on to the TOP PART with its loop-reducing rows early.

Knitted hats - WITH EARS.

HAT WITH EARS №1 (dark gray in the photo below) You can KNIT the ears separately and then sew them to the right place of the finished knitted hat.

HAT WITH EARS №2 (light gray in the photo above) - we knit a hat in the form of a pipe - without reducing the loops at the crown, and then just close the loops and sew the front and back of the hat together in a straight line. T about there, the top of the pipe was flattened (and this flattened edge was sewn together)

And then the corners of this straight seam we turn into ears. To do this, we make a seam with threads DIAGONALLY cutting off this corner. We make a seam with a thread, pierce through both layers (front and back) and not with a needle, but with an ordinary crochet hook we thread the thread back and forth. Thus, our corner will not be pulled over the head like the whole hat, but stick out like a separate ear. And from the other corner of our flattened and sewn cap pipe, we make out the same eye, in the same way.

Or such ears can be conceived on a knitted hat with braids - with a lush embossed pattern. It is easy to knit with your own hands.

Knitted HATS with knitting needles - WITH BRAIDS.

LARGE RELIEF KNIT "BRAID" looks very nice on women's hats

And braids can be placed vertically(as on the ash-pink hat from the photo below).

Or you can make a longitudinal knitting of a hat - not from the forehead to the top of the head, but along the side line (along the girth of the head) - and then our braids will be horizontal left to right - like on the gray hat from the photo below.

KNITTED HATS -

With lapels and FIELDS.

Fashionable hats with fields- reminiscent of elegant hats - so feminine, ideal for an elegant coat with flirty gloves ... Under loose curly hair

Sometimes the fields are knitted SEPARATELY and then sewn to the edge of the finished hat ...

Sometimes, in order to give such fields the necessary rigidity, special blanks of felt fields are cut out ... and inserted inside the fields folded in half (like a bookmark in a book). This is exactly what is done on the knitted hat from the photo below.

Here, try to make the same (as in the photo above) fields on your hat - it's easy to do it yourself ...

Step 1 (preparatory)

First you knit a hat ... Then you cut it out of felt a figure resembling a bagel (a pancake with a hole)... the inner edge of the donut hole should be the same size as the circumference of your head and the edge of the hat.

Step 2 (knitting )

Then on the needles we will knit DIRECT (rectangular fabric gum pattern).

To do this, we collect such a number of loops ... so that the future canvas is equal to the length of the OUTER circumference of a donut made of felt (you can measure it with a centimeter or a school formula) ...

The length of the canvas should be twice as wide as the thickness of the donut - to wrap the donut around it from below and above (since the knitted fields at the cap go both above and below) ... That is, we knit the fabric and from time to time try it on to the width of the cut donut - we wrap the barrel of the donut from the lower and upper sides and see how many more rows are missing ... we knit to the desired length.

Step 3 (stitching )
When the canvas is connected (that is, it has reached a sufficient width for wrapping and sewing a “donut-blank” into it), we are on our canvas close the loops ... remove it from the knitting needle.

We wrap our felt bagel with a knitted cloth ... so so that the fold of the canvas is along the OUTER edge donut ... and the connecting seam of the doubled fabric went along the inner edge of the donut fields was ... (that is, we immediately wrapped and sew the halves of our canvas along the inner edge of the donut)

And then along the edge of the same seam we sew our finished fields to the finished hat. And that's all. You can now crochet a beautiful fluffy flower and add it to the side of your hat.

Another way to make fields on a knitted hat.

And in the fashionable model of a light beige hat (from the photo below) - the fields are formed by themselves when bent in half knitted classic elastic band (one front, one purl). it's easy to do it by hand.

That is, we knit an elastic band for a hat twice as long what the margins should be... and then fold it in half. We stretch the bend slightly with our hands in breadth so that it protrudes with a visor.

Sometimes a fishing line is inserted into such a protruding bend of the elastic- this is done so that the edges of the fields do not wrinkle from wear, but always remain even and elastic.

Sometimes a corset tape is inserted inside the bend - for rigidity(the tape with which the trousers are hemmed below) - and with sewing threads (tone on tone) it is neatly and imperceptibly sewn with through stitches through the edge of the fields.

And here is a hat with WIDE lapels-brims .

Here, the lapel is knitted in the shape of a bell ... which has two sides (inner - light, and outer dark). Now we will make it with our own hands.

Such a hat must be knitted starting from the back of the head... that is, from top to bottom (since it will be convenient to adjust the scope of the fields ... and in which case, it will be convenient to dissolve them and knit again ....

A simple knitting pattern for this WIDE TWO-COLOR BRIM HAT…

Knitting this black hat with white fields - we start from the top ... just knit a straight fabric (or a straight pipe, if on circular knitting needles) ... The fabric of this pipe should be so long that it covers the head from the crown to the forehead.
We turn to white threads - and sharply expanding canvas from the edge of the forehead (adding loops in each row). A shape similar to a bell is formed (we reach the very edge of the fields - trying on in front of a mirror to decide whether such a width of the fields was enough for us). It was we who tied the white side of the fields (the one that is visible in the photo).
We change the threads to black ones and knit the Narrowing in the opposite direction (reducing the same number of loops in each row as we added before). ... this will be the reverse side of the lapel of the fields (dark) which is not visible, hidden-turned away in the photo.
It turns out a design in the form of ... first a narrow black pipe .... then an expanding white part... and then a narrowing black part.
At the widest point of the canvas(where the white turns into black again) we bend the canvas in half (we folded the fields of the cap in half ... And we sew this addition-we fasten it with threads - we fix this double sandwich of fields.
And then only remains sew the top crown seam of the cap - fold it with an envelope as seen in the photo and secure with threads ... and (if we did not knit on circular knitting needles) we make the back seam of the cap.

Note - if you knit such a hat from thick dense threads, then the fields can not be made DOUBLE - without this they will turn out to be dense and upright .

(If suddenly it was unclear explained - write in the comments, I will explain in more detail and even draw ... and maybe even calculate the number of rows and loops in a row).

Knitted hat with brim - crochet.

And here is a MULTI-COLORED hat, which is crocheted. Crochet fields are generally easy to knit. There is no need to be smart here - know, drive the columns in a circle, sharply adding their number in the fields.

And then, at the very edge of the fields (on the last rows), you need to slightly reduce the number of columns so that the cap itself asks for a neat bend upwards.

KNITTED HATS -

WITH SOFT VALVES.

The fields of a knitted hat can be soft and easy to turn away to the hat... then we have an elegant lapel on a knitted cap.

Here in the photo below we see an example of how a ONE-SIDE SIDE lapel is made.
How exactly it is made, I think everyone understands.

knitting first top of the cap... And then we knit the lapel part itself as a separate long canvas on knitting needles (similar to a scarf). There is only one pattern - both from the front and from the wrong side we knit all the time one face loop... we get a ribbed pattern (it is thanks to this ribbed pattern that our fields keep their shape well).

Buttonholes are not required- just sew the edges of the canvas overlapping each other ... and sew on buttons for decoration.

Here is the front opening . The hat is knitted on two needles (without elastic) so that the fabric itself is wrapped up with a beautiful roll up. The pattern looks like RICE...

But the lapel, which is uniform around the entire circumference of the cap. It is decorated with a neat flower.

Hat with cuffs - soft angora.

And here is another fashionable hat - in it we see a non-standard circular knit - and the direction of the knitted fabric goes across - this made it possible to come up with such beautiful lapel fields.

Here the knitting direction is HORIZONTAL (and apparently in the shape of a trapezoid)... which is then sewn into a hat (if suddenly something extra is connected) you can always correct it with scissors (roughly) and close the cut with threads.

To be sure, we can first do Trial mock-up of a hat from a piece of an old sheet(to guess its shape) ... then knit the canvas according to the shape of the layout ... and fold such a hat.

And even better... tie such a hat ONE SIZE BIGGER ... and therefore DECREASE-DOWN it (like a felt boot) in hot water (40 degrees) in a washing machine ... The knitting will immediately become very dense - the hat will become denser and one size smaller.

MORE ABOUT THE RULES OF FELTING I will tell you right now using the example of the following two hats.

HATS KNITTED WITH lapels - dried.

See what fashionable dried hats you can knit on knitting needles ... and dump in the washing machine.

They knit first larger than necessary. Then they are washed in hot water and the wool shrinks. decreases by 30% and the hat becomes plump and warm, as if made of soft felt fabric.

I’ll say in advance that both gray and pink hats are knitted according to the same instructions - this is the same model, it’s just that the manual drapery of the fields (with the help of hat pins) is slightly different.

A detailed description of the dumped hats from the photo above.

(gray and red hat).

Characteristics of the material and product.

200 g of yarn Wash+Filz-it! Fine

(100% wool, 50 g\100 meters No. 00120

circular needles No. 5, stocking needles No. 5
Buckle + pin, brooch, buttons (for finishing hat fields).

Product size before felting: head circumference 70 cm, height 26.5 cm.

Product size after felting: head circumference 54, height 20 cm.

Before starting work- you should knit a sample from the purchased yarn - mark a 10 by 10 cm square on it with a bright thread. Then dump this sample in the washing machine and check how it decreases.

According to the declared yarn- the density of knitting before and after felting should match the following:

Knitting density before felting: 10 x 10 cm = 16 sts and 22 rows

Knitting density after felting: 10 x 10 cm = 20 stitches 29 rows

And if your data is different (and this may be due to a different yarn, too tight knitting, or vice versa, your habit of knitting loosely and sweepingly), then you need to dial the number of loops on the knitting needles a little different. In accordance with how your prototype differs from the one shown above.

In order not to peer into the small print and encrypted abbreviations, I decided to paint step by step and in rows the whole knitting process and hat assembly.

STEP 1 - knit the main part of the brim of the hat.

We start knitting from the fields - that is, we collect 124 loops on circular knitting needles and knit circular rows with the front stitch. 20 rows in a circle. And we get the straight part of the fields (gray shading on the pattern of the fields). And we will only have to connect that part of the fields, which will be an elongated triangular shape in the pattern from the diagram below.

STEP 2 - start changing the shape of the fields

(narrow on one side and wide on the other side).

At a height of 9 cm (= after 20 circular rows) we knit short rows- every other row we will decrease by 10 loops. This is necessary so that our fields turn out to be different in level - on the one hand, our field will turn out to be wider (there will be more rows), and on the other hand, our hat field will be narrow (in the place where we reduced every second row by 10 loops). Now you will learn how it is done, and understand how it will look.

I decided write each row, which you knit - so that you can knit without bothering your brain by strictly repeating the steps described below.

So, at a height of 9 cm (after 20 circular rows), we knit short rows as follows.

We have 124 loops on the knitting needles. We start knitting 21st circular row but we knit this row not to the end, but to the last 10 loops of the row(that is, we do not knit all 124 loops that are on the knitting needles, but only 114 facial loops) , after which we stop and we need to turn the work back to front (so that the wrong side of the knitting is already looking at us) and we can knit in the opposite direction of the circle.

And in this back way we do 1 yarn over on the right needle and knit the 22nd row – the same reduced by the number of 114 loops, but already on the wrong side. We knit this amount to the end and turn our knitting back to the front side to knit the next 23rd row. Here's what it looks like in a picture (I hope I made it clear).

On this front side and knit 23rd front row- but we also do not knit all 114 loops - but again we turn the knitting without reaching 10 loops to the end. That is, in the 23rd row we must knit 104 front loops. And turn to the wrong side - to knit on it 24th row - 104 purl loops (before each purl row, do not forget to make 1 yarn over on the right knitting needle). And we turn back to the front side.

25th row we also do not knit 10 loops to the end - but stop at knitted 94 front loops- and turn to the wrong side. Where do we knit 26 row - purl 94 loops. And we turn back to the front.

This 27th row we also do not knit up to 10 purl loops - that is, we only knit 84 front loops. Turn knitting inside out and knit 28th purl row - 84 loops. And again we turn to the front side.

This 29th row we also reduce by 10 loops - that is, we only knit 74 front loops, and turn the knitting on the reverse wrong side, and knit 30 row - 74 purl loops. We return to the front.

This 31 row- we again reduce by 10 loops - that is, we only knit 64 front loops. Turn inside out - knit 32 row - 64 purl loops. We return to the front side.

This 33 row 54 front loops 34th row - 54 wrong loops. Expand to the front.

This 35 row- we again reduce the knitting by 10 loops - we knit only 44 front loops. Turn inside out and knit 36th row - 44 wrong loops. We return to the front side.

This 37 row- we again reduce the knitting by 10 loops - we knit only 34 front loops. Turn inside out and knit 38th row - 34 wrong loops. We turn to the front side.

This 39 row- we reduce the knitting by 10 loops for the last time - we knit only 24 front loops. Turn inside out and knit 40th row - 24 purl loops. And after that, we turn the knitting with the front side towards us for the last time. This was the last short row. We are back on the front side.

And now we can continue our usual circular knitting- together with all 124 stitches in a row.

STEP 3 - knit the main dome of the cap.

So, we have 124 loops on the knitting needles, already connected fields hang from the knitting needles (on one side of the circle, the fields are wider 40 rows high, on the other hand, narrower 21 rows high.). Now we will knit the hat itself - the part that is pulled over the head.

The first thing we need to do is seal the transition from the brim to the dome of the hat. To do this, we knit each loop in together with a crochet.

Here is one way to close the loops - with a hook.

So, we closed 12 loops - and therefore we have 112 loops left on the knitting needles. Of these, we will knit the dome of the cap.

We transfer these loops from circular knitting needles for 4 stocking needles- 28 loops on each of the four knitting needles. And we knit in a circle 30 facial rows up. (Our knit rises another 13.5 cm (excluding margins).

Now we stopped and marked every 14th loop on our knitting (you can pass red ribbons between every 14th loop). We will need these marks (there will be 8 of them) in order to properly reduce the cap (narrow the dome).

We noted and in the next circular row we knit each 14th loop together with the previous one (that is, we knit 13 and 14 together). As a result, we have 104 loops left on the knitting needles.

Next, we knit like this.
In every 4 rows - repeat the decrease(we knit the loop marked with a ribbon together with the previous loop). Doing so 3 times. (That is, 3 rows are simple, 4 we decrease - 3 rows are simple, 4 we decrease and 3 more rows are simply 4 we decrease - three such calls). As a result, we have left 80 stitches on needles.

Now let's get stronger.

In each 2 rows we make the same decrease (in the same places marked with a red ribbon). We repeat 6 times. That is, 12 rows we alternate one simple + one subtractive. As a result, we have 32 loops left on the needles.

And now we come to the end of knitting.

Three rows in a row we make a decrease - in each row. In the same places marked with a ribbon. And on the spokes we have 8 loops left.

We finish knitting: cut the thread, stretch the tail of the thread through these last 8 loops. and pull tight. We fix the end of the thread in the body of the cap (using a crochet hook).

STEP 4 - we roll the hat

in the washing machine

+ form its final form.

And here is a detailed description of how such hats knitted from wool can be DOWN IN THE WASHING MACHINE ...

We place a hat in a laundry bag.
Fall asleep in the washing machine colored laundry detergent. DO NOT add fabric softener or detergent for woollens.
Choose mode - delicate wash(it is with a large flow of water - we need this). Mode for washing wool is NOT NECESSARY.
Setting the temperature 40 degrees.
Best with a hat in the car shove something rough(like jees or towels) - to create additional friction.
We start washing - as a result of which the product will decrease by 1/3 (i.e. 30%) After that, we take it out - wring it out and wet it PULL-STRETCH to the size of your head ... (so that she remembers this shape) ...
and then we put it on a BLUE where it will dry. It is, of course, understandable that you do not have hat blanks in your household - n oh you can find a replacement for her- for example, a suitable-sized children's ball or a three-liter jar (to increase the size of the jar, you can wrap it with several layers of newspaper, fix it with tape and put on a bag for cleanliness) - put on a hat and leave it like that until completely dry.
After you have pulled the hat onto the blank, you must level its fields - stretch the fields so that on one side they are 9 cm, and on the other 15 cm.
AND UNTIL THE HAT IS DRY, we do its styling. .

Here is a photo to help you. We approach the mirror and try to lay the fields as shown in the photo. The instructions say this:

Gray hat styling: Align the margins (by 9 cm and by 15 cm). Turn the fields up (both the short and long sides. Take the edge of the short field turned up and turn its half down. Stab this place with a hat pin (buckle + wand).

1. FASHIONABLE KNITTED HATS AND BERETICS FOR WOMEN THIS SEASON

Autumn painted everything around with bright juicy colors, it gets colder every day and even the first frosts are planned at night. It's time to think about updating your wardrobe not only with warm knitted sweaters and shirt-fronts, skirts and scarves, but also with stylish bright (and most importantly - warming from the cold) hats that will protect women's health from the constantly pursuing colds that are characteristic of the autumn-winter season .

And what could be more convenient and comfortable than hats or berets, knitted with your own hands from high-quality yarn according to the schemes of modern models?...

Choosing yarn for crochet:

This season, monochromatic models made of bright yarn will be relevant, under which you can hide your hair. The beret can be decorated with a flower (kanzashi) knitted or folded from satin ribbons.

◘ Headdress in the form of a crochet wide bandage.

Now this option will be as popular as last season. A wide knitted headband is more suitable for girls with long hair. Monochromatic models with a large accessory on the side (or a knitted flower) look elegant. For a sporty style of clothing, you can knit a wide bandage with a Norwegian pattern.

2. USEFUL TIPS FOR BEGINNERS AND SOME SIMPLE OPTIONS FOR KNITTING WOMEN'S HOTS WITH A HOOK

Useful tips for beginner knitters.

Start crocheting a hat from the bottom. First make two air loops. In the first inverted air. we knit a loop of 6 columns without a crochet. If you start knitting the hat fabric like this, you will be able to avoid the appearance of a hole. In the next round of the circle, you can double the number of loops = 12. Then knit in a spiral with single crochets and add 6 columns in each circular row.

How to quickly knit a light summer hat:

How to crochet an Irish lace beret:

3. SCHEMES AND DESCRIPTION OF THE STAGES OF KNITTING DIFFERENT MODELS OF HEADWEAR FOR WOMEN

Option number 1:

Option #2:

Option number 3:

WE KNIT A GORGEOUS SUMMER TAKE HOOK ACCORDING TO THE SCHEME WITH A DESCRIPTION OF THE STAGES OF WORK. EXCELLENT LIGHT MODEL FOR WOMEN.

Option number 4:

Option number 5:

Option number 6:

Option number 7:

Option number 8:

Stylish crocheted women's hat is a fashionable and practical accessory for any season. Properly matched to clothes, it will decorate the image of both a young girl and a mature woman. Today's master class offers several completely different models and detailed descriptions for them, so even craftswomen with little experience will be able to do this task.

Positive women's hat with pompom-spirals

We will need:

pink yarn of medium thickness, (100 grams per 200 meters) 1 skein;
cr. No. 5.5 and No. 6;
needle.

Knitting density: 11 p. without n. = 10 cm.

The first chain of lifting in a row counts as 1 column. Each row is connected with ss, unless otherwise indicated in the description. The fabric of the hat for women is knitted in single crochets behind the back wall of the loop of the previous row, so we get the effect of an elastic band.

Description

1 p .: you need to crochet No. 6 a chain of 39 in. p., 2 p. without n. in the second p. from kr. and in each of the next 17 sts for the formation of a curl, 1 s. without n. in the next 20 p., turn.

2 p.: 1 c. p. p. 14 p. without n. behind the back wall (hereinafter - zs), we do not knit the remaining 15 p.

3 p.: 1 c. p.p., p. without n. to the end of the river, turn.

4 p.: 1 c. p.p., p. without n. in about all p., 1 s. without n. in untied p. 1st p., 19th century. n. for a spiral, turn.

5 p.: 2 s. without n. in the 2nd p. from kr. and in each of the next 17 (spiral), again with. without n. for zs in all p., turn.

We repeat 2-5 rr. 19 times. At the end of the last river cut the thread, leaving a long tail.

Assembly

With the help of this thread, we sew the initial and last row, make a knot and hide the tip.
Next, you need to collect a hat for women at the crown in a tight bun, wrap the thread around it several times, fasten and cut off.

Edge processing

1 p .: we knit from the edge with. without n. crochet No. 5.5, ending with. without n. in the connecting seam, conn. P..

2-3 rr.: 1 c. p.p., p. without n. in all p., comp. P..

4 p.: 1 c. p.p., in the direction from left to right, we proceed to tying a hat for women with a “crustacean step”, conn. p .. Cut and fasten the yarn.

Hat with a pattern “Volume braids”: video master class

Knitted demi-season openwork hat Patons for women

We will need:

yarn Patons Metallic (63% nylon, 28% acrylic, 9% wool, 85 grams per 230 meters);
cr. No. 4 and No. 5.

Knitting density: 13 p. without n. x 15 p. = 10 x 10 cm.

Scheme

Description

We crochet No. 4 13 c. P..

1 p. (LS): 1 s. without n. in the second 2nd p. from cr., 1 s. without n., turn.

2 p.: 1 c. p., 1 s. without n. zs, turn.

We repeat the second row until the workpiece reaches a height of 56 cm. We do not cut the yarn, we knit ss. the last row with a stacked edge, connecting the rubber band of the hat for women into a ring.

Now we continue crocheting No. 5. We knit along the rubber band with a pattern according to the scheme proposed above, we work in a circle.

Having reached a height of 20.5 cm, we finish the 5th p. pattern and proceed to the reductions for the crown.

New row: ss. in the 1st arch of 1 p., 1 c. p., 1 p. without n. in the same arch, * 2 s. without n. in the next arch of 2 p .. 1 s. without n. in the next s., 2 s. without n. in the next arch of 2 p., 1 s. without n. in the next arch from 1 p. *, repeat from * to *, ss. = 60 s..

Decrease for the crown

1 p.: 1 c. p., * 1 s. without n. in sl. 8 s., 2 s. without n. vm. *, repeat from * to *, ss. = 54 p..

2 p. and all even pp.: 1 c. p., 1 p. without n. in every s., ss..

3 p.: 1 c. p., * 1 s. without n. in sl. 7 s., 2 s. without n. vm. *, from * to *, ss. = 48 p..

5 p.: 1 c. p., * 1 s. without n. in sl. 6 s., 2 s. without n. vm. *, from * to *, ss. = 42 p..

7 p.: 1 c. p., * 1 s. without n. in sl. 5 s., 2 s. without n. vm. *, from * to *, ss. = 36 p..

9 p.: 1 c. p., * 1 s. without n. in sl. 4 s., 2 s. without n. vm. *, from * to *, ss. = 30 p..

Hat pattern "Chess": video mk

Bright knitted hat with fur pompom

We will need:

yarn (100% natural wool, 68 meters per 50 grams) 4 skeins of light green and milk;
white fluffy pompom made of artificial or natural fur with a diameter of about 15 cm (we use
artificial pompom, 100% polyacrylic);
cr. No. 4.5 and No. 6.

Patterns:

The main one (the number of p. is a multiple of 6 + 1): we knit, adhering to the scheme proposed below. We start with a paragraph before the rapport, constantly repeat the rapport, we finish the paragraph after the rapport. We perform 1-18 rr. x 1, then constantly repeat 7-18 rr, paying attention to the alternation of light green and milky thread colors.
The fantasy pattern is knitted in circular rows. each of which begins according to the scheme from the initial c. p. instead of the 1st p. and ends with 1 ss ..
1-3 pp.: with milk thread you need to tie 2 in. p.p., semi-columns to the end of the row.
4 p .: with light green thread you need to tie 2 in. p.p., * 1 semi-column, 1 s. from n. from the lower river (= 1 s. with n., we introduce cr. in front around the p. of the lower river), 1 semi-column, 1 s. from 2 n. from the previous river (= 1 s. with 2 n., we introduce cr. in front around the p. 2 p. below), 1 half-column, 1 s. from 3 n. from the lower river (= 1 s. with 3 n., introducing cr. in front around the p. 3 p. below), 1 half-column, 1 s. from 4 n. from the lower river (= 1 s. from 4 n., introducing cr. in front around the p. 4 p. below) *, from * to *.
5 p .: with a light green thread we make one additional c. p., s. without n .. Then we perform 1 circles. R. semi-columns and with. without n. milk thread and 1 circle. R. semi-columns and with. without n. lettuce thread. We constantly repeat from * to *, while inside the circles. R. half-st., arbitrarily distributing, we perform with. s n, s. from 2 n. and s. from 3 n. from the lower river respectively.

The density of knitting with the main pattern is 11.5 p. x 8 p. = 10 x 10 cm.

Scheme

Description

With a milky thread and crochet No. 4.5, we collect a chain of 60 in. p., we close it in a ring with the help of ss.

For planochki you need to tie 6 circles. R. With. without n .. each of which starts from the 1st c. p.p. and finish 1 ss. in the 1st s. without n. circles. R..

To shape the product, in the 17th circle. R. from planochki we knit every 5 and 6 p. together = 50 p..

We continue to decrease in the 21st p.: every 3 and 4 p. must be tied together = 30 p.

At 23 p. knit together every 2 and 3 p = 20 p.

After 25 laps. R. cut the thread from the plank, leaving a tail 30 cm long, with which we combine and tighten the remaining stitches. It remains only to tie a fur pompom and the women's knitted hat is ready!

Hat pattern "Crocodile skin": video instruction

Elegant women's hat in the style of the 20s

We will need:

yarn (52% merino, 48% Egyptian cotton, 120 meters per 50 grams) 3 skeins;
cr. No. 4.

Embossed with. s n: s. from n. issue in front or behind in with. from n. prev. p.. Each laps. R. we start from the 2nd century. n.p. instead of the first embossed s. with n and finish 1 ss. in the 2nd c. p.p. For doubling the RSSN (embossed double crochet), in s. from n. prev. R. do 2 RSSN.

Women's hat is designed for a head circumference of 56-58 cm.

The density of knitting embossed with. from n.: 20 p. x 6 p. = 10 x 4 cm.

Description

First you need to tie a chain of 3 c. p., ss..

1 p.: 12 s. with n..

Row 2: *double 1 dc in front, 1 dc behind*, from * to * more x 5 = 18 sts.

Row 3: *2 dc in front, double 1 dc behind*, from * to * more x 5 = 24 sts.

4 rows: *1 PCSN in front, 1 PCCH double in front, 2 PCCH in the back*, from * to * more x 5 = 30 p.

5 rows: *3 PC CH in front, 1 PC CH behind, 1 PC CH double behind *, from * to * another x 5 = 36 p.

6 rows: * 2 RS CH in front, 1 RS CH double in front, 2 RS CH in the back, 1 RS CH double in the back *, from * to * more x 5 = 48 p ..

7 p.: * 3 PC CH in front, 1 PC CH double in front, 3 R CCH in back, 1 R CCH double in back *, from * to * more x 5 = 60 p ..

8 p.: P CCH sz., while doubling. every 6 p. = 70 p.

9 p.: P CCH sz., while doubling. every 7 p. = 80 p.

10 p.: P CCH sz., while doubling. every 8 p. = 90 p.

11 p.: P CCH sz., while doubling. every 9 p. = 100 p.

12 p.: P CCH sz., while doubling. every 10 p. = 110 p.

13 p.: P CCH sz., while doubling. every 11 p. = 120 p.

14-16 rr.: * 7 R SSN in front, 13 embossed st. s / n behind, repeat from * 5 times;

17 p.: * 7 R S S N front., 2 x (3 R S S N sz., in the next 2 p. 1 R S S N sz.), 3 R S S N sz. *, from * up to * x 5 \u003d 108 p ..

18 p.: * 7 R S S N front., 11 R S S N sz. *, from * to * x 5.

19 p.: * 7 R S S N front., 2 R S S N sz., in the next. 2 p. 1 R S S N sz., 3 R S SN sz., in the next. 2 p. 1 R C SN sz., 2 R C SN sz. *, from * to * x 5 \u003d 96 p ..

20-25 pp.: 96 R S CH sz ..

26-31 rr.: * 7 R S SN sp., 9 R S SN sp. *, from * to * x 5.

32-37 pp.: 96 R S SN sz .; for the cut, continue further with straight and reverse pp ..

38 p. (IS): 96 R S CH sp..

39 p.: 96 R S CH sz ..

40 rubles: 96 R S CH sp..

41 p .: “crawl step” (p. without n. from left to right), we finish the work.

Flowers

The first flower: a chain of 3 c. p., ss., * 5 in. n., in the 2nd century. n. from cr. completed 1 s. without n., 1 semi-st., 1 s. from n. and 1 s. from 2 n., 1 ss. in the ring *, from * to * more x 4.

Second flower: a chain of 9 c. p. ss., * 8 c. n., in the 2nd century. n. from cr. completed 1 s. without n., 1 semi-st., 1 s. from n. and 4 s. from 2 n., ss. *, from * to * more x 4.

The third flower: a chain from the 12th c. p. ss., * 11 in. n., in the 2nd century. n. from cr. completed 1 s. without n., 1 semi-st., 1 s. from n. and 7 s. from 2 n., ss. *, from * to * more x 4.

We fold the flowers one into the other and sew to the edge of the cut. To tie the spiral part, reattach the thread to the edge of the cut, then the chain from 21 in. n., then in each c. p. issue. 2 s. without n., further ss. at the edge of the cut.

We make the second spiral according to the same principle, only at 37 in. p.. Knitted women's hat is ready!

Selection of schemes

Volumetric hats are not only a suitable headdress for the winter, but also a real trend of this year. They are presented in a wide range, differ in style, design, pattern. Without a doubt, such hats look spectacular, and wearing them is a real pleasure.

We offer to crochet a voluminous hat with your own hands. The advantage of such a hat is that even those who are just trying their hand at needlework can knit it. And the work won't take long.

What you need to work

The headdress is knitted with a pattern of lush columns. In the process of work, they lie in different directions, forming a thick "braid".

Knitting in this technique does not require additional decorations. Only yarn and hook. A knitted snood or scarf can complement the accessory.

What yarn to choose

Best to use yarn with mohair in the following combination:

mohair - 40%;
acrylic - 60%.

For one product, 100 g is enough (one ball). Knitting in two threads.

A product made from such yarn turns out to be very warm, fluffy and keeps its shape perfectly. The color is chosen according to personal preference.

Important! It is useful for beginners to know that when working with a dark thread, it is more difficult to count the loops and see the pattern. Therefore, the first time it is more convenient to work with light yarn.

What kind of hook is needed for knitting

The size of the hook depends on the chosen yarn. Perfect for our bifold yarn hook size 3.5 mm.

Reference. It is best to choose a tool with an aluminum tip and a plastic handle. It is comfortable to hold, and the hand will not get tired in the process.

How to knit a women's voluminous hat

Now that everything you need is ready, you can start knitting. But first, let's decide on the size.

How to take measurements

A beautiful and appropriately sized finished product is difficult to make without taking measurements. Therefore, do not neglect this step. We need two measures.

OG (head girth) - the volume of the product depends on it.
MV (height from the crown to the bridge of the nose) - determines the desired height of the accessory.

If for some reason it is not possible to take measurements or the product is knitted as a gift, you can use the standard size chart.

Age	OG, cm	MV, cm
breastfed babies	25	11
Small children under 6 years old	35–40	10–15
Children and teenagers	40	19–20
Adults (small and medium sizes)	52	22–25
Adults (large size)	60	21–23

After the measurements are ready, you need to decide on the number of loops. The linked sample will help with this.

Cast on 10 stitches and work 10 rows in the pattern you plan to make the hat. Measure the sample with a ruler and, based on the exhaust gas measurement, calculate the required number of loops.

Attention! For the accuracy of the calculation, count how many loops are in 1 cm of the canvas.

For example, if there are 2.5 of them, and the OG is 52 cm, then the number of loops will be: 52 * 2.5 = 130.

How to knit a hat with fluffy columns

A voluminous hat for women can be knitted in several ways. The most common are knitting from the bottom up and from the top down. Before you get started, you need to learn how to knit the basic pattern.

Lush columns

Cast on the number of loops, a multiple of 5 + 3 lifting loops.
First row: *three double crochets, two air loops*. Continue to the end.
Second row: four lifting air loops, 2 air loops.
Next, in the arch of the two loops of the last row, knit 3 columns, proceed to create a magnificent column. * Yarn over, insert hook behind the second stitch of the last row, pull out a long loop *.
Repeat from * four more times.
Then knit all loops together. Knit an air loop and three columns from the next arch. So to the end.
The third and all subsequent rows are similar to the second.

The first way of knitting: from the bottom up

Cast on 140 stitches for 28 pattern repeats. You can score more or less, as long as the number is a multiple of five. Connect in a ring.
Knit two rows in the round according to the description of the pattern.
Knit the third in the opposite direction. This is necessary so that the columns look the other way. Do this until the end of the work.
Having reached the required height, start cutting the loops.
In each next row: instead of groups of three columns, knit two; knit one instead of two. And make lush columns not from five loops with crochets, but from four.
Next: conditionally divide the canvas into four equal parts. At the end of each of them, reduce one rapport. Do this for six more rows until four rapports remain.
Pull eight single crochets into a ring, secure.

Second way: top to bottom

Dial a chain of six loops, connect into a ring.
Make 6 lush columns like this. * Yarn over the hook, pull the working thread through the ring * five times. We stretch the thread through all the loops.
Knit the rest of the rows as follows. Add columns in the third after one, the fourth after two, the fifth after three, and so on.
when the width of the cap is necessary, continue knitting without increments.
After knitting to the required size, break the thread.

The hat is ready, it can be decorated with a pompom.

Reference. In the second version, the lush columns are even, and it is knitted in a circle.

How to make a pom pom hat

The finished product looks very interesting with a fur pompom. To make it, you will need:

piece of natural or artificial fur;
strong thread;
scissors;
a piece of synthetic winterizer
ribbon.

The work is performed according to the following algorithm.

Cut out a circle from cardboard. The larger it is, the larger the pom-pom will be.
Attach the template to the fur from the wrong side, circle, carefully cut out.
Take a thread with a needle, sheathe a circle with large stitches along the edge, without fixing the ends.
Roll the synthetic winterizer into a ball, tie it with a ribbon, leaving long ends, so that later you can attach the pompom to the hat.
Insert the synthetic winterizer inside the pompom, tighten the ends of the thread and tie into a knot.
Attach the finished pompom to the headpiece with ribbons.

Wear to health!

In the modern world, the word "handmade" has long and firmly become synonymous with exclusivity, style and quality. Crochet has become a separate area of needlework, which today occupies the minds and hands of many thousands of women. Knitted hats for self-confident women are especially popular. This area of crochet needlework has a strong position, as it requires minimal skills, a small amount of time and low financial costs. And besides, hats are relevant in any weather and at any time of the year.

Many women's hats are based on the scheme of a women's hat, namely, simply flat circle:

Based on this scheme, you can get both a winter hat and a summer panama.

We take on crochet knitted hats for women

The key to a good hat is always the choice of yarn: for knitting hats for autumn and winter, it is better to choose warm types of yarn, such as merino or alpaca wool. Such a thread will be warm, hypoallergenic and very pleasant to the body.

You can choose yarn with the addition of synthetic threads, then the thing will be more durable. For summer panamas, it is better to choose cotton threads, the thinner the thread, the more delicate and lighter the panama or hat will be.

When the threads are selected and the hook is selected, we return to the flat circle pattern. We begin to knit from the crown, diverging in wedges with increases in different directions. Having tied up to the desired diameter, we make increments less often until we get the volume of the cap corresponding to the head of the model. Next, we knit in a straight line to the desired depth of the cap.

A special highlight can be the choice of pattern. So, for example, choosing an openwork pattern, you can get a nice panama:

And having tied the fields, you get a hat:

If an autumn knitted hat is conceived, the pattern should be chosen more dense, and the yarn warmer.

There are a great many patterns, here are some of them that a beginner needlewoman can master:

This pattern is knitted according to the scheme below:

A simple mesh pattern is suitable for simple summer hats and light autumn hats.

The weave of the pattern below is denser and more embossed. The pattern itself is more demanding on the choice of yarn, it will look organic if the yarn is with a slight sheen or a small pile.

A beautiful and delicate shell pattern will decorate a panama hat and add sophistication to the image:

Several videos with different patterns can be viewed below:

As you can see, you can continue indefinitely, and each needlewoman will be able to choose a pattern that she will like! In the video below, you can see how a simple, but nevertheless quite wearable hat is knitted.

The key to success in the design of women's crochet hats

If you pay due attention to the decoration of the headdress, then the output will be an original thing of your own design. A hat can be decorated with a brooch, beads, buttons, wooden beads, etc. But you can also tie the decoration using the same crochet hook. For example, Panamas decorated with flowers look great: