home › It's cozy at home › How to sew a round pencil case. How to make a beautiful pencil case for a school for a first grader, girls and boys, for teenagers and high school students with their own hands: ideas, master class, patterns

How to sew a round pencil case. How to make a beautiful pencil case for a school for a first grader, girls and boys, for teenagers and high school students with their own hands: ideas, master class, patterns

A pencil case is not just a school attribute, but useful thing to help organize your workspace. You can put pens, pencils, felt-tip pens, erasers, rulers, sharpeners and other stationery in it. So that you or your child have an exclusive pencil case, you can sew it with your own hands.

How to sew a pencil case with your own hands?

You will need:

Canvas, size 18x7 cm;
3 multi-colored cuts of the 1st and the same fabric, different sizes- 18x4.5 cm; 17x5 cm and 17x6 cm;
Lining fabric, size 17x18.5 cm;
Batting, size 17x18.5 cm;
Zipper 17 cm;
measuring tape;
safety pins;
Needles and notes;
Scissors;
Sewing machine.

Instruction:

Lay the colored pieces of fabric and the canvas next to each other on the table. Sew all the pieces together with an open seam. Then sew along all the segments with the same seam. Place a piece of fabric for the lining next to it, align them and fasten with pins. Sew them on the 1st side.
Turn the sewn fabric inside out and attach the zipper so that the zipper is on the right and the zipper is hidden by the fabric. The stripes on the fabric should be perpendicular to the lightning. Fasten with pins, then sew on a typewriter.
Divide the fabric into lining and outer, fold over each so that free edge touched the other, unstitched edge of the zipper. Fasten with pins, then sew on a typewriter in 3 layers. As a result, you should get a sharp cylinder with lightning.
Open the zipper, turn the pencil case inside out. Lay it out so that there is an equal amount of fabric to the left and right of the zipper. Pin the open ends of the cylinder together. Be sure to sew the zipper tape with an overlock or zigzag on a sewing machine. Trim off the excess zipper.

Master class from experienced needlewomen

You will need:

Tube from toilet paper or paper towels- 2 pcs.
Scissors;
Cutter;
Lightning;
masking tape;
Fabric (fleece or felt);
Threads and needles.

Instruction:

Cut 1 tube. Tape the 1st and most of the 2nd with masking tape. A small part of the 2nd tube will serve as a lid. Now sew a cover for your pencil case. Suitable for the child bright colours- this will cheer you up, and the pencil case will not be lost in the baby's backpack.
The cover must be freely put on the tube. Sew the zipper into the cover and sew the edges. For the lid and bottom, cut out 2 circles from cardboard, glue pieces of fabric to them (you can use other colors than the cover itself).
Sew the bottom and lid in place.

Pencil cases for girls: options

simple pencil case

You will need:

Bright oilcloth or beautiful fabric;
Lightning - 20 cm;
pins;
Threads and needles;
Scissors;
Sewing machine;
Decorative elements.

Instruction:

Cut out 2 pieces from the base material, measuring 20x10 cm. Fold the fabric and snake with the right sides so that the material is located on top of the zipper and carefully align the edges. Temporary stitch the zipper and fabric to make it easy to sew on the machine. Using a sewing machine, sew along the basting without touching it. Do exactly the same manipulation with another piece.
Open the zipper and sew the pencil case along all the edges. Turn it inside out and close the zipper. The finished pencil case can be decorated funny figurines, beads and flowers.

Beautiful pencil case

You will need:

The main fabric for the pencil case - 38.1x43.2 cm;
Overlay fabric - 38.1x43.2 cm;
Batting - 25.4x43.2 cm;
Harness - 115 cm;
Pencil;
Needles and threads;
Scissors;
Spray;
Lightning - 40 cm.

Instruction:

Apply any design on the main fabric. Make sure that the applied contours can be easily washed off. Fasten the fabric with batting and quilt along the applied contours. Rinse the contours with a spray bottle.
Now you can make a frame for the zipper. Make limiters, stitch the main fabric and lining. Stitch the face of the stopper to the underside of the fastener frame. Treat the edges of the pencil case with a beautiful tourniquet.
Make cuts on the folds - this is necessary so that the fabric does not bulge. Sew the outer and inner parts of the pencil case and the lining. Sew them face to face so that the seams are not visible. Turn out the pencil case.
Pin and stitch 1 side. In the same way, issue the 2nd, leaving an unsewn segment. Turn the hole inside out and sew with a blind stitch. The finished pencil case can be decorated with flowers or beads.

In this article we will talk about how to make a pencil case for school with your child.

It's no secret that any child wants to have such school supplies, which are not only easy to use, but also allow you to stand out among your classmates. And what can help you stand out better than a thing made by hand? Let's talk about pencil cases today.

Beautiful, cool do-it-yourself school pencil cases: ideas, photos. How to decorate a school pencil case made by yourself?

So, for starters, you can get acquainted with the ideas. Will any of them inspire you?

How to make a beautiful pencil case for school out of paper and cardboard: a master class

For similar school accessory useful:

Cylindrical Cardboard Tube

IMPORTANT: In order to facilitate the work, you can not glue a similar pipe separately, but take it ready. For example, from under a paper towel.

Wrapping or plain colored paper
multi-colored cardboard
Elastic band - preferably wide. And colored
Hole puncher
Stationery knife
PVA glue or double sided tape

Procedure:

You need a cardboard blank cut with a knife into two parts.
Each of the received parts is necessary carefully wrap in colored paper. For fastening, both glue and tape are suitable.
Now stands roll colored cardboard into a tube so that the cylinder from it could be placed inside the workpiece described above.

IMPORTANT: Colored cardboard should protrude from the top cylinder by about 3-5 cm.

Then it's worth taking a smaller part cut cardboard cylinder (something like a cap). In it, parallel to each other, it is necessary to form a hole punch two holes.
In these holes you need thread an elastic band, securing it with knots. Such an elastic band will help the pencil case close tightly.

How to crochet and knit a pencil case for a school for pencils and pens: a diagram with a description

Such a pencil case does not require any complex patterns, it is very easy to manufacture. For a similar pencil case for beginners in knitting will need:

One skein of yarn

IMPORTANT: The yarn needs to be thick enough - in this case, the pencil case will keep its shape perfectly.

Needles or hooks
thick needle
Button

So, you can start:

Need to start with 30 air loops. After counting the second loop from the hook, you need to create 29 columns. The yarn is not required.
Now the second row. Worth creating lifting air loop.
In the next row you need to do 29 bars. The yarn is no longer needed.
Once the height of the rectangle reaches approximately 23 cm, the second row can be completed.

2 sc
Skip 2 loops
5 sb, carried out in one loop
Skip 2 loops
Skip 2 loops
In one loop - 5 dn
2 sc
Air loops in the amount of 10 pcs.

IMPORTANT: You need to thread it into the same loop that appeared in front of the air loops.

Skip 2 loops
5 sn, carried out in one loop
Skip 2 loops
Skip 2 stitches again
5 d in one loop
Skip 2 loops
2 sc

bottom edge the resulting rectangle should turn up.
top edge, which with a festoon, on the contrary, is necessary turn down.
Side seams worth processing single crochet.
On final stage button is sewn on.

How to sew a fabric school pencil case: patterns, instructions. How to make a school pencil case for girls without a zipper with your own hands?

For a girl, you can make a simple but elegant fabric pencil case. For him needed:

Textile
Scissors
hot glue gun

The accessory is made without sewing as follows:

piece of cloth rectangular shape necessary fold in half as shown in the photo

Side edges necessary cut

IMPORTANT: Doing this is exactly.

top hem also desirable cut

With glue joining the sides blanks

Now you have to take separate neat strip of fabric and attach it approximately to the middle of the blank envelope

The strip can then be glued on. But be sure to the bottom of the workpiece

Penal is ready! How to use it?

To the center Envelope fits pens and pencils

They are covered one part of the envelope

Then only remains tie in a knot glued strip

From fabric, you can make other pencil cases for girls. Here, for example, pattern for a pencil case-kitten:

How to sew a zippered felt school pencil case for boys?

Pencil case materials:

Lightning
Threads
Needle
Scissors

The work should go like this:

From felt you need to prepare 2 rectangles

IMPORTANT: The width of one should be about twice the width of the other.

Lightning needs to be positioned between these pieces of material
Now it is necessary sew in
Position the workpiece so that most of it was on top., a lightning - closer to the left edge
Now a silhouette of a whale is drawn. Lightning should fall on the mouth
Whale cut out
Need to cut another silhouette
Now it's your turn eye

IMPORTANT: For them you will need a white circle of felt and a black button.

Can be cut from white felt and fountain
Turning the workpiece inside out, you need to flash
Only after this can turn the whale front side

How to sew a pencil case for school out of jeans? How to sew a pencil case for teenagers and high school students of girls and boys with your own hands?

Old jeans can be found in almost everyone. Especially in teenagers. It is quite possible to give them a second life in the form of a fashionable cosmetic case, for which you will need:

two pieces denim each size 26x12 cm
Lining fabric of the same size. It is desirable that it be linen
The same size piece of batting
Zipper length 25 cm
Wax pencil, needles, threads, scissors. Sewing machine preferred
decorative elements

IMPORTANT: Additional pieces of fabric are needed precisely in order to better protect school supplies from impacts.

How to make a pencil case? Worth following is a simple guide pattern, which is also suitable for making cosmetic bags:

Dimensions can of course be changed. However, it must be remembered that Leave a seam allowance of at least 1.5 cm. Accordingly, the length of the lightning will also need to be changed.

In order to make a stitch, you can use the following scheme:

are being drawn lines wax pencil. The fastening of batting with jeans can be done with ordinary pins.

Then you can make sewing, then repeating the same with the second piece of denim.

The turn has come attach zipper. Its front part needs to be stitched to denim with batting.

Now it's your turn linen lining. It needs to be attached to reverse side lightning.

IMPORTANT: The lining must first be basted or simply folded over.

On both parts of the workpiece, you need to sew a zipper in the same way. As a result, you will get 4 pieces of fabric attached to the zipper from different sides.

Now you need to unzip and connect the fabric around the perimeter. The same must be done with the lining. It is desirable at the same time cut the corners of the linen lining So they definitely won't get in the way.
All that remains is turn out pencil case face out and put a lining in it.

How to sew a pencil case for a school with two compartments for a first grader? How to sew a pencil case for a math school?

For a pencil case with two compartments that will fit a lot of pencils and pens, will need:

Pieces of leather or at least A4 leather substitute - 2 pcs. They can be found in haberdashery workshops or just use an old unnecessary bag.

Colored pieces of leather
Zipper long
Thicker nylon thread
Needles - 2 pcs.
Paper or newspaper to create patterns
Eraser, ruler, pencil or pen, chalk, scissors
Lighter or matches
Awl, hammer, iron
Cutting board
Wax with scalpel desirable but not required

You can get started:

Draw on a piece of paper pattern. Convenient size - 245x195 cm. It is advisable to immediately round the corners.

IMPORTANT: To do this, you need to take some round object with a diameter of about 5 cm.

The resulting pattern is needed attach a piece of leather to the wrong side. After tracing, you need to cut two blanks. If used thick skin, you do not need to leave a distance for allowances. If the work is carried out with leatherette, it is worth leaving 1-1.5 cm for the allowance.

If the material is thin, it is recommended to process it dublerin. To do this, you need to cut out two pieces of dublerin according to the pattern, which must be attached to the wrong side of the skin and ironed. It is recommended to place a dry cloth on top.

It's time for the decor. If you want to arrange a pencil case in the form of a sheet school notebook, you can make markings for such a sheet on a white front piece of skin.

IMPORTANT: The most important thing is to draw all the details in a mirror image.

Now markup needs to be stitched on a sewing machine. The ends of the threads are pulled to wrong side.

Further, from pieces of colored leather, you can cut any application - numbers, letters, letters. The main thing is to draw them in a mirror image on the wrong side of the material. Then pictures cut out and sewn onto the pencil case.

If the edges of the workpiece are not rounded, it's time to fix it., smearing the corners with glue, and then nailing them with a hammer. The latter should be done through the fabric.

Time to put on the zipper. To do this, it is not completely unbuttoned, glued down in the middle of the pencil case as shown in the picture.

IMPORTANT: If the lightning has ferrule, it is desirable to carefully cut it and burn the cut line.

Then the zipper needs to be glued around the perimeter future pencil case. Its other end is glued similarly to the first, but only opposite it.

Time to work over the inside of the canister. With an awl on its front side, it is worth marking the places where an elastic band will be attached to hold school supplies.

cut off a few pieces of rubber.
Cut with scissors or scalpel holes, through which the rubber bands will be attached.
Rubber bands are threaded through the holes and fastened with a sewing machine.
Both front and back parts need glue. But it is also desirable sew. To do this, with the help of a ruler and an awl, you need to do, stepping back 2-3 cm from the edge of the pencil case, marks.

Now you can take thick nylon thread. It is advisable to treat it with wax - so it will not fluff and it will become better to slide. The ends of the thread must be threaded into different needles. When one is threaded into the hole, the second is threaded into the next hole towards the first. At the end of the knots, you don’t need to do it - it’s just worth burn the ends.

Such a pencil case can fit not only pencils, pens, but also mathematical accessories like a ruler. You can decorate such an accessory with numbers.

As you can see, making a pencil case with your own hands is not so difficult. A little patience and a drop of imagination - and now the original school accessory for the child is ready!

Different design options for homemade pencil cases: Video

Today, in fact, as it was before, it was not at all difficult to make a pencil case pattern with your own hands. Moreover, after spending just a few minutes of your time, you can make a pencil case for the girl that resembles the shape of a bow. In this case, you do not need to sew anything at all.

First you need to prepare a rectangular fabric and fold it in half. The sides of the edges need to be trimmed evenly. The top should be cut off. In this case, you need to try, because it is this side that should be very neat.

Next, you need not to sew the pencil case with your own hands, but to collect it, so to speak - it will be more correct. The sides need to be glued together using hot glue or superglue. The first option here will be the most appropriate.

The fabric strip should be placed right in the center of your pencil case. At the same time, leave enough fabric stock on all sides so that as a result you can tie a bow.

The strip should be glued to the bottom of the product. After that, put pens, rulers, pencils, etc. inside the pencil case. Next, turn the pencil case over and tie a knot. Then tie a bow. It may be big, it may not be. big size. Do it to your taste. That's all, now you know how to make a fabric pencil case with your own hands.

How to make a pencil case with your own hands using a plastic bottle

We also offer to consider the option of a pencil case for a child. school age using the most ordinary plastic bottle.

Of course, the option of a fabric pencil case is very interesting. But he, by and large, is suitable exclusively for girls. But you can also make such items, and with your own hands, and for boys, or universal options!

Ah, what are beautiful ways you can only imagine! In this case, no one tells anyone, there are only recommendations, and if it comes to your mind to supplement the product with something else, you can experiment. Surely you can do very original version pencil case, and many children will envy your student! You can't buy these products anywhere!

You need to prepare for the manufacture of a pencil case:

Plastic bottles, in the amount of two pieces. They should not be thin, it is best that the plastic is dense.
Take one beautiful color wide zipper. It can be made of plastic or metal, whichever you prefer.
Superglue, well, hot glue is the best option.
Scissors.

To make a pencil case from a plastic bottle with your own hands, you will need its lower part, moreover, from both bottles. The principle is this, both parts should be connected to each other using one zipper.

On each bottle, to begin with, it should be cut off at the top. First, decide how long your pencil case will be. This affects how long you need to cut the pieces.

For example, to store pens, felt-tip pens, pencils, you will need to make one long part and one short one. The first will serve to insert an accessory into it. The second - as a cover.

Then take the lightning. It should be checked correct length lightning matched. This is easy to do by simply wrapping your bottle in bulk with a zipper. In the event that the prepared zipper is long, it must be shortened by cutting it off on the opposite side of the one in which it ends.

Approximately the total length of the zipper should be one and a half centimeters longer than the circumference of your bottle.

When you start gluing the zipper, the dog should be outside, the ends of its zipper are glued directly to the plastic parts from the inside. Each of the halves should be glued in turn, for this the zipper must be completely unfastened.

In the process of gluing, make sure that the dog moves freely along the zipper. This means that you need to leave at least a little space for it. Be careful. Do not stain your pencil case with glue during its manufacture!

Making a pencil case for the school with your own hands is not only a budget option, but also the opportunity to show creativity and their design abilities. Sewing a pencil case will become an exciting activity for spending time with a child, and later it will become a cute little thing in everyday life school life. Master classes on creating pencil cases will help you create an identical version of the pencil case or come up with your own completely new one.

Plastic bottle pencil case

Necessary materials:

2 plastic bottles(bottles must be taken of the same type, type, volume and from dense plastic);
colored zipper with slider;
glue gun (hot glue) or Moment glue;
scissors.

We decide on the length of the future pencil case and cut off the top of each bottle. To determine, you need to take a pencil or pen so that it fits freely into the body of the pencil case. From the bottles you need to make two parts (long - the body of the pencil case, short - the lid).

The pencil case will be fastened with a zipper. The length of the zipper must be calculated based on the diameter of the bottle. You need to take a zipper and wrap it around the bottle. For convenience, it is worth leaving a margin for a diameter of 1-1.5 centimeters. The excess part of the castle must be cut off from the side of the slider.

To glue the zipper, you need to unzip it.

You need to start gluing the zipper with inside future pencil case.

It is worth considering the moment that the slider should move freely along the zipper, when gluing, you need to step back a little from the edge. First you need to glue the zipper to one part of the pencil case.

Check if the zipper is fastened. The slider should move freely and freely connect the zipper without leaving any gaps.

Glue the second part of the zipper to the other bottle.

For the aesthetic appearance of the pencil case, it is necessary to avoid getting glue on the outside of the zipper and the bottle itself.

We put pens and pencils into the bottle, fasten the zipper and budget, creative option pencil case is ready.

Pencil case

Necessary materials:

2 cardboard cylinders (sleeves) from toilet paper;
stationery knife or scissors;
felt fabric of the desired color of the future pencil case;
lightning;
cardboard;
needle;
thread for sewing;
scotch;
glue.

One sleeve must be cut into two parts in a ratio of 1: 3. To do this, you can use scissors, but it is more convenient to do this with a clerical knife.

Most of the sleeve must be glued to the whole cardboard cylinder with tape.

Prepare 2 pieces of felt fabric according to the size (length and diameter) of the glued cylinder and the remainder of the cut (this is the cover of the pencil case). Sew a zipper to the fabric, thereby connecting both parts of the felt.

The resulting rectangle of felt with a lock must be folded in half lengthwise, right side inward. Accurately chop off the folded edges with pins and stitch.

Turn out the stitched part. Lubricate cardboard parts with glue and put in a felt case.

From thick cardboard two identical circles. The diameter of the circle is equal to the diameter of the sleeve.

For the density of the pencil case, several cardboard boxes can be used in such a base.

From felt you need to cut out circles equal to cardboard. For convenience, you can cardboard circle put on felt and circle.

The felt must be glued with a cardboard circle and sewn to the main part of the pencil case (top and bottom).

pencil case book

Necessary materials:

two pieces of leatherette or A4 leather;
long zipper with slider;
2 large needles;
a sheet of paper or cardboard;
dublerin;
thick nylon thread;
scissors;
a hammer;
knitted elastic band;
glue "Moment";
lighter;
ball pen;
ruler;
iron;
marker;
decorative materials or colored pieces of leather.

Draw a rectangle measuring 245 by 195 millimeters on a piece of paper. Round the corners equally with the help of improvised round objects.

Attach the pattern to the skin and translate it, taking into account allowances of + 1-1.5 centimeters for the outer part of the pencil case. For the inside, allowances are not needed.

The skin needs to be strengthened with dublerin. Cut out 2 parts, according to a paper pattern, from dublerin without allowances. Attach dublerin to the skin with the sticky side. Smooth the skin through dense fabric, with a hot iron, from the side of the dublerin.

On the outer part of the pencil case (on the skin), you need to make, using a ruler, decorative markings with a ballpoint pen.

Stitch the markings with a sewing machine in different thread colors (fields, lines, cells). It is necessary to ensure that all ends of the thread are on the wrong side of the skin and are carefully knotted or glued.

From colored pieces of leather, you can make the design of a pencil case. You can also decorate the pencil case with ready-made purchased decorative details. On this stage you need to make curly triangular cuts at the corners of the leather part.

Lubricate triangular cuts and edges-allowances with glue. The glue needs to dry a bit to set quickly. Wrap the part with a cloth and carefully tap the edge with a hammer. The edge should stick together and the part around the perimeter should be even.

Mark the center of the pencil case. Open the zipper and paste over the leather part around the perimeter with it. You need to start pasting the lightning from the center from the top with the slider. Glue the zipper in a circle, and then cut off the excess part. Singe or sheathe the edges of the zipper.

Design inner part pencil case. Take a second piece of leather and sew rubber bands to it to hold pencil pens, rulers, erasers, and more.

The edges of the elastic must be tucked to the wrong side, singeed and glued to the skin.

Lubricate both leather parts (outer and inner) with glue from the inside and connect, pressing firmly on long time(can be put under the book).

The end result should look like this:

Denim pencil case

Necessary materials:

two pieces of denim measuring 26x12 centimeters;
two pieces of plain fabric, for lining, measuring 26x12 centimeters;
a piece of batting or thin insulation measuring 26x12 centimeters;
soap, chalk or wax pencil for marking;
scissors;
needle;
sewing thread;
zipper 25 centimeters long;
sewing machine;
ruler;
decorative elements (buttons, beads, flowers).

For unusual look pencil case, you need to quilt the outer denim and batting. To do this, you need to make a markup, as in the photo.

Fold the jeans and batting evenly together and pin them between the marking lines. Using a sewing machine, sew the fabric along the marked lines.

In the same way, you need to quilt the second piece of denim.

You can immediately sew decorating elements on the outer sides of the pencil case.

Stitch the lining fabric to the wrong side of the zipper.

At this stage, you should get 4 pieces of fabric stitched to the zipper from different sides (jeans with batting, lining, jeans, lining).

Unzip the zipper and arrange the fabrics in different sides, as they should be (batting jeans - lining, jeans - lining), on the wrong side. Sew along the perimeter of the lining and denim parts separately. Turn out the pencil case, put the lining inside.

Have you always wanted to have in your portfolio things that you will not find in other comrades? You don't like it when someone has the exact same thing? Like to have original school supplies? Then these ideas are exactly what you need!

Pencil case - irreplaceable thing not just in school or college. Pencil cases are also used by adults at work. If you want to pick up a pencil case in the store to your taste and color, but, unfortunately, this was not the case. Then make it yourself!

In this article, we will offer you several options for creating a do-it-yourself pencil case with detailed description and instructions. You don't even have to overpay, because you will have almost all the materials at hand! Made with my own hands the thing will always please you, you will definitely be proud of yourself, because the result will pleasantly surprise you. So let's get started!

Cylinder-case from toilet bushings

Toilet roll case? Do not be surprised, because the materials are not important to us. The result will be an original pencil case, which will not give out for anything what it is actually made of. For this pencil case you will need:

2 toilet sleeves,
the cloth,
zip lock,
scissors,
needle and thread,
stationery knife.

Progress:

Prepare the bushings. We cut one sleeve neatly and evenly in half.

Attach the second cut off part of the sleeve for now with tape.
We circle the bottom of the future pencil case. The bottom of the pencil case should be made of durable cardboard. There should be two cardboard circles.
We do the exact same action on the fabric that you want to choose. It can be absolutely anything. There should also be two fabric circles.
Now we take our cylinder and wrap it in fabric with the front side inward, making reserves around the edges.
Mark on the fabric where the two sleeves will join. It is in this place that you need to carefully sew a zipper.
Mark the line where you will need to sew the fabric and start sewing the case for the pencil case
Then unscrew the cover, take the cylinder and separate from it the part of the cylinder glued with adhesive tape, which will be the cover. Sew a zipper to the lid so that when you open it, it freely leans back and easily closes the future pencil case.
Now sew 2 cardboard circles to the pencil case, to which fabric circles are already sewn in advance.
Remove the cover again, turn it inside out front side and you can put it back on, rejoicing at the result. The original cylindrical pencil case is ready!

You can glue the cover to the pencil case. So the fabric will not go anywhere.

Delicate felt pencil case

This is a truly original pencil case that will appeal to delicate natures. The pencil case is made of felt, thanks to which it is pleasant to touch it. And the way to store school supplies here is very different from ordinary pencil cases.

For a felt pencil case you will need:

felt fabric,
silk Ribbon,
scissors,
hot glue.

Cut out a rectangular piece of felt. The required size is determined by the height of your accessories. To do this, it will be enough to lay them out on the fabric. Apply hot glue between the laid out accessories. Keep in mind that you need to leave a margin for each item. Bend over lower part fabrics to make it look like you've covered your school supplies with a blanket. Now take out the accessories and decorate the future pencil case with silk ribbon, also gluing it with hot glue.

Then turn the pencil case over and stick a long silk ribbon with which we will tie our pencil case. Our cute pencil case is ready! Put all the accessories back into the pencil case, waiting for the glue to dry completely. Wrap the pencil case in a tube and tie it in a bow.

For such a pencil case, you can choose felt different color, you can decorate it not only with a silk ribbon, but also with braid, buttons and other decorations.

Pencil case in a notebook

This simple tip is for those who don't want to carry a pencil case with them. This method is great for students!

For such handy trick you will need:

ring notebook,
elastic,
hot glue.

Progress:

Open your notebook. We will place the pencil case on a hard cover.
Now think about what supplies you will take with you. Cut elastic bands to fit the width of your accessories.
Glue the elastic to the cover.

To keep the accessories firmly in the rubber bands, stretch them, and then glue.

Now you can put each accessory in its place.

like this tricky way make your study days easier. Now you have more space in your bag.

Original zipper case

You definitely haven’t seen such a pencil case with your comrades, and it’s unlikely to be found in a store. Surprise yourself first unusual result and be sure that your surroundings will notice and appreciate your unique pencil case.

For such an original pencil case you will need:

lightning different colors the same size
thread and needle,
scissors.

Progress:

Lay out all the zippers on the table.

Arrange the zippers so that the colors do not repeat. So the pencil case will turn out more colorful and unique.

Now sew all the zippers together so that you get a single piece of fabric with zippers.
Now turn the zippers right side down and sew the edges together to form a barrel.
Now from this barrel we will make a beautiful and colorful candy. To do this, open at least one zipper so that you can turn the pencil case inside out.
Now we sew the pencil case on the sides and turn it inside out. Our original, colorful and very beautiful pencil case is ready!

As you can see, making such an original, beautiful and unusual pencil case turned out to be easy! Such a pencil case will fit as a pencil case. Absolutely anyone will be happy with such a pencil case!

Pencil case in your favorite fabric

Surely everyone has any blouse, T-shirt, napkin. Well, what if, due to some unpleasant incident, your favorite thing has deteriorated, for example, you burned it and put it indelible stain. Of course, it will be a pity to throw away your favorite thing. You have a chance to breathe into her new life and translate it into another useful thing. We suggest you make a pencil case that you will take with you every day, and your favorite thing will remain in your memory and will always delight you.

Sewing a pencil case out of fabric is very simple. For this you will need:

facial fabric (your favorite),
plain fabric for lining,
zip lock,
scissors,
thread and needle,
pins.

Progress:

Prepare two fabric flaps: for the front of your favorite fabric and for the lining.
Sew a zipper between these two fabrics. Don't forget to turn the fabric right side down towards each other. We are doing this procedure with two sides of the zipper.
Now you definitely need to open the zipper, otherwise you will not be able to turn out the pencil case. Now you need to join the two sides by carefully stitching them with a machine stitch.
We twist. Our pencil case is ready!

Here's another idea for you and another proof that sometimes you don't need to overpay even for things like a pencil case, when you can make it for free, in just half an hour!

You can diversify this idea using different fabrics. You can even sew a pencil case using the technique patchwork. Nobody will have such a pencil case!

An original and reliable pencil case from an unnecessary disk box

The name itself already sounds quite tempting. Indeed, if you have an unnecessary disk box lying around, then why not try to implement this idea and make such a pencil case? A very interesting idea too!

So, for such an unusual pencil case you will need:

disc box,
piece of fabric
wide band,
glue,
scissors,
thread and needle.

Progress:

We cut out a rectangle from the fabric, which will be equal to the width of the right side of the box from the disk. We cut off the elastic band of the same width.
The cut off elastic must be sewn in the middle to a rectangle of fabric. This design will hold our pencils in the pencil case.
Then, on the elastic itself, we mark the cases according to the size of our accessories. After, according to our marks, we begin to sew the elastic to the fabric so that we finally have pockets.
Now this design can be safely glued on right side boxes.

To make it less boring inside such a pencil case, left side you can put a white sheet of paper. There are just special fasteners. On this sheet, you can paint pens or leave various notes for yourself. You can also decorate the outside of the box with your own design.

Velvet pencil case from the box

Everyone will definitely find unnecessary boxes. No penalty? Use the box, and you won't have to overpay at all! Making such a pencil case is easy!

For this idea you will need:

rectangular box that holds school supplies,
decorative velvet or velvet paper, velvet fabric,
scissors,
glue.

Progress:

Wrap your box in fabric and measure the cut lines. If there is no fabric, then you can use cardboard with a velvet surface.
cut off required amount fabric, and then glue on the box.

That's all! Two easy points and an exquisite pencil case is ready!

If you already have a velvet box, for example, from jewelry, then you don’t need to do anything, just take out the excess and that’s it. And if you don’t have velvet, then you can use felt. It is as soft as velvet. And if there is no felt, then any other fabric will do. for sale special fabrics for decorative works on an adhesive basis. Very convenient and efficient!

Leather pencil case: stylish and original

If you creative person and do not want to use ordinary and boring pencil cases, then this idea is definitely for you!

For a leather pencil case you will need:

rectangular piece of leather
stationery knife,
ruler,
braid or silk fabric.

Progress:

First of all, we measure required size leather patch. It should be cut evenly and neatly into a rectangular or square shape.
Stationery knife we make vertical and horizontal cuts in a checkerboard pattern. To make the cuts even and neat, be sure to use a ruler.
On top of the flap in the middle, we sew two strips of braid or silk fabric.
We pierce our pens and pencils into the holes, wrap and tie the pencil case into a bow. Our original and very interesting leather pencil case is ready!

To make the pencil case look prettier, use a wide braid or ribbon to make the bow voluminous. There is no need to overload the pencil case too much. various decorations. Enough braid, because the skin is quite strict and elegant material. You can use leather of different colors if you wish.

Interesting and funny pencil case in the form of a cat

Do you really like cute things? Do you want cute little things to please you in the classroom? Then this pencil case should definitely be created by those who love cute things like a cat pencil case. Perhaps you just love cats, but there was no pencil case in the store in the form of a cute cat. Do not be upset, because such a cute pencil case can be made with your own hands!

To make this cute cat pencil case you will need:

the cloth,
scissors,
needle and thread,
zipper for lock.

Progress:

First you need to prepare blanks. These are ears, nose, body and so on. See sample.
Then we mark these blanks on the fabric and cut them out.

To make the pencil case look original and interesting in a toga, combine different fabric by color.

Sew a zipper between the body parts. Do not forget that we turn the fabric face down.
Now we sew the details of the cat's muzzle, we sew the ears to the muzzle.

For simplicity, you need to attach the ears immediately when you start sewing on the muzzle. This will make it easier and faster.

Now you can turn the pencil case inside out and add a nose, eyes and antennae to the cat.

You can use unnecessary buttons as eyes for your cat, and you can simply draw the antennae with a black felt-tip pen.

Here we have such a cute and charming pencil case in the form of a cat! In fact, if you try, you can make pencil cases in the form of different animals, for example, in the form of a dog, mouse, snake, panda and other animals! Then the pencil cases can be changed every day and surprise others, and most importantly, please yourself.

Denim pencil case with pockets

It doesn't matter what season it is in the yard, but we wear jeans all year round. Even after the creation of the first denim pants a lot of time has passed, and jeans are still in trend and are simply irreplaceable in modern wardrobe. No matter how sad it is, jeans wear out quickly, and sometimes it’s a pity to throw them away. This is where thoughts come to mind about what can be made from denim. In this article, we get acquainted with the ideas of creating a pencil case with our own hands, so jeans will be very useful here.

To create a denim pencil case you will need:

unwanted jeans,
scissors,
thread and needle or sewing machine,
braid or any fabric tape,
optional extra fabric for the inside of the pencil case.

Progress:

First, measure out the required size of a denim patch so that all your pens and pencils can fit in it. We choose the length more at the flap, since we will bend the lower part of the fabric.
Then place the fold over the bottom of the fabric. It is this part that will be the pocket for pencils. You can immediately lay out all the pencils in the flap, or you can make markings and start stitching the compartments for each pencil.
Sew two fabric ribbons on the side.
Place all of your pencils in each compartment, wrap your denim pencil case in a tube, and tie the ribbons into a bow.

So that the front side of the denim is not visible inside the pencil case, any fabric can be sewn on before marking the pencil compartments. It will be even more beautiful and original.

Here is such an interesting, and most importantly, useful pencil case made from old denim trousers. This pencil case looks stylish and fashionable!

Summing up

Here are some interesting ones we have collected for you in this article. Now you can choose the most suitable way and an idea for creating a pencil case with your own hands. As you can see, the material is not so important, because the main thing is the result!

Now you know a few interesting ideas and ways to update your school supplies, make them original and unusual. In stores, sometimes there is no such pencil case that you liked at first sight. If you are faced with such a problem, feel free to start creating your pencil case.

In addition, a hand-made thing will please you more than a thing bought in a store. And if you feel sorry for parting with your favorite things, then you can give them a second life and make something new and really useful out of them!

Popular in category: