How to distinguish good mink from bad quality. How to check a mink coat for quality

A luxurious warm fur coat will not only warm you in the cold, but also emphasize the status of a woman. A good thing costs a lot, so it’s worth figuring out how to check the quality of a fur coat before purchasing, so as not to regret the money spent.

Knowing how to check the quality of a fur coat, you will not be disappointed in the purchase.

Which fur is warmer

Arctic fox, fox, sable and muton warm best of all. Mink, beaver and nutria are a little behind in saving heat. And the rabbit, marmot and ermine almost do not warm. In terms of wear resistance, beaver fur is in the first place, fur coats made of sable, mink and raccoon serve for a long time. The most short-lived - only for two winters - a rabbit and a chinchilla.

How to check a fur coat from any fur?

Look at the underside. For high-quality models, the lining is not sewn up tightly - it is possible to examine the core. If it is yellow, dry, with cracks, then the skin is old and will quickly become unusable. You need to choose fur with a white elastic inside.

Estimate the weight. It must be adequate. An overly heavy fur coat indicates that the fur is old. Too easy - that the furriers saved. The craftsman pulled out the skins, reducing the thickness of the skin and the distance between the hairs. The product has become lighter, but also colder, and it will wear out faster.

Feel the pile. Gently pinch the fur and check if there are any hairs left on the fingers. If so, then this product is not worth buying. Additionally, iron the fur coat "against the wool" and vice versa, wrinkle it in your fist. The pile of a quality product should be easily restored.

Check seams. If they are not, pieces of fur were glued together. Such products are not durable.

You need to purchase a fur coat from winter fur, with a thick down. It is better if the animals lived in the wild: things from their skins are worn longer.

How to check a mink coat

Mink coats are loved for their silky beauty and durability. Such products serve for years and almost never go out of fashion, they are easy to care for. But only if the coat is made to last.

How to check the quality of a mink coat? Natural mink is tougher than a rabbit or marmot that “pretends to be” it. For fakes, the pile is usually shorter. The surface of the fur must be smooth, without scars and bald spots.

Sheared mink will last longer, but such a fur coat is colder

With the onset of cold weather, perhaps every female representative begins to dream about a fur coat. And even if she has one, there will still be a desire to acquire another one.

Buying a fur coat from the most valuable and respectable mink fur today is a profitable purchase. A product made of high-quality fur, of good cut and dressing, can warm the hostess for a long time, bring her joy and cause envious glances of others.

It is difficult to detect a fake, but it is possible.

Unfortunately, in practice, buying a fur coat is not always a pleasure. The market is full of beautiful mink coats, sewn somewhere on the knees in the basement.

At first glance, a fake cannot be distinguished from a quality product, however, after a short period of time, the fur may lose its external gloss, its hairs will begin to crumble, and the fur coat may come apart at the seams.

In order to avoid trouble during the purchase and subsequent wear, we will tell you how to determine the quality of a mink coat, give general advice when choosing. So, the choice of a mink coat, what a potential buyer, first of all, should pay attention to:

1. Fur quality;
2. Seams, cut;
3. Color;
4. Price;
5. Place of purchase.

Recognize quality fur

A fur coat cannot be light.

First of all, we pay attention to the quality of the fur. The mink coat on the outside has a shiny, even fur of the same color. We carefully examine the product.

The pile of a mink coat should be dense; when running a light cloth on the outer side of the coat, there should be no traces of paint indicating the color of the product.

Shake the fur coat well - there should not be a characteristic dry crackling, indicating improper or long-term storage of the fur coat in the warehouse.

Swipe your hand “against” the wool - high-quality fur will instantly take its original position. Evenly dense smooth fur with a characteristic iridescent sheen along the entire length will speak of a high-quality fur coat made of good quality mink.

Let's move on to the wrong side. A mink coat inside should have a soft skin that is malleable to wrinkling. Mezdra - the reverse side of the skin should be soft, without cracks and squeaks when squeezed, elastic. Examine the lining of the fur coat.

As a rule, many manufacturers either do not use the lining at all, or do not sew the lining along the bottom edge of the product, or leave some part of the lining not hemmed to the fur, so that the potential buyer can be convinced of the quality of the mink skin. The yellowness of the skin indicates its not the first youth.

We pay special attention to internal seams. It is desirable that they are not adhesive, such products often creep at the seams. In this regard, it is not recommended to purchase a product from mink pieces, since the joints between them are often glued, which means they are prone to sticking.

In general, it is believed that the fewer seams, the better the fur coat.

It is also worth noting that a mink coat should not be too light. Yes, in comparison with a muton, such a fur coat is lighter, but you should be alerted if the fur coat is very light.

Most likely, the manufacturer stretched the leather too much during processing and it was made for an area with a warmer climate than in Russia.

In any case, it is recommended to choose fur coats in a specialized store that has been dealing in furs for many years and specializing in mink coats. Here, the storage conditions of products are certainly not violated, stable deliveries are established, there are certificates, discounts and promotions that are attractive to buyers.

And yet you should not "peck" on models with too low prices. Most likely, sellers thus seek to get rid of stale models or, possibly, products with hidden factory defects.

Choosing a mink fur coat based on the type of figure

It is important to choose the right style.

Experienced specialists work in popular fur salons and stores, who will help you choose a style that takes into account the wishes of the client, her age, and features of the figure. Choosing a fur coat according to the type of figure is not an easy task, but very feasible.

Models of both light color and brown, of any length, are suitable for slender owners of tall stature. However, if you don’t want to appear even taller, then you should not choose a narrow floor-length model made of black mink - it will visually stretch the silhouette even more.

For girls and women of average height, those who want to appear slimmer, fitted models of medium length are suitable. You should also not choose models that are floor-length or, conversely, too short if you are not going to always flaunt in heels.

Female representatives of short stature are not recommended to choose models flared to the bottom with massive flared sleeves, since the volume of such a fur coat will eat centimeters of growth. Models with a length just below the knee are suitable for women with full legs, A-silhouette models are ideal for full women.

For owners of narrow shoulders and narrow hips, a mink coat model with a “rich” hood and a flared or straight cut will serve as an ideal outfit. The problem of narrow shoulders is easily solved by models with shoulder pads.

Girls with broad shoulders, on the contrary, will suit fur coats without a hood, but only with a neat collar.

Also, models without a hood will emphasize the beautiful neck of their owners. By the way, lately, more and more often you can see on sale models with small hoods or without them at all, but only with small narrow collars.

Thus, the manufacturer most likely seeks to save fur costs.

General rules when choosing a mink coat

Fur coat requires quality care.

Light tones will slightly add volume, that is, to fill, dark tones will slim. There is an opinion that light fur coats are only for the exit.

In fact, light fur is less practical, but today there are a number of means to keep the fur clean and bright. When buying light-colored fur, mentally prepare yourself to visit a dry cleaner at least once a year.

With mink fur coats, they will emphasize the individuality of the model. For example, long leather gloves are often attached to fur coats with short sleeves, and a mink or leather belt will perfectly emphasize the waist.

Today, fashion is changing rapidly, designers and fashion designers do not get tired of experimenting with furs. Fur cutting, bleaching, lamination, laser processing effect - all these methods allow you to create many interesting models, and decorative elements - buttons, rhinestones, locks, chains - allow you to make a separate mink model unique, and its owner - inimitable.

However, if you plan to wear a fur coat for at least 4-5 years, then it is better to give preference to classic models with a standard cut and without unnecessary trinkets.

In any case, it is better to carefully plan the purchase of a mink coat and take your time with the choice. Try on a few models, go home and sleep with thoughts about the one you like. And only then, having made a balanced, thoughtful choice, you will not regret an expensive purchase.

There is no need to neglect the general rules for using the product, because after all, a mink coat is an expensive purchase, and expensive things are often capricious and require careful care. No need to wear a fur coat in the rain or in wet snow. And do not forget about the proper storage of a mink coat.

It is recommended to store a fur coat in a dark ventilated place, in a non-synthetic cover on a hanger. To avoid impregnation of fur with unpleasant odors, it is not recommended to store a fur coat with foreign objects that have a specific smell. And it is advisable to put moth remedies next to the mink coat.

From this video you will learn how to choose a mink coat.

In contact with

Instruction

Having decided to buy, contact specialized fur stores. The wider the choice, the greater the chance of finding fur coat that you dream of. If you plan to pick up a model on the market or purchase a fur coat from a private seller, keep in mind that if a defect is found during wearing, you will not be able to return the purchase.

Choose a few models and try them on. The fur coat should sit well, not pull, not warp. If you are planning a fur coat with a jacket or thick knitwear, do not try it on with a thin turtleneck. Especially carefully evaluate the fit in the shoulder girdle and in the chest area. Do not console yourself that the fur coat will “sit down” on the figure over time. If you feel discomfort, look for another model.

Shake your fur coat. Small villi should not separate from it, it should not rattle or rustle. Properly processed fur does not emit pungent odors, its hairs adhere tightly to the mezdra, do not break off and do not bristle. Run your palm over the fur - it should be smooth, uniform, with a pile lying in one direction.

If the coat is dyed, rub the fur with a clean handkerchief. If you notice a trace on the fabric, refuse to buy - low-quality dyes are not so rare. Such a fur coat can deteriorate after the first snowfall.

Look under the hem of your fur coat. Long models are usually not sewn up so that buyers can see for themselves the quality of the fur treatment. The sewn-in lining is a reason to be wary. Perhaps the manufacturer or seller has something to hide. Feel the mezra - it should not be wet or hard. Well-dressed mezra is dry, smooth and silky to the touch.

Examine the seams. Make sure that the fur coat is sewn neatly, without warps and loose areas. The lining fabric should be dense enough - if the manufacturer has saved on quality, after a month of wearing the seams on the shoulders and in the armhole can disperse, and it will be problematic to sew them up. Check for hooks. If one or two are missing, demand a discount on a fur coat. This also applies to other small defects - for example, tightening on the lining.

Sources:

• mink fur

Wear is the main quality of any fur product. Mink is a unique fur. Not only is it very wearable, the mink is also unusually beautiful and elegant. A high-quality fur coat made of this fur will delight and warm you for ten or even more seasons. However, buying mink, you should be careful not to buy a fake. How to distinguish the real mink?

Instruction

Buy fur products only in a salon or store. With modern methods of processing fur, only there, in the fitting room, you can carefully examine and feel the fur coat, evaluate the quality of the processing of fur and seams, and check the color fastness.

Assess the plasticity of the fur. The mink fur is elastic and immediately returns to its shape. If the fur is not plastic, hard and puffy, then instead of a mink, they try to sell you a product made from a tarbagan - a Mongolian marmot. It is quite possible to run into such a fake when buying a “Made in China” fur coat.

In addition to cheap fur fakes, there is a danger of buying mink lower quality than advertised. Examine the mezdra - the reverse side of the skin. For dear mink with a purple or blue tint, can produce cheaper re-dyed fur. If the fur has not been dyed, then the mezra will be light.

Having a high-quality and expensive mink coat is the dream of many women. Such a thing is quite decently worth, and the price should correspond to the quality of the fur, tailoring and general appearance. Therefore, choosing for themselves a coat or short fur coat made of mink fur, many people think about the naturalness and quality of the fur coat.

What is a quality coat?

Due to the rapid growth and development of the industry, there are now a lot of fakes. Mink coats of good quality, not every buyer can.

The main criteria for assessing the quality of the product:

• weariness,
• appearance,
• heat-preserving qualities,
• brand.

One of the main criteria for a quality fur coat is its wear. The product must retain its original appearance and warming properties. On average, with careful wear, this figure is 5-9 seasons.

Next, the appearance of the fur is evaluated. There are many varieties of mink, but they are united by the uniformity of the fur, regardless of whether it was created from a single piece or small scraps. If the color is even, the wool does not crumble and does not break - it is clear that the thing is of high quality.

A high-quality fur coat is warm in the cold season and does not burden the shoulders of a woman. This is a feature of mink fur.

The last place in the list is occupied by the brand of the manufacturer. Many sellers specifically hang labels of expensive fashion houses on fakes. To determine the reliability, it is necessary to check according to certain signs of the manufacturer.

How to find out the quality of a mink coat

In order to get a really good and high-quality fur coat, you need:

1. Move the hairs and. The color should be light brown. This indicates the correct storage and coloring of the fur.
2. Run a damp cloth over the fur. There should be no paint left on the napkin.
3. Shake the fur coat and make sure that it does not crumble and does not shed.
4. Determine the quality of stitching. External seams on the product should not be visible, and the purl should be almost invisible.
5. it is better to choose stitched, not glued.
6. Check the quality by holding against the fur, as in the video. Good fur returns its original texture immediately.

To choose a good and warm thing, it is better to look for products made from male fur - it is thicker and fluffier. If the fur coat you like is very light, then this indicates its special processing by stretching the skins. This procedure significantly saves the manufacturer's costs, but has a bad effect on the heat saving and wear of the fur coat.

Also, the heat is affected by what period of the year it was made. During the summer months, the fur is thinner and lighter, while during the winter it is thick and fluffy.

How to find out the characteristics of fur

To correctly determine the quality of mink coats and the authenticity of mink fur, you need to understand it and be able to distinguish it from a fake.

High-quality mink fur must meet certain requirements:

• uniform pile and undercoat;
• short thick hair, which is surrounded by a down;
• deep, uniform color along the entire length of the product;
• downs should be gray than colored;
• silky to the touch, shiny fur.

If the product consists of small skins, they must be exactly sized. It is impossible to have patches, uneven seams or cuts (especially in the armpits, collar and hem). A quality indicator is a pleated lining in the neck area and the presence of an internal drawstring at the waist.

A very good indicator is the inside pocket. On the neck, the fur coat should be beautifully and comfortably fastened to protect the lady from the cold wind or snow.

What to pay attention to?

The owner of a future high-quality and beautiful mink coat, as in the photo, needs to carefully inspect the product for fakes, poor-quality cut, and improper storage of skins before buying.

So, the main conditions for buying a mink coat are:

• beautiful and carefully selected skins for tailoring;
• deep uniform coat color;
• well balanced hangers with excellent fixation of the product;
• the fur coat should not have folds and gathers;
• when walking, the fur coat should not stretch and hinder movement;
• the fur coat should sit beautifully on the owner, have beautiful tailoring and design, emphasize the figure of the owner;

Whatever product is purchased, it should bring joy and comfort to the owner. In such a fur coat should be warm and comfortable. It must be carefully worn and protected from negative impacts and excessive pollution, which will negatively affect the quality of the mink coat.

Before buying a mink product, it is necessary to carefully check the quality of the fur so that the clothing or accessory is practical and reliable.

There are several ways to help protect yourself from acquiring an impractical mink product.

1. 1. Buy fur coats only at specialized salons and stores. The probability of buying a low-quality product here is much lower than in ordinary markets. Of course, the cost of things bought in such stores is usually significantly higher, but the quality of the product is noticeably different.

1. 2. Check that you have all the required documents. At the time of purchase, you must provide a check and the necessary receipts.

1. 3. When buying fur coats, give preference to foreign manufacturers. Unfortunately, in Russia, most fur coat makers use low-quality materials. As a result, you buy a low-quality and impractical product. Of course, it is quite difficult to make sure that you are purchasing a fur coat from a foreign manufacturer, because now it is a common practice to falsify certificates about the supply of products from another country. In order to protect yourself from fraud, buy fur coats in trusted stores.

Methods for checking the quality of mink fur

Even if you buy a fur coat in a specialized salon and from a well-known manufacturer, it is still necessary to check the material for quality. There are some of the most common methods for testing the strength of fur.

1. 1. Quality fur is always soft and pleasant to the touch. Run your palm over it - softness and suppleness testify to the quality of the mink.

1. 2. Natural mink always has a bright color and shine. It should not roll into icicles, as the natural shape of the material testifies to the quality of the fur. In addition, pay attention to the downs (high-quality fur should be soft and smooth.

1. 3. Most often, in salons and stores, lighting is selected in such a way that products look more profitable. However, you will be wearing a fur coat in daylight, so any imperfections will be noticeable. In order to objectively evaluate all the advantages and disadvantages of fur, inspect near the window. Make sure the material has an even color. It should be free of creases, bald spots, faults and any other irregularities.

1. 4. Fur villi should be of the same length and lay evenly on top of each other.

1. 5. Before buying, it is important to check the reliability of the fur. Since the fur coat is used daily and in various situations (travel in a car, public transport), it is necessary to make sure that the fur coat will withstand any operating conditions and will not lose its attractiveness. To do this, you need to pinch off a few villi. If you have a few hairs left in your hands, then the material is of high quality. When the fur breaks out in bunches, this indicates a low strength of the fur.

1. 6. Inspect the back of the product, check it for damage. Check for damage and stains.

Checking the fur for durability is an important part of buying a mink coat! Before you buy a product, make sure that it is of high quality and practical!