Simple balloon flowers. Flowers made from balloons: the principle of working with SDM, simple modeling schemes

Not a single holiday can be imagined without aerial arches and flower arrangements from balloons. Balloons will always create festive mood even on a normal day! They help create a cozy and joyful atmosphere.

How to learn how to make flowers from balloons with your own hands? In order to begin this joyful and exciting activity, you need to acquire a lot of patience, as it is not easy. In the store, buy balloons, a special pump and beautiful ribbons for registration.
How to choose balloons for flowers?
There are balloons various sizes: largest – 12 inches – regular ball. Such balls are used for arches and flower stands. Medium-sized balls - 9 inches are used for flower petals. Small 5 inch balls are used for the center of the flowers.
According to their texture, the balls are divided into matte and glossy; here the choice is a matter of taste. For holidays, you can purchase balloons in specialized stores, where they are sold in large packages and in different colors. Buy several packs at once, thereby you will provide yourself with balloons for for a long time, because buying balloons in bulk is much cheaper.


How to tie flower balls?
Forget about threads, professionals have been tying balls into a knot for a long time. First you need to inflate the balloon using a pump. Inflate a balloon without a pump good quality Only professionals can do it.
When the ball is inflated to the right size, you need to wrap the tip of the ball around the middle one and index finger. Once you have made a loop, insert the tip of the ball into it and tie it in a knot.
Balloon flowers:
Balloon flowers with 4 petals This composition can be used not only for a bouquet, but as individual flowers. To make a flower you need 4 9-inch balls, 1 5-inch ball. You can choose different colors of the petals. For the middle it is better to choose a white or yellow ball.

You need to inflate the balloons separately, preferably they are the same size. You can simply put them next to each other when inflating and compare them in size, deflate or inflate them if necessary. Then we tie two balls together so that they look like a figure eight. We put the resulting balls on top of each other and twist them in the middle. You should get a base of four balls - a “four”. The ball for the center is placed in the center and the tip is wrapped in the middle of the “four”. The flower can be beautifully decorated paper tapes, which need to be twisted with scissors. Flower chandelier from balloons A flower chandelier is very easy to make. You should add to the already made “four” a “four” of 12-inch balls. They can be secured together with squares of double-sided tape.

You can also use heart-shaped balloons. The upper part will consist of a “quartet” of 5-inch diameter balls and a center of the same size. It looks very good when the heart-shaped balls and the middle are white, A top part petals - blue or Pink colour.If you use a little imagination, then such compositions will beautiful garlands flowers will perfectly decorate the interior for the holiday. Do-it-yourself chamomile from balloons To make a chamomile, you will need 2 white and green modeling balls, as well as a balloon pump.

First, let's start modeling the flower. To do this, inflate a white ball, leaving the tip 3-4 cm, and tie it in a knot. Next, you need to tie the beginning and end of the ball to make a ring. Then we bend it in half and twist it several times in the middle. We divide the ball into three parts of the same size and twist it in two places, then fold it into an accordion. Take the resulting “accordion” with a large and index fingers where the ball twisted, and scroll the remaining petals with the other hand. We got a chamomile! To make the stem, take a green modeling ball and inflate it, just not tightly, as the ball may burst while twisting. We retreat 10-15 centimeters from the end of the ball, bend and twist, during which the knot of the ball should be in the place of twisting. Insert the resulting stem into the middle of the chamomile. To make leaves, you need to take 10 cm in the middle of the stem and twist it several times, on the other side of the stem we repeat the same thing, now straighten the resulting leaves. How to make an iris flower from a ball? To do this, you will need 2 balls for modeling the ballet machine: green and purple (or pink).
Making an iris bud.

To do this, inflate the ShDM and leave 3-6 cm unfilled with air. Next, fold the ball in half so that the beginning and end coincide and tie it in a knot. We place the resulting knot in the center and twist the ball in this place several times. The result should be two loops of the same size. Then we fold the resulting loops together. We retreat 1/3 from the end of the loop and begin to twist the loops together. You should get an iris bud. In order to make a stem for the iris, we do not fully inflate the green ShDM, leaving a 5-centimeter tip. Fold the ball in half. We retreat 10 cm from the middle and twist it several times. One leaf should form. We do the second leaf of the stem in the same way, only be sure to fold one of the ends of the stem next to the first loop. We even out the resulting leaves well so that the stem does not seem crooked, and connect it to the bud. Our iris is ready!
Such easy ways You can cheer up your loved ones by making balloon flowers with your own hands. And when you have enough skills, you can make entire bouquets of balloons! Go for it!

Every hero of the occasion wants to make his event bright and memorable. To do this, you need to think through everything before the smallest details. We must not forget about decorating the hall. Decor with inflatable balloons is used to decorate wedding halls, to complement matinees and children's parties, for anniversaries and others. ceremonial events. Of course, decoration professionals will do everything to the highest standard, but you will have to pay a tidy sum for this service. In order to avoid such waste, you can learn how to make flowers from balloons with your own hands. Similar decoration It looks unusual and original, and is quite simple to make. However, many nuances must be taken into account.

Selection of working material

First you need to decide how many flowers there will be and what kind of balloon flowers you need. Calculate everything correctly so that there is no shortage of material. It's better to have some extra balls left.

Buy required amount material and hand pump. It is quite difficult to inflate such balloons with your mouth. In most cases, the set of balls already comes with an inflatable mechanism.

It is worth considering in detail several ways to make a flower from a sausage ball.

Making the stem

For the trunk of the future flower, it is better to take a green or light green color. Inflate the balloon using a pump, leaving the end about ten centimeters.

You need to twist your own balloon flowers with confident and quick movements, without fear that the inflatable material may burst.

Take the ball from the side of the knot and insert your finger into it about 5 centimeters. After this, pinch the knot located inside the material with your other hand and pull out your finger. Next, you need to make three twists so that the knot is clamped inside inflatable balloon. As a result, you will get a depression, which will subsequently become the core of the flower.

After this you need to make the petals. Otherwise, without them, flowers made from long balls will look dull and boring. Take another inflated “sausage” and fold it in half. This will mark the middle of the material. After this, you need to alternately connect one and the other ends of the ball with the marked middle. This manipulation must be performed in three twists.

Also, the petals of the stem can be made directly from the trunk itself. In this case, the flower will turn out with short leg. If you are making flowers for a bouquet, it is better to leave the stems long and not make petals on every stem.

Balloon flowers, master class: daisies

Perhaps the most in a simple way Making flower petals is precisely the method of using one “sausage”.

Take the ball and connect its ends by tying them together. After this, divide the material folded in half into three parts by eye and do a triple twist. Next, fold the resulting pieces in a zigzag pattern on top of each other and press tightly with your fingers.

In the places where the parts are twisted, make another twist so that you get six identical petals. Finally, place the resulting flower on the stem with the core.

How to make a flower from a sausage ball? Rose diagram

This method is less common, but no less effective. In this case, the flower made is very similar to a rose. For it you will need three balls: a pair for the bud and one for the corolla.

Take one inflatable “sausage”, fold it in half and secure the ends by twisting. After this, mark the middle and, folding it in half again, twist the resulting workpiece three times. As a result, you will get a bud of three petals.

Select a ball suitable color. It is better if it is the same as the stem. Fold it in half and connect the ends by tying them together. After that, select the middle and make three identical petals by twisting the midpoints of the segments together. Screw the protruding ends of the bud to the middle of the corolla.

Take another sausage of the same color as the bud. Twist the material into a loose knot and tie its ends together.

Before making a flower from a sausage ball, inflate the entire required material. Otherwise, you will spend more effort and time twisting and inflating the material at the same time.

Carry out twisting movements in only one direction (away from you or towards you), otherwise you may get confused and have to redo the whole work again.

Do not tighten the knots too tightly, otherwise the ball may simply burst.

All movements must be sharp and confident. When dividing the ball into parts, try to do it as symmetrically as possible, otherwise the resulting petals will be of different sizes.

Flowers collected in a bouquet look more impressive. To create it, you need to make several flowers and connect them using one “sausage”, twisting it around the stems.

Conclusion

Now you know how to make a flower from a sausage ball. Try both suggested options and choose the one you like best. Share the secrets of your craft with your friends and family, they will probably like your ideas.

Good luck in your creativity!

You, of course, have seen clowns and circus performers more than once who fold balloons into the most unimaginable shapes. So, this is called “twisting”. Now we will describe how to make a bouquet of special balloons using this technique.

For the bouquet we want to make, we will need several things, namely:

• 6 5-inch balls;
• 5 10-inch balls (or larger);
• 5 green balls and 6 multi-colored modeling balls;
• hand pump.

Have you stocked up on everything you need? Great!

Basic provisions

First, let's look at the basic provisions. These are iron rules that must be followed not only in our specific case, and in each case of working with balloons using this technique:

1. You cannot inflate the balloon all the way;
2. Twist (yes, we'll twist the ball) balloon in one direction only;
3. Start twisting from the “neck”.

The short course in twisting has been completed, let's proceed to the master class itself.

How to make a flower from balloons?

We start creating a bouquet with the flower itself. To do this, take a red balloon and inflate it almost completely so that about 3 cm at the end remain deflated. Tying a ball is not difficult: wrap the tip around your middle and index fingers, forming a loop, and pass the tip of the ball through it.

Take two balls and tie them double knot at the ends so that a ring is formed. Fold the ring in half and twist it twice in the fold area.

Take the folded ball, divide it into three, twist it in two places

Fold the ball into an accordion shape. We take the accordion that we have, grab it with one hand at the twisting point, and with the other hand we roll the ball in the center. Voila! We get a flower.

How to make a stem out of balloons?

This is the easiest stage. To make a regular stem, we need one green ball. Inflate it, leaving a couple of centimeters at the end uninflated. Let's make a knot.

We count about 10 cm from the knot with our eye, bend it, see at what level the knot is and twist the ball in that place so that the knot is hidden.

How to arrange a bouquet?

We will tell you two ways to turn individual flowers from balloons into a beautiful, complete bouquet.

Method 1: bouquet in a “ribbon”

We inflate the modeling balloon so that at the end there is 7 cm of uninflated space. “By eye” we measure 4-5 cm from the knot and twist it.
The tail with a knot is wound to the place of twisting.

To keep the tip out of the way under your hands, cut it off almost to the point of the knot. As a result, the ball turns into an airy “ribbon”.

To complement the composition, decorate the ribbon with a bow. We take a modeling ball and inflate it almost completely.

Make a large loop at a distance of approximately 30 cm from the knot.

Next we make a loop of the same size. The ends of the balloons should be the same length. We get a “bow”.

We connect the “ribbon” and the “bow”, beautifully bending the ends of the bow.

After all this, you can insert previously made “air flowers” ​​into the workpiece.

Method 2: Bouquet with stand

For this bouquet we will need regular balloon flowers, without twisted green leaves.

We take the flowers, level them in height, and tie them with thread.

We determine the height of the structure, determine where the stand will be, and tie the stems together in that place.

Do you want to surprise your guests and family at a holiday, but don’t know what you can come up with? This easy balloon flower tutorial will inspire you.

Balloon flower

To make a simple balloon flower, you need to prepare:

• long balls: yellow, red or pink (for petals) - 1 pc.;
• ball for stem and leaves - green or yellow color- 2 pcs.;
• pump for inflating balls with air.

Making a flower:

• First you need to inflate the balloons. For the petals you will need one long ball.
• You first need to inflate the pump completely, and then you need to slightly release the tip so that a small, uninflated “tail” (up to 7 cm long) remains at the end.
• The inflated ball takes the shape of a sausage; it should be soft to make it easier to work with.
• Connecting the ends inflated balloon, it turns out to be an oval.
• In the middle you need to divide the resulting figure and twist it twice. You should always twist in one direction only. For example, clockwise.
• We twist it once first, then measure the same distance and twist it a second time. There should be 3 equal parts - these are the future petals of the flower. Each part must be the same, otherwise the flower may be crooked.
• Now the most difficult part: you need to fold the resulting figure in a zigzag manner, turn 3 sausages on the right to the three on the left. You should now have petals. And at the place of twisting a tight ring-lock is formed.
• The petals are ready, now you need to make the stem and leaves. To do this, we again pump the yellow balloon with air from the pump, leaving the tip free (the same 7 cm), and tie the inflated balloon.
• And here it is little secret: carefully push the tip inside the inflated ball with your finger, intercepting it with the fingers of the other hand, twist it so that the tail does not jump out.
• Now you can connect the stem with a beautiful center with petals.
• Make leaves from the remaining ball. We inflate, twist in half, twist the figure in half again so that we get identical twisted segments on each side.
• Then you need to connect these segments together to form a petal: on one side and on the other side.
• You need to fold it slightly at an angle so that the leaves are the same.

The balloon flower is ready. Only 3 long balls are needed to make such beauty. And once you get the hang of it, you can make a whole bouquet of bright flowers out of balloons.

How to make a tulip from balloons

A tulip is made as simply as a chamomile, but you need to prepare the following materials:

• long balls: yellow and green, 1 pc.;
• pump.

How to make a tulip from balloons:

• Using a pump, inflate one yellow and one green balloon each. Just leave the tails free, length 7-9 cm.
• We divide the yellow ball into 5 parts, but for now we twist only 2 parts, the length of each is as long as your palm. We fasten the resulting figure into a loop, twisting it.
• We also measure out a segment of the same length and secure it again, screwing it to two petals.
• We slightly knead the remaining tip of the ball and make 2 more petals in the same way. There will be 5 petals in total.
• The result should be a figure of 5 petals and a small remainder of the inflated balloon.
• This remainder needs to be pushed into the middle of the ball; this will make the bud a little more voluminous.
• Screw the inflated green ball to the tip (you can use a knot).
• Twist 3 loops of the same size. They should be evenly distributed around the leg and just cover the junction of the balls.
• The tulip is ready. You can stop here or make a few more of the same beautiful flowers.

There are different bouquets, and they can consist of living plants, ordinary twigs and, of course, balloons. Regarding the latter, then in present time they are becoming increasingly popular. Judge for yourself: with their help you can decorate your home in an original way for any celebration or give them as an alternative to a real bouquet, both for a child and an adult. Of course, you won’t appear at the wedding with him, but congratulating your soulmate on Valentine’s Day is quite possible! And, naturally, such bouquets are a guarantee Have a good mood! But at the same time, decorating anything with them is quite difficult.

There are special companies that organize such celebrations, where we can order similar flowers for any purpose. But you must admit that the heroes of the occasion will value gifts made on their own much more highly. Therefore, we decided to tell you how to properly make flowers from balloons with your own hands.

Where to start?

Naturally, with planning. First, we need to decide which balls we will use. The thing is that today there are several technologies for making such bouquets. Let's look at them separately.

We make a bouquet of round balloons.

A fairly common manufacturing method and at the same time one of the simplest. Thanks to her, even children can make flowers from balloons with their own hands. But first, let's look at what we need in our work:

1. Threads.
2. One ball light color(possibly white or yellow).
3. Six - seven balls of a different color, but always the same.

So, let's get to work.

Stage one.

First we need to inflate those balloons that will serve as petals. The most the best option there will be six or seven balls - they will look very attractive. When inflating them, we must remember that the balls must be the same size. But first you need to inflate only two balls, which we will fasten together with tails or thread.

Stage two.

Having finished with the first pair, we inflate the next two balloons in the same way, also fastening them together. After this, you need to fold them diagonally with the previous pair and, again, tie them with thread. Thus, now we have on our hands a kind of blank consisting of four petals.

Stage three.

We proceed to the third pair and traditionally do everything according to the old scheme.

Stage four.

Now we take the yellow ball (remember, it is the core of the future flower): carefully inflate it too. But it should be remembered that its size should be slightly smaller than in the previous case. Then we insert it into the center between the petals. To do this, we simply pass it through one of the resulting pairs and carefully fasten everything by tying the junction of the petals with thread. If the future petal is intended to decorate the walls or, especially, the ceiling, it is to this ball that the ribbon should be attached.

So, your homemade flower from round balloons is ready! Let's see what else can be done.

We make a bouquet of long balloons.

As you might guess, make from a long balloon the flower is somewhat more complex than in the first case. But even this task can be handled by anyone. All we need is a couple long balls. One of them should be green because we will use it to make the flower stem. As for the second ball, it could be, for example, a chamomile. So let's get started.

Stage one.

We start working from the stem. To do this, we need to inflate the green ball so that there is still a small “tail” at the end of it. This will give the ball the necessary softness so that it simply does not burst during operation.

Stage two.

Then we need to fold the ball in half, step back ten centimeters from the fold and twist it several times. Thus, we already have the first leaf of our flower. After that, we fold one of its halves in half, twist its parts and voila - we have a second leaf! As a result, the stem should have formed the basis for the flower itself, a fairly long stem and a pair of leaves.

Stage three.

We can also make iris. To do this, we will need to inflate a blue or purple balloon, traditionally leaving a “tail” at the end that will not be filled with air. Next, we fold the ball in half and then fasten its ends with thread.

Stage four.

We have a knot that should be twisted several times in its center. Thus, we will get a pair of identical circles.

Stage five.

Add these circles together. You need to step back about 1/3 from one of the edges and twist its two halves there at the same time. So, we got iris.

Stage six.

Next we need to connect the bud to the stem. To do this, you can use a thread, or you can attach it using the “tail” of a green ball. Look: only ten minutes have passed, and we already have some pretty cute DIY balloon flowers! And if you make at least five of these flowers, you can make an original bouquet. For it we need a tape, which can be made from long ball, making a kind of bow out of it.

We attach it to the bouquet with a thread or the same ball with which we will tie our airy bouquet.