High-quality application of gel polish. Covering nails with gel polish with video and photos

IN Lately Gel nail polishes are becoming increasingly popular and allow you to achieve incredible results. Particularly attractive is the fact that they stay on the nails much longer than their regular counterparts. However, immediately people who have never used such a product have a completely logical question: how long does gel polish last on nails specifically? Is the result really so impressive that it would be worth spending money and time going through the rather difficult procedure of applying such a varnish? This is exactly what this article will discuss. You will learn not only how long gel polish lasts on your nails, but also how to apply it at home so that it stays on. perfect condition as long as possible. After all, if you approach the process of applying gel polish incorrectly, then in the end it may last significantly less time, which is unlikely to suit you.

How long does the varnish last?

So, first of all, it is necessary to answer the most main question: How long does gel polish last on nails? It's no secret that regular varnish is starting to lose its attractiveness. appearance within a couple of days after application, even if you cover it with a protective transparent layer. This is why you should try gel polish, as it lasts much longer. Naturally, a lot depends on the model of the varnish itself, as well as on the process of its application, but with all favorable conditions it should stay on the nails for two to three weeks, which is a lot compared to regular varnish. However, as mentioned above, such an impressive result requires a serious professional approach. But this does not mean that you cannot give yourself a similar manicure at home - you will just need to study all the details, stock up necessary materials and devices and get to work. Now that you know how long gel polish lasts on your nails, you can strive for the perfect result.

What is needed for a manicure?

It's time to figure out exactly how to use gel polish. How to apply such a product at home so that the resulting manicure lasts the promised three weeks? Unfortunately, this is not as simple as many would like. Regular varnish is very easy to apply - you just need to be careful. As for gel polish, here you will need a lot of additional equipment.

First of all, this is a nail grinder that will prepare your nail plates for applying gel polish. Secondly, you will need a degreaser - a special product that removes the fatty layer from the nail. An ultraviolet lamp will also be an indispensable device, which will allow you to dry the gel coating. Without it, you may not even spend money on gel polish because you won't be able to get a manicure. Please note that LED lamps are now becoming increasingly popular, as they dry much faster and last much longer, so you may want to consider this option. Naturally, you will need the gel polish itself, a gel base for it, and also a top coat - a special fixer. If you have all this available, then you are ready to use gel polish. How to apply at home? Now you will learn about this step by step.

Grinding

If you are going to apply gel polish to natural nails, then you need to start by sanding the nail plate. Use the special machine discussed above for this. Your goal is to slightly remove the gloss from the surface of the nail, so there is no need to sand the plate too much. This is not the most pleasant process, so you can try using more expensive gel polishes that do not require sanding, but this article describes how to get the most long-lasting manicure, and for this you will need sanding. Now you know how long gel polish lasts on nails - and how nails grow, you should also know and understand that over time it will not look the most impressive. So make an informed decision.

Degreasing

The next step is degreasing the surface of the nail plate. This process is simply necessary for the gel polish to last longer. This special substance must be used on the nail to remove absolutely all dirt and traces of fat that may interfere with your manicure. If on nail plate If any grease or any other contaminants remain, the gel polish can very quickly crack and fall off. Therefore, approach this procedure very carefully - after degreasing, try not to touch the nail with your fingers, and do not do any lengthy or labor-intensive tasks. It’s better to start applying gel polish right away. Many people ask about which brand of gel polish lasts better, but in this case the difference won't be too big. What matters most is the process of applying the nail polish, not the manufacturer.

The basis

So, you have degreased your polished nail - what to do next? Without delay, so that no foreign particles have time to get on the nail plate, use a gel base, onto which you will then apply gel polish. In this case, many make the mistake of believing that what more basics you apply, the better the varnish will adhere. Here, more does not mean better, so apply the base in a thin layer, without overdoing it and distributing the product evenly over the entire plate. After this, you need to dry the resulting layer in an ultraviolet or LED lamp before you move on to the next step.

Colored varnish

Now it's time to apply the main color layer - this needs to be done twice to obtain maximum saturation. Again, in this case, more does not mean better, so you need to make sure that both layers are as thin as possible, but not transparent, that is, so that the color is saturated. Again, you need to dry each layer in a lamp for a short period of time, which depends on the type of lamp you have and its power.

Top

The last step is to apply a setting agent called topcoat. It will provide your manicure with maximum protection, due to which it can last for three whole weeks. Moreover, it adds shine to your manicure, so don’t forget to use it. This is the only layer that needs to be applied really thickly - and it takes a little longer to dry under the lamp. After that you just need to delete sticky layer, which will remain after applying gel polish - and your long-lasting manicure is ready.

Going to the salon

As you can see, this is far from the simplest process, which will require serious one-time financial costs from you (for example, to purchase a special lamp), as well as repeated expenditures of time and effort. If you are not ready for this, then you can immediately contact a beauty salon that provides a similar service - and an experienced professional technician will apply gel polish to you so that it is guaranteed to last for at least three weeks.

In the process of learning to apply gel polish, certain mistakes are inevitably made that upset novice masters. Let's look at them in more detail so that your home experiments and creativity will only bring positive results and impressions!

Preparing nails for a manicure with gel polish: what you need to pay attention to. TOP 10 mistakes made by beginners.

Thorough and quality training nails will help the master quickly and correctly apply color coating, and also ensure good adhesion of the nail to subsequent layers of applied materials. Unfortunately, mistakes happen at this stage in the work as experienced craftsmen, and those who bought for the first time. What are the consequences of the shortcomings made when processing marigolds and applying materials for degreasing, cleansing, dehydration and improving adhesion?

• Mistake #1: The base for the gel polish went on smoothly.

Cause: you have not completely removed the old coating. You need to carefully file away all the layers of the previous design so that the new layer fits perfectly evenly on the nail and evens out all the grooves and depressions.

• Mistake #2: microbubbles and mini-voids are visible in the layer of the polymerized base.

Cause: During the unedged manicure process, you did not completely remove the cuticle, pterygium and eponychium. During the baking process, microgaps formed between the nail layer and the particles of skin remaining on the nail. When wearing such a design, detachments at the cuticle and cracks may form due to water getting under the base layer.

• Mistake #3: The color coating has peeled off the nail, starting with the base layer.

Cause: This is due to the fact that the master could skip the stage of removing the top keratin layer. Damn the nail, it’s important not to damage it. Do not apply significant force when pressing the tool on your nails and follow the correct direction of movement. Correctly buff from the cuticle to the free edge, with light movements.
The same picture is observed if . It will make the nail smooth instead of rough, and the coating on the nail will simply not stay on.

• Mistake #4: under the layer of gel polish, cracks formed in the nail plate, which led to the nail breaking.

Cause: The result of cracks and chips in the nail is the thinning of the natural nail due to too intense grinding. The other extreme - not treating the nail well enough with a buff - can result in peeling of the coating due to the peeling keratin scales not being completely removed by the master.

• Mistake #5: The gel polish peels off as a whole plate.

Cause: Pterygium particles remained unnoticed on the nail, and delaminations on the free edge were not removed. With subsequent regrowth and peeling of the pterygium from the keratin of the natural nail, the gel coating also comes off. The continued delamination of the natural nail in depth (under the gel polish) leads to detachments of the manicure already from the end.

• Mistake #6: shellac and gel polish chips a lot a few days after application.

Cause: this phenomenon can have three reasons at once - the periungual ridges and the surface of the nail are poor; the application stage was skipped; you touched the nail after degreasing and before removing stickiness from. How to solve this problem?

• Degrease the nail step by step: disinfect your nails and hands with spray or foam. Next, remove the fat from the nails, and finally treat the nails and side ridges;
• Don't skip applying acid-free primer. It is advisable to use a product from the same manufacturer as the gel polish base. This way you guarantee maximum adhesion between the base and the natural nail;
• Try not to let your fingers touch the treated nails. If such an incident occurs, re-treat the surface with a lint-free puff.

• Mistake #7: the coating cracks and breaks off in small pieces.

Cause: you may not have sufficiently cleaned the nail from dust (sawdust), dirt and sebum(the surface was poorly treated with a degreaser or a substitute containing oil was used instead).

• Mistake #8: In natural nails, even without blows, cracks formed right down to the flesh.

Cause: nails suffered from overdrying. You or the technician may have used inappropriate preparations (alcohol, acetone, solvent) for cleaning and degreasing. Their regular use without subsequent nail treatment leads to weakening, deep dehydration and thinning of natural nails.

• Mistake #9: when using the base directly on a dried primer (the quality of both products is good and the expiration date has not expired), after a few days your coating will still chip and peel off.

Cause: If you have gone through and excluded all other options, remember: do not remove the remaining degreaser from the nail with ordinary cotton pads. You can't do this. Discs are left invisible to the eye villi, which impair the application of coatings and lead to a loss of aesthetics of the manicure. Residual traces of oil or cream that have not been removed are also contraindicated for gel polish (they also need to be thoroughly “washed off” from the nails with a gentle degreaser). Also monitor the quality of degreasing. If you have applied the base, dried it and see bald spots, repeat the application of the base and be sure to seal the end of the nail.

• Mistake #10: your client has long but thin nails, the length of which you mutually decided not to remove.

Cause: Gel polish certainly shields nails from external negative influences, but cannot 100% eliminate the risk of cracks and chips. The coating maintains elasticity on the nail. And if the nail plate bends and breaks, the same will happen to the nail. Hence deep cracks nail and shellac itself. The way to eliminate the problem is to first strengthen the nails or correct the length.

The process of creating a design with shellac and gel polish. TOP 10 common mistakes and ways to eliminate them.

If you managed to carry out the process of preparing your nails for applying shellac, avoiding all the pitfalls, do not let your guard down! Creating an image and decorating it with design also has its own subtleties and interesting life hacks.

• Mistake #1: you carefully painted your nails with a thin layer, but after drying in the lamp you discovered polymerized streaks.

Cause: When you or the client placed your hand in the lamp, you could keep your fingers tilted throughout the drying process. Capricious or very liquid gel polishes in this case, they could flow into the side rollers and onto the cuticle. You can solve this problem by using gel polish remover, a lint-free cloth with a beveled edge. When you paint a nail, paint over the surface, avoiding the side ridges and cuticles, but also avoid gaps.

• Mistake #2: the new gel polish chips and cracks, although the design is covered with a thick topcoat.

Cause: this phenomenon may be due to the use of an expired topcoat, a conflict of coatings (color and topcoat), or the use of a finish of poor quality.

• Mistake #3: colored shellac was deformed after drying, bubbles and voids are visible in the coating. The gel polish has a good shelf life and was purchased from a reliable seller with a quality guarantee.

Cause: the coating was applied in too dense layers or did not dry for long enough in or. Remember: the main rule of manicure with durable polymer coatings is to apply thin layers, squeeze the excess from the brush onto the neck of the bottle, and follow the manufacturers' recommendations on the polymerization time of materials.
Another common reason is that you vigorously shook the bottle of gel polish before applying, which led to the formation of air bubbles in the thickness of the material. The right way lifting the color pigment from the bottom is by rolling a bubble from gel polishes between your palms.

• Mistake #4: your manicure chips and becomes cracked, although you know for sure that the gel polish is of high quality and is stored in compliance with all rules and sanitary requirements.

Cause: If the culprit is not shellac, turn your attention to your UV or LED lamp. If you have a completely new device, this may be the case. manufacturing defect. For a device that has been in use for a long time, it makes sense to check and replace them if the maximum service life has been exceeded.

• Mistake #5: when applying layers, you do not brush over free edge nail

Cause: The secret to the longevity of shellac manicure is the tightness of all layers. If you neglect to seal, any of the layers of base, color, or top coat may peel off due to exposure to water, housework, or careless handling of the manicure.

• Mistake #6: you love creating manicures by mixing colors and creating unique shades. However, despite all the tricks, the coverage lasts less than 14 days.

Cause: Poor wear may result from mixing colors from different brands, or using a base, top, color, primer and dehydrator from different manufacturers. It’s not for nothing that brands recommend a “family” approach to purchasing materials for gel polish manicure. The fact is that the formulas of all shellac manicure products are created in such a way that their components complement each other and provide maximum durability to the design.

• Mistake #7: your manicure shows record time socks, but decorative elements quickly chip, become cloudy or peel off.

Cause: The secret to high-quality fixation of decor is fixation with a second layer of topcoat, which beginners often do not do. For, especially large ones, it will be good to coat the gaps between the crystals with topcoat. And for or it is extremely important to comply with the drying time in the lamp. A thick multi-layer design should not be dried for less than 3 minutes on the final layer of topcoat. An excellent solution for the master would be such well-proven top coatings as and. Their thick, rich texture is specially designed for extra-strong fixation of decor and reliable protection manicure

• Mistake #8: you use in one design both completely new coatings and materials that have expired and are about to expire.

Cause: It is not advisable to use old gel polishes for manicures. From the time the bottle is opened, the texture of the product changes; shellac can be applied in thick layers. When they dry, air pockets are formed, leading to inevitable detachments.

• Mistake #9: you apply gel polish and shellac to nails that are just below zero length, and clients soon complain about chips and cracks.

Cause: Practitioners advise not to apply gel polish on nails that are too short. Either increase the minimum length by , or advise the client to come for a manicure as soon as at least a small free edge has grown. The fact is that contact of the edge of the nail with the pads of the fingers is fraught with transfer from them subcutaneous fat, traces of household chemicals and sweat. If the nails themselves do not wear shellac well, such contact with sweat and fat secretions will inevitably lead to detachments.

• Mistake #10: your client has little time for design, and you are in a hurry to create finished image without complying required amount layers, their drying time and the density of the applied materials.

Cause: a hastily created image will not please you with longevity. The nails should be painted slowly and carefully, lightly coating the ends on each layer. If you are working with a UV lamp, dry the layers for at least two minutes each. For greater durability (especially when problematic nails) the base and color should be applied in two layers each, and with voluminous and textured decor, re-coat the manicure and top coat.

How to properly handle gel polish nails immediately after creating a manicure: dos and don’ts.

Like lacquer design, manicure with shellac and gel polish requires care, care and attention. A high-quality, creative, complex design can cost the client a considerable amount of money, depending on the level of skill of the nail artist and his place of work. So how can you enjoy the image in its pristine beauty and not end up prematurely with broken nails, a cloudy finish, or an image with cracks and detachments?

After creating a gel polish look, you can and should do the following:

• Regular massage of the cuticle with liquid or cream or lotion. This is especially true for “under the cuticle” manicure. Neat and well-groomed periungual skin will help your hands look beautiful, neat and well-groomed. The slow growth rate of the cuticle and pterygium will also have a good effect on the durability of the design. Contrary to popular belief, care products will not adversely affect the durability of the coating after they have been completely dried in the lamp.
• Do housework in , including preparing food with foods that have a strong color pigment (beets, carrots, etc.). If you wear light shades of shellac coated with , you may one day experience clouding or the shade getting dirty. A lint-free cloth and alcohol will save the situation. Wipe your nails gently and enjoy their renewed beauty.

• You took off your manicure and are faced with the fact that your nails square shape did they begin to curl at the ends? If the problem is permanent and reappears after treatment, you will have to change the shape of the nails. However, never do this while wearing the design. By cutting or filing nails with shellac, you risk damaging your nails and taking a long time to restore them.
• Even for those with strong and fast-growing nails, many practicing masters advise allowing the nail plate to recover after 3-4 designs. Practice for several weeks, or. Strengthened, moisturized and nourished nails will again delight you with a high-quality shellac design, without peeling and nail breakage.

Along with positive aspects long-lasting manicure with gel polish, there are several significant prohibitions regarding this coating.

What absolutely cannot be done if you decide to dress your hands in gel polish for 2-3 weeks?

• Try to limit skin and nail contact without gloves with aggressive household chemicals, facial care containing acids, as well as hair dyes and products containing acetone. The components of these products can negatively affect the wear time of the manicure, as well as cause clouding of the shine or significantly change the color of the coating.
• Treat the coating with the utmost care. Do not use gel polish nails as an opener or screwdriver, toothpick or scraper. Remember, nails under shellac retain their elasticity and increased mechanical stress is harmful to them.
• Don't sunbathe for too long. The more intense Sun rays, the greater the risk of burnout bright colors gel polish.
• Do not try to correct the overgrown design yourself. This type of coating, unlike, does not imply spot correction. After 2 weeks, it is better to completely renew the manicure rather than tinting and sanding the overgrown area of ​​the nail.

How to properly apply gel polish on natural and artificial nails: technology, master classes and video training.

Step by step procedure A manicure with gel polish at home is not too complicated and only requires regular practice. We invite you to get acquainted with our library of educational articles and master classes that reveal all the subtleties and details of design with gel polishes: When starting to master gel polish, amateurs and inexperienced masters ask themselves the question: is the technology for performing manicures on natural and extended nails the same? We answer and share secrets.

What is the difference between performing a manicure with shellac on extended nails (acrylic, gel, tips).

In practice, the processes for creating an image on natural and artificial nails are quite similar. The main thing you DO NOT do with your nail extensions is:

• Do not use primer. High-quality degreasing and cleaning already guarantee strong adhesion of the base and acrylic or gel. Don't forget to buff your nails just a little.
• Apply gel polish to artificial nails only once, since it will not be possible to remove the design from them to the base. And you will inevitably have to make corrections.

• Create artificial nails as thin as possible so that the subsequently applied gel polish does not create the appearance of excessively thick and unsightly nails.
• Choose designs in colors close to natural color natural nails. So visually you can briefly, but delay the day of changing the image.
• Apply the coating in thin layers, pressing the brush to the nail. Unlike natural nails, correction of flaws on artificial nails is fraught with disruption of their adhesion to the surface of the natural nail. If you have little experience working with extended nails, it is better to entrust such a manicure to the hands of a professional.

We hope that now the bright, beautiful and alluring world of gel polishes and shellacs has become clearer and closer to you. Stylish and durable manicurists to you!

Modern nail polishes are super durable, but no matter how durable the polish is, it cannot resist household chemicals and prolonged contact of fingers with water. Therefore, the creators of nail polish products famous brands We have found an alternative to regular nail polishes - these are gel polishes.

Most girls worry that gel polish is difficult to apply and such a procedure can only be entrusted to specialists in the salon. However, they are wrong. Applying gel polish at home is quite possible and many girls are already doing this. Saving time and money in person! So today the site website will show how to apply gel polish yourself at home. Let's get started step by step instructions and advice.

To perform this procedure you must purchase:

• Base coat for nails;
• Gel polish of a certain color;
• Top coat. It is advisable that the base, color gel polish and top coat be from the same company;
• Lamp for drying gel polish. A UV lamp (ultraviolet) or LED lamp will do. .
• Degreaser. If there is none, then it can be replaced with nail polish remover without acetone or with regular alcohol;
• Primer (Ultrabond) acid-free. It is not necessary to use it, just a degreaser is enough. Extends the wear time of gel polish and improves the adhesion of the base to the nail. If your coating does not last as long as you would like, use an additional primer.
• Lint-free wipes(you can take a soft cloth). It is better not to use cotton pads, because the fibers from them stick to the nails and spoil the manicure;
• Manicure tools(a file for shaping nails, a sanding file or buff, a pusher or an orange stick;
• Nourishing cuticle oil. Apply at the end of a manicure to soften the skin around the nails and give the nails a well-groomed appearance.

Applying gel polish step by step

1 . First of all, you must treat your nails, that is, get a manicure. Give an even and uniform shape to your nails. Push back and remove the cuticle. If you are doing a nail bath, it is better to wait 1 hour before applying gel polish.

2 . Use a sanding file (bafik) to polish your nails so that the gel polish lies evenly on the nail plate. It also enhances the adhesion of the base to natural nail and extends the wear life of the coating. Bafik only removes the glossy shine from nails; you shouldn’t press too hard. Light movements over all surfaces of the nails, also do not forget about the end of the nail (free edge). After polishing, the nails should become matte.

3. Degreasing nails. To do this, apply degreaser/nail polish remover/alcohol solution to cotton pads and thoroughly wipe each nail until it squeaks. This step can be repeated 2 times. Also, to enhance the durability of the coating, it is used acid-free primer (Ultrabodn), applied in one layer. Now the nails are ready for applying the base.

4. Apply a thin layer of base on the nails. Do not rush, the gel polish does not dry in the air and gives you time to apply everything evenly and carefully. Typically, gel polish brushes are very convenient. Push a drop of base close to the cuticle, but make sure that the gel polish does not flow onto the skin. We also coat the end of the nail with a thin layer (seal it).

5. Dry your nails in a UV lamp (36 Watt) for 2 minutes or LED lamp for 30 seconds.. You need to be very careful with your nails coated with the base and not touch them to any surface. Avoid getting dust, debris and hairs on your nails. If all these precautions are taken into account, the color will fit perfectly on the nails. If varnish gets on the skin of your fingers, you need to carefully remove it. cotton swab soaked in nail polish remover.

Read also:

6. Apply colored gel polish to the dried base (be careful, it has a sticky layer!). The coating is applied in a thin layer. Don't worry if the gel polish is streaky and shows through. Typically, colored varnish is applied in 2-3 layers. But there are also colors that apply smoothly and tightly in 1 layer.

7. Dry the color layer in a lamp. If necessary, apply another layer of color and dry again in the lamp (2 minutes in ultraviolet and 30 seconds in the Ice lamp).

8. Apply top. This is a protective layer that gives amazing shine to your nails and also protects the color coating. Thanks to the topcoat, your nails will be for a long time maintain its beauty despite long-term contact with water, cleaning, cooking and other factors external influence. By the way, the top coat is not only glossy, but also matte (Matte top coat) and is used in nail design.

9. Top coating Apply in one layer and dry in a lamp.

10. After drying the top, you need to remove the sticky layer with a special solution. Moisten cotton pad in a degreaser/nail polish remover/alcohol solution and remove the top sticky layer of topcoat from each nail at a time. Voila! Your nails are shining with new colors!

While admiring the beauty of your nails, you shouldn’t forget about the skin of your hands. Therefore, after removing the sticky layer, you need to coat the cuticles of each nail with nourishing oil. Rub them into the skin around the nail using circular motions. Then, when the oil is completely absorbed, apply to the skin of your hands. nutritious cream And massage movements Rub it into each hand until completely absorbed.

With the advent of gel polish, without advertising and persuasion, the product immediately became in demand and popular. However, before deciding to test a new type of manicure, it is better to familiarize yourself with all the advantages, disadvantages and nuances of using a varnish coating.

What is necessary

Necessary materials and tools for application at home:

For preparatory work Files are mainly used:

• formative;
• polishing;
• grinding

Fat-free areas should not be touched with hands. If any remaining moisture is visible, it can be removed using a dehydrator.

Step-by-step application technology

After the preparatory work, gel polish is applied. Decorative cosmetic product the center and end side of the nail are filled.

Movements should be careful and purposeful (up/down). There is no need to go over the same place several times.

The base coat is sold complete with coloring agent or separately.

Used to create a conditionally ideal surface for adhesion to other components.

• The base is applied in a thin layer in one stroke, after which the hand is dried under the lamp for 1.5-5 minutes. The time is determined by the lamp power. It is recommended to dry one hand at a time.
• Colored gel polish must be applied to the nail plates in two layers. If you plan to use more light shade, one gel layer is enough. For ease of application and obtaining a uniform color, it is recommended to paint each individual nail, followed by drying for 3 minutes.
• The final coating is applied after the gel has completely dried in a thin layer using a special brush. Protective layer will prevent manicure from premature damage and become a good barrier against water, as well as lungs mechanical influences. It is convenient to repeat the technique of treating the nails one by one and then drying them under a lamp. After finishing work, you need to dry all your fingers together for a few minutes again.
• A cotton pad soaked in an alcohol-containing composition will help remove the top sticky layer of varnish.
• It is recommended to complete the manicure by treating the cuticles with a special oil with a softening effect and nourishing the skin of the hands with a good cream.

The entire procedure of applying gel polish lasts approximately 40 minutes. Upon completion, the manicure should be protected from moisture and mechanical influences for the first days, until the hardening process is finally completed. This doesn't mean you have to walk around with your hands up. You can do your usual work right away. The gel has hardened quite well under the lamp and will not be damaged when searching for keys in a purse or washing a cup under the tap. But prolonged contact with water or cleaning the house on the first day is undesirable.

Is it possible to do without a lamp?

There is an opinion that it is impossible to fix the gel without a UV lamp. This is partly true, because one of the existing types coatings actually form a solid structure only with the help of ultraviolet light. Craftswomen who have repeatedly attempted to apply the gel at home offer the option of drying it with a heating, healing blue lamp. However, its power is too low to affect the gel composition. If anyone managed to fix the varnish using this method, it probably took longer to dry and the result was not durable enough.

Gel polishes are divided into two types, which differ in composition and drying method. The photosensitive type requires the use of a special lamp. And the non-photosensitive group is similar in properties to conventional varnish, so some varieties can harden with the help of a flow cold water from the tap or a cool 10-minute bath. But there are also products that do not harden without a catalyst (cyanoacrylate monomer). The fixative has a liquid or creamy structure. Thanks to chemical composition the gel sets.

The marking on the packaging of the “No-light gel” varnish informs that special means are not provided for working with it. If there is no such sign, most likely, drying is allowed only using a UV lamp.

How long will it last

If all precautions are taken, the varnish can last for more than two weeks. presentable appearance, but after this period the product begins to attach more strongly to the nail plates. Therefore the gel in mandatory should be washed off 12-16 days after application. If you leave it for some more time, it will be difficult to remove without using it. aggressive means no longer possible. This can lead to damage to the nail structure.

For the first two days, the process of adhesion of the decorative product to the nail plates continues. It is recommended to avoid prolonged contact with water to complete the chemical reaction.

After several uses of gel polish, you should take a break for recovery and recovery. During this period, you need to use a light base with regular varnish.

How to remove

You can’t just take the varnish coating and tear it off, this will lead to destruction of the nail structure. Further delamination, excessive softness, and thinning will create many problems. Regular nail polish remover will not cope with this composition. If you cannot get to a specialist in a timely manner, you can remove the coating at home.

To do this you will need to prepare the necessary materials:

Take pieces of cotton wool, soak them in acetone liquid, apply them to the nail plates and wrap them in foil. After 10-15 minutes, you can try to remove the coating using an orange stick. If the procedure does not work, you should repeat the entire process again. When using a special liquid intended for, the duration of the procedure will be reduced to 5-7 minutes. Nails freed from product need polishing. A nail file designed for polishing will help you do this. After this, you can get a manicure.

The salon process is more gentle, as it uses special liquid the same manufacturer as the varnish.

Advantages and disadvantages

Advantages of gel polish:

• forms a beautiful shiny coating;
• adheres well to the nail plate, making it stronger;
• easy to apply;
• has no pungent odor;
• a wide palette of colors, allowing you to choose any shade;
• brightness is maintained for 2 weeks;
• prevents delamination and chipping;
• does not cause allergic reactions;
• The coating lasts firmly for at least 2 weeks.

Flaws:

• peculiarity of the coating removal procedure;
• participation in the process of creating a manicure using a UV lamp means visiting a salon or a master at home;
• the coating is subject to deformation under long-term exposure to water or during steaming, especially in the first day after application;
• thinning of the nail plates due to reusable gel polish

Hands real woman must look well-groomed, otherwise these are not hands, but Chuuya’s paws from Star Wars, and the owner herself neglected nails from a mystery girl she turns into a slob from work who is used to doing laundry with her hands and does not arouse any sexual interest.

Therefore, you should not be lazy and look for excuses for yourself, you need to learn to be beautiful and natural. For starters, you can at least paint your nails. The manicure procedure takes an hour at most, even using gel polish at home it will take two hours.

You can devote two hours a week or two to your nails, because they signal to the whole world about a woman’s attitude towards her beloved. But the world doesn’t need to know that a girl walks around at home disheveled, cooks only in the presence of a man and often forgets to wash off her makeup before going to bed - in short, that she doesn’t really love herself very much...

How to properly apply gel polish to your nails at home

What tools and supplies will we need?

Before starting the procedure, you should make sure that you have all the tools and accessories for manicure or that an equivalent replacement has been found. Which materials are definitely needed, and which can be neglected? To get a manicure, you need everything from this list (what’s missing can be put in, and what’s superfluous can be put aside):

If all the manicure products are ready, you can begin the application procedure itself. Below it is discussed step by step. The application sequence must not be violated.

Stages of the procedure step by step

Preparation

Before applying gel polish or first you should prepare your nails. You need to carefully clean them of the previous coating, trim the cuticles along the edges, adjust the free edge and be sure to disinfect the nail plate!

Disinfection is the prevention of fungal diseases under the varnish, since it removes fat, excess moisture and bacteria from the nail. Also, the disinfectant simply cleans the nail from dust and dirt so that the shellac adheres better.

Professional preparations that come in sets with gel polish can be used as disinfectants, but for manicure at home suitable conditions regular alcohol. Moreover, it is pure alcohol, and not vodka, not perfume or lotion! There are simply too many additional components in these products that prevent the varnish from fixing to the plates and can erase it. Plus, alcohol has a long period of activity and works even under shellac.

Before starting the procedure, you must once again make sure that the nail is cleaned of the previous varnish. To remove cuticles you must use special means or oil, but you should not steam your nails, as they may peel.

In fact, when preparing, you should do a regular soft hygienic manicure as a base, but do not immediately apply varnish. Moreover, you don’t have to shorten the nail too much; shellac usually strengthens the nail plate, but everything needs to be sanded, otherwise the gel base will lie unevenly. Polish the nails with a buff, holding it along the nail plate. Removing the top keratin layer of the nail helps the shellac to better adhere to the plate. You will have to remove it, although it seems that this causes great harm to the nail, but this is not so. Then the nail is degreased and a primer is applied.

As a little trick: the skin of your hands can be protected from harmful effects shellac by applying regular sunscreen or baby cream. Otherwise, the effect of ultraviolet radiation may dry it out ahead of time.

Applying base coat

A transparent shellac base is needed for better adhesion of the product to the nail plate. How weaker nails, the worse the varnish will adhere to them, so they are strengthened with a base layer. You can’t skimp on shellac base, even at home, because a bad base will ruin the entire manicure. The base shellac must be applied carefully and evenly to the nails in a thin layer and begin to dry in a UV lamp, then repeat the painting again, and apply the top coat immediately after the base.

Application of topcoat

The top coat of shellac is also called the topcoat because it seals the entire coating. It is done at the very end on fully prepared and treated nails. From correct coverage The brightness of the color and the neatness of the nails depend.

Immediately after application, you should use a dryer, and after two minutes, you should evenly lubricate the area around the nails with hand or lip balm so that the skin does not dry out or crack.

If you follow the classic concepts of gel polish, then nothing is glued or applied to the top. Exceptions may be large elements, for example, rhinestones, but if possible you should avoid this, since a manicure or pedicure will look untidy due to such sealing. This is one of the many secrets of manicure.

Final stage

After correct application top and dry in a UV lamp, blot your nails with a napkin containing liquid to remove the liquid. After this, the hands are lubricated with moisturizing cuticle cream and the shellac coating procedure is considered complete.

Differences between primer, bondex, and clinser from each other

Shellac terminology is full of unfamiliar words, the meaning of which a novice manicurist can only guess. At least some of them should be considered. Below is a step-by-step comparison of three key shellac products.

• Primer It is used to prepare the nail for adhesion, but it does not adhere anything, but only removes everything unnecessary on the plate. It can be compared to priming walls for wallpaper. It restores the pH of the nail plate, cleans everything so that the product adheres as correctly and firmly as possible. The degreasing primer does not require additional drying under an ultraviolet lamp.
• Bondex– a gel-like substance used to increase adhesion between the nail plate and shellac. Thanks to this product, nails do not peel off, but artificial material stays on the nail plate for as long as possible. Its action can be compared to double-sided tape, when it tightens both the nail and the shellac. Bondex should not be applied to the skin or cuticles; if the product gets on your fingers, they should be washed with running water. These two products (bondex and primer) are often confused.
• Klinser– aqueous-alcoholic solution with fragrances and oils. Removes the sticky layer at the very end of applying gel nail polish at home, a fixative, although it can replace the primer if necessary, since it is a good antiseptic.

These three are different manicure products A must-have for any woman who takes care of her nails and doesn’t try to mindlessly extend them. If possible, you should purchase them from the same brand, for example, Ingarden, Bluesky, to avoid chemical incompatibility and deterioration of adhesion. Proper care guarantees healthy nails and beautiful view shellac.

How to make designs on nails with gel polish?

Nail art is a type of manicure in which, in addition to the standard classical processing nails on them are also reproduced with various designs according to the method. Shellac quickly gives freedom to decor, which is why there are entire trends in nail design where images are applied to a ready-made coating. You can make absolutely unimaginable pictures on your nails, it all depends on the artist’s imagination, but you need to understand that individual bright patterns They will look more impressive on long nails, and their use on short nails is unacceptable. Examples are shown below.

Nail painting techniques.

There are many techniques for painting with gel polish professionally, but only a few of them can be used at home:

• painting technique with a thin brush;
• dotting technique (a special tool with a small ball at the end);
• technique spot manicure(reminds me a bit children's drawing by points with the described order);
• “wet” technique: the varnish moves freely on the nail plate using a toothpick or needle;
• liner manicure technique.

Before starting to use any of the techniques, you should observe the master and his manicure sequence. If you can't go to the salon, necessary advice You can learn from videos on manicure lessons on the Internet. But to gain experience, you still need to work and improve yourself.

Rose gel polish: step-by-step instructions

Rose gel polish is one of the most simple drawings, so can be played even by beginners. The entire procedure from scratch can be divided into several stages.

To begin with, you should select required colors. Most often chosen White color for the background and red and green for the flower, but this is not necessary. You can play with color scheme and choose something unusual. For example, on a matte natural beige tone, a glossy rose is slightly visible. Or paint your nail with black polish and make the rose itself from rhinestones. It all depends on personal preferences and clothing range. And colored matte manicure with a large abundance of small roses it looks very beautiful.
Then the nails are coated with the main color, and all at once, and not one by one, are dried in a UV lamp, this gives additional durability. The dryer allows you to seal the color for a long time.

When the varnish has dried, use the tip of a needle to make several dots on the nail with the colors you like and connect them to create the image of a rose.

Butterfly gel polish

Butterfly is a universal design, as it is suitable for both short and long hair. long nails. It looks most impressive on a classic french manicure or just white nails, when the wings of an insect contrast with the background.

You can draw a butterfly yourself using a liner or a brush, or you can simply buy a sticker and attach it to your nail. This won't work with a rose. And this is an undeniable advantage of the butterfly.

If you still want to make a drawing yourself, then it should be applied to a good ready-made base. First, the outline of the insect is drawn, and then the wings and body of the butterfly are filled with color. If desired, the drawing can be left as a contour. But learning how to apply color inside the outline is a must.

Skull shellac

Sometimes you want to step away from something cute and decorate your nails with something like a skull. The application technology will differ little from the same butterfly, this is also easy manicure, only the insides of the skull can be painted shiny varnish or rhinestones. Looks impressive! But the manicure ideas don't end there.

Hieroglyph shellac

Hieroglyphs are the easiest to draw because they only use two colors. Usually choose black and white varnishes, but you can try a combination of black and red, blue and white, or yellow and green. But the most important thing here is not to miss the meaning of the symbol. Hieroglyphs are in fashion, but you shouldn’t wear meaningless lines or descriptions of public toilets on your hands, this is one of the mistakes beginners make when designing nails.

Pirate theme

Using gel polish, you can cover your nails with the profile of Jack Sparrow, the outline of his Black Pearl and the pirate's helm. Of course, such a design will take a lot of time, but the end result will be a stylish, unique design, and not a typical nail painting!

Shellac letters

You can also write your name on the manicure. Conveniently, if your name is Alexandra or Constance, you get one letter per finger. Others will have to come up with the arrangement of letters from the first and last names of relatives and children, but these are the subtleties of nail coating. In general, gel polish at home gives a huge flight of fancy if you remember the rules of application! The main mistakes in application: it is better to use the alphabet that has the most letters in the name. The Latin or Cyrillic alphabet is chosen according to your own preferences, otherwise you will want to quickly wash everything off later.

French gel polish: step-by-step photo guide

It is better to consider this manicure technology and the next one using the example of drawings; better training in coatings is given there. Because they are no different from regular manicure at home, simply done using gel polish.

Ombre gel polish step by step at home

Method gradient manicure Ombre looks simple in pictures, but you shouldn’t start it as a self-taught person without practicing on other options, for example, roses. Ombre manicure is typical smooth transition from bright and shiny to a matte pale shade of the same color, but only a professional can accurately draw all stages of the coating.

And some more facts about shellac.

1. Shellac is a resin secreted by certain insects in Asia. Then this resin is bought and used as a key component of gel polish. None of the mechanical devices make shellac.
2. Gel polish promotes the growth of your natural nails; if desired, you can grow them under such a shell.
3. Thanks to a special coating technology, shellac protects the plates from scratches and traumatic damage.

This product has natural base, and therefore harmless to the body and has nothing to do with destructive extended nails. With shellac, constant nail correction is not required.