home › Prayers › Do-it-yourself corrugated paper Christmas tree step by step. New Year's beauty from colored paper and cardboard

Do-it-yourself corrugated paper Christmas tree step by step. New Year's beauty from colored paper and cardboard

The first frosts came and people began to think about New Year. This family holiday loved by adults and children. Parents remember that they were once small. Children these days live in anticipation of gifts from Santa Claus. In holiday chores, to decorate your home in an original way or make a gift for dear person, you need to find time to jointly make a gift with your child. This will be a voluminous Christmas tree corrugated paper.

Master class "Snow Forest Beauty"

What you need to make a Christmas snow tree:

tricolor corrugated paper is lilac, white, light lilac;
scissors;
wooden stick for barbecue;
white and blue threads;
stapler;
ruler not shorter than 25 cm;
vase;
filler in a vase.

Progress:

1. We make two identical rectangles.

2. We fold the rectangle with an accordion.

3. Remove the corners.

4. We connect the edges, find the middle and fold in half.

5. Using a stapler, fix the middle.

6. Do the same with the second rectangle.

7. Using a stapler, we connect the workpieces along the edges.

8. We fix the middle of the blanks with a thread.

9. There are 12 such blanks, these are four of each color. The largest is 25cm and the smallest is 4cm.

10. Fill the vase with red beans, cereals, colored pebbles. Here, the main thing is to fix the barbecue stick well.

11. We string the largest lilac blank.

13. The next blank is snowy.

15. A voluminous corrugated paper Christmas tree is ready.

The final version looks like a fabulous snow beauty that will complement holiday decoration home or will creative gift for the people you love. It will take a little time to make, the main thing here is a productive result - this is a three-dimensional Christmas tree made of corrugated paper.

Master class "Green Beauty"

A do-it-yourself voluminous Christmas tree made of corrugated paper will delight people if its base is made correctly. To do this, you need to make a cone from whatman paper. This material is dense, holds its shape well, and is easy to glue. It will be convenient for the child to work with him.

What you need to make a green Christmas tree:

landscape sheet or whatman paper;
stapler;
corrugated, green paper;
PVA glue or paper;
scissors.

Manufacturing progress:

1. To make a Christmas tree trunk, we fold, according to the bag method, a cone. We glue or fasten with a stapler. If the base is not even, then trim with scissors.

3. If the width of the cut strip is 6 cm, then we apply glue in a circle on the base from the bottom at the same distance. We pay attention to the trunk, it should not be visible. We glue a strip of green paper to the trunk and immediately make folds. The more there are in number, the more magnificent the tree will come out.

4. Using this method, we glue the entire Christmas tree to the top. There are two ways to perform this operation: stick a strip in a spiral or in rows.

5. Volumetric Christmas tree made of corrugated paper is ready. It only remains to add additional volume. To do this, carefully stretch the edges of the paper along the entire length.

6. It turns out a real forest beauty. In addition, we will add a decor in the form of stars.

When decorating a Christmas tree, you can show your imagination, use small balls, rain, sparkles, light garlands.

Other tree options

Idea number 1. New Year's beauty.

For manufacturing you will need:

whatman;
stationery glue or PVA;
corrugated paper of the color that the tree will be;
scissors;
stapler.

Progress:

1. We make a conical base of the future Christmas tree from whatman paper.

2. We cut strips 3 cm wide and 10 cm long, fold them in half and turn them a couple of times at the fold. So it turns out a blank for the Christmas tree. Their number depends on the size of the tree.

3. We take blanks, spread the straight double edge with glue and glue it on the whip so that the cone does not shine through.

The result is a corrugated paper tree that is voluminous and beautiful.

Idea number 2. Snow tree.

To complete you will need:

whatman;
white corrugated paper;
scissors;
sewing machine;
glue.

Progress:

1. We make a base for a fake from a sheet of drawing paper - a cone.

2. We cut the corrugation into strips 6 cm wide, sew it on a typewriter with large stitches or a needle and thread. After we collect, we make it look like a ruffle.

You can make a creative and unusual Christmas tree from colored, double-sided paper with patterns.

What is required for this:

special paper;
scissors;
stick from a sushi set;
stapler;
glue;
piece of foam.

Progress:

1. Blanks for our elegant Christmas tree are made in the same way as described above: snowy, forest beauty. There is no need to register a second time.

2. Let's dwell on the implementation of the frame for it. We take a stick from a set for sushi and a piece of foam. The foam should be about 1 cm thick and made in the form of a 10 x 10 cm square. We install a wooden stick in the middle of the base.

3. We string blanks onto the finished frame, starting with large ones and ending with small ones. If it is visible top part sticks mask it with an asterisk or a snowflake.

Volumetric Christmas trees made of corrugated paper will decorate the house and cheer you up, and most importantly, when making, you will get even closer to your children.

The creation of a festive atmosphere is facilitated by decorating the room with various New Year's crafts from simple and available materials. A do-it-yourself corrugated paper Christmas tree is a great activity for children, as well as an original new year gift. Today, with the help of our master classes, we will learn how to make Christmas tree crafts from corrugated paper. It is better to create with the whole family. So let's get started!

Corrugated paper Christmas tree: a master class with a photo

Let's make a Christmas tree of a "traditional" green color. To start, let's prepare necessary materials and tools.

Necessary materials:

green paper
cardboard sheet - A4 format
beads, rhinestones and tulle
needle with thin line
PVA glue
scissors
scotch
pencil

Step-by-step instruction

How else can you make needles? Corrugated paper is tightly wound around a pencil, which is then removed. At one end of such a "roll" we glue the "twig" to the cone. Comes out very fluffy. Christmas tree.

To complete the composition, you can decorate the Christmas tree with beads, stars, paper snowflakes, pieces of tulle and bows. At the same time, it is important to adhere to the measure - after all, our green tree is already beautiful in itself.

How to make a Christmas tree from corrugated paper: a master class with a photo

Options for creating paper New Year's crafts there are many. At this point, fantasy will tell you - just choose! Let's make a pale lilac Christmas tree, and use beads and sequins as decorations.

In the photo - a finished Christmas tree made of corrugated paper:

We stock up on materials and tools:

corrugated paper
cardboard
scissors
thread with a needle
thermal gun
decorative elements - beads and sequins

Step by step guide to action

Corrugated paper Christmas tree: a master class with a photo

A fluffy volumetric Christmas tree made of corrugated paper is obtained using a completely simple technology. This tree is perfect for decorating your home or workplace in the office. And if you add a bright scarlet bow and gold or silver strings of beads to the composition, then a real exclusive jewelry will come out.

Consumables and necessary tools:

cardboard - A4 format
green corrugated paper
scissors
pencil
beads and bow

Step-by-step instruction:

On the picture - different variants wonderful paper Christmas trees:

Do-it-yourself Christmas tree craft made of corrugated paper, video

Unusual handmade jewelry always attracts attention. Here you can dream up from the heart - the Christmas tree can be of any color and design. This video shows in detail the process of creating a Christmas tree from corrugated paper. Good luck with your crafts!

Corrugated paper is often used by crafters for crafts. That's Christmas tree can be done different ways using this material. With this craft, you can decorate the room of a kindergarten group, school class, put a small voluminous Christmas tree on your desk in the office.

How to make a crepe paper Christmas tree different methods, we will consider further in the article. Let's start with simple option postcards, then you will learn how to create voluminous crafts on cardboard cone. To work, you will need corrugated paper of any shade of green, PVA glue or glue gun for voluminous crafts, cardboard for the base and additional decorations - beads, plastic balls, stars, tinsel or a garland of small elements.

original postcard

In the manufacture greeting card for the New Year, the image of a forest beauty decorated with Christmas tree decorations is often used. Children 5 years old will already be able to do such a craft after an explanation from parents or educators in kindergarten. It is better to choose cardboard as the basis for the background. contrasting color, for example red, as in the sample in the photo below. Making a Christmas tree out of corrugated paper with your own hands is easy in a few steps.

Cut equal width strips of corrugated green paper.
Divide them into 5 segments different lengths. For the lower branches, you will need the longest segment. Then, as you approach the top, the segments are reduced by 2 cm. The upper strip should be only 4 cm.
Before gluing, each strip of corrugated paper is crushed with fingers from above. The folds are formed at an equal distance from each other.
PVA glue is used to attach parts to a cardboard base. Gluing is done from the bottom up. You need to spread only the part of the strip crumpled with folds. The lower frill hangs freely, creating additional volume to the image.

How to make a Christmas tree from corrugated paper in stages, you already understood, it remains to decorate it in an original way. To the top is traditional for new year holiday a golden plastic star is attached. As Christmas decorations you can use small pom-poms, small beads, buttons. Looks good light plastic garland, but you need a glue gun to attach it.

Christmas trees on a cone

Before you make a Christmas tree out of corrugated paper, you need to roll a cone from a sheet of whatman paper. Its edges are easy to connect with a stapler. As you can see in the photo below, the original voluminous Christmas trees can be made from strips completely different colors. It can be monophonic or multi-colored. You can decorate the craft along the entire height of the figure or decorate only the top.

Work on the craft begins with cutting pieces of corrugated paper of the same width. How to make folds is described in previous section, we will not repeat. They are glued in a circle, each next element is attached a few centimeters higher. Work starts from the bottom up. When the entire surface of the cone is pasted over, you can start decorating. You can use any technique, adding flowers from satin ribbons, simple bows from thin strips of fabric. To a thick cardboard base it is easy to sew even small Christmas balls from plastic.

Fluffy Christmas tree

It is not easy to make a Christmas tree craft from corrugated paper using this method. The work ahead is laborious, but the New Year's beauty turns out to be fluffy and spectacular.

First you need to roll a cone from a sheet of drawing paper and fasten its edges with paper clips or glue. Next to come preliminary preparation small squares cut out of green corrugated paper. It is more convenient to attach parts to the base with a pencil, turning it with a blunt, not sharpened side to the paper.

A paper square is held in the palm of your hand and a pencil is placed in the middle. The workpiece is crushed from all sides so that the paper "hugs" the rod. On the back side, the central circle is smeared with a glue stick or a drop of PVA is placed and immediately placed tightly against the cardboard base. The next "thorn" is attached very close to the previous one. Thus, you need to process the entire cone. If you attach the elements close to each other, then the cardboard will not be visible at all. Now you know how to make a corrugated paper Christmas tree to make it lush. The work is long, but the effect is amazing.

Craft for sweet tooth

Why for the sweet tooth? Because delicious ones are attached to the Christmas tree chocolate candies conical shape in foil. This is the most best option wrappers for decoration christmas tree, but if you wish, you can pick up other wrappers, even multi-colored ones.

How to make a crepe paper Christmas tree so that it can be installed in flower pot. Read on for a master class on making such crafts. We will create a Christmas tree according to the principle of a topiary. You will need a cone-shaped foam base, a center stick or cardboard sleeve, acting as a trunk, a flower pot for installing crafts in a vertical position and, of course, corrugated paper in three colors: dark and light green, bright yellow.

Manufacturing of small items

Fluffy twigs can be made in two ways - using the quilling technique and simple folding cut out circles in a bunch. Consider how to make a Christmas tree out of corrugated paper using the paper twisting technique. We will create each detail from strips of corrugated paper cut out of the same thickness. One side of the strip is cut with "noodles", but not to the very end. Leave a strip at the bottom for winding the workpiece into a tight coil. The end of the strip is glued to the last turn with PVA glue. All the completed elements are attached to the foam cone by spreading glue on the end part of the workpiece. Place them close to each other, combining colors.

The second way to make a voluminous Christmas tree from corrugated paper is to fold fluffy branches from several cut-out circles folded into a bundle. At the central point, they are attached to each other with glue. For the arrangement of sweets from yellow paper you need to cut out only 2 or 3 circles. The rest of the space will be occupied by candy.

How to strengthen the craft

Topiary necessarily has a core. It might be simple wooden stick, a smooth tree branch or a sleeve from paper kitchen napkins. They stick it deep into the foam, and lower part fixed in a flower pot in different ways. You can mix gypsum powder with water and pour the mixture into a container. The stick also holds well in a pot covered with stones and sand or stuffed tightly with pieces of foam. So that the surface of the filler is not visible, it is filled with paper, sisal or covered with a cloth.

How to make Christmas tree branches

From corrugated paper, you can make such a Christmas tree, as in the photo below in the article.

Branches are created by winding strips of corrugated paper on wooden skewers. Each element is prepared as follows: first, a strip of "noodles" is cut, then each "needle" is twisted with fingers into thin thread.

It remains just to wind the strip on a skewer in a spiral - and the branch is ready! Holes for skewers are drilled in the trunk and filled with prepared branches.

Creative success in work!

We will try to find the answer to this question together with you.

To make a Christmas tree you need:

Corrugated cardboard strips;

PVA glue;

Sheet office paper(A4);

Decorations for the Christmas tree.

Step by step process of making a Christmas tree

1. We start with the manufacture of the barrel.

To do this, take a sheet of A4 paper of any color (we took green)

We fold the sheet with a bag and coat with PVA glue along the side of the fold.

Cut off the excess from the bottom with scissors.

2. We begin to make branches for the Christmas tree.

Cut into 6 cm strips.

We glue the trunk in a circle (circles 5-6)

Each segment is sharpened on one side.

After the branches are well glued, you need to fluff them.

We glue the trunk in a circle about 2/3 of the trunk.

Each segment is sharpened on one side.

We continue to glue the trunk with them.

We finish gluing the trunk with strips 3 cm long.

Above to the crown, we cut the branches and on the other hand, so that it is more convenient to stick.

We glue such branches to the end of the crown.

Glue a star to the crown.

Scraps (small triangles) are glued like needles.

3. You can stop here and start decorating.

But we will make another barrel stand.

We take strips of green and brown corrugated cardboard. We have a strip length of 50 cm and a width of 1 cm.

We twist from one brown stripes frustum.

To do this, first we twist a tight roll from the strip (we coat the strip with glue).

Then we put forward the disk and form a truncated cone out of it, we coat it well inside with PVA glue. Let the glue dry.

We also twist the disk from another brown strip, constantly smearing the strip with glue. We glue a green strip of corrugated cardboard on top, so that the resulting disk enters the inside of the cone (tree trunk)

After the glue dries, glue the disk and cone together.

Glue into the stem.

4. We begin to decorate the Christmas tree.

To do this, you can use sequins, small balls, snowflakes and other decorations.

There is very little left before the New Year! Therefore, our lesson will be devoted to the creation of the main New Year's attribute - Christmas trees !!! Let it be small, but with positive energy. And if children are involved in the process, then good mood and bright memories will be provided to everyone for the whole year.

The materials are the most simple and affordable: corrugated paper, cardboard, beads, satin ribbons, PVA glue (for children's creativity) or hot glue gun (for adults).

The base will be a cone, it can be either made of cardboard (for children's creativity) or foam.

So let's start creating corrugated paper tree. Consider 3 various options based on a cone.

fluffy voluminous Christmas tree from corrugated paper it turns out quite simple in technology.

Option 1: tree made of corrugated paper petals

1. Cut strips of corrugated paper desired shade colors measuring 2.5-3 cm x 10 cm along the shirring lines.

2. Twist the strip in the middle. Let's fold it in half. Make the “petal” blank convex by stretching both layers of paper in the middle of the petal.

3. Glue the workpieces onto the cone in rows from bottom to top. Each next row should cover the previous one by at least half. "Petals" should be bent outward. Each next row is glued in a checkerboard pattern.

The base of the cone, if necessary, can be closed with a circle of the desired diameter from corrugated paper.

Christmas tree is ready! It can be decorated as you wish.

Option 2: Christmas tree made of corrugated paper "flounces"

For such a Christmas tree, you will additionally need: a thread and a needle.

1. If necessary, close the base of the cone (if the base is a foam cone).

2. From corrugated paper we cut long strips 3-4 cm wide and collect them on a thread.

3. Glue the assembled tape to the cone in a spiral, starting from the bottom.

4. Curved crown can be made with 3mm diameter craft wire. Wrap the top of the paper in a spiral and bend.

5. We glue decorations on the "flounces". And decorate the top with a large bead and ribbons.

"Flounces" can be glued both in a spiral and in rows, alternating colors.

Option 3: Christmas tree made of corrugated paper by trimming

For this version of the Christmas tree, it is more convenient to use a cardboard cone. You will also need a pencil or an empty pen case. With PVA glue, it is better to use a pen case or a pencil light shade colors so as not to stain the paper.

1. The paper must first be cut into strips 3 cm wide, and then each strip cut into 3x3 cm squares.

2. Take one square on forefinger left hand. AT right hand you have a pencil. Place the blunt part of the pencil in the middle of the paper and scroll the workpiece, pressing it with your fingers, as if wrapping a pencil around a paper square.

3. Let's start "cutting" our Christmas tree. We dip each “flower” into the glue and put it on the surface of the cone, pressing lightly, remove the rod. I will glue in a spiral, so I immediately outlined the markings on the cone.