home › Fashion and beauty › Marble pattern. Marble manicure with gel polish: marble nails, stone nails

Marble pattern. Marble manicure with gel polish: marble nails, stone nails

The effect of marble on the nails looks very unusual and beautiful. And it is not at all necessary to pay a lot of money for this service in a beauty salon. If you have a great desire and a little patience, then in this article we will tell you how to make a marble manicure at home.

Marble on the nails is a kind of divorce of colors smoothly turning into each other. The main thing is to choose the right shades that will be in harmony with each other, and not overwhelm.

The most popular colors are blue, pink, green, intersecting with white. Also, different tones of the same color, smoothly turning into one another, imitate precious stones: mixing blue and blue on the nail plate, we get beautiful turquoise, and different shades of green imitate malachite stone; yellow-gold shades are very reminiscent of mica.

It is believed that there are only three ways to apply marble on nails. But there are actually four of them:

The water method is the most popular and widespread;
The use of food film;
Drawing marble is the most difficult;
Finished nail polish with marble effect - what could be easier.

Consider in detail each of these methods to choose the best for yourself.

water way

Based on the name, for such a manicure you will need water. It will be better at room temperature. But you also need to stock up on the following tools:

Disposable plastic cup;
Primer, base and top coat;
At least 2 gel polishes of different colors or shades;
Toothpicks or wooden skewers to simulate stains;
Dryer (UV or LED lamp).

Previously, as before any application of varnish, the nail is prepared: shaped, removed cuticle, polished. The base coat is applied first. The magic happens next:

Drop the first varnish into a glass of water;
In the middle of the blurry varnish, drop the second shade;
With a toothpick, draw various patterns - circles, lines, zigzags;
Lower the nail to the resulting varnish pattern, holding it parallel so that the varnish evenly sits on the nail plate;
Excess varnish is removed from the nail with a clean toothpick;
Using a cotton swab and a degreaser, remove the remaining varnish from the skin around the nail.

The procedure is not complicated, but it requires a rather serious time investment. For each nail, you need to create a separate marble pattern. It is also necessary to dry each nail in turn, not forgetting to remove the sticky layer and apply a top coat. But the effect is worth it! If something didn’t work out for you, then the reason may be in stale varnish, too hot (or cold) water. It happens that gel polishes from different manufacturers are not too “friendly” with each other.

Cling film method

For beginners, this method of application will seem simple, you will need all the same tools as for water, but instead of a glass of water, cling film or cellophane. Step by step it will look like this:

Nails are processed as standard;
Primer is applied, then base coat;
The nail plate is covered with a plain varnish (it is better to choose a dark color);
Before all layers are dried and ready for the next step, prepare varnishes of other colors (no more than three or four);
On the nail plate, drop prepared varnishes one drop at a time (do not pour anymore, otherwise the nail will “drown” in such an amount of varnish);
We apply the film to the nail and move it a little so that the varnish under it seems to blur. The second way is to apply crumpled cellophane to the nail with printing movements several times;
dry;
Cover with finish.

Each nail must be treated and dried separately.

You can also create a marble pattern on the cellophane itself by mixing several colors with a toothpick, and then transfer the pattern to the nail, removing the excess with nail polish remover.

Drawing method

most popular in salons. The master paints marble on the nails with a thin manicure brush, using several lacquer colors. But such a manicure can also be done at home, armed with a toothpick.

A base is applied to the nail pre-treated for manicure;
The second layer is applied the main color, preferably dark. It must dry;
A third layer of the same color is applied, but it is not allowed to dry;
A few drops of varnishes of different colors are dripped onto a fresh third layer;
With a brush or a toothpick, they are given stains, smooth lines resembling a marble pattern;
After the varnish dries, the finish is applied.

Marble effect lacquer

On sale there are also varnishes with a ready-made marble effect, inside which there are already several colors that do not mix with each other. It is very convenient to use them, because the desired effect is achieved instantly, the first time. Yes, and you can save on the purchase of several varnishes of different colors.

The main thing is that the products should be of high quality, of medium consistency, so that they do not spread over the nail plate and do not lie down in a lump. There is no need to rush with an independent manicure, accuracy and accuracy are the key to a high-quality result, indistinguishable from a manicure made by a master in a beauty salon. And photos and videos will help you realize your own ideas.

Video on the topic of the article.

"Marble" manicure is a rather fashionable and at the same time simple design that even a novice nail art master can do. In our article, we will talk about the features of this technique, find out what tools you may need in your work and how to draw an imitation of natural stone on your nails.

Peculiarities

"Marble" manicure is a divorce of thin lines of several shades, smoothly replacing each other. The beauty of this manicure is that it is almost impossible to get the same design, so your nails will always be individual. The classic version is a white background and gray-black streaks.

But many masters are not limited to these colors, but recreate on the nails an imitation of turquoise, quartz, malachite and other natural minerals that have a similar pattern. All these options also refer to the "marble" design.

What will be needed?

In order to create a "marble" manicure, you will need a standard set of materials and tools.

Degreaser- This is a special liquid that allows you to remove excess sebum that has fallen on the nail plate. To reduce the cost of manicure, many people replace this product with 90% alcohol.
primer- the so-called primer, which prepares the nail for applying gel polish.
Base- this tool helps not only to level the nail plate before applying the color coating, but also strengthens it and prevents the pigment from transferring to the nail.

A set of matching color gel polishes- the choice of colors can be absolutely any, as well as their hiding power. It all depends on what effect you want to get. So, with the help of translucent jelly varnishes, you can get, for example, an imitation of quartz with visible veins in the thickness. You can draw sparkling mica with gold and silver stripes, etc.
Finish- this tool will allow you to fix the manicure so that it pleases you with its original appearance for a long time. Here the top can be chosen both with a sticky layer and without it.

Lint-free wipes- they will help to use a degreaser, while they will not leave unnecessary hairs and villi on the nails, as ordinary cotton pads do.
Fine brush for painting. Sometimes dots (metal sticks with a small ball at the end) or simple toothpicks are used for drawing.
orange stick- a tool that will help you remove excess gel polish from the cuticle.

You may also need a piece of plastic wrap, a bowl of water, regular nail polish, and Skin Defender (a rubber-based product to protect the skin around the nail from painting).

How to draw?

There are several types of techniques with which you can make a "marble" manicure with gel polish. Consider step by step how to depict marble on nails.

water way

This is a fairly simple option, consisting of several stages.

First, do a manicure, carefully remove the cuticle and pterygium.
Degrease the nail plate.
Apply primer and base coat. Do not forget to cover the end of the nail, then your manicure will last a long time and you will avoid peeling. Dry in a lamp.
Apply the base color coat to the entire nail. Dry again. If your color gel polish requires multiple coats, perfect the finish.
Next, you need to remove the sticky layer from the color coating and apply Skin Defender to the skin around the nail.

Pour clean water into a bowl. Its temperature should be around 25 degrees. Drop into the liquid those colors of ordinary nail polish with which you plan to apply streaks. Use a toothpick or orange stick to create a "marble" pattern in the bowl.
Alternately lower your fingers into the water so that the nail plate lies horizontally on the drawing. At the same time, with an orange stick, without removing your finger from the liquid, remove excess varnish.
Gently use tweezers or an orange stick to detach the design on the nail and on the skin around it.
Remove the Skin Defender layer. Remove excess nail polish from fingers with nail polish remover.
Leave the drawing to dry completely for 5-10 minutes.
Decorate your nails with a top coat, not forgetting the ends. Dry in a lamp.

With polyethylene film

This method also does not cause problems with the reproduction of veins.

First, we repeat step by step from the first to the fifth points from the previous method.
Then we take colored gel polish and put the drops in a chaotic manner. For example, we use white and black.
We crush a piece of polyethylene and press the drops so that they spread over the entire nail plate.
We remove the film, remove the protective coating from the skin. Dry the shellac.
We apply the final layer.

Another way polyethylene can be used is to draw a pattern on the film. For this, drops of gel polish are applied not to the nail, but to polyethylene. They are mixed with a sewing needle or a toothpick so that the pattern resembles the veins of marble. Then, using a brush dipped in a degreaser, the stains are transferred to the nail plate. After that, the drawing is dried and fixed with a top.

Drawing veins with a brush

This is the most laborious way but the manicure is more accurate and realistic.

Initially, it is also necessary to repeat the first four points, which are described in the water method of applying a "marble" manicure.
At the next stage, we apply a layer of top on the nail, do not dry it. You can also use the base for spreading.
Next, you need to mix the so-called tone of nylon tights on the palette. To do this, add a drop of topcoat to the gel polish with which you will reproduce the veins. We also put a drop of the brightest shellac on the palette.
Now, using a brush, you need to apply a pattern of "marble" on the nails.

If you have a poor idea of the location of the veins on a natural stone, it is recommended to use a pre-prepared photograph of a natural mineral. This will make it easier to apply the design.

First, using a translucent tone, we apply underpainting - light, thicker lines. We apply them with a thin brush, the so-called trembling hand. If you want to leave the nail design in the color of the substrate, then you can get by with just a few lines. If you want the manicure to become closer to the color of the veins, then apply the pattern on most of the nail.
Then, with undiluted gel polish, we make a drawing. It shouldn't be very much. She creates only accents. At the same stage, you can add thin gold or silver lines that recreate mica veins in the thickness of the stone. We dry everything well in the lamp.
At the end of the work, we decorate the nails with a finish coat, sealing the end, and dry again.
If the top has a sticky layer, remove it with a degreaser.

Possible mistakes

Sometimes a "marble" manicure may not work. And each method has its own reasons for this.

In water technology, this is most often associated with unsuitable water temperatures. If you took the liquid too hot, or, conversely, too cold, then you may not be able to mix the varnishes into the desired pattern. The water temperature should be at room temperature. Another reason for the impossibility of drawing a picture on the nails with a bowl of water is that the varnish is too thick. Such products do not spread well over the liquid; it is simply impossible to assemble them into any pattern. Also, varnishes from different companies can “conflict” with each other, so you should choose coatings from the same manufacturer and from the same series.
When applying a "marble" pattern with a film, the ornament may not work due to too much pressure on the polyethylene. Or if the gel polish is too liquid.

When applying a "marble" grid to the nail with a brush, you can also encounter difficulties. Do not choose too thick top coat. It will be quite difficult to draw lines on it. But even a too liquid substrate is unlikely to work, since it can leak under the cuticle during work and spoil the final result, as well as reduce the durability of the manicure.

Also, do not experiment with gel polishes from different manufacturers, since the compositions of such products may not be combined, and the coating will “curl” on the nails.

Beautiful examples

Manicure with a "marble" effect always looks stylish and fits both business style and evening attire. The main thing is to choose the right combination of shades. Here are a few examples of how you can beautifully decorate your nails using this technique.

White "marble" on all fingers. Classic variant. Suitable for business women. This design is equally good on both short and long nails.
Classic "marble" nails on a pair of fingers can soothe an overly catchy manicure with a lot of rhinestones, bouillon and glitter.

On long nails, you can arrange a dark and light imitation of marble, dividing them with a path of rhinestones. The result is a chic, very sophisticated evening manicure.
Delicate manicure in nude shades can also be diluted with white "marble" nails, and small silver streaks will add grace to your fingers. This option is suitable for everyday wear.

Gold streaks on black marble are already a manicure for relaxing in a nightclub or at a party.
"Marble" manicure looks good with bright fuchsia nails. Only in the veins of the pattern on the stone imitation you need to add a little hot pink tint.

Turquoise on the nails also looks quite elegant. In the evening version, you can add a little sparkle with the help of transfer foil.
Malachite manicure in combination with gold drawings will also be a great option for the evening.

There are millions of nail design options from the classic monochromatic finish to intricate patterns, from the usual jacket to unique stylish novelties. In the new fashion season, you can see marble manicure on the hands of fashionistas - original, stylish and admirable. He became a real hit, and young fashionistas literally “hunt” for him.

The marble effect on the nails is achieved using a special application technology and the use of two or more shades of gel polish. Both calm shades - gray, black, white, silver, beige, and bright pigments - emerald, red, blue or blue will help to recreate the natural beauty of the stone.

What it is

Marble manicure is an imitation of natural stone on the nail plate. Among the classic designs, gray, white and black shades can be noted - they are perfectly combined with each other and are suitable for daily wear. The original decision will be the choice of green or blue colors in order to "draw" malachite and any other gem on the nails.

At the end of last year, marble manicure literally burst into the daily life of modern fashionistas: women of all ages and statuses liked the unusual design. It looks great in everyday life and is suitable for a special occasion if you play a little with the shades of gel polish and the pattern itself.

It is not difficult to recreate the natural pattern of a stone on a nail: There are several techniques for making a drawing using water or a regular toothpick. You can also make a similar drawing on your nails at home, the main thing is to arm yourself with knowledge, patience and a few jars of gel polish.

How to draw

There are several ways to apply a marble pattern to the nail plate. Let's take a look at them right now.

With polyethylene film.

Take a regular plastic bag, for convenience, you can cut it into one small rectangular piece and crumple it in your hand beforehand.

Repeat all the preparation steps and apply the base color on the nail, dry it in the lamp;
Apply one or more colors of lacquer to the nail and blot them lightly with plastic wrap, without keeping it on the plate for a long time;
Follow the procedure with each nail to create an interesting natural pattern.

Drawing a picture with a toothpick or a thin brush.

On the main color or base, drop a little varnish and draw curved smooth lines with a toothpick. You can use one or more contrasting shades for a calm or bright design.

In order to get a natural effect, use shades of gel polish close to it. Particularly popular among them are gray (from light to ultra dark), black, emerald and turquoise.

A toothpick can be replaced with a thin brush for drawing and literally transfer the pattern of natural stone to the nails, choosing the appropriate shades. You will have to work directly on the nail, and for this it is not necessary to have the skills of an artist, you can safely redraw the pattern from the photograph.

Water technology.

For its implementation, you will need a liquid with water at room temperature, a set for creating a gel polish coating and the colors themselves. It is necessary to arm yourself with 2 to 4 bottles of colored varnish, provided that the shades blend well with each other. For example, you can take black and gray or choose something brighter - pink, blue, green. Another rule - let at least two colors contrast with each other.

To create a marble effect, you will need a manicure set - tools, fat cream, cotton swabs or discs.

First you need to prepare the nail for applying varnish: shape it, remove the cuticle and smooth the surface with a special buff;
Next, you need to degrease the plate well clinser, in a minute apply primer- it is used for better adhesion of the nail and the base;
Next stage - applying the base and drying it in the lamp;
Can apply base color, for example, white, beige or any other. This step is intermediate and not mandatory. It is necessary if you plan to create a light stone texture on a light background;
Now you need to prepare your fingers - treat the skin around the nail with a greasy cream so that the gel polish can be easily removed from it after drawing the picture;
Prepare a small container of water at room temperature, drop one drop of thick varnish there, then another, a third, connect them together with a toothpick and “draw” the texture of the stone on the water surface (to do this, you can use the finished picture);
Gently dip your nail in this drawing on the water;
Let the pattern dry on the nail and remove its excess from the skin with a cotton swab or disc;
The procedure must be repeated for each nail. or those on which it is planned to create a similar "engraving";
It is necessary to fix the nail design with a top coat, dry it in a lamp and remove the resulting sticky layer.

Not all masters choose the water application procedure, which is why there are alternative methods for creating a granite manicure.

Marble varnish.

You can create a stone manicure using ordinary gel polish, which is called marble. It differs from a ready-made pattern, which is visible during the classic application with a brush. It usually has a base shade and marble inclusions to create an amazing natural pattern on the nail plate. Today, such products are easy to find on sale in specialized stores or manicure parlors. Their main advantage is the ability to get instant results - effortless marble nail design.

The only thing that is required from a woman in this case is the skills of coloring the nail plate and a couple of hours of time.

Design

Today you can find tens of hundreds of manicure designs with the effect of natural stone: from bewitching marble to a brilliant emerald with gold splashes. Here are some tips when choosing a design:

New in marble design are bright nails, often green, emerald, dark blue and even black. It is important to add "cracks" of a contrasting shade: white, gray and yellow. Today it is fashionable to create not only a texture close to natural shades, but also a fantasy one.
The effect of the stone itself looks unusual, thin ribbons or gel polish of golden, silver color will help to make it even more original. Geometrically correct ribbons will create a modern design, artificial cracks - a little retro or bring chic.
Classic marble on the nail plate is usually achieved by pre-coating it with a light-colored gel polish (white or beige) and drawing with a brush, toothpick or needle, sometimes polyethylene film is used to create natural stains. How to breed dark lines at home, girls are often interested. We answer: by any means at hand, from a regular bag to a thin sewing corner. The more natural the lines are, the more natural the drawing will look. Do not chase geometry.
The marbled coating looks nice not on all fingers, but, for example, only on the ring and middle ones. The rest of the nails can be painted in some muted shade, blue, pink, white or beige. Asymmetry always looks good and remains relevant.
To make a manicure original and memorable, choose the main color of the sky, combine it with delicate pink, white and gold. The latter will bring a little chic to the nail design, especially if you mark the edges of the nail plate with it or create additional holes at its base.
Looks stylish green as the main shade, while it is important to choose a deep and rich color, it is appropriate to combine it with white and gold.

Marble manicure can exist separately or be used in combination with other techniques. The stone design looks especially attractive with holes of a light, dark shade, shiny or transparent. Unusually, marble is combined with a classic jacket - a rare combination, but always relevant and stylish.

A nude manicure will cease to be boring if you diversify it with a marble mood and apply contrasting stains on a pair of nails - index and middle or middle and nameless. For bright women, dark basic shades and light contrast stains are suitable. Blue and white interspersed with gold look unusual, just like saturated green, purple, yellow, black, blue.

Master classes

Master classes allow you to step by step make nail design using the "marble manicure" technique at home. The first of them is aimed at creating a picture using a film:

Build a solid base for further coverage- apply one layer of a transparent base and dry it under the lamp;
Further - choose the main or background nail color. Light shades like white, beige or light pigmented ones are perfect - soft pink, blue, purple, lavender. Apply color in two layers for saturation;
Before you start creating natural divorces it is necessary to take care of the skin around the nail and treat it with a greasy cream By the way, many girls use ordinary PVA glue - with it, gel polish is perfectly removed from the skin with one movement of the hand;
To get the effect of natural stone, apply on the central part of the nail a drop of the main color and contrasting it, blot with plastic wrap or regular package
Now carefully remove this film, let the varnish “play” a little on the nail and take on a natural shape, remove its excess from the skin with a cotton swab or disc, dry the nail plate in the lamp;
Now the same procedure must be carried out with the rest of the fingers and already after fixing the stone manicure with a top coat.

Numerous master classes from masters and lovers of original design in manicure allow you to bring unique ideas to life even at home. It is not necessary to be a top master in order to paint natural stone patterns on your own nails.

Marble effect on nails, water manicure how to do, step by step instructions

The nail design imitating natural stones looks very beautiful. This type of nail art is called "marble manicure". There are several ways to create it, here we will consider three, of varying degrees of complexity. However, all of them are doable at home, even if you do not have special training as a nail master. :-)

1. "Marble" on varnish.

1) We cover the nails with a layer of dense blue, let it dry completely.
2) Apply a layer of blue on top.
3) With a crumpled piece of cling film, with jerky movements, lubricate the freshly applied coating.
4) Align the varnish in the cuticle zone, using a wide bevelled.
5) We fix the top.
6) We erase smears and bloopers from the skin.
Ideally, you should use a protective film, then all errors and imperfections will remain on it, and it will be even easier to remove them.

2. "Marble" on varnish.

1. We choose varnishes with which you can imitate the "texture of natural stone", for example:,.

2. We use emerald as a base, apply in two layers, wait for complete drying.

3. We crumple a piece of cling film and cover it with black varnish.

4. We print the excess on paper, transfer the rest to the nails.

5. Repeat the same with a golden hue.

6. Using black and gold coatings, draw the veins with a thin brush.

7. We cover.

The next version of the marble design is called a water manicure, because it is done with water. We will need: for the cuticle, either a narrow tape or a fat cream, orange (it will be more convenient for someone to use toothpicks), a glass of water, and varnish (any other contrasting shades), patience and time.

3. Marble design. water manicure.

1) Apply to the skin around the nail plate or glue it with narrow adhesive tape (we smear it with a fat cream).
2) We paint the nails with white varnish, let it dry completely.
3) We drip white varnish into a glass of water, then red in the middle of the formed spot. Once again white and red, white and red, white and red (about 6-8 times in total).
.4) With an orange stick, "cut and twist" the lacquer blot, creating a pattern.
5) Dip your finger into the glass.
6) We wrap the excess pattern around the nail on the orange stick.
7) We take out the finger, remove the protective film or adhesive tape.
8) We fix.

Marble manicure with gel polish is extremely popular. It is suitable for every day, for special occasions, trips to the sea. Beautiful nails, similar to real stones, can be made very simply, but the master will need perseverance, patience, and accuracy. Today we will tell you how to do a marble manicure with gel polish, we will describe in detail the two most popular methods.

Most compatible colors

Outwardly, the manicure should resemble real marble - several shades are applied in divorces, smoothly replacing each other. The palette can be classic or bright, the main thing is to choose the right colors so that they harmonize. Most requested songs:

many people like the combination of blue and white, gray and white, pink and white are no less popular;
by mixing several shades of green, adding a drop of black, you can get a "real" emerald;
with the help of several shades of blue, with the addition of black, an imitation of turquoise is obtained;
take advantage of the golden lines, and layers of mica will appear in your marble.

Some call such a manicure water, this is due to the fact that one of the methods requires water. But some masters practice other methods, even using cling film or plastic bags.

What is water for?

Water is the perfect place to mix colors. In it, the nails are well enveloped with varnishes, the shades are applied easily and evenly, they dry well. We propose to consider the technology of performing marble manicure with gel polish using water.

What will we need?

a container for water (it is most convenient to use plastic, disposable cups that you do not mind getting dirty during the procedure, and then thrown away);
at least two colors of gel polish;
a needle or toothpicks to create stains;
base, top and primer;
water (do not use too cold or warm, room temperature is ideal);
drying lamp.

Execution technique

Before applying the color, it is necessary to prepare the nails well. To do this, the cuticle is removed, the plate is polished (not much, you need to remove the upper glossy layer so that the varnish holds better), create the necessary shape. Further:

Nails should be degreased with nail polish remover or a special tool. After that, a primer is applied, after drying - a base.
Drop a little gel polish into the water, put a few dots of a different color, create stains with a toothpick or a needle, making stripes, zigzags, spirals, and other elements.
The nail should be held parallel to the lacquer film, carefully, without jerking, smoothly place the plate on the film, straighten the edges of the lacquer with the clean side of the toothpick, evenly distribute it over the nail plate.
Perform this operation with the rest of the nails.
Apply nail polish remover to a cotton pad, remove blots from the skin.
If necessary, elements are drawn with a brush.
The lacquer is dried with a lamp.
Apply the base on the nails, dry under the lamp, remove the unpleasant sticky layer.

What should not be done to get a marble manicure?

Many novice masters make mistakes, and the client is dissatisfied with the result. It happens that a manicure can not be done at all. What is important to remember?

Use water only at room temperature, otherwise the technique will not work.
For manicure, choose varnishes from only one manufacturer, since different ones may not make friends.
Do not use thickened and expired gel polishes.

If you do not want to use this technique, then you can simply purchase ready-made gel polishes that give a marble effect. These are ideal for beginners and for girls who create manicure only at home, on their own. Such a varnish should simply be applied to the nails, dried under the lamp.

Marble nails without the use of water

You can do without liquid, consider the procedure for using this technique.

First of all, prepare the "canvas" - file your nails, remove the cuticle and sand the plate. After that, apply a primer for a minute, then a base, dry well.
Apply a thin layer of pigmented varnish, dry it well under the lamp. After that, apply a clear varnish, it does not need to dry.
Drop a little varnish on the foil, which will be darker than the base. Pour the clinser into a small container so that you can quickly clean the brush. With the help of the thinnest brush, apply a pattern on the nails similar to that which reminds a stone. These are various lines, vertical and horizontal, straight, curved, short and long. The beauty of gel polish is that you can take your time when applying the picture, the material will not dry out.
Dry the finished drawing for the required time under the lamp.
Apply top, dry again, remove the top sticky layer.

Photos of marble manicure with gel polish are available in our article. In fact, there are a lot of pattern options, do not be afraid to experiment, come up with something new.

Marble manicure with gel polish using a package

On your own at home, you can create no less attractive "stone" marigolds than those offered in the salon. How to make a marble manicure with gel polish and a plastic bag? It's quite simple, it will look not only on long, but also on short nails.

Prepare your nails by polishing them, applying primer and then base.
Cover the plates with a background color, dry.
Drop a few drops of another varnish on the nail, only in small portions, otherwise you can get very dirty, and the drawing will not work.
Attach a piece of the bag to the nail, move it a little over the surface, if the pattern suits you, remove it.
Dry your nails, cover them with a top coat, remove stickiness.
Clean the skin around the nail with a cotton swab.

The bag can be crumpled and using a stamping method to create a pattern similar to stone, it will be easier. Also, some use a technique similar to water. The varnish is applied directly to the bag, the pattern is created on it with the help of a toothpick. After that, the nail is gently applied to the surface, leaving an impression resembling a stone coating on it.

Marble manicure with gel polish is ready! To make it attract attention, do not use more than four shades at once.

Popular in category: