home › Health › Trapeze dress with a detachable back pattern. How to make an a-line dress pattern based on a finished pattern, expert advice

Trapeze dress with a detachable back pattern. How to make an a-line dress pattern based on a finished pattern, expert advice

A-line dress is a stylish summer outfit that should be present in every girl's wardrobe. It perfectly emphasizes the female silhouette. Of course, it can be purchased in a fashion boutique. But a trapezoid dress sewn independently will not be worse. The main thing is to choose a quality fabric to your liking.

Modeling a pattern of a trapeze dress is not such a difficult process. In work, you can rely on the pattern. Only an additional construction of a pattern of a single-seam sleeve is required. Also, on the pattern of the back, you will need to remove the tuck and slightly expand the neck at the back (about a couple of centimeters).

In the side part, it is necessary to make a 7 cm flare, and then draw a line of the side seam. Do not forget that the one-seam sleeve should be short enough and reach the elbow line.

As a result of cutting, you should get such details as: the sleeve, the front of the dress, the back of the dress, the facing of the neckline of the front, the front of the dress. By the way, be sure to leave allowances for the seams (3 cm at the bottom).

sewing process

After cutting, you can start sewing a trapeze dress. This is a simple process that will not take you much time. On the front of the dress, it is necessary to stitch the chest darts and carefully iron the bottom seams. Then sew the shoulder and side seams. As for the allowances, they must be smoothed and carefully processed.

Be sure to treat the facings with thermal fabric and stitch along the shoulder seams. After that, put a cutout at the neck and stitch. Be sure to cut the allowances, turn out the facings, overcast them and iron them carefully. With the help of stitches, the facings need to be tacked to the shoulder seams. The facings on the back should be tucked up and tacked onto the laces of the zipper.

By the way, you should describe in more detail the process of sewing a zipper into the back of the dress. First, determine the location of the lightning and strengthen this place with a small piece of thermal fabric. Then place the frame under the zipper and cut it from the neck to the center.

The zipper should be laid under the frame so that the teeth are visible. Then it remains only to baste and stitch the zipper on the front side. At the end, do not forget to turn and sew the allowances on the bottom of the dress and sleeves by hand. That's actually the whole process of sewing a trapeze dress.

The trapeze dress style was made several decades ago by the famous designer Yves Saint Laurent. He made an extraordinary sensation in the fashion industry, becoming a trend for absolutely all seasons. The peculiarity of the style is that it fits all figures without exception. It can be worn by both girls with ideal parameters, and those who want to hide figure flaws or a rounded tummy. In a word, an A-line dress is a versatile piece of clothing. In order to understand all the basics of sewing such a product, you need to know the secrets of creating a pattern, which must be made with extreme accuracy. Today we will tell you how to sew a trapeze dress, what you should pay special attention to, and introduce you to useful recommendations. Let's get started with this popular product.

Who is a trapeze dress suitable for?

Despite the long period of time since the birth of this style, the A-line dress occupies a leading position in the wardrobe of the most avid fashionistas of the present time. It is versatile due to its simple cut and the possibility of sewing a product from absolutely any fabric, which allows you to wear it both in summer and in winter.

Why a trapezoid? But because the dress is narrower at the top and goes to the expansion to the bottom.

This cut is perfect for:

Thin girls (a wide hem will hide thin legs and narrow hips well).
Fat women (hides figure flaws: a wide waist, and a dress with sleeves - “surplus” on the arms).
Expectant mothers (allows you to hide an interesting position from prying eyes, without restricting the movement of the pregnant woman).

Important! Girls with a beautiful figure appreciate this dress for its simple style and the ability to emphasize their strengths of a beautiful physique. One of the important advantages of this product is its ability to adapt to absolutely any occasion. It can be worn in everyday life, for work in the office or for a special event.

DIY A-Line Dress

For yourself, you can sew several different options for this style. Photos in fashion magazines or Internet examples will come to your aid, where you can find not only the most popular styles, but also a pattern with a detailed description of all the necessary actions.

Important! Such clothes can be worn both with a hairpin and with low-speed shoes. A variety of accessories and a handbag to match will help you complete the outfit.

styles

Let's look at the most popular A-line dress styles that are suitable for each figure:

Warm dress for autumn.
Long evening dress with three-quarter sleeves.
Short sundress with pleats.
Classic black and white dress.
Long dress with a high neckline, long hem and sheer sleeves.
Bright summer model from easy material of the A-silhouette.

Quick pattern

We have already told you that this product can be made using a ready-made pattern example. Experienced needlewomen can perform it quickly and correctly in a short time. For beginners, it is recommended to make a pattern according to the pattern of a T-shirt or T-shirt. But what about an inexperienced young girl who only has a desire, but no special knowledge?

A pattern for sewing a trapeze dress without a pattern will come to the rescue:

Choose the right fabric.
We take measurements of the circumference of the waist, hips, length of the product.
We buy material with a margin for allowances (approximately + 10-15 cm to the original length).

Classic patterns for a do-it-yourself trapeze dress

So, the pattern of the A-line dress is performed according to the following instructions:

We measure the following parameters and transfer them to paper to build a pattern: shoulder length (starting from the neck), half chest and half waist.
We select the length of the product at our discretion.

Important! We do not take into account traveling tucks, since they are not provided for our product.

We deepen and expand the neck of the back. We make the cut not too big so that you can sew in a zipper or make an open cut with a buttonhole on top of the product.
We expand each detail by 6-7 cm for a slight flare, giving texture to the style of the A-line dress.
We draw a new line along the side seam, taking into account the flare described above.
We close the chest tuck on the shelves by transferring it to the side seams.
We shorten the chest tuck by 1.5 cm.

Important! We told you how to make a simple pattern that is suitable for sewing an A-line dress not only for a woman or teenager, but even for a little girl. In the latter version, a children's product can be effectively beaten with lace, textile flowers, a bow and a belt.

How to sew a do-it-yourself trapeze dress for a girl?

If you want to make a simple dress for your little fashionista on the one hand, and an elegant dress on the other, then our master class is perfect for you.

Important! If you are a new mom, we recommend starting with a sleeveless A-line dress, which can become a basic template for other products of this style. You will spend only a few hours of your free time, and in the end you will get a beautiful outfit with your own hands.

Materials and tools:

Fabric to choose from (cotton, spatula, thick knitwear, wool mixture). The length of the fabric is equal to the length of the finished product.
Paper for building patterns.
Simple pencil.
Ruler.
Tape measure.
Threads in tone.
Needle.
Scissors.
Cleaving pins.
Chalk or remnant.

Important! Choose a fabric that is not too stretchy for sewing this dress. If you buy synthetic fabric, then your finished product will sag, which will make the dress unattractive.

Master Class

We will cut the product, taking a simple T-shirt in a bright color as a template (a T-shirt with an interesting print is also good). So, let's look at a detailed master class on sewing an A-line dress:

Fold the fabric in half. We put our T-shirt or T-shirt on top of the material, draw a contour, make a line on the bottom of the armhole.
We measure the chest circumference of the model. We mark with a centimeter on the center line half of the previous value. We connect the obtained points with the top of the shoulder.
We draw from the points at an angle to the bottom of the line by the amount of expansion (flaring) we need.
Cut out the resulting silhouette.
We chip, sweep, and then grind the side seams.
We process the armhole, neck and hem with an oblique trim.
We cut out a pocket from a quadrangular piece of fabric, overcast the seams and attach it to the main product.
Sew a lace ribbon to the bottom of the outfit.

That's all the work! A-line dress is ready to use!

How to sew a do-it-yourself trapeze dress with a sleeve?

If you want to sew a sundress with sleeves, then it is better to make a sleeve with one seam. Now we will consider the pattern of a dress pattern with similar sleeves.

Materials and tools:

To create a pattern, we need:

The right t-shirt for you.
Thick paper.
Tape measure.
Long line.
Scissors.

Progress:

Fold the T-shirt in four and place it on the prepared pattern paper.
We bend the sleeves of the product so that they do not interfere with our further work.
We outline the borders of the T-shirt.
We draw a line along the length of the template, mark on it a quarter of the volume of the hips + 7 cm for the allowance.
We connect the marked line with the bottom of the armhole.
We cut the neckline along the contour, circle the sleeve, folded into two parts. Add the required length to the workpiece and cut it out.

A pattern for an A-line dress with sleeves is ready!

Important! Taking the pattern described above as a basis, you can sew not only this style yourself, but also experiment with other interesting models. To do this, you will need to make two chest tucks and narrow the bottom of the product.

How to sew a trapezoid dress on a yoke?

This tailoring option is suitable for those girls who want to get not only a practical, but also a more original dress. We would like to note that such a pattern requires certain knowledge and skills in sewing, so if you are a beginner, start with an easy option without a pattern.

Materials and tools:

A piece of fabric with a length equal to 2 lengths of the finished outfit.
Paper.
Pencil.
Scissors.
Ruler.
Pattern.
Tape measure.
Chalk or bar of soap.

Sewing technique:

We measure the length, starting from the shoulder and ending with the chest line, and from the shoulder to the center of the shoulder blade.
We measure the circumference of the model’s chest and divide the resulting figure in half.
Based on the parameters obtained, draw an equilateral rectangle.
We draw a shoulder line along the shelf.
We round the neckline on the right to the depth we need. To perform this action, we used a template.
We measure the length of the shoulder armholes and mark the points on the left.
Set aside a segment of the length of our armholes from below and above from the shoulder. We round the resulting line, forming it 3 cm deeper than along the back of the product.
Let's cut out the rest of the details. The length of the upper part of the trapezoid is the half-girth of the chest.
We draw on paper a line of the length of the trapeze dress.
Set aside 7 cm to the right to expand the skirt. Draw a trapezoid with a pencil.
Cut out the sleeves. If you want an outfit without them, then skip this step.
Now we cut out all the previously marked details and transfer them to the fabric.
We grind the seams, try on the product, and then finally grind it on a sewing machine.

At one time, the style of the dress, invented by the great Yves Saint Laurent, made an extraordinary sensation. Replacing the form-fitting silhouette that has long been in demand in the fashion world, the loose cut of the trapezoid has moved away from the repetitions of the female body. Nevertheless, the image of a woman was not lost in the abundance of fabric and did not begin to resemble a veil, designed to hide the seductive curves of a female figure. Thanks to the image from Yves Saint Laurent, the dress only emphasized the extraordinary femininity and even some girlish helplessness of its owner, thereby giving free rein to the male imagination. The first, they are classic, models of a-line dresses, which appeared in 1957, were sleeveless outfits, with an A-line, without a hint of a waistline. Let's show you a popular pattern for creating a stylish a-line dress!

But despite a good period since the birth of the style, the relevance of the dress has not been lost to this day. It is still popular with women, including because of its uniqueness: in summer versions, the dress is sewn from airy, flowing fabrics, in winter, half-woolen warm models will look great.

Today's variability of the classic model will not leave indifferent any fashionista. During this time, the trapezoid has changed and gone beyond the classical model: sleeves appeared, the waist was designated, and the fashion for length changed several times.

In the 40s and 50s, a length slightly below the knee was preferred. In the 60s, women became bolder and opted for the minimum length of the dress. In the 70s, the flower children lengthened the skirt to the floor.

Learning to create patterns for trapeze dresses on our own

Today's length depends solely on the owner's mood: from a defiant mini to a strict maxi.

The cut of the dress can also be with options, so girls who want to hide the flaws of their figure should pay attention to it. For overweight and pregnant women, the trapezoid will become an assistant, hiding the volume of the figure. Depending on where the expansion of the dress begins, different tasks of draping problem areas are solved. If the trapeze starts from the armhole, almost near the shoulders, then the dress will help hide the waist or a rounded tummy. If the expansion starts from the waist, then you can divert attention from the overly wide hips.

You can complement an elegant outfit with a thin turtleneck, dressed under a dress, or an elegant jacket, which will fit perfectly into the office style.

A variety of prints and bright fabrics will not need additional decorations, as they are good on their own. But if you add them with bright accessories, then a memorable image of the hostess will be provided.

Popular in the sixties, British supermodel Twiggy is still the most famous admirer and lover of the trapeze style (see photo). And you can trust her, because she was the style icon of her time. All women of fashion looked up to her and imitated in everything: from transparent thinness and short haircuts to clothing preferences.

As mentioned above, the style of the dress is universal for any type of figure and will suit different age categories: for both women and girls. And in order to show off in a new thing, it is not necessary to search for the right thing in clothing stores. It is enough to set a goal and then you can sew a beautiful dress yourself.

There is an option to use ready-made patterns, which today can be downloaded from any site, but we suggest building it yourself, especially since the pattern is simple and even a novice craftswoman can handle it. At the same time, it doesn’t even matter what time of the year the dress is sewn and whether it will have a sleeve: the same pattern is used in both the first and second cases, and the sleeve pattern is built separately.

A pattern of a trapezoid dress is built like a regular pattern, with the spacing of individual measurements. A trapezoid is good because it does not need darts for the waist.

From these drawings, you can make different models of a trapezoid: both classic A-line silhouettes, with different skirt lengths, and a boat dress, with a characteristic neckline.

For the summer version, you can do it even easier: just take your T-shirt, circle it on the fabric, adding allowances for the seams and expanding downwards, and the pattern is ready.

This dress will look both on its own and with an additionally dressed belt.

The richness of the texture and color of the fabric, of course, is the preference of the fashionista. As for fabrics, it is advisable to choose flowing, well-draped materials - they will add their touch to the future image of the girl.

Be trendy, be stylish and be talented.

Video related to the article

In order to fix the material and finally make sure that it is possible to sew a dress on your own, we present to your attention a video:

The style of the dress, narrowed at the top and gradually expanding towards the bottom, is suitable not only for the perfect figure. With the help of such an outfit, it is possible to hide many flaws. That is why he is so popular among obese and thin women. Moreover, a self-sewn a-line dress has no less presentable appearance than one bought in a fashion boutique.

The style of the dress, narrowed at the top and gradually expanding towards the bottom, is suitable not only for the perfect figure

What is necessary:

pencil;
graph paper;
centimeter;
scissors;
the cloth.

Pattern building:

Measure the circumference of the chest and divide the resulting number by four.
Mark this value along the top edge of a sheet of paper.
Now measure the distance from the shoulder to the armpit.
Make a mark on paper and draw a perpendicular segment from the first mark.
Take measurements of the circumference of the waist. Divide the resulting number by four.
Make a mark on the left side of the sheet of paper.
Measure the distance from the chest to the waist and mark this point on a perpendicular segment.
Connect this point to the waist mark, thereby obtaining the shape of a trapezoid.
Draw a neckline
Mark on paper and the length of the future dress.
Draw a straight line from the waistline to the very bottom, slightly expanding.
For the front of the product, draw a similar drawing, but additionally make grooves.
To do this, draw a straight line from the beginning of the neckline to the bottom of the armhole, add another five centimeters and put a dot.
Draw an isosceles rectangle, the base of which should be equal to two centimeters, from this point and directing to the side cut.

The finished pattern is transferred to the fabric.

Loose trapeze dress (video)

A-line dress for the full: how to cut

Finding a dress for a fat woman is not as difficult as it might seem at first. Universal pattern can be adjusted to any size. It is enough to take all the measurements.

Step-by-step instruction:

Fold the fabric in half, but do not combine the edges, but simply place them parallel to each other.
Leave a little space from the edge to the fold, where in the future you will need to place the details of the shelf and back.
Make allowances of one centimeter on the sides, front, elbows and shoulders.
Bottom seam allowance to make about three and a half centimeters.
Mark the fabric on the sprout, neck and rollback without allowances.
Circle the pattern along curved lines.

Cut the material behind the stroke line.

Sundress-trapeze do-it-yourself

You can tailor an A-line sundress in just five minutes. Sewing such an outfit is trusted even by beginners, since it is impossible to come up with a simpler model.

Progress:

First of all, take three measurements, including the circumference of the hips and chest, as well as the height of the shelf.
First fold the fabric in half, right side inward, then fold again.
On the upper edge, set aside a quarter of the measurement of the circumference of the chest and add three centimeters.
After that, draw a line of armhole depth., The length of which should be twenty-five centimeters.
Measure the height of the shelf along the fold and set aside a quarter of the measured hip circumference at the same level, add another three centimeters to them.
Connect two labels to form a base.
In the corner draw a neck and draw a shoulder.
Flare the outfit to the bottom.
Cut, taking into account the seam allowances.
Sew a couple of shoulder and side seams.
Process the edges.

You can tailor an A-line sundress in just five minutes

Finish the hem, armholes and neckline with bias tape.

How to sew an a-line blouse

Sewing an A-line blouse with a length difference is a matter of a couple of hours. Despite the obvious ease of manufacture, a jacket or tunic made in this way will look amazing.

Progress:

Using the basic pattern of a trapeze dress, first of all determine the length of the front shelf and the depth of the neckline.
Measure from the neck line to the front shelf dewy 45 centimeters and put a mark.
Draw a line perpendicular to the back and front line.
Measure down the back another twenty centimeters. This length will be the difference in length.
With an arcuate line, connect the lines of the back and drop.
Divide the back and shelf into four identical parts and push these parts so that the distance between each strip is exactly ten centimeters.
Determine the length of the sleeve by measuring down the resulting length and draw a line.
In order to form the cuff, draw another line, just five centimeters below the previous one.
Cut the sleeve pieces.
Transfer the pattern first to paper and then to fabric.

Sew all details.

A-line dress in the style of the 60s

The classic outfit, invented back in the distant sixties, is popular to this day. This is a comfortable and beautiful dress that can be worn to work, to a party, even to dinner at a restaurant.

Progress:

Measure the length of the sleeve and put on paper the value that was obtained as a result.
Now measure the circumference of the arm, add ten centimeters to the resulting value and put this segment on paper.
Draw a pair of perpendicular segments along these points.
Set aside fifteen centimeters from the top line and draw a horizontal line.
Divide in half and draw a vertical straight line in the center.
Draw a triangle from the highest point to the lines of descent.
Divide each half of the sleeve in half again and draw vertical segments along the entire length.
Draw an arc to the bottom from the right edge to a vertical straight line, which should deviate a couple of centimeters from the side of the triangle.
Draw the same arc on the left side, but here the deviation should be only half a centimeter.
To the right of the center of the right part of the triangle and to the highest point, make an arc upwards. The deviation in this case should be only one and a half centimeters.
Draw an armhole line.
Cut out the detail. Its right side will refer to the front, and the left to the back.

A-line dress on a yoke: a master class

This outfit looks perfect even without additional details. If desired, it can also be modernized, equipped with a flounce, instead of the usual sleeve, model a raglan.

Progress:

Measure the length to the middle of the shoulder blade, first from the chest, and then from the shoulder.
Also measure the circumference of the chest and divide this value in half.
Draw a rectangle using the given data.
Draw lines along the shoulder.
On the right side, round the neckline to the required depth.
Measure the depth of the armhole and make a mark on the left side.
Set aside from below and above from the shoulder a segment corresponding to the length of the armhole.
Round the line, deepening three centimeters in front.
Unfold all other elements.
The chest circumference corresponds to the top line of the dress.
Now draw a length line.
To expand, set aside seven centimeters.
Cut out all the details without exception and transfer them to the fabric.

This outfit looks perfect even without additional details.

Stitch and stitch all seams.

How to make an a-line dress for a girl

In order to sew a trapeze dress for a girl, you can use absolutely any pattern that is used when sewing an outfit for adults. It is only necessary to take all the measurements and cut out in accordance with them.

Also pay attention to the fabric. Children's clothing must be soft, pleasant to the touch. The dress can be white, black, red and even pink, but under no circumstances should it cause discomfort. That is why it is not recommended to sew it from gabardine. It is better to use chiffon or satin.

A-line dress pattern (video)

Inna

I really liked the 60s style A-line dress. I'll sew one of these days.

Modeling a pattern of a trapezoid dress.

You can independently adjust the width of the dress, as indicated in the diagram. But do not forget about the darts in the chest area. After all, it is they who make the style of the dress feminine, and not like an ordinary bag. If you are interested in a pattern of a-line dress with a sleeve, then you can take measurements from any T-shirt that fits you well. This method is well suited for beginners in the field of sewing.

If you are using knitted fabric, then your sewing machine must be equipped with a special foot for stretch fabric. If you do not know how to sew knitted fabrics on a conventional sewing machine, then first read the article:. The seam should be processed along the line of the shoulders and along the entire length of the product. If the fabric falls off a lot on the cut, then it needs to be processed on an overlock. As you can see, sundress and a-line dress, the pattern is very simple, can be created in just half an hour. At the same time, you will receive a unique product that cannot be found in any designer collection in the world! You can decorate the dress with a brooch or other accessories, depending on your image.

More interesting models of trapeze silhouette dresses and patterns for them: