home › Happiness › Knitted slippers crocheted from hexagons openwork motif. Knitting for beginners: beautiful crochet hexagon slippers

Knitted slippers crocheted from hexagons openwork motif. Knitting for beginners: beautiful crochet hexagon slippers

Crochet slippers from motifs This is a very bright home accessory. They fit easily, but look bright and elegant. The size of slippers is determined by the thickness of the thread and the number of rows. If you need to make a large size, then it is better to choose thicker threads. And increase the number of last rows by making increments in the corners. As you may have guessed, the author of the master class is a needlewoman

Slippers from motifs (crochet, master class)

To knit slippers from motifs, we need:

Yarn (yellow, peach, raspberry and green);
Hook.

Let's start knitting. And the most important detail here is hexagonal motifs. Three of them need to be connected.
We will start knitting from the middle with yellow yarn.
In a sliding loop, we will perform eighteen columns with two crochets.
Photo 1

Next, we will break the thread and attach the peach-colored yarn, with which we will knit the second row. It will consist entirely of lush columns. We knit two air loops. And in the same place we stick a hook with a crochet. We pull the thread, but do not knit anything. Once again, we stick a hook with a crochet here and pull out the thread. Now we will knit all the loops from the hook together. And let's make an air one.
We knit in the next loop a new magnificent column, consisting of three untied columns with a crochet.
And so the whole series until the very end.
Photo 2

Next we will knit with raspberry yarn. Attach it between the lush columns. Let's make three lifting loops. We make a crochet on the hook and stick the hook in the same place. We pull the thread and knit only the first loop and yarn over. We repeat again.
Now you can knit all the loops from the hook and make two air loops.
Let's move on to the next element. We knit it between the following lush columns.
That is, three times we perform a double crochet that has not been knitted to the end. We knit three columns with a crochet with a common tip.
Photo 3

Cut the thread and attach the green one.
We knit further between the columns of the previous row into an arch of two air loops, five columns with a crochet. They will form a corner.
In the next two arches we will knit three such columns. Then again five. And so on until the end.
Photo 4

Let's finish the motif with single crochets. We knit in the middle where we have five double crochet, three single crochet. Then ten columns, one in a loop. Then again three columns, then ten, one in a loop. And so on.
Photo 5

Now that we have all the motifs ready, we crochet them with single crochets or connecting posts on the front side.
It is also necessary to sew those two sides that are marked in the photo with red lines.
Photo 6

Here we have the base of the sneaker already turned out. And now it remains to tie the sole for her.
Photo 7

The sole fits very simply for such slippers. We collect a chain of twenty loops. And we knit thirteen reversal rows with double crochets.
Next, we make one decrease on the sides. And we knit the next two rows with only one decrease.
Then we attach the thread on the other side of the sole and do the same.
Here's what happens.
Photo 8

We sew this sole to slippers either with a hook or with a needle.
And our slippers from motives are ready!
Photo 9

And another video from YouTube about knitting similar slippers:

Like the product and want to order the same from the author? Write to us.

More interesting:

Unusual toys and bags

Knitted toys are rather original gifts that fill with positive not only their owner, but the master who created them for kids. Having tried once in a lifetime to do something with your own hands, you can no longer stop - you want to create and give these funny creatures to the world. Fortunately, knitted toys are now gaining more and more popularity. For example, hexagons can be used to make cute balls, teddy bears, hippopotamuses, spy toys (children hug them when they sleep), comforters and much more.

Knitted bags, which are an integral part of women's summer wardrobe, look no less impressive. In the daily arsenal of today's fashionistas, it is imperative to have at least a few of these attributes. They are perfect for almost any outfit, whether it's a classic suit or regular jeans and a T-shirt.

They also differ in their appearance: some resemble old reticules, others are beach bags, and others are backpacks. Given the color and shape, every fashionista will be able to choose exactly what suits only her.

Decor elements

Using just one type of crochet hexagonal motif, you can try to create an incredible variety of beautiful and useful products for your home. It is enough to skillfully use combinations of various shades and textures of yarn to get an original element of decor in sustained tones or flashy colors. Knitted accessories include:

There is no limit to creativity, you just have to decide what exactly you are going to make.

Original clothes and shoes

Using hexagons, you can create a variety of tops, dresses, skirts, cardigans, shorts and more. It is enough to arm yourself with yarn and crochet, and then at any time of the year you will look bright and irresistible in your unique outfits, both in the office and on the beach.

Crocheted shoes will create an additional feeling of comfort and warmth in the house, as well as save your feet from the cold floor during cloudy hours of autumn or frosty days of winter. In addition, such slippers or boots can be used as a gift for special occasions in the family.

Knitted shoes are becoming more popular every day. It does not matter if it is bought in a store or made by hand, the main thing is that the shoes are original and beautiful. Also it can be made from leftover yarn that have accumulated over many years of creativity. It is enough just to choose the motif scheme you like and decide for whom you will knit - for your children, husband or relatives. In this case, you need to choose the appropriate color range of threads.

Crochet slippers

There are several patterns of hexagons, from which you can knit slippers for yourself and loved ones. Having familiarized yourself with them, you should proceed to a master class on making knitted slippers from hexagonal motifs.

Crocheted hexagon slippers according to the "African Flower" pattern will look original and original.

To connect this hexagon, follow the pattern:

Of course, do not forget that you can change the colors to your liking.

The Asterisk pattern is also ideal for creating home shoes.

Knit according to this pattern:

Materials and tools

If you want to have bright and unusual shoes for the house, then hexagonal slippers are the perfect choice. To make such shoes, you need to make the required number of samples using a crochet hexagon (diagram and description are attached).

To start knitting you need to go shopping for needlewomen or look into your bins and find there:

As you can see, there is nothing complicated here. But you can also take any other yarn that is available, while choosing the color you like the most.

The working process

For each slipper, you need to make 3 hexagon samples. If the yarn seems too thin, knit in 2 strands. After all, for slippers to last longer, they must be dense. How to crochet this hexagon, the diagram shows in detail.

These are the motives that should come out.

Now you need to tie the insoles. The distance from the edge and between the holes should be approximately 5 mm. Tying is carried out with single crochets in each hole.

We collect slippers, adhering to the finished scheme in the photo. To do this, we perform the seam (1) - this is in front of the slippers, then the seam (2) - the back. The seams (3) must be sewn to the insole. The sides (4) remain free, i.e. they do not need to be sewn on.

Hexagonal patterns can be connected with a hook or sewn with a needle. You can crochet the motifs on the outside or use a needle and sew them on the inside. By sewing the top of the product to the insole, you will get comfortable home slippers that ideally create additional comfort in your home.

Selection of schemes

Popular and simple patterns of hexagonal crochet motifs are sure to come in handy when creating new things and patterns. With their help, you can understand how to crochet a hexagon for beginners, as well as master the Snowflake pattern, which will gracefully fit into the most sophisticated wardrobe items.

Having mastered the basics of crocheting hexagonal motifs, you can create things of any complexity, even if you have recently held a hook in your hands. It is enough to believe in yourself and not doubt your abilities!

Handmade knitwear is traditionally at the peak of popularity. Warm and cozy, they help to keep warm in the cold season and emphasize the individuality of their owner. It's just that these things are quite expensive. Meanwhile, getting a pair of original knitted slippers or boots is not difficult at all. This article provides a variant of crocheted hexagon slippers with a diagram and description. All fashionistas in the family will wear such shoes with great pleasure.

Benefits of knitted shoes

Knitting shoes for the home is a long tradition of craftswomen. Undoubtedly, the obvious advantages of knitting shoes for yourself and loved ones include the uniqueness of the finished product, cost savings and the realization of the creative potential of the craftswoman. And the manufacture of slippers allows you to use assorted yarn residues. Knitted hexagonal motifs are great for combining not only yarns of different colors, but different compositions and even thicknesses.

Colors can alternate both in each row and in separate ornaments. Even if you do not have the required amount of yarn to knit the required number of identical pattern fragments, you can make completely different hexagons. The most important thing is that the colors are harmoniously combined with each other and that the darkest yarn is enough for tying and stitching the details.

Depending on the material you choose for the sole, such shoes can be worn both at home and on the street. For home shoes, one of the most important criteria is warmth. There are several ways to make the insole of slippers warmer. For example, cut insoles from felt or fur. For the sole, use genuine leather or the same felt.

According to the detailed master class presented below, you can easily learn how to knit slippers from hexagonal motifs. And for this, you do not have to be an experienced craftswoman or the owner of a wild imagination, you will only need to prepare your favorite yarn of different colors, a hook and be patient.

Let's get creative

For work you will need:

yarn of suitable colors;
material for sealing the sole (leather or leatherette is perfect for slippers, but for outdoor wear it is best to use the sole from factory shoes);
hook number 3;
scissors;
tape measure.

In order to assemble a pair of ordinary low slippers, you need to knit 6 elements - three for each. Two elements form the heel, and the third serves as a toe.

For short boots, 2 more details will be needed. The top height can be raised to any height, each level will consist of 2 additional parts.

We knit hexagons

There are many beautiful options for knitting hexagons. Let's take a closer look at one of the schemes.

Work description

1 glad: we knit 8 air loops and connect them in a circle.

2 row: starting from the junction, we knit three lifting air loops, and then 17 double crochets.

4 row: 3 lifting air loops, a bunch of 2 columns with a crochet from one loop, 2 air loops, 3 columns with a crochet from one. Ornament repeat 18 times.

5 row: in the first two arches formed by the air loops of the previous row, we knit 3 double crochets, in the next arch 2 double crochets, we knit an air loop and 2 more double crochets. Now you can see the resulting 6 corners.

6 row: we knit a single crochet in each gap, in the corners - 2 single crochets, separated by 2 air loops.

7 row: knits similarly to the 6th, with the difference that 2 loops in the corner are separated by 1 air. loop.

Product assembly

When the required number of parts is ready, proceed to assembly. We arrange three elements in the form of a triangle.

We sew three elements on two sides, thus forming a side seam. To do this, we knit a series of single crochets, capturing the loops of both parts. Thus, we sew the 1st motive with the 2nd on one side. Then we sew the 3rd to the 1st.

To form the heel seam, we connect the outer sides of the 2nd and 3rd elements.

Thus, we got the top of the sneaker. It remains to sew it to the selected option of the sole. If the model needs to be insulated, then first the upper part of the shoe is sewn to the insole cut earlier from fur or felt, and the sole is sewn to the resulting structure. The second slipper is made in the same way.

Bright hexagon slippers are ready!

Now you can easily experiment with color combinations and knitting elements using the patterns below.

Video on the topic of the article

Get a lot of ideas from the video tutorials with descriptions. Happy creativity!

To knit boots you will need:

100 g dark green, 50 g each blue and yellow-green acrylic yarn; - hook No 10.

Attention!

You can knit socks 1 size up/down using a hook 1 size up/down without changing the thickness of the thread. If you take yarn of a different thickness, the result will be unpredictable; in this case, we recommend knitting a sample hexagon and measuring its dimensions.
How to crochet boots or slippers:

Hexagon: side length 6 cm, diameter 13 cm.

With a yellow-green thread, tie a chain of 6 air. n. and close it into a ring 1 conn. Art.
1st p.: 3 air. lifting point, 17 tbsp. s / n in the ring, 1 connection. Art. in the 3rd air. lifting point; cut and fasten the thread (= 18 st. s / n).
2nd p .: fasten the dark green thread in the conn. Art. 1st river, 3 air. lifting point and 1 tbsp. s / n in the same loop, * 1 air. p., knit 2 tbsp. s / n together in the next. Art. s / n, repeat from *, 1 conn. Art. in the 3rd air. lifting point; cut and fasten the thread (= 18 pairs of st. s / n).
3rd p.: fasten the blue thread in the conn. Art. 2nd river, 3 air. lifting and knit 2 tbsp. s / n in the same loop, * 2 air. p., knit 3 tbsp. s / n together in the next. air n., repeat from *, 1 conn. Art. in the 3rd air. lifting point; cut and fasten the thread (= 18 triple st. s / n).

4th p .: fasten the yellow-green thread in the conn. Art. 3rd river, 3 air. lifting and 2 tbsp. s / n in the first arch from the air. p., * 3 tbsp. s / n in the next. arch from air. p., next. knit arch: 2 tbsp. s / n, 2 air. n. and 2 tbsp. s / n; 3 art. s / n in the next. arch, repeat from *, replacing the last 3 tbsp. s / n for 1 connection. Art. in the 3rd air. lifting point; cut and fasten the thread.
5th row: turn the hexagon wrong side up, fasten the dark green thread in the conn. Art. 4th river, 2 air. lifting point, 1 half-st. in every st. s / n and 3 half-st. in each corner arch of 2 air. p., 1 conn. Art. in the 2nd air. lifting, cut and fasten the thread.

Knit 6 hexagons for short socks and 10 hexagons for long socks.

6th p. (only for 4 hexagons of long socks that form the shaft): fasten the blue thread in the conn. Art. 5th river, 1 air. lifting point and 1 tbsp. b / n in the same loop, * 1 tbsp. b / n in each loop to the first corner, 2 tbsp. b / n in the middle of 3 semist. 5th p., Knitted in a corner arch, repeat from *, 1 connection. Art. in the air lifting point; cut and fasten the thread.

Sole: Knit in straight and reverse rows.
With a dark green thread in 2 additions (without changing the hook), tie a chain of 5 air. P.
1st p.: 2 air. lifting point and 1 half. in the 3rd air. p. from the hook, 1 half. in every trace. air p., 2 half a century. in the 1st air. n. chains.
2nd - 4th p.: 2 air. lifting point and 1 half. in the same loop, 1 half. in every half. previous row, 2 half. in the 2nd air. n. lifting the previous row.
5th - 12th p.: 2 air. lifting point, 1 half-st. in every half. previous row, 1 half. in the 2nd air. n. lifting the previous row.
13th - 15th p.: Knit as 2nd, 3rd and 4th p.
16th - 24th p.: knit as 5th p. 25th p.: 2 air. lifting point, 1 half-st. in each half-st., knit together 1 half-st. in the last half. and 1 half. in the 2nd air. n. lifting the previous row.
26th - 30th p.: 2 air. lifting point, 1 half-st. in every half. previous row, knit together 2 half-st.
After finishing the 30th row, cut the thread, leaving a long end for stitching parts. The soles are knitted the same way for both models.

>

Assembly. Short socks
Assembly: sew 3 hexagons of the upper part, as shown in the diagram, connecting 1 st of each part to each other on the wrong side. Then, with a hidden seam, sew the sole to the upper part, aligning the center of the heel of the sole with the seam of the upper part, the center of the toe of the sole with the middle angle of the hexagon that forms the instep.
The upper strap of the short toe: fasten the dark green thread at the level of the seam of the center of the heel, 2 air. lifting point, 1 half-st. in each loop and 2 half. in the middle half each corner of the hexagon; 1 connection Art. in the 2nd air. lifting point; cut and fasten the thread.

Assembly. Long socks
Assembly: sew 5 hexagons of the upper part, as shown in the diagram, connecting 1 p. of each part to each other in the out. side. Make sure that the larger hexagons are on top, forming the shaft. Then, with a hidden seam, sew the sole to the upper part, aligning the center of the heel with the seam.
the upper part, the center of the toe is with the average angle of the hexagon forming the instep.

Top bar of long socks: fasten the dark green thread in one of the corners of the hexagon.

1st p.: 1 air. n. and 1 half. in the same loop, * 1 st. b / n next. 2 p., 1 half. in a trace. 4 p., 1 st. s / n in the next. 4 p., 1 st. s / 2n in the last 2 p. of the same hexagon, 1 st. s / 2n in the first 2 p. next. hexagon, 1 tbsp. s / n in the next. 4 p., 1 half. in a trace. 4 p., 1 st. b / n next. 4 p., repeat from *, replacing the last art. b / n for 1 connection. Art. in the air lifting point; trim and
fasten the thread.
2nd p.: fasten the yellow-green thread in the conn. Art. 1st river, 3 air. lifting, 1 tbsp. s / n in each loop, 1 connection. Art. in the 3rd air. n. lifting a row; cut out to fasten the thread.

3rd p .: fasten the dark green thread in the conn. Art. 2nd river, 3 air. lifting point and 1 tbsp. s / n in the same loop, * 1 air. p., skip 1 p., knit together 2 tbsp. s / n, repeat from *, 1 conn. Art. in the 3rd air. lifting point; cut and fasten the thread.
4th row: fasten the blue thread in one of the air. p. 3rd river, 3 air. lifting and knit together 2 tbsp. s / n in the same loop, * 1 air. p., knit together 3 tbsp. s / n in the next. air n., repeat from *, 1 conn. Art. in the 3rd air. n. row; cut and fasten the thread.
5th p.: fasten the yellow-green thread in one of the air. n. 4th river, 1 air. lifting, 2 tbsp. b / n in each air. n. 4th p., 1 conn. Art. in the air lifting item.; cut and fasten the thread.
6th p .: fasten the dark green thread in the conn. Art. 5th river, 1 air. n. and 1 tbsp. b / n in the same loop, * 1 air. p., skip 1 p., 1 tbsp. b / n next. n., repeat from *, 1 conn. Art. in the 1st air. n. row; cut and fasten the thread.
7th p.: knit with a blue thread like the 5th p.
8th row: knit with a yellow-green thread as the 6th row. 9th row: knit with a dark green thread like the 5th row; cut and fasten the thread.

Source Knitting magazine "Knitting is your hobby"

In the cold season, we really want the legs to be constantly warm, and only if they suddenly freeze, then the next day we may have a runny nose and a cold. Even when we are at home, it is necessary to give our legs warmth and comfort, and comfortable and warm knitted slippers will help us with this. With our scheme, any needlewoman who knows how to crochet will be able to create personal and unique hexagon knitted slippers using a standard crochet hook. This thing, which we create with our own hands with a scheme, will be the only and unique of its kind, unlike any other. To do this, we will need to spend quite a bit of time and money on creating such shoes. Those who have been doing needlework for a long time can create such beautiful slippers for themselves faster, and those who have not yet started knitting will need to learn this skill.

Home slippers should not only be warm and comfortable, but also delight us with their beauty and uniqueness.

It will be quite easy to tie the slippers, and most importantly, remember that when manufacturing, it would be better to add a synthetic or other very strong thread to the main thread, then the sole will turn out to be much stronger, which means that such slippers will last longer.

Crochet warm hexagon slippers with a pattern

According to this master class with a very detailed description, it will be easy to learn how to crochet beautiful house slippers from hexagonal motifs. Slippers will consist of three large hexagonal motifs. For their manufacture, you can use threads of various colors or any leftover yarn and knitted soles. The yarn to create our slippers should be thick and dense enough, because. if the threads are thin, then we will have to use them in several additions.

For manufacturing you will need:

Yarn is better than two different colors: pink about 150g and blue about 75g;
Hook number 3.5.

This master class of slippers for the 39th size.

Detailed description of the knitting process of the slipper sole:

We will knit the sole of our slipper with a thread in two additions to make it thicker and more durable. We make the initial loop on the hook, we will dial 5 air.p. + 2 air.p. to lift the first row.
The sole of the slipper should be knitted in straight and reverse rows with half-columns, and at the beginning of each new row, two lifting air loops should be made.
If you need to add one half-column, then two columns must be connected from one loop. If you need to reduce the half-column, then we make a crochet, insert the hook into the first loop along the row, pull the loop onto the hook, then into the second loop along the row, pull another loop onto the hook, and then, having captured our working thread, we knit all the loops with hook.
In the first row, when knitting the sole, you need to start knitting half-columns from the 3rd loop from the hook. At the same time, knit two half-columns from the first and last loops of the chain, in total there are 7 half-columns in a row.
Further, in the second row, also make additions from the first and last loops of the row, you should get 9 half-columns. Next, knit the track up to the 10th row without any additions.
In the 11th, 12th, 13th and 14th row we make additions from the first loop of the row. The number of half-columns should increase to 14, which is necessary for the expansion of the foot.
Having connected such a track 20 cm long, at the next stage in the last two rows, reduce the first two and the last two half-columns. And only then we cut and fasten the thread.

Detailed description of knitting a hexagonal motif:

We make the initial loop on the hook, dial 5 air points, lock them into a ring conn. Art.
To start knitting our first row, you need to make 4 air p. lifting, from the ring, tie 17 tbsp. s / 2n. We complete the row with a connecting column in the 4th lifting loop.
We introduce a thread of a different color into our work. We start the second row of the motive with 3 air.p. lift. Yarn over, insert your hook at the starting point and pull up a long loop on the hook, repeat again. We knit all the loops from the hook and make 1 air p.
To start knitting the second magnificent column, it is necessary to make a crochet on the hook, insert it into the next loop along the row, pull out a long loop, repeat 2 more times: yarn over, hook into the same loop, pull out a long loop. We knit all the loops from the hook, fasten the magnificent column with an air loop and make another air loop.
In total, in the second row we knit 18 lush columns from each loop of the first row, between the lush columns we make 1 air p. Our series of connections is coming to an end. to the top of the first magnificent st.
The 3rd row is knitted with a thread from the first row. We stretch it on the wrong side. We do 2 air.p. rise, then yarn over, hook between the lush columns of the second row, knit a yarn over, a new yarn over, then a hook to the top of the next magnificent st., knit a yarn over, then knit all the loops from the hook and make 2 air p. Next, we continue to knit, repeating 3 columns with one vertex and 2 air p. We are finishing a series of connections. Art.
Let's change the color of the working thread again. From the first arch we knit 3 air.p. lifting and 4 tbsp. s / n, then repeat twice 3 tbsp. s / n and once 5 tbsp. s / n from the arches of the previous row. Let's finish a series of connections. Art. in the 3rd loop of the lift.
The final row is knitted. b / n from each loop, only from the middle loop of a group of 5 sts s / n, knit 3 tbsp. b / n, these are the tops of our hexagonal motif. Let's complete a series of connections. Art., cut and fasten the thread.

Let's assemble the slippers:

Having fully connected the three motifs, we will fold them in the form of a triangle, and its top will be the toe of the slipper.
Let's make a slipper side seam, for this we will connect three motifs on two sides. At the same time, we knit a series of connecting posts along the edge of the motifs, introducing a hook for the half-loops of two motifs from one to the other top. Let's connect two motives on one side, take the third motive and attach it to the first one on the other side.
Let's skip the two inner sides of our second and third motives, and we also sew the next sides of these motives with a row of connecting posts - this will be the heel seam of our slippers.
We will assemble the upper part of the slipper from three motives, sew it to the finished knitted footprint. To do this, connect the center of the heel with the center of the footprint, and the top of the toe with the center of the toe on the sole. You can sew the top of the slipper to the sole with a needle or also with a hook, knitting a series of connecting posts along the edge, inserting the hook into the half-loops of the motifs and the sole.

Our second hexagon slippers are knitted in the same way as the first.

Here are a couple of slippers and ready!

You can use many colors of yarn, it all depends on how you would like to see them, on tastes, desires and moods. Such slippers can also be knitted for members of your family.