home › parables › Types of weaving bracelets from rubber bands on the fingers. Rubber bracelets how to weave

Types of weaving bracelets from rubber bands on the fingers. Rubber bracelets how to weave

Weaving from rubber bands has taken over the world. Everyone weaves rubber bracelets. And then they are worn. Even men wear it. Men themselves are passionate about weaving baubles from rubber bands. Today you will learn the newest and most interesting weaving from rubber bands. Learn how to weave fashionable bracelets and baubles.

How to weave baubles from rubber bands? First, you need to decide what kind of bracelet you will weave. Secondly, choose a color combination for your bracelet. It depends on what kind of bauble you will weave, how to weave. On the machine, crochet, on a slingshot or on a fork? Or maybe on pencils or on fingers?

Most rubber bracelets are woven on a loom. Complex and thick bracelets definitely cannot be made on pencils, fingers or on a fork. All complex weaving is done on a loom or crocheted.

On the loom, you can weave such bracelets from elastic bands as French braid, Dragon scales, Asterisk, Weave hearts and others. You can make the same bracelets with different weaving techniques. We have already described in detail how to learn to weave with different techniques in our article -.

Another type of weaving bracelets is weaving on a slingshot. What kind of bracelets can be made? Basically, on a slingshot, it turns out to make only simple and thin bracelets and baubles. The simplicity of the tool does not negate the ability to make thin, but interesting weaving of baubles from rubber bands.

One of the most beautiful rubber bracelets is the Asterisk. She weaves on the loom. To do this, you will need at least two colors of elastic bands, and more can be.

How to weave an Asterisk bracelet from rubber bands? To do this, put the elastic bands in the right order on the columns of the machine, having done a certain chain of actions, you simply remove your weaving from the machine and you have in your hands a fashionable Asterisk bauble. After that, you make special locks on the ends, and your bracelet is ready. You can learn how to make such beauty with the help of a video tutorial on weaving a bracelet:

Another popular pattern for rubber bracelets is the so-called Dragon Scale. This type of weaving is also called Dragon Scales. The bracelet is a beautiful mesh of rubber bands. You will make a bracelet multi-colored or plain - it's up to you. But in any case, such weaving will be equally stylish and bright.

If you wish, you can make a Dragon Scale bracelet from rubber bands on a fork, a small loom or a slingshot. You will get exactly the same result as on the machine, only less in thickness. Due to the smaller number of columns.

You will learn how to weave a Dragon Scale rubber bracelet from the video of the master class.

You can also watch all the video tutorials of gum weaving experts - find out how to weave other charming bracelets and baubles on the loom from our article

There are several varieties of the Fishtail bracelet. Simple single ply fishtail, double ply, three ply, four ply fishtail or squarefish. Fishtail baubles are also divided into simple and complex. A simple fishtail bracelet can be made on a slingshot, on a loom or on fingers, a more complex fishtail is made on a loom.

You can come up with a variety of patterns on a thick Fishtail bracelet. For example, based on this weaving.

You can find a complete collection of video master classes on weaving a Fishtail bracelet from rubber bands in our article -.

Bracelet made of rubber bands Angel's Heart is a stunningly beautiful bracelet that really resembles hearts. Kind, positive and bright bracelet. It seems that everyone who wears it gets a boost of energy for a long time. How to weave such a bracelet from rubber bands?

You can make such a bracelet both on a loom and on a slingshot. Made bracelets will be no different, even when made completely differently. To perform weaving, you will need a lot of bright elastic bands, a weaving machine, a hook, and clasps for a bracelet. Choose strong elastic bands that will not burst during weaving.

A simple but very stylish bracelet made of rubber bands. This bracelet is preferred by men. Even celebrities wear rubber bracelets.

You can choose absolutely any colors for weaving, make it plain or with all the colors of the rainbow. How to weave such a bauble? The bracelet is not complicated, you can do without watching the video. Everything is quite accessible on the diagrams and step-by-step photographs. But on what to weave a French braid bracelet - on a loom or a slingshot - it's up to you. There is only one result - a stylish bracelet made of rainbow rubber bands.

You will find a detailed master class on weaving a bracelet in our article -.

Rubber band bracelet with flower

Incredibly beautiful with complex weaving - a bracelet made of rubber bands with a flower. Such a bracelet not only cheers up, but also decorates any outfit. The most interesting thing is that all gum bracelets, key chains, figurines, toys - all gum crafts energize with their iridescent rich colors and pleasant texture.

Now you know what bracelets and baubles you can make from rubber bands. And most importantly, how to weave bracelets. Please yourself and your loved ones with rainbow bracelets and rubber band crafts - give them a piece of your love and warmth.

With love, Editorial Yavmode.ru

Interest in bright and unusual jewelry is always great. Especially if it is a unique thing, made in a single copy. In summer, I really want to add colors to the image, emphasize a beautiful tan. It is not at all necessary to spend huge sums in jewelry stores or empty the counters with jewelry for this. It is enough to learn how to weave bracelets from elastic bands - and an unusual accessory will very quickly be on your wrist.

The color range of rubber bracelets is very diverse.

An elastic band bracelet can be created for each outfit or for a specific event. There are many ways to weave, and the color range of the material is endless.

A bit of history

The idea to combine soft leather rings into beautiful bracelets or belts was born long before mankind knew about rubber. Most often these were women's amulets, military amulets or festive belts. Then this technique was forgotten for a long time. The children were the first to remember her. Accounting colored rubber bands for money attracted attention precisely with their non-standard properties - elasticity and ability to keep their shape, softness of fit and sufficient strength. In 2010, the world was covered by a wave of popularity of weaving rubber bands. Everyone was carried away by this: adults and children, women and men, boys and girls. In some places, there were even competitions in this weaving for the speed and originality of knitting.

But elastic bands are quite difficult to tie in a knot. This was noticed by Chong Chun Ng, a Malaysian immigrant of Chinese origin who worked as an engineer at a Nissan plant in the US. His daughters diligently tried to build jewelry from accounting rubber bands, but knots were not given to them. A loving father figured out how to make this process easier for them. On a wooden board, he fixed a row of studs and purchased a dental hook. Weaving on the machine caused delight. The whole family was involved in inventing new schemes and methods. Gradually, the machine changed: the cloves were replaced with rearranged plastic pegs, in which there was a special cavity for the convenience of clinging, convenient hooks and a “slingshot” were added. The patent was taken on the Twistz Bandz toy, but when the inventor wanted to put his invention on sale, it turned out that hair ties were produced under the same name in China. They turned out to be a more suitable material for weaving, because they had an impressive range of colors, and the patterns turned out to be more openwork. At the family council, it was decided to give the product a new name - Rainbow Loom. It was under this name that the whole world learned about this exciting activity.

Rainbow Loom is not just about creating playful or elegant decorations. Weaving requires perseverance, attention, finger dexterity. All this is the development of fine motor skills, a connection with the development of speech and memory. That's why Rainbow Loom has become fantastically popular with kids and parents alike. For 3 years, over a million sets have been sold. The toy has become one of the most popular in the world.

In schools in some states, the administration was forced to impose a ban on the toy, as children were distracted from their studies. Cases of injury by bursting rubber bands of the eyes were noted, children sometimes pulled their fingers up to the threat of necrosis. But nothing could stop the victorious march of colorful woven rubber crafts around the world.

What can be weaved

Bracelets and rings are the first thing that comes to mind when looking at bright toy boxes. But the ingenuity of enthusiasts knows no limits. Weave animals, handbags, key chains, cases for smartphones, necklaces. The range depends on experience and flight of fancy.

You don't have to limit yourself to rubber bands. Surely there are large beads, decorative rings, bright ribbons, elegant lace, sparkling sequins. On a large loom with a “fish net” pattern, craftsmen weave full-fledged elements of clothing - high openwork cuffs that pick up flying sleeves made of chiffon and silk. Brutal biker outfits look unusual, complemented by wicker bands on caps or bracelets with metal inserts.

Children prefer to weave cute animals, create fruits or berries, give their favorite doll a fashionable handbag. Teenagers are crazy about the "baubles" of rubber bands, and color combinations are important for them.

Special place of bracelets

Bracelets remain the most popular rubber band products. Girlfriends exchange them, weave them for gifts, arrange real weaving marathons. A lot of video instructions have appeared on the Internet telling how to make a bracelet out of rubber bands. They can be created on the machine, use a slingshot or fork, limit yourself to your own fingers.

On a note! The final result depends on the chosen weaving scheme, additional decorative elements, width and color scheme.

Young women of fashion not only flaunt mischievous "baubles". They are given as a sign of special friendship and are collected. There is even a special language "baubles" that communicates the mood and status of the owner in a particular youth company. But more often than not, it's a great way to have fun and have fun creating a new piece of jewelry.

If there is no machine nearby

The easiest way is to use only your fingers and the clasp included in the kit. The bracelet is narrow, just right for a child's hand. Available patterns will be "fishtail", "rain", "sidewalk" and some others.

Rubber bracelet - weaving "rain"

The technique of weaving "on the fingers" is quite simple:

prepare elastic bands, preferably 2-3 colors, and a fastener for fastening;
choose a specific weaving pattern (they can be found in the instructions for the kits) and follow it step by step;
fasten the clasp firmly.

A well-chosen color combination or weaving method will help create a decoration that adequately emphasizes the image. Some of the rubber bands can be placed with cute pendants, turning the bracelet into a gift with a hint.

Slingshot or fork

Each set includes a simple tool for weaving a bracelet on a slingshot. This is really a slingshot, in which 3 plastic pegs are connected in the center, 2 in parallel in one direction and 1 in the diametrically opposite direction. Rubber bands are placed on parallel pegs according to the schemes. Weave them together with a hook, stretching the loops. Gradually adding new elastic bands, weave a bracelet. Such jewelry will have a clearer faceted edge, and well-chosen details in color will favorably distinguish the owner of the bracelet.

Each set includes a simple device for weaving a bracelet on a slingshot

If the slingshot is lost, a plastic fork will successfully replace it. There are patterns of weaving on 4 teeth. The difficulty is that the teeth of the fork often have rather sharp edges and can cut the gum at the most crucial moment.

rainbow machine

The most complex and colorful bracelets are machine-made. Pegs allow you to free your hands and easily weave pendants, ribbons and beads into jewelry. Such bracelets are even worthy of an evening out. The most popular schemes are “sidewalk”, “caterpillar”, “snowflake”, “rain”, “French braid”. Particularly experienced master the "spider" and "stars". Wide bracelets (cuffs) are woven from multi-color elastic bands according to the “scales” pattern. This is a rather large-mesh pattern, so this bracelet does not require additional decoration. It is good on its own, especially if you pick up elastic bands in the color of a real rainbow. The width directly depends on the width of the machine itself. You can make decoration up to 10 cm wide.

Elastic band bracelet - weaving "dragon scales"

The main difficulty of weaving on the machine is in exact accordance with the pattern. A video instruction will come to the rescue, where the sequence of actions is scrupulously explained and advice is given on the selection of materials. If you plan to add beads or pendants, it is better to use transparent elastic bands for this so as not to distort the color of the decor.

Attention clasp

Each set includes a pack of clear plastic fasteners. They are necessary to create a reliable fastener. Usually this is a small hook and the second part is a clip in the form of a figure eight. Despite the seeming fragility, they provide a fairly strong fixation of the bracelet on the wrist. It is very important to know how to securely tie the elastic on the bracelet with the clip.

The clip is used on the simplest bracelets, which are performed on fingers or on a slingshot. To do this, the elastic is simply placed on the clip, stretched to be pulled through a narrow gap in the clasp. A node is not formed in this case.

Each set includes a pack of clear plastic fasteners

Complex bracelets are fastened with a clasp. To do this, one part is woven into the bracelet already on the first elastic band. The last rubber bands are removed according to the scheme until one elastic band remains. It is pulled tight and threaded into the second part. After that, the tension is loosened, and the elastic is tightly fixed in the clasp. This method is perfect for completing work on a slingshot and machine.

Sometimes a clasp is not required if a ribbon was woven into the bracelet. It is she who will play the role of the fastener. A spectacular bow looks great with a festive outfit. The last elastic bands must be passed through each other until a loop of 1-2 elastic bands remains. A tape is pulled through it, and a fixing knot is formed.

On a note! If there is no fastener or clip at hand, the coils of elastic bands are fixed with a simple thread or a torn elastic band.

Lovely jewelry does not lose its popularity. Opponents have only one counterargument left - ecology. Indeed, rubber bands do not decompose at all. But who said that a boring bracelet should be thrown away? Just dissolve it, arm yourself with new decorative elements, show your imagination - and you will get a new original decoration. This is especially important for co-creation with children.

Elizabeth Rumyantseva

For diligence and art there is nothing impossible.

Content

Weaving from rubber bands is a new, popular direction in creativity, which people in different parts of the world are interested in. Entertainment was of particular interest to children and adolescents, as it is an opportunity to make original accessories from available materials to create a stylish look. From rainbow loom, after a little practice, even a child will be able to create unique products on the machine - bracelets, beads, key rings. The beauty of loom bands sets is that they include multi-colored elastic bands, all the necessary attributes.

Step-by-step instructions and patterns for weaving bracelets on the loom

Weaving chic products from rubber bands on the machine has its advantages and deservedly won its admirers:

Relatively low cost of materials.
Wide range of rubber bands.
An interesting, simple, fascinating process of creating masterpieces.
The ability to create a unique accessory, using additional beads, figurines.
Having mastered simple patterns, having studied weaving lessons in different ways, it is possible to create complex, beautiful products, come up with new options, techniques for creating jewelry.

How to make dragon scales

To create an accessory, you will need to install the machine so that it is all in front of your eyes. The order of creation of the decoration "Dragon Scales":

We twist the elastic band with a figure eight away from us and put it on two columns.
The next 3 are put on the nearest pegs, but twisted into a figure eight towards themselves, connecting, 1-2, 3-4, 5-6, 7-8 columns.

We put on the next row, twisting the elements towards ourselves, connecting the columns in this order: 2-3, 4-5, 6-7.
For weaving, it is necessary on pegs, where there is more than 1 elastic band, to throw the lower one up through the column. Manipulate all elements.

For convenience, lower the gum a little down.
We dress loom bands of a different color without twisting them, following the order 1-2, 3-4, 5-6, 7-8. We take the lower rows, throw them up.
Then 3 elastic bands alternate in rows, then 4, and for weaving the lower elements are thrown up.
A kind of mesh with a beautiful pattern is formed.

To complete the elastic band from three columns, we connect on one, dropping the bottom row. On the remaining loops we cling to the fastener. We carry out the same manipulation with the remaining elements.

Watch the video to finally understand the technique of creating a stylish decoration using the Dragon Scale technique:

Weaving a bracelet "Triple fishtail"

Try one of the fishtail weaving options. To weave a Triple Fishtail ornament, the loom must be adjusted so that the left row is one pin closer. In total, 2 strips of columns are required. Step by step:

We take an elastic band, turn it over with a figure eight and put it on pegs, connecting in parallel. So you need to put on 3 things, you get 6 pins involved - three from each row.

We connect the three columns of the left row with the main elastic band.
We put on elastic bands of a different color, connecting two rows, as in paragraph 1, but without twisting them. We repeat point 2.
We put on the third layer of a different color, do not twist it, but connect the pins of the left row on top with one rubber band.
We start weaving: from the left row we drop the lower main elastic band into the center of the work. From all the pins we drop the bottom layer into the middle. It is important to remember one rule - from the right row we hook loom bands from the outside, from the left - from the middle.

We continue to create a masterpiece: we put elements of the desired color on the columns, connect the pins of the left row with the main element and weave according to the above scheme.
To finish the product, it is necessary to weave all the remaining elastic bands according to the scheme, without adding new ones. The remaining elements must be thrown onto the pins of the left row and fastened with fasteners.

Watch the video to see with your own eyes the decoration technique and try to make a similar masterpiece with your own hands:

Weave a bracelet "French braid"

To weave a bracelet using the French braid technique, you will need elastic bands of two shades, in the example light green and yellow were used. The order of the bracelet:

We put on a green elastic band on the sled, twisting it with a figure eight.

Further - yellow and green, dress without twisting.
Remove the first green element with a hook and put it on top of the other two, first on one side, then on the other. It turns out that the first elastic band hangs on the other two.
We put on a yellow elastic band without twisting. We remove the green loom bands from the right peg and put it on top, and from the left - the lower yellow one and also throw it up.
The creation scheme looks like this: on the one hand, a contrasting central elastic band is removed, and on the other (where two are identical) - the lower one. Weave a bracelet of the required length in this way.

At the end we hook the S-shaped hook-clasp, the decoration is ready.

Watch a visual video on weaving a French braid bracelet:

Bracelet called "Rain"

Learning to weave a rain bracelet. Consider the execution sequence:

We twist the rainbow loom and put it on the 1st and 2nd columns, the second, twisting the eight on the 1st and 3rd pins.
We dress the next element on columns 1 and 4.
In the same order, we put on the second row of elastic bands, but do not twist them.
When all the elements are in place, we proceed to weaving: remove the lower elastic band from the first column and put it on top, then remove the very first one from the second pin and throw it up, do the same with the rest.
In the same order, again we put on the loom bands without twisting: 1 and 2, 1 and 3, 1 and 4 pins.
We continue to weave by analogy, throwing the lower elements parallel to each other up.
Weaving to the desired size, we fasten the clasp, the next masterpiece is ready.

Watch the video to learn some secrets of making rainbow loom bracelets using this technique:

How to make an asterisk style

Step-by-step implementation of a stylish Asterisk bracelet:

We set up the machine: it is necessary to set it so that in the second row the columns are staggered relative to the first and third.
We put blue rubber bands on the first columns of the left row, connecting them. We continue to connect the pegs to the end.
At the end: connect the penultimate peg of the left row and the last central one.

We begin to weave an asterisk: put an orange elastic band on the second column of the left row and 2 central ones. We put on the rest of the rainbow loom in a clockwise direction to form a star. By analogy, we make a pattern to the end of the product.
On the last column of the central row, you need to put on loom bands, twisting it in half with a figure eight. Put similar "eights" on the middle of the stars and the first column.
We turn the machine so that the columns are hollow side to face.
We lower the hook into the first column of the central row and, catching the orange elastic band, pull it out and put it on the second.
We lower the hook into the middle of the asterisk, remove the upper orange rubber band and put it on the column from which it comes. Against the clockwise direction, we similarly draw out all the orange rubber bands. Weave stars to the end of the product.

Weave the base of the bracelet: pull out the lower blue elastic band from the first peg of the central row and put it on the second pin on the left.
Next, take off the loom bands from the second column of the left row and put them on the third.
Carefully remove the bracelet from the machine, fasten the clasps.

To see the whole process in action, watch the video:

Rubber bracelet "Caterpillar"

Weaving guide:

We twist the rubber band of the main color with a figure eight and put it on the pins of the loom diagonally. We do the same with the second element.

We put on the next 4 rows diagonally, without twisting.
We start weaving: we hook the lower elastic band on the outside of the loom with a hook and put it on top of the rest.
We carry out the same manipulation with all the elements that were initially twisted.

We put on diagonally, without twisting 2 elastic bands, remove the bottom row to the center.
We weave the accessory to the required length. To secure, remove all the rainbow rubber bands remaining on the posts on the hook, pull and put on the fastener on one side, then on the other.

It is possible to understand some points, to see everything with your own eyes by watching a video with a detailed master class on creating an accessory in the Caterpillar style:

Video tutorial on weaving a bracelet from elastic bands on a mini-loom

In order to weave beautiful original rainbow loom accessories, you need a little imagination, weaving skills according to simple patterns and a desire to create a unique thing. The methods of creation are somewhat similar, they differ only in small nuances, thanks to which new designs and stylish bracelets are obtained. Master classes will help you learn complex techniques, the secrets of weaving. For an example of such a lesson, look at the video, which describes in detail and shows the sequence of execution, so there will be no problems with weaving and the result will be great work:

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

Bright and original bracelets made of elastic bands are a trendy inexpensive accessory today. Children are absolutely delighted with this activity that develops their creative abilities! Many little fashionistas want to have such a beautiful item in their collection of everyday jewelry.

Most of the kids and their mothers, as well as teenage girls of the beautiful half of humanity, want to know how to weave bracelets from rubber bands on a slingshot. There is nothing difficult in this! It only takes a little time, imagination for creativity and special Rainbow Loom kits.

Mix business with pleasure

Weaving bracelets from rubber bands on a slingshot conquered the whole world. It originated in the USA. Girls, girls and women are happy to make this type of creativity their hobby, because it helps to combine business with pleasure. An interesting pastime for unusual needlework leads to excellent results.

Now you can choose from a large number of unique elegant jewelry that matches the color of your outfit with a wonderful bracelet, or even more than one. Such a wonderful product of your own creativity will be an original and pleasant gift for any birthday girl or for every woman on March 8th.

Among other things, bracelets made of rubber bands on a slingshot – it is a practical accessory that is not afraid of water and does not require, in general, any care. They are ideal for wearing on the beach: they will help to create a beautiful bright look and perfectly emphasize the originality of a bathing suit.

In these bracelets you can safely sunbathe and go into the pond. They do not fade when exposed to ultraviolet rays and are difficult to lose because they do not slip off wet hands.

What you need in order to create beautiful bracelets from rubber bands

The standard Rainbow Loom creative kit includes everything you need:

Special machine;
Slingshot for weaving;
Clips for connecting bracelets;
Small elastic bands for weaving in different colors, ranging from standard ones to unusual rare tones.

After purchasing the set, beginners need to attend lessons in weaving bracelets from rubber bands on a slingshot from experienced craftswomen in order to quickly learn how to create unique masterpieces on their own.

How to weave this original type of accessories

Bracelets made of rubber bands have completely different ways of weaving on a slingshot. With a little imagination, you can create truly unique things.

For the first bracelets made of rubber bands on a slingshot, it is better to choose the simplest ones. These include "fishtail", "French braid" and so on.

Consider how to weave a bracelet from rubber bands on a slingshot

It is necessary to prepare a slingshot, a special hook, a connecting clip and rubber bands for weaving several colors to choose from.
The rubber band is put on a slingshot with a figure eight. A couple more rubber bands of different colors are hooked from below and twisted.
With the help of a hook, the lowest elastic band is threaded from two sides. As a result, it should be on top of the rest of the rubber bands.
Then you need to put on another elastic band on top and twist it.
The same must be done with the previous gum. Should be a small chain.
Then we put another rubber band on the slingshot and with a hook we drag the elastic band located below, upward from two sides.
The result should be a wonderful unusual chain. Weaving length is optional.
At the end, you need to attach a connecting clip so that the product does not fall apart.

Rainbow Loom French Braid

Bracelets made of rubber bands on a French braid slingshot machine are made very simply. The result is a chic weave that looks very complex. Here's how to create a "French braid":

Rubber bands from the Rainbow Loom creative kit can be taken in one color, or you can take several bright shades. You will also need a slingshot machine.
We fasten the first rubber band on the slingshot with a figure eight.
From above it is necessary to put on two more exactly, without a figure eight.
The loop of the lower rubber band with the help of a hook must be pulled off with a hook, removed and left in the center of the machine. A similar action is performed with the second loop of the same rubber band.
The next rubber band is put on the machine for reconciliation.
The loops of the lower elastic bands must be removed from the slingshot in the manner described above and left in the center.
Then it is necessary to thread another rubber band, preferably of a different color, through the obtained loops with a hook.
We put on the loops of the new rubber band on the slingshot and then we put on another rubber band.
Then we remove the loops to the center of the machine.
Weaving continues until the required length of the bracelet is made.
Then you can braid the first bracelet with the second and thus make it voluminous and two-color.
The procedure is repeated braiding the bracelet.
At the end we attach the connecting clip.

The second version of weaving a multi-colored bracelet of three colors

Weaves similarly to the above, only the colors change rhythmically.

The lower elastic is worn with a figure eight.
The remaining two colors are not exactly a figure eight.
Further, using a hook, elastic bands are strung on the sides to the center.
Then put the Rainbow Loom elastic on the slingshot again and repeat weaving to the desired length of the bracelet.
Then, at the very end, fasten it on hooks and decorate with an original pendant.

It will take about twenty minutes to weave bracelets on a slingshot with rubber bands. Such an interesting hobby is very suitable for young mothers who have little free time. Colored and original handmade bracelets will serve as excellent amulets for their daughters and will bring an interesting colorful zest to the gentle image of a little naughty girl. And will be a great activity for the development of creative abilities in children.

Lessons (master classes) of fashionable weaving from elastic bands for beginners: how to weave the simplest bracelet - a chain of elastic bands without a machine - 5 weaving options.

The second lesson from the series "Weaving from rubber bands". A list of lessons with links is at the end of the article.

Ways to weave the simplest rubber band bracelet without a machine

You can weave a beautiful openwork bracelet - a chain of rubber bands without a loom in many ways: crocheted, on fingers, on a table fork, on pencils or on a loom - fork.

Only crocheting without other devices is slightly different from the rest. But this is not the easiest way, so I recommend learning to weave on fingers or pencils if there is no special fork machine.

These methods are more convenient than crocheting, and are very similar to each other, the only difference is in the devices that the rubber bands are worn on. The first gum is always twisted into a figure eight, all the following ones are dressed evenly. The loops of each lower rubber band are removed through the upper one.

Choice of colors

weave rubber bands of the same color
alternate two, three, or more colors in a specific order (for example, alternating red and yellow, or alternating the colors of the rainbow)
weave in different colors, taken at random

How to weave a simple rubber band bracelet without a crochet machine

Twist one rubber band with a figure eight, fold in half, attach a clasp.
Thread the hook through the doubled rubber band.
Crochet the second elastic band.
Pass it to the middle through the first.
Pass the hook through both loops of the second rubber band.
Crochet the third elastic band.
Pass it to the middle through the second.
Pass the hook through both loops of the third rubber band.

How to weave a simple bracelet without a loom and hook

Instead of a machine, you can use your fingers, a table fork, pencils, or a homemade slingshot made from a tree branch (see detailed descriptions with photos later in the article and choose the method that you like best).

You can also do without a hook when weaving simple bracelets, for this, transfer the lower elastic bands to the upper ones not with a hook, but by taking them with your fingers.

How to weave a simple rubber band bracelet without a loom on your fingers

My daughter Rita will show you how to weave a simple bracelet from rubber bands on your fingers. This is one of the most famous and popular ways to weave a simple bracelet without a loom, but to be honest, it is not the most convenient. Rubber bands squeeze fingers. If you need to interrupt the weaving, the chain has to be removed from the fingers and put on again after a while, and beginners do not always succeed in doing this correctly.

Put one rubber band on your finger, twist it with a figure eight and put the resulting loop on the second finger.
Attach clasp.
Put the second rubber band on top evenly, without twisting.
With a hook or fingers, remove the lower elastic band from the fingers so that both of its loops are on the upper elastic band (the upper elastic band does not need to be removed yet).
Remove the lower rubber band from the fingers so that both of its loops are on the upper elastic band.
Put on the third rubber band on top.
Weave in this way to the desired length.
After that, thread both loops of the last rubber band into the other end of the fastener.

How to weave a simple rubber band bracelet without a loom on a fork

Weaving takes place in exactly the same way as on the fingers, only instead of fingers, rubber bands are put on the teeth of the fork. Also not a very convenient way, because. sometimes the removed rubber bands cling to the internal teeth.

How to weave a simple rubber band bracelet without a pencil loom

Weaving on pencils is exactly the same as on fingers and a fork, only it is much more convenient. To make a homemade machine out of them, you need to arrange three pencils in one row so that the two extreme ones are above the middle one, and wrap them with tape.

How to weave a simple rubber band bracelet on a slingshot

It is most convenient to weave on a machine - a slingshot or a machine - a fork. For those who have figured out weaving on fingers, a fork and pencils, it will not be difficult to make a bracelet - a chain on such a machine.